290 lines
9.9 KiB
Plaintext
290 lines
9.9 KiB
Plaintext
$NetBSD: hardware,v 1.28 1998/02/13 04:22:11 enami Exp $
|
|
|
|
NetBSD/i386 _VER runs on ISA (AT-Bus), EISA, PCI, and VL-bus systems
|
|
with 386-family processors, with or without math coprocessors. It
|
|
does NOT support MCA systems, such as some IBM PS/2 systems. The
|
|
minimal configuration is said to require 4M of RAM and 50M of disk
|
|
space, though we do not know of anyone running with a system quite
|
|
this minimal today. To install the entire system requires much more
|
|
disk space (the unpacked binary distribution, without sources,
|
|
requires at least 65M without counting space needed for swap space,
|
|
etc), and to run X or compile the system, more RAM is recommended.
|
|
(4M of RAM will actually allow you to run X and/or compile, but it
|
|
won't be speedy. Note that until you have around 16M of RAM, getting
|
|
more RAM is more important than getting a faster CPU.)
|
|
|
|
Supported devices include:
|
|
Floppy controllers.
|
|
MFM, ESDI, IDE, and RLL hard disk controllers.
|
|
SCSI host adapters:
|
|
Adaptec AHA-154xA, -B, -C, and -CF
|
|
Adaptec AHA-174x
|
|
Adaptec AIC-6260 and AIC-6360 based boards, including
|
|
the Adaptec AHA-152x, Adaptec APA-1460 (PCMCIA),
|
|
and the SoundBlaster SCSI host adapter. (Note
|
|
that you cannot boot from these boards if they
|
|
do not have a boot ROM; only the AHA-152x and
|
|
motherboards using this chip are likely to be
|
|
bootable, consequently.)
|
|
Adaptec AHA-2x4x[U][W] cards and some onboard PCI designs
|
|
using the AIC78X0 chip.
|
|
Adaptec AHA-3940[U][W] cards [b]
|
|
BusLogic 54x (Adaptec AHA-154x clones)
|
|
BusLogic 445, 74x, 9xx (But not the new "FlashPoint" series
|
|
of BusLogic SCSI adapters)
|
|
Qlogic ISP [12]0x0 SCSI/FibreChannel boards
|
|
Seagate/Future Domain ISA SCSI adapter cards, including
|
|
ST01/02
|
|
Future Domain TMC-885
|
|
Future Domain TMC-950
|
|
Symbios Logic (NCR) 53C8xx-based PCI SCSI host adapters:
|
|
Acculogic PCIpport
|
|
ASUS SC-200 (requires NCR BIOS on motherboard to
|
|
boot from disks)
|
|
ASUS SC-875
|
|
ASUS SP3[G] motherboard onboard SCSI
|
|
DEC Celebris XL/590 onboard SCSI
|
|
Diamond FirePort 40
|
|
Lomas Data SCSI adapters
|
|
NCR/SYM 8125 (and its many clones; be careful, some
|
|
of these cards have a jumper to set
|
|
the PCI interrupt; leave it on INT A!)
|
|
Promise DC540 (a particularly common OEM model of
|
|
the SYM 8125)
|
|
Tyan Yorktown
|
|
Ultrastor 14f, 34f, and (possibly) 24f
|
|
Western Digital WD7000 SCSI and TMC-7000 host adapters
|
|
(ISA cards only)
|
|
MDA, CGA, VGA, SVGA, and HGC Display Adapters. (Note that not
|
|
all of the display adapters NetBSD/i386 can work with
|
|
are supported by X. See the XFree86 FAQ for more
|
|
information.)
|
|
Serial ports:
|
|
8250/16450-based ports
|
|
16550/16650/16750-based ports
|
|
AST-style 4-port serial cards [*]
|
|
BOCA 8-port serial cards [*]
|
|
IBM PC-RT 4-port serial cards [*]
|
|
Single-port Hayes ESP serial cards [*]
|
|
Cyclades Cyclom-Y serial cards [*] [+]
|
|
Parallel ports.
|
|
Ethernet adapters:
|
|
AMD LANCE and PCnet-based ISA Ethernet adapters [*], including:
|
|
Novell NE1500T
|
|
Novell NE2100
|
|
Kingston 21xx
|
|
AMD PCnet-based PCI Ethernet adapters, including:
|
|
Addtron AE-350
|
|
BOCALANcard/PCI
|
|
SVEC FD0455
|
|
X/Lan Add-On Adapter
|
|
IBM #13H9237 PCI Ethernet Adapter
|
|
AT&T StarLAN 10, EN100, and StarLAN Fiber
|
|
3COM 3c501
|
|
3COM 3c503
|
|
3COM 3c505 [*]
|
|
3COM 3c507
|
|
3COM 3c509, 3c579, and 3c59X
|
|
3COM 3c589
|
|
Digital DC21x4x-based PCI Ethernet adapters, including:
|
|
Cogent EM1X0, EM960 (a.k.a. Adaptec ANA-69XX)
|
|
Cogent EM964 [b]
|
|
Cogent EM4XX [b]
|
|
Compex Readylink PCI
|
|
DANPEX EN-9400P3
|
|
Digital Celebris GL, GLST on-board ethernet
|
|
Digital (DEC) PCI Ethernet/Fast Ethernet adapters (all)
|
|
JCIS Condor JC1260
|
|
Linksys PCI Fast Ethernet
|
|
SMC EtherPower 10, 10/100 (PCI only!)
|
|
SMC EtherPower^2 [b]
|
|
SVEC PN0455
|
|
SVEC FD1000-TP
|
|
Znyx ZX34X
|
|
Digital EtherWORKS III ISA adapters (DE203/DE204/DE205)
|
|
Digital DEPCM-BA (PCMCIA) and DE305 (ISA) NE2000-compat. cards
|
|
BICC Isolan [* and not recently tested]
|
|
Fujitsu MB86960A/MB86965A based cards:
|
|
Fujitsu FMV-180 series
|
|
Allied-Telesis AT1700 series
|
|
Allied-Telesis RE2000 series
|
|
Intel EtherExpress 16
|
|
Intel EtherExpress PRO/10
|
|
Intel EtherExpress 100 Fast Ethernet adapters
|
|
Novell NE1000, NE2000 (ISA, PCI, PCMCIA, ISA PnP)
|
|
SMC/WD 8003, 8013, and the SMC "Elite16" ISA boards
|
|
SMC/WD 8216 (the SMC "Elite16 Ultra" ISA boards)
|
|
SMC91C9x-based boards (ISA and PCMCIA)
|
|
Texas Instruments ThunderLAN based ethernet boards:
|
|
Compaq Netelligent 10/100 TX
|
|
Compaq ProLiant Integrated Netelligent 10/100 TX
|
|
Compaq Netelligent 10 T (untested)
|
|
Compaq Integrated NetFlex 3/P
|
|
Compaq NetFlex 3/P w/ BNC (untested)
|
|
Compaq NetFlex 3/P (untested)
|
|
Compaq Dual Port Netelligent 10/100 TX (untested)
|
|
Compaq Deskpro 4000 5233MMX (untested)
|
|
Texas Instruments TravelMate 5000 series laptop
|
|
docking station Ethernet board
|
|
FDDI adapters:
|
|
Digital DEFPA PCI FDDI adapters [*] [+]
|
|
Digital DEFEA EISA FDDI adapters [*] [+]
|
|
Tape drives:
|
|
Most SCSI tape drives
|
|
QIC-02 and QIC-36 format (Archive- and Wangtek-
|
|
compatible) tape drives [*] [+]
|
|
CD-ROM drives:
|
|
Non-IDE Mitsumi CD-ROM drives [*] [+]
|
|
[Note: The Mitsumi driver device probe is known
|
|
to cause trouble with several devices!]
|
|
Most SCSI CD-ROM drives
|
|
Most ATAPI CD-ROM drives.
|
|
[ Note: Some low-priced IDE CDROM drives are known
|
|
for being not or not fully ATAPI compliant, and thus
|
|
requires some hack (generally an entry to a quirk
|
|
table) to work with NetBSD.]
|
|
Mice:
|
|
"Logitech"-style bus mice [*] [+]
|
|
"Microsoft"-style bus mice [*] [+]
|
|
"PS/2"-style mice [*] [+]
|
|
Serial mice (no kernel support necessary)
|
|
Sound Cards:
|
|
SoundBlaster, SoundBlaster Pro, SoundBlaster 16 [*] [+]
|
|
Gravis Ultrasound and Ultrasound Max [*] [+]
|
|
[The following drivers are not extensively tested]
|
|
Personal Sound System [*] [+]
|
|
Windows Sound System [*] [+]
|
|
ProAudio Spectrum [*] [+]
|
|
Gravis Ultrasound Plug&Play [*] [+]
|
|
Game Ports (Joysticks). [*] [+]
|
|
Miscellaneous:
|
|
Advanced power management (APM) [*]
|
|
|
|
Drivers for hardware marked with "[*]" are NOT present in kernels on the
|
|
distribution floppies. Except as noted above, all drivers are present
|
|
on all disks. Also, at the present time, the distributed kernels
|
|
support only one SCSI host adapter per machine. NetBSD normally
|
|
allows more, though, so if you have more than one, you can use all of
|
|
them by compiling a custom kernel once NetBSD is installed.
|
|
|
|
Support for devices marked with "[+]" IS included in the "generic" kernels,
|
|
although it is not in the kernels which are on the distribution floppies.
|
|
|
|
Support for devices marked with "[b]" requires BIOS support for PCI-PCI
|
|
bridging on your motherboard. Most reasonably modern Pentium motherboards
|
|
have this support, or can acquire it via a BIOS upgrade.
|
|
|
|
Hardware the we do NOT currently support, but get many questions
|
|
about:
|
|
AMD PCscsi SCSI host adapters (though the PCnet portion of the
|
|
PCnet-SCSI works fine)
|
|
Multiprocessor Pentium and Pentium Pro systems. (Though they should
|
|
run fine using one processor only.)
|
|
NCR 5380-based SCSI host adapters.
|
|
PCI WD-7000 SCSI host adapters.
|
|
QIC-40 and QIC-80 tape drives. (Those are the tape drives
|
|
that connect to the floppy disk controller.)
|
|
|
|
We are planning future support for many of these devices.
|
|
|
|
To be detected by the distributed kernels, the devices must
|
|
be configured as follows:
|
|
|
|
Device Name Port IRQ DRQ Misc
|
|
------ ---- ---- --- --- ----
|
|
Serial ports com0 0x3f8 4 [8250/16450/16550/clones]
|
|
com1 0x2f8 3 [8250/16450/16550/clones]
|
|
com2 0x3e8 5 [8250/16450/16550/clones]
|
|
|
|
Parallel ports lpt0 0x378 7 [interrupt-driven or polling]
|
|
lpt1 0x278 [polling only]
|
|
lpt2 0x3bc [polling only]
|
|
|
|
Floppy controller
|
|
fdc0 0x3f0 6 2 [supports two disks]
|
|
|
|
AHA-154x, AHA-174x (in compatibility mode), or BT-54x SCSI host adapters
|
|
aha0 0x330 any any
|
|
aha1 0x334 any any
|
|
|
|
AHA-174x SCSI host adapters (in enhanced mode)
|
|
ahb0 any any any
|
|
|
|
AHA-152x, AIC-6260- or AIC-6360-based SCSI host adapters
|
|
aic0 0x340 11 6
|
|
|
|
AHA-2X4X or AIC-7XXX-based SCSI host adapters
|
|
ahc0 any any any
|
|
|
|
BusLogic BT445, BT74x, or BT9xx SCSI host adapters
|
|
bha0 0x330 any any
|
|
bha1 0x334 any any
|
|
|
|
Symbios Logic/NCR 53C8xx based PCI SCSI host adapters
|
|
ncr0 any any any
|
|
|
|
Ultrastor 14f, 24f (if it works), or 34f SCSI host adapters
|
|
uha0 0x330 any any
|
|
uha1 0x340 any any
|
|
|
|
Western Digital WD7000 based ISA SCSI host adapters
|
|
wds0 0x350 15 6
|
|
wds1 0x358 11 5
|
|
|
|
MFM/ESDI/IDE/RLL hard disk controllers
|
|
wdc0 0x1f0 14 [supports two devices]
|
|
wdc1 0x170 15 [supports two devices]
|
|
|
|
ATA disks wd0, wd1, ...
|
|
SCSI disks sd0, sd1, ...
|
|
SCSI tapes st0, st1, ...
|
|
SCSI and ATAPI CD-ROMs cd0, cd1, ...
|
|
For each SCSI and IDE controller found, the SCSI or ATA(PI) devices
|
|
present on the bus are probed in increasing id order for SCSI and
|
|
master/slave order for ATA(PI). So the first SCSI drive found will
|
|
be called sd0, the second sd1, and so on ...
|
|
|
|
3Com 3c503 Ethernet cards
|
|
ec0 0x250 9 iomem 0xd8000
|
|
|
|
Novell NE1000, or NE2000 Ethernet boards
|
|
ne0 0x280 9
|
|
ne1 0x300 10
|
|
|
|
SMC/WD 8003, 8013, Elite16, and Elite16 Ultra Ethernet boards
|
|
we0 0x280 9 iomem 0xd0000
|
|
we1 0x300 10 iomem 0xcc000
|
|
|
|
3COM 3c509 or 3COM 3c579 Ethernet boards
|
|
ep0 any any
|
|
|
|
3COM 3x59X or 3COM 3x90X PCI Ethernet boards
|
|
ep0 any any [you must assign an interrupt in your
|
|
PCI BIOS, or let it do so for you]
|
|
|
|
AT&T StarLAN 10, EN100, or StarLAN Fiber, 3COM 3c507 or Intel
|
|
EtherExpress 16 Ethernet boards
|
|
ie0 0x360 7 iomem 0xd0000
|
|
ie1 0x300 10 iomem 0xd0000
|
|
|
|
Intel EtherExpress PRO 10 ISA
|
|
iy0 0x360 any
|
|
|
|
Intel EtherExpress 100 Fast Ethernet adapters
|
|
fxp0 any any [you must assign an interrupt in your
|
|
PCI BIOS, or let it do so for you]
|
|
|
|
SMC91C9x based Ethernet cards
|
|
sm0 0x300 10
|
|
|
|
PCnet-PCI based Ethernet boards; see above for partial list
|
|
le0 any any [you must assign an interrupt in your
|
|
PCI BIOS, or let it do so for you]
|
|
|
|
DC21x4x based Ethernet boards; see above for partial list
|
|
de0 any any [you must assign an interrupt in your
|
|
PCI BIOS, or let it do so for you]
|
|
|
|
Digital EtherWORKS III (DE203/DE204/DE205)
|
|
lc0 any any
|