NetBSD/sys/arch/sh3/include/scifreg.h
1999-09-16 21:15:36 +00:00

143 lines
5.7 KiB
C

/* $NetBSD: scifreg.h,v 1.2 1999/09/16 21:15:36 msaitoh Exp $ */
/*-
* Copyright (C) 1999 SAITOH Masanobu. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SH3_SCIFREG_H_
#define _SH3_SCIFREG_H_
/*
* Serial Communication Interface (SCIF)
*/
#if !defined(SH4)
/* SH3 definitions */
#define SHREG_SCSMR2 (*(volatile unsigned char *) 0xa4000150)
#define SHREG_SCBRR2 (*(volatile unsigned char *) 0xa4000152)
#define SHREG_SCSCR2 (*(volatile unsigned char *) 0xa4000154)
#define SHREG_SCFTDR2 (*(volatile unsigned char *) 0xa4000156)
#define SHREG_SCSSR2 (*(volatile unsigned short *) 0xa4000158)
#define SHREG_SCFRDR2 (*(volatile unsigned char *) 0xa400015A)
#define SHREG_SCFCR2 (*(volatile unsigned char *) 0xa400015C)
#define SHREG_SCFDR2 (*(volatile unsigned short *) 0xa400015E)
#define SCSCR2_TIE 0x80 /* Transmit Interrupt Enable */
#define SCSCR2_RIE 0x40 /* Recieve Interrupt Enable */
#define SCSCR2_TE 0x20 /* Transmit Enable */
#define SCSCR2_RE 0x10 /* Receive Enable */
#define SCSCR2_CKE1 0x02 /* ClocK Enable 1 */
#define SCSCR2_CKE0 0x01 /* ClocK Enable 0 */
#define SCSSR2_ER 0x0080 /* ERror */
#define SCSSR2_TEND 0x0040 /* Transmit END */
#define SCSSR2_TDFE 0x0020 /* Transmit Data Fifo Empty */
#define SCSSR2_BRK 0x0010 /* BReaK detection */
#define SCSSR2_FER 0x0008 /* Framing ERror */
#define SCSSR2_PER 0x0004 /* Parity ERror */
#define SCSSR2_RDF 0x0002 /* Recieve fifo Data Full */
#define SCSSR2_DR 0x0001 /* Data Ready */
#define SCFCR2_RTRG1 0x80 /* Receive TRiGger 1 */
#define SCFCR2_RTRG0 0x40 /* Receive TRiGger 0 */
#define SCFCR2_TTRG1 0x20 /* Transmit TRiGger 1 */
#define SCFCR2_TTRG0 0x10 /* Transmit TRiGger 0 */
#define SCFCR2_MCE 0x08 /* Modem Control Enable */
#define SCFCR2_TFRST 0x04 /* Transmit Fifo register ReSeT */
#define SCFCR2_RFRST 0x02 /* Receive Fifo register ReSeT */
#define SCFCR2_LOOP 0x01 /* LOOP back test */
#define FIFO_RCV_TRIGGER_1 0x00
#define FIFO_RCV_TRIGGER_4 0x40
#define FIFO_RCV_TRIGGER_8 0x80
#define FIFO_RCV_TRIGGER_14 0xc0
#define FIFO_XMT_TRIGGER_8 0x00
#define FIFO_XMT_TRIGGER_4 0x10
#define FIFO_XMT_TRIGGER_2 0x20
#define FIFO_XMT_TRIGGER_1 0x30
#else
/* SH4 definitions */
#define SHREG_SCSMR2 (*(volatile unsigned short *) 0xffe80000)
#define SHREG_SCBRR2 (*(volatile unsigned char *) 0xffe80004)
#define SHREG_SCSCR2 (*(volatile unsigned short *) 0xffe80008)
#define SHREG_SCFTDR2 (*(volatile unsigned char *) 0xffe8000c)
#define SHREG_SCFSR2 (*(volatile unsigned short *) 0xffe80010)
#define SHREG_SCFRDR2 (*(volatile unsigned char *) 0xffe80014)
#define SHREG_SCFCR2 (*(volatile unsigned short *) 0xffe80018)
#define SHREG_SCFDR2 (*(volatile unsigned short *) 0xffe8001c)
#define SHREG_SCSPTR2 (*(volatile unsigned short *) 0xffe80020)
#define SHREG_SCLSR2 (*(volatile unsigned short *) 0xffe80024)
/* alias */
#define SHREG_SCSFDR2 SHREG_SCFTDR2
#define SHREG_SCSSR2 SHREG_SCFSR2
#define SCSCR2_TIE 0x0080 /* Transmit Interrupt Enable */
#define SCSCR2_RIE 0x0040 /* Recieve Interrupt Enable */
#define SCSCR2_TE 0x0020 /* Transmit Enable */
#define SCSCR2_RE 0x0010 /* Receive Enable */
#define SCSCR2_CKE1 0x0002 /* ClocK Enable 1 */
#define SCSSR2_ER 0x0080 /* ERror */
#define SCSSR2_TEND 0x0040 /* Transmit END */
#define SCSSR2_TDFE 0x0020 /* Transmit Data Fifo Empty */
#define SCSSR2_BRK 0x0010 /* BReaK detection */
#define SCSSR2_FER 0x0008 /* Framing ERror */
#define SCSSR2_PER 0x0004 /* Parity ERror */
#define SCSSR2_RDF 0x0002 /* Recieve fifo Data Full */
#define SCSSR2_DR 0x0001 /* Data Ready */
#define SCFCR2_RTRG1 0x0080 /* Receive TRiGger 1 */
#define SCFCR2_RTRG0 0x0040 /* Receive TRiGger 0 */
#define SCFCR2_TTRG1 0x0020 /* Transmit TRiGger 1 */
#define SCFCR2_TTRG0 0x0010 /* Transmit TRiGger 0 */
#define SCFCR2_MCE 0x0008 /* Modem Control Enable */
#define SCFCR2_TFRST 0x0004 /* Transmit Fifo register ReSeT */
#define SCFCR2_RFRST 0x0002 /* Receive Fifo register ReSeT */
#define SCFCR2_LOOP 0x0001 /* LOOP back test */
#define FIFO_RCV_TRIGGER_1 0x0000
#define FIFO_RCV_TRIGGER_4 0x0040
#define FIFO_RCV_TRIGGER_8 0x0080
#define FIFO_RCV_TRIGGER_14 0x00c0
#define FIFO_XMT_TRIGGER_8 0x0000
#define FIFO_XMT_TRIGGER_4 0x0010
#define FIFO_XMT_TRIGGER_2 0x0020
#define FIFO_XMT_TRIGGER_1 0x0030
#endif
/* common definitions */
#define SCFDR2_TXCNT 0xff00 /* Tx CouNT */
#define SCFDR2_RECVCNT 0x00ff /* Rx CouNT */
#define SCFDR2_TXF_FULL 0x1000 /* Tx FULL */
#define SCFDR2_RXF_EPTY 0x0000 /* Rx EMPTY */
#endif /* !_SH3_SCIFREG_ */