106 lines
4.9 KiB
Plaintext
106 lines
4.9 KiB
Plaintext
$NetBSD: xfer,v 1.3 1998/01/09 18:45:40 perry Exp $
|
|
|
|
Installation is supported from several media types, including:
|
|
|
|
FTP
|
|
Remote NFS partition
|
|
CD-ROM
|
|
|
|
No matter which installation medium you choose, you'll need to have
|
|
either a 1.44 MB floppy disk (if your Alpha has a floppy drive to
|
|
boot from) or you'll have to set up a server with BOOTP, TFTP and
|
|
NFS to boot from as described later in this document.
|
|
|
|
If you are using a UN*X-like system to write the floppy images to
|
|
disks, you should use the "dd" command to copy the file system image
|
|
(.fs file) directly to the raw floppy disk. It is suggested that you
|
|
read the dd(1) manual page or ask your system administrator to
|
|
determine the correct set of arguments to use; it will be slightly
|
|
different from system to system, and a comprehensive list of the
|
|
possibilities is beyond the scope of this document.
|
|
|
|
If you are using DOS to write the floppy image to disk, you should
|
|
use the "rawrite" utility, provided in the "i386/utilities" directory
|
|
of the NetBSD distribution. It will write the file system image (.fs
|
|
file) to disks.
|
|
|
|
Note that, when installing or upgrading, the floppy can be
|
|
write-protected if you wish. These systems mount ramdisks as their
|
|
root file systems once booted, and will not need to write to the
|
|
floppy itself at any time -- indeed, once booted, the floppy may be
|
|
removed from the disk drive.
|
|
|
|
Obviously, the steps necessary to prepare the distribution sets
|
|
for installation depend on which installation medium you choose.
|
|
The steps for the various media are outlined below.
|
|
|
|
To install NetBSD using NFS to get the installation sets, you must
|
|
do the following:
|
|
|
|
Place the NetBSD distribution sets you wish to install into a
|
|
directory on an NFS server, and make that directory mountable
|
|
by the machine on which you are installing or upgrading NetBSD.
|
|
This will probably require modifying the /etc/exports file on
|
|
of the NFS server and resetting its mount daemon (mountd).
|
|
(Both of these actions will probably require superuser
|
|
privileges on the server.)
|
|
|
|
You need to know the the numeric IP address of the NFS server,
|
|
and, if the server is not on a network directly connected to
|
|
the machine on which you're installing or upgrading NetBSD,
|
|
you need to know the numeric IP address of the router closest
|
|
to the NetBSD machine. Finally, you need to know the numeric
|
|
IP address of the NetBSD machine itself. The install
|
|
program will ask you to provide this information to be able
|
|
to access the sets.
|
|
|
|
Once the NFS server is set up properly and you have the
|
|
information mentioned above, you can start the actual
|
|
installation process.
|
|
|
|
To install NetBSD by using FTP to get the installation sets, you
|
|
must do the following:
|
|
|
|
The preparations for this installation method are easy;
|
|
all you make sure that there's some FTP site from which
|
|
you can retrieve the NetBSD distribution when you're about
|
|
to install. You need to know the numeric IP address of that
|
|
site, and, if it's not on a network directly connected to
|
|
the machine on which you're installing or upgrading NetBSD,
|
|
you need to know the numeric IP address of the router
|
|
closest to the NetBSD machine. Finally, you need to know
|
|
the numeric IP address of the NetBSD machine itself. The
|
|
install program will ask you to provide this information
|
|
to be able to access the sets via ftp.
|
|
|
|
Once you have this information, you can proceed to the actual
|
|
installation.
|
|
|
|
To install NetBSD by using a CD-ROM to get the installation sets,
|
|
you must do the following:
|
|
|
|
Have a CD-ROM with the installation sets on it, and a CD-ROM
|
|
drive on your machine.
|
|
|
|
If you are upgrading NetBSD, you also have the option of installing
|
|
NetBSD by putting the new distribution sets somewhere in your existing
|
|
file system, and using them from there. To do that, you must do the
|
|
following:
|
|
|
|
Place the distribution sets you wish to upgrade somewhere in
|
|
your current file system tree. Please note that the /dev on
|
|
the floppy used for upgrades only knows about wd0, wd1, sd0,
|
|
sd1 and sd2. If you have more than two IDE drives or more than
|
|
three SCSI drives, you should take care not to place the sets
|
|
on the high numbered drives.
|
|
|
|
At a bare minimum, you must upgrade the "base" and "kern"
|
|
binary distribution, and so must put the "base" and
|
|
"kern" sets somewhere in your file system. If you wish,
|
|
you can do the other sets, as well, but you should NOT upgrade
|
|
the "etc" distribution; the "etc" distribution contains system
|
|
configuration files that you should review and update by hand.
|
|
|
|
Once you have done this, you can proceed to the next step in
|
|
the upgrade process, actually upgrading your system.
|