NetBSD/sys/dev/scsipi/scsi_all.h

181 lines
3.8 KiB
C

/* $NetBSD: scsi_all.h,v 1.12 1997/10/01 01:18:54 enami Exp $ */
/*
* SCSI-specific insterface description.
*/
/*
* Largely written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*/
#ifndef _SCSI_SCSI_ALL_H
#define _SCSI_SCSI_ALL_H 1
/*
* SCSI command format
*/
/*
* Define dome bits that are in ALL (or a lot of) scsi commands
*/
#define SCSI_CTL_LINK 0x01
#define SCSI_CTL_FLAG 0x02
#define SCSI_CTL_VENDOR 0xC0
/*
* Some old SCSI devices need the LUN to be set in the top 3 bits of the
* second byte of the CDB.
*/
#define SCSI_CMD_LUN_MASK 0xe0
#define SCSI_CMD_LUN_SHIFT 5
/*
* XXX
* Actually some SCSI driver expects this structure to be 12 bytes, so
* don't change it unless you really know what you are doing
*/
struct scsi_generic {
u_int8_t opcode;
u_int8_t bytes[11];
};
/* XXX Is this a command ? What's its opcode ? */
struct scsi_send_diag {
u_int8_t opcode;
u_int8_t byte2;
#define SSD_UOL 0x01
#define SSD_DOL 0x02
#define SSD_SELFTEST 0x04
#define SSD_PF 0x10
u_int8_t unused[1];
u_int8_t paramlen[2];
u_int8_t control;
};
#define SCSI_MODE_SENSE 0x1a
struct scsi_mode_sense {
u_int8_t opcode;
u_int8_t byte2;
#define SMS_DBD 0x08
u_int8_t page;
#define SMS_PAGE_CODE 0x3F
#define SMS_PAGE_CTRL 0xC0
#define SMS_PAGE_CTRL_CURRENT 0x00
#define SMS_PAGE_CTRL_CHANGEABLE 0x40
#define SMS_PAGE_CTRL_DEFAULT 0x80
#define SMS_PAGE_CTRL_SAVED 0xC0
u_int8_t unused;
u_int8_t length;
u_int8_t control;
};
#define SCSI_MODE_SENSE_BIG 0x54
struct scsi_mode_sense_big {
u_int8_t opcode;
u_int8_t byte2; /* same bits as small version */
u_int8_t page; /* same bits as small version */
u_int8_t unused[4];
u_int8_t length[2];
u_int8_t control;
};
#define SCSI_MODE_SELECT 0x15
struct scsi_mode_select {
u_int8_t opcode;
u_int8_t byte2;
#define SMS_SP 0x01
#define SMS_PF 0x10
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
#define SCSI_MODE_SELECT_BIG 0x55
struct scsi_mode_select_big {
u_int8_t opcode;
u_int8_t byte2; /* same bits as small version */
u_int8_t unused[5];
u_int8_t length[2];
u_int8_t control;
};
#define SCSI_RESERVE 0x16
struct scsi_reserve {
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
#define SCSI_RELEASE 0x17
struct scsi_release {
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
#define SCSI_CHANGE_DEFINITION 0x40
struct scsi_changedef {
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused1;
u_int8_t how;
u_int8_t unused[4];
u_int8_t datalen;
u_int8_t control;
};
#define SC_SCSI_1 0x01
#define SC_SCSI_2 0x03
struct scsi_blk_desc {
u_int8_t density;
u_int8_t nblocks[3];
u_int8_t reserved;
u_int8_t blklen[3];
};
struct scsi_mode_header {
u_int8_t data_length; /* Sense data length */
u_int8_t medium_type;
u_int8_t dev_spec;
u_int8_t blk_desc_len;
};
struct scsi_mode_header_big {
u_int8_t data_length[2]; /* Sense data length */
u_int8_t medium_type;
u_int8_t dev_spec;
u_int8_t unused[2];
u_int8_t blk_desc_len[2];
};
/*
* Status Byte
*/
#define SCSI_OK 0x00
#define SCSI_CHECK 0x02
#define SCSI_BUSY 0x08
#define SCSI_INTERM 0x10
#define SCSI_QUEUE_FULL 0x28
#endif /* _SCSI_SCSI_ALL_H */