137 lines
4.5 KiB
Plaintext
137 lines
4.5 KiB
Plaintext
.\" $NetBSD: hardware,v 1.33 1999/06/28 21:28:37 is Exp $
|
|
.
|
|
.Nx \*V
|
|
runs on any Amiga that has a 68020 or better CPU with
|
|
some form of MMU, and on 68060 DraCos.
|
|
.Pp
|
|
For 68020 and 68030 systems, a FPU is recommended but not required for the
|
|
system utilities.
|
|
68LC040, 68040V and 68LC060 systems don't work correctly at the moment.
|
|
.Pp
|
|
The minimal configuration requires 6M of RAM (not including CHIPMEM!)
|
|
and about 75M of disk space. To install the entire system requires
|
|
much more disk space, and to run X or compile the system, more RAM
|
|
is recommended. (6M of RAM will actually allow you to compile,
|
|
however it won't be speedy. X really isn't usable on a 6M system.)
|
|
.Pp
|
|
Here is a table of recommended HD partition sizes for a full install:
|
|
.
|
|
.Bd -literal -offset indent
|
|
partition: advise, with X, needed, with X
|
|
root (/) 20M 20M 15M 15M
|
|
user (/usr) 110M 135M 90M 115M
|
|
swap ----- 2M for every M ram -----
|
|
local (/usr/local) up to you
|
|
.Ed
|
|
.
|
|
.Pp
|
|
As you may note the recommended size of /usr is 20M greater than
|
|
needed. This is to leave room for a kernel source and compile tree as
|
|
you will probably want to compile your own kernel. GENERIC is large
|
|
and bulky to accommodate all people. For example, most peoples machines
|
|
have an FPU, so you do not need the bulky FPU_EMULATE option.
|
|
.Pp
|
|
Preconfigured or precompiled packages are installed below /usr/pkg per
|
|
default. You should either make /usr larger (if you intend to install
|
|
a lot of them), make /usr/pkg an additional partiton, use the -p option
|
|
to pkg_add to install them in a different place or link /usr/pkg to
|
|
some different place.
|
|
.Pp
|
|
If you only have less than 8M of fast memory, you should make your swap
|
|
partition larger, as your system will be doing much more swapping. Especially:
|
|
do NOT place it onto a old small (and normally slow) disk!
|
|
.Pp
|
|
Supported devices include:
|
|
.Bd -literal -offset indent
|
|
A4000/A1200 IDE controller, including ATAPI devices.
|
|
SCSI host adapters:
|
|
33c93 based boards: A2091, A3000 builtin, A3000 builtin
|
|
modified for Apollo accellerator board, and GVP series II.
|
|
53c80 based boards: 12 Gauge, IVS, Wordsync/Bytesync and
|
|
Emplant.*)
|
|
53c710 based boards: A4091, Magnum, Warp Engine, Zeus
|
|
and DraCo builtin.
|
|
FAS216 based SCSI boards: FastLane Z3, Blizzard I and II,
|
|
Blizzard IV, Blizzard 2060, CyberSCSI Mk I and II.
|
|
53c770 based SCSI baords: Cyberstorm Mk III SCSI, Cyberstorm
|
|
PPC SCSI.
|
|
Video controllers:
|
|
ECS, AGA and A2024 built in on various Amigas.
|
|
Retina Z2*****, Retina Z3 and Altais.
|
|
Cirrus CL GD 54xx based boards:
|
|
GVP Spectrum,
|
|
Picasso II, II+ and IV,
|
|
Piccolo and Piccolo SD64.
|
|
Tseng ET4000 based boards:
|
|
Domino and Domino16M proto,
|
|
oMniBus,
|
|
Merlin.
|
|
A2410*****.
|
|
Cybervision 64.
|
|
Cybervision 64/3D.
|
|
|
|
Audio I/O:
|
|
Amiga builtin
|
|
Melody Mpeg-audio layer 2 board
|
|
|
|
Ethernet controllers:
|
|
A2065 Ethernet
|
|
Hydra Ethernet
|
|
ASDG Ethernet
|
|
A4066 Ethernet
|
|
Ariadne Ethernet
|
|
Ariadne II Ethernet
|
|
Quicknet Ethernet
|
|
ARCnet controllers:
|
|
A2060 ARCnet
|
|
Tape drives:
|
|
Most SCSI tape drives, including
|
|
Archive Viper, Cipher SCSI-2 ST150.
|
|
Scanners:
|
|
SCSI-2 scanners behaving as SCSI-2 scanner devices,
|
|
HP Scanjet II, Mustek SCSI scanner.***)
|
|
CD-ROM drives:
|
|
Most SCSI CD-ROM drives
|
|
Serial cards:
|
|
HyperCom 3Z, HyperCom 4, HyperCom 3+ and 4+
|
|
MultiFaceCard II and III
|
|
A2232 (normal and clockdoubled)
|
|
Amiga floppy drives with Amiga (880/1760kB) and
|
|
IBM (720/1440kB) encoding. ****)
|
|
Amiga parallel port.
|
|
Amiga serial port.
|
|
Amiga mouse.
|
|
DraCo serial port, including serial mouse.
|
|
DraCo parallel printer port.
|
|
Real-time clocks:
|
|
A2000, A3000, A4000 builtin (r/w),
|
|
DraCo builtin (r/o).
|
|
.Ed
|
|
.Pp
|
|
If its not on the above lists, there is no support for it in this
|
|
release. Especially (but this is an incomplete list), there are no
|
|
drivers for: Blizzard III SCSI option,
|
|
Ferret SCSI, Oktagon SCSI.
|
|
.Pp
|
|
Footnotes: Known problems with some hardware:
|
|
.Bl -tag -width *****
|
|
.It *
|
|
the Emplant SCSI adapter has been reported by a party to
|
|
hang after doing part of the installation without problems.
|
|
.It **
|
|
SCSI scanner support is machine independent, so it should
|
|
work, but hasn't been tested yet on most Amiga configurations.
|
|
There are reports that the Mustek and HP Scanjet hang if
|
|
accessed from the A3000. This might apply to other
|
|
33C93-Adapters, too.
|
|
.It ****
|
|
Our floppy driver doesn't notice when mounted floppies are
|
|
write-protected at the moment. Your floppy will stay
|
|
unchanged, but you might not notice that you didn't write
|
|
anything due to the buffer cache. Also note that HD floppy
|
|
drives only get detected as such if a HD floppy is inserted at
|
|
boot time.
|
|
.It *****
|
|
No X11 server available.
|
|
.El
|