NetBSD/sys/dev/pci/if_re_pci.c

290 lines
8.3 KiB
C

/* $NetBSD: if_re_pci.c,v 1.38 2009/09/02 15:11:13 tsutsui Exp $ */
/*
* Copyright (c) 1997, 1998-2003
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/re/if_re.c,v 1.20 2004/04/11 20:34:08 ru Exp $ */
/*
* RealTek 8139C+/8169/8169S/8110S PCI NIC driver
*
* Written by Bill Paul <wpaul@windriver.com>
* Senior Networking Software Engineer
* Wind River Systems
*
* NetBSD bus-specific frontends for written by
* Jonathan Stone <jonathan@netbsd.org>
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_re_pci.c,v 1.38 2009/09/02 15:11:13 tsutsui Exp $");
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <sys/bus.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/rtl81x9reg.h>
#include <dev/ic/rtl81x9var.h>
#include <dev/ic/rtl8169var.h>
struct re_pci_softc {
struct rtk_softc sc_rtk;
void *sc_ih;
pci_chipset_tag_t sc_pc;
pcitag_t sc_pcitag;
};
static int re_pci_match(device_t, cfdata_t, void *);
static void re_pci_attach(device_t, device_t, void *);
CFATTACH_DECL_NEW(re_pci, sizeof(struct re_pci_softc),
re_pci_match, re_pci_attach, NULL, NULL);
/*
* Various supported device vendors/types and their names.
*/
static const struct rtk_type re_devs[] = {
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8139,
RTK_8139CPLUS,
"RealTek 8139C+ 10/100BaseTX" },
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8101E,
RTK_8101E,
"RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX" },
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8168,
RTK_8168,
"RealTek 8168/8111 PCIe Gigabit Ethernet" },
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8169,
RTK_8169,
"RealTek 8169/8110 Gigabit Ethernet" },
{ PCI_VENDOR_REALTEK, PCI_PRODUCT_REALTEK_RT8169SC,
RTK_8169,
"RealTek 8169SC/8110SC Single-chip Gigabit Ethernet" },
{ PCI_VENDOR_COREGA, PCI_PRODUCT_COREGA_LAPCIGT,
RTK_8169,
"Corega CG-LAPCIGT Gigabit Ethernet" },
{ PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE528T,
RTK_8169,
"D-Link DGE-528T Gigabit Ethernet" },
{ PCI_VENDOR_USR2, PCI_PRODUCT_USR2_USR997902,
RTK_8169,
"US Robotics (3Com) USR997902 Gigabit Ethernet" },
{ PCI_VENDOR_LINKSYS, PCI_PRODUCT_LINKSYS_EG1032,
RTK_8169,
"Linksys EG1032 rev. 3 Gigabit Ethernet" },
{ 0, 0, 0, NULL }
};
#define RE_LINKSYS_EG1032_SUBID 0x00241737
/*
* Probe for a RealTek 8139C+/8169/8110 chip. Check the PCI vendor and device
* IDs against our list and return a device name if we find a match.
*/
static int
re_pci_match(device_t parent, cfdata_t cf, void *aux)
{
const struct rtk_type *t;
struct pci_attach_args *pa = aux;
pcireg_t subid;
subid = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG);
/* special-case Linksys EG1032, since rev 2 uses sk(4) */
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_LINKSYS &&
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_LINKSYS_EG1032) {
if (subid != RE_LINKSYS_EG1032_SUBID)
return 0;
}
/* Don't match 8139 other than C-PLUS */
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_REALTEK &&
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_REALTEK_RT8139) {
if (PCI_REVISION(pa->pa_class) != 0x20)
return 0;
}
t = re_devs;
while (t->rtk_name != NULL) {
if ((PCI_VENDOR(pa->pa_id) == t->rtk_vid) &&
(PCI_PRODUCT(pa->pa_id) == t->rtk_did)) {
return 2; /* defect rtk(4) */
}
t++;
}
return 0;
}
static void
re_pci_attach(device_t parent, device_t self, void *aux)
{
struct re_pci_softc *psc = device_private(self);
struct rtk_softc *sc = &psc->sc_rtk;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
const char *intrstr = NULL;
const struct rtk_type *t;
uint32_t hwrev;
int error = 0;
pcireg_t command, memtype;
bool ioh_valid, memh_valid;
bus_space_tag_t iot, memt;
bus_space_handle_t ioh, memh;
bus_size_t iosize, memsize, bsize;
sc->sc_dev = self;
/*
* Map control/status registers.
*/
command = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
command |= PCI_COMMAND_MASTER_ENABLE;
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command);
ioh_valid = (pci_mapreg_map(pa, RTK_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, &iosize) == 0);
memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, RTK_PCI_LOMEM);
switch (memtype) {
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT:
case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT:
memh_valid = (pci_mapreg_map(pa, RTK_PCI_LOMEM,
memtype, 0, &memt, &memh, NULL, &memsize) == 0);
break;
default:
memh_valid = 0;
break;
}
if (ioh_valid) {
sc->rtk_btag = iot;
sc->rtk_bhandle = ioh;
bsize = iosize;
} else if (memh_valid) {
sc->rtk_btag = memt;
sc->rtk_bhandle = memh;
bsize = memsize;
} else {
aprint_error(": can't map registers\n");
return;
}
t = re_devs;
hwrev = CSR_READ_4(sc, RTK_TXCFG) & RTK_TXCFG_HWREV;
while (t->rtk_name != NULL) {
if ((PCI_VENDOR(pa->pa_id) == t->rtk_vid) &&
(PCI_PRODUCT(pa->pa_id) == t->rtk_did)) {
break;
}
t++;
}
aprint_normal(": %s (rev. 0x%02x)\n",
t->rtk_name, PCI_REVISION(pa->pa_class));
if (t->rtk_basetype == RTK_8139CPLUS)
sc->sc_quirk |= RTKQ_8139CPLUS;
if (t->rtk_basetype == RTK_8168 ||
t->rtk_basetype == RTK_8101E)
sc->sc_quirk |= RTKQ_PCIE;
sc->sc_dmat = pa->pa_dmat;
/*
* No power/enable/disable machinery for PCI attach;
* mark the card enabled now.
*/
sc->sc_flags |= RTK_ENABLED;
/* Hook interrupt last to avoid having to lock softc */
/* Allocate interrupt */
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih);
psc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, re_intr, sc);
if (psc->sc_ih == NULL) {
aprint_error_dev(self, "couldn't establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
return;
}
aprint_normal_dev(self, "interrupting at %s\n", intrstr);
re_attach(sc);
/*
* Perform hardware diagnostic on the original RTL8169.
* Some 32-bit cards were incorrectly wired and would
* malfunction if plugged into a 64-bit slot.
*/
if (hwrev == RTK_HWREV_8169) {
error = re_diag(sc);
if (error) {
aprint_error_dev(self,
"attach aborted due to hardware diag failure\n");
re_detach(sc);
if (psc->sc_ih != NULL) {
pci_intr_disestablish(pc, psc->sc_ih);
psc->sc_ih = NULL;
}
if (ioh_valid)
bus_space_unmap(iot, ioh, iosize);
if (memh_valid)
bus_space_unmap(memt, memh, memsize);
}
}
}