NetBSD/gnu/dist/grep/PATCHES-AC

244 lines
8.6 KiB
Plaintext

--------------------------------------------------------------------
> François Pinard mailto:pinard@iro.umontreal.ca
> I have a collection of DOS-abling patches for Autoconf which came from
> Eli, I think, and which you may fetch from:
>
> http://www.iro.umontreal.ca/contrib/paxutils/dist/PATCHES-AC
>
> if I'm not mistaken. There are a few other mods not related to DOS ports.
--------------------------------------------------------------------
> On Sun, 22 Nov 1998, Tim Rice(tim@trr.metro.net wrote:
> Here is a patch for Autoconf version 2.12 to address a couple of
> issues on SVR4.2 machines.
>
> It was failing the test for opendir() because opendir() is in libc
> not in libdir. The patch now checks libc first then libdir.
>
> It was failing on gethostbyname(). I added a third test for gethostbynane()
> in libsocket.
>
--------------------------------------------------------------------
1999-01-27
* acgeneral.m4: added support for DJGPP
- "test -f" should be replaced by "test -x" where the script
looks for an executable binary which will be called gcc.exe
etc. on DOS/Windows. A simple test for $COMSPEC being not
defined is suggested as a means to determine which option is
required. (You cannot use "test -x" on all systems because some
variants of Unix shell don't support -x.)
- File patterns used to distinguish between absolute and relative
file names need to be changed as follows:
/*) --> /*|[A-z]:/*)
[/$]* --> [/$]*/[A-z]:/*)
This is because absolute file names on DOS/Windows may include a
drive letter and a colon before the leading slash. Note that the
lower-case `z' in [A-z] is intentional, since some network
clients allow filesystems to be identified by the six letters
between the uppercase `Z' and lowercase `a', and because the
drive letter can come in either letter-case.
- The line which computes ac_file_inputs by replacing the colon in
foo:foo.in needs its two Sed commands to be swapped, because
once you put in the $ac_given_srcdir part, the colon after the
drive letter in it will be replaced instead of the original
colon.
From Eli Zarestskii.
* acspecific.m4: check opendir in libc before -ldir
gethosbyname/connect check in -lsocket also
From Tim Rice.
diff -ur ../autoconf-2.13.orig/acgeneral.m4 ./acgeneral.m4
--- ../autoconf-2.13.orig/acgeneral.m4 Tue Jan 5 08:27:37 1999
+++ ./acgeneral.m4 Tue Feb 9 22:27:34 1999
@@ -636,6 +636,9 @@
esac
done
+# Support of DJGPP port of bash.
+if test -n "$COMSPEC$ComSpec"; then ac_x=-x; else ac_x=-f; fi
+
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
@@ -1213,7 +1216,7 @@
dnl AC_MSG_WARN(PROBLEM-DESCRIPTION)
define(AC_MSG_WARN,
-[echo "configure: warning: $1" 1>&2])
+[echo "configure: WARNING: $1" 1>&2])
dnl AC_MSG_ERROR(ERROR-DESCRIPTION)
define(AC_MSG_ERROR,
@@ -1304,7 +1307,7 @@
dnl AC_OBSOLETE(THIS-MACRO-NAME [, SUGGESTION])
define(AC_OBSOLETE,
-[errprint(__file__:__line__: warning: [$1] is obsolete[$2]
+[errprint(__file__:__line__: WARNING: [$1] is obsolete[$2]
)])
@@ -1330,7 +1333,7 @@
ac_dummy="ifelse([$5], , $PATH, [$5])"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
+ if test $ac_x $ac_dir/$ac_word; then
ifelse([$6], , , dnl
[ if test "[$ac_dir/$ac_word]" = "$6"; then
ac_prog_rejected=yes
@@ -1384,7 +1387,9 @@
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
- /*)
+changequote(, )dnl
+ /*|[A-z]:/*)
+changequote([, ])dnl
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
?:/*)
@@ -1398,7 +1403,7 @@
ac_dummy="ifelse([$4], , $PATH, [$4])"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
+ if test $ac_x $ac_dir/$ac_word; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
@@ -1802,7 +1807,7 @@
AC_DEFUN(AC_TRY_RUN,
[if test "$cross_compiling" = yes; then
ifelse([$4], ,
- [errprint(__file__:__line__: warning: [AC_TRY_RUN] called without default to allow cross compiling
+ [errprint(__file__:__line__: WARNING: [AC_TRY_RUN] called without default to allow cross compiling
)dnl
AC_MSG_ERROR(can not run test program while cross compiling)],
[$4])
@@ -2267,7 +2272,10 @@
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+changequote(, )dnl
+ /*|[A-z]:/*)
+changequote([, ])dnl
+ srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
@@ -2276,7 +2284,7 @@
ifdef([AC_PROVIDE_AC_PROG_INSTALL],
[ case "$ac_given_INSTALL" in
changequote(, )dnl
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ [/$]*|[A-z]:/*) INSTALL="$ac_given_INSTALL" ;;
changequote([, ])dnl
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
@@ -2291,7 +2299,7 @@
*) ac_comsub= ;;
esac
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%:% $ac_given_srcdir/%g" -e "s%^%$ac_given_srcdir/%"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
@@ -2359,7 +2367,7 @@
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%:% $ac_given_srcdir/%g" -e "s%^%$ac_given_srcdir/%"`
cat $ac_file_inputs > conftest.in
EOF
@@ -2483,7 +2491,7 @@
case "$srcdir" in
changequote(, )dnl
- [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+ [/$]*|[A-z]:/*) ac_rel_source="$srcdir/$ac_source" ;;
changequote([, ])dnl
*) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
esac
@@ -2558,7 +2566,9 @@
case "$srcdir" in
.) # No --srcdir option. We are building in place.
ac_sub_srcdir=$srcdir ;;
- /*) # Absolute path.
+changequote(, )dnl
+ /*|[A-z]:/*) # Absolute path.
+changequote([, ])dnl
ac_sub_srcdir=$srcdir/$ac_config_dir ;;
*) # Relative path.
ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
@@ -2579,14 +2589,16 @@
# Make the cache file name correct relative to the subdirectory.
case "$cache_file" in
- /*) ac_sub_cache_file=$cache_file ;;
+changequote(, )dnl
+ /*|[A-z]:/*) ac_sub_cache_file=$cache_file ;;
+changequote([, ])dnl
*) # Relative path.
ac_sub_cache_file="$ac_dots$cache_file" ;;
esac
ifdef([AC_PROVIDE_AC_PROG_INSTALL],
[ case "$ac_given_INSTALL" in
changequote(, )dnl
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ [/$]*|[A-z]:/*) INSTALL="$ac_given_INSTALL" ;;
changequote([, ])dnl
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
diff -ur ../autoconf-2.13.orig/acspecific.m4 ./acspecific.m4
--- ../autoconf-2.13.orig/acspecific.m4 Tue Jan 5 08:27:52 1999
+++ ./acspecific.m4 Thu Jan 28 23:01:41 1999
@@ -615,7 +615,7 @@
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
+ if test $ac_x $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
@@ -765,7 +765,10 @@
[ac_header_dirent=$ac_hdr; break])
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
-AC_CHECK_LIB(dir, opendir, LIBS="$LIBS -ldir")
+AC_CHECK_FUNC(opendir)
+if test $ac_cv_func_opendir = no; then
+ AC_CHECK_LIB(dir, opendir, LIBS="$LIBS -ldir")
+fi
else
AC_CHECK_LIB(x, opendir, LIBS="$LIBS -lx")
fi
@@ -2564,6 +2567,9 @@
AC_CHECK_FUNC(gethostbyname)
if test $ac_cv_func_gethostbyname = no; then
AC_CHECK_LIB(nsl, gethostbyname, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl")
+ if test $ac_cv_func_gethostbyname = no; then
+ AC_CHECK_LIB(socket, gethostbyname, X_EXTRA_LIBS="$X_EXTRA_LIBS -lsocket -lnsl", , -lnsl)
+ fi
fi
# lieder@skyler.mavd.honeywell.com says without -lsocket,
@@ -2575,7 +2581,7 @@
# We assume that if connect needs -lnsl, so does gethostbyname.
AC_CHECK_FUNC(connect)
if test $ac_cv_func_connect = no; then
- AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", ,
+ AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket -lnsl $X_EXTRA_LIBS", ,
$X_EXTRA_LIBS)
fi