NetBSD/sys/arch/amiga/dev/flsc.c

683 lines
18 KiB
C

/* $NetBSD: flsc.c,v 1.25 1999/09/30 22:59:52 thorpej Exp $ */
/*
* Copyright (c) 1997 Michael L. Hitch
* Copyright (c) 1995 Daniel Widenfalk
* Copyright (c) 1994 Christian E. Hopps
* Copyright (c) 1982, 1990 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Daniel Widenfalk
* and Michael L. Hitch.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Initial amiga Fastlane driver by Daniel Widenfalk. Conversion to
* 53c9x MI driver by Michael L. Hitch (mhitch@montana.edu).
*/
#include "opt_ddb.h"
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/queue.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>
#include <machine/cpu.h>
#include <machine/param.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
#include <amiga/amiga/isr.h>
#include <amiga/dev/flscvar.h>
#include <amiga/dev/zbusvar.h>
void flscattach __P((struct device *, struct device *, void *));
int flscmatch __P((struct device *, struct cfdata *, void *));
/* Linkup to the rest of the kernel */
struct cfattach flsc_ca = {
sizeof(struct flsc_softc), flscmatch, flscattach
};
struct scsipi_device flsc_dev = {
NULL, /* Use default error handler */
NULL, /* have a queue, served by this */
NULL, /* have no async handler */
NULL, /* Use default 'done' routine */
};
/*
* Functions and the switch for the MI code.
*/
u_char flsc_read_reg __P((struct ncr53c9x_softc *, int));
void flsc_write_reg __P((struct ncr53c9x_softc *, int, u_char));
int flsc_dma_isintr __P((struct ncr53c9x_softc *));
void flsc_dma_reset __P((struct ncr53c9x_softc *));
int flsc_dma_intr __P((struct ncr53c9x_softc *));
int flsc_dma_setup __P((struct ncr53c9x_softc *, caddr_t *,
size_t *, int, size_t *));
void flsc_dma_go __P((struct ncr53c9x_softc *));
void flsc_dma_stop __P((struct ncr53c9x_softc *));
int flsc_dma_isactive __P((struct ncr53c9x_softc *));
void flsc_clear_latched_intr __P((struct ncr53c9x_softc *));
struct ncr53c9x_glue flsc_glue = {
flsc_read_reg,
flsc_write_reg,
flsc_dma_isintr,
flsc_dma_reset,
flsc_dma_intr,
flsc_dma_setup,
flsc_dma_go,
flsc_dma_stop,
flsc_dma_isactive,
flsc_clear_latched_intr,
};
/* Maximum DMA transfer length to reduce impact on high-speed serial input */
u_long flsc_max_dma = 1024;
extern int ser_open_speed;
extern int ncr53c9x_debug;
extern u_long scsi_nosync;
extern int shift_nosync;
/*
* if we are an Advanced Systems & Software FastlaneZ3
*/
int
flscmatch(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct zbus_args *zap;
if (!is_a4000() && !is_a3000())
return(0);
zap = aux;
if (zap->manid == 0x2140 && zap->prodid == 11
&& iszthreepa(zap->pa))
return(1);
return(0);
}
/*
* Attach this instance, and then all the sub-devices
*/
void
flscattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct flsc_softc *fsc = (void *)self;
struct ncr53c9x_softc *sc = &fsc->sc_ncr53c9x;
struct zbus_args *zap;
/*
* Set up the glue for MI code early; we use some of it here.
*/
sc->sc_glue = &flsc_glue;
/*
* Save the regs
*/
zap = aux;
fsc->sc_dmabase = (volatile u_char *)zap->va;
fsc->sc_reg = &((volatile u_char *)zap->va)[0x1000001];
sc->sc_freq = 40; /* Clocked at 40Mhz */
printf(": address %p", fsc->sc_reg);
sc->sc_id = 7;
/*
* It is necessary to try to load the 2nd config register here,
* to find out what rev the flsc chip is, else the flsc_reset
* will not set up the defaults correctly.
*/
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE;
sc->sc_cfg3 = 0x08 /*FCLK*/ | NCRESPCFG3_FSCSI | NCRESPCFG3_CDB;
sc->sc_rev = NCR_VARIANT_FAS216;
/*
* This is the value used to start sync negotiations
* Note that the NCR register "SYNCTP" is programmed
* in "clocks per byte", and has a minimum value of 4.
* The SCSI period used in negotiation is one-fourth
* of the time (in nanoseconds) needed to transfer one byte.
* Since the chip's clock is given in MHz, we have the following
* formula: 4 * period = (1000 / freq) * 4
*/
sc->sc_minsync = 1000 / sc->sc_freq;
if (((scsi_nosync >> shift_nosync) & 0xff00) == 0xff00)
sc->sc_minsync = 0;
/* Really no limit, but since we want to fit into the TCR... */
sc->sc_maxxfer = 64 * 1024;
fsc->sc_portbits = 0xa0 | FLSC_PB_EDI | FLSC_PB_ESI;
fsc->sc_hardbits = fsc->sc_reg[0x40];
fsc->sc_alignbuf = (char *)((u_long)fsc->sc_unalignbuf & -4);
sc->sc_dev.dv_cfdata->cf_flags |= (scsi_nosync >> shift_nosync) & 0xffff;
shift_nosync += 16;
ncr53c9x_debug |= (scsi_nosync >> shift_nosync) & 0xffff;
shift_nosync += 16;
/*
* Configure interrupts.
*/
fsc->sc_isr.isr_intr = (int (*)(void *))ncr53c9x_intr;
fsc->sc_isr.isr_arg = sc;
fsc->sc_isr.isr_ipl = 2;
add_isr(&fsc->sc_isr);
fsc->sc_reg[0x40] = fsc->sc_portbits;
/*
* Now try to attach all the sub-devices
*/
sc->sc_adapter.scsipi_cmd = ncr53c9x_scsi_cmd;
sc->sc_adapter.scsipi_minphys = minphys;
ncr53c9x_attach(sc, &flsc_dev);
}
/*
* Glue functions.
*/
u_char
flsc_read_reg(sc, reg)
struct ncr53c9x_softc *sc;
int reg;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
return fsc->sc_reg[reg * 4];
}
void
flsc_write_reg(sc, reg, val)
struct ncr53c9x_softc *sc;
int reg;
u_char val;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
struct ncr53c9x_tinfo *ti;
u_char v = val;
if (fsc->sc_piomode && reg == NCR_CMD &&
v == (NCRCMD_TRANS|NCRCMD_DMA)) {
v = NCRCMD_TRANS;
}
/*
* Can't do synchronous transfers in XS_CTL_POLL mode:
* If starting XS_CTL_POLL command, clear defer sync negotiation
* by clearing the T_NEGOTIATE flag. If starting XS_CTL_POLL and
* the device is currently running synchronous, force another
* T_NEGOTIATE with 0 offset.
*/
if (reg == NCR_SELID) {
ti = &sc->sc_tinfo[
sc->sc_nexus->xs->sc_link->scsipi_scsi.target];
if (sc->sc_nexus->xs->xs_control & XS_CTL_POLL) {
if (ti->flags & T_SYNCMODE) {
ti->flags ^= T_SYNCMODE | T_NEGOTIATE;
} else if (ti->flags & T_NEGOTIATE) {
ti->flags ^= T_NEGOTIATE | T_SYNCHOFF;
/* save T_NEGOTIATE in private flags? */
}
} else {
/*
* If we haven't attempted sync negotiation yet,
* do it now.
*/
if ((ti->flags & (T_SYNCMODE | T_SYNCHOFF)) ==
T_SYNCHOFF &&
sc->sc_minsync != 0) /* XXX */
ti->flags ^= T_NEGOTIATE | T_SYNCHOFF;
}
}
if (reg == NCR_CMD && v == NCRCMD_SETATN &&
sc->sc_flags & NCR_SYNCHNEGO &&
sc->sc_nexus->xs->xs_control & XS_CTL_POLL) {
ti = &sc->sc_tinfo[
sc->sc_nexus->xs->sc_link->scsipi_scsi.target];
ti->offset = 0;
}
fsc->sc_reg[reg * 4] = v;
}
int
flsc_dma_isintr(sc)
struct ncr53c9x_softc *sc;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
unsigned hardbits;
hardbits = fsc->sc_reg[0x40];
if (hardbits & FLSC_HB_IACT)
return (fsc->sc_csr = 0);
if (sc->sc_state == NCR_CONNECTED || sc->sc_state == NCR_SELECTING)
fsc->sc_portbits |= FLSC_PB_LED;
else
fsc->sc_portbits &= ~FLSC_PB_LED;
if ((hardbits & FLSC_HB_CREQ) && !(hardbits & FLSC_HB_MINT) &&
fsc->sc_reg[NCR_STAT * 4] & NCRSTAT_INT) {
return 1;
}
/* Do I still need this? */
if (fsc->sc_piomode && fsc->sc_reg[NCR_STAT * 4] & NCRSTAT_INT &&
!(hardbits & FLSC_HB_MINT))
return 1;
fsc->sc_reg[0x40] = fsc->sc_portbits & ~FLSC_PB_INT_BITS;
fsc->sc_reg[0x40] = fsc->sc_portbits;
return 0;
}
void
flsc_clear_latched_intr(sc)
struct ncr53c9x_softc *sc;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
fsc->sc_reg[0x40] = fsc->sc_portbits & ~FLSC_PB_INT_BITS;
fsc->sc_reg[0x40] = fsc->sc_portbits;
}
void
flsc_dma_reset(sc)
struct ncr53c9x_softc *sc;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
struct ncr53c9x_tinfo *ti;
if (sc->sc_nexus)
ti = &sc->sc_tinfo[sc->sc_nexus->xs->sc_link->scsipi_scsi.target];
else
ti = &sc->sc_tinfo[1]; /* XXX */
if (fsc->sc_active) {
printf("dmaaddr %p dmasize %d stat %x flags %x off %d per %d ff %x",
*fsc->sc_dmaaddr, fsc->sc_dmasize, fsc->sc_reg[NCR_STAT * 4],
ti->flags, ti->offset, ti->period, fsc->sc_reg[NCR_FFLAG * 4]);
printf(" intr %x\n", fsc->sc_reg[NCR_INTR * 4]);
#ifdef DDB
Debugger();
#endif
}
fsc->sc_portbits &= ~FLSC_PB_DMA_BITS;
fsc->sc_reg[0x40] = fsc->sc_portbits;
fsc->sc_reg[0x80] = 0;
*((u_long *)fsc->sc_dmabase) = 0;
fsc->sc_active = 0;
fsc->sc_piomode = 0;
}
int
flsc_dma_intr(sc)
struct ncr53c9x_softc *sc;
{
register struct flsc_softc *fsc = (struct flsc_softc *)sc;
register u_char *p;
volatile u_char *cmdreg, *intrreg, *statreg, *fiforeg;
register u_int flscphase, flscstat, flscintr;
register int cnt;
NCR_DMA(("flsc_dma_intr: pio %d cnt %d int %x stat %x fifo %d ",
fsc->sc_piomode, fsc->sc_dmasize, sc->sc_espintr, sc->sc_espstat,
fsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF));
if (!(fsc->sc_reg[0x40] & FLSC_HB_CREQ))
printf("flsc_dma_intr: csr %x stat %x intr %x\n", fsc->sc_csr,
sc->sc_espstat, sc->sc_espintr);
if (fsc->sc_active == 0) {
printf("flsc_intr--inactive DMA\n");
return -1;
}
/* if DMA transfer, update sc_dmaaddr and sc_pdmalen, else PIO xfer */
if (fsc->sc_piomode == 0) {
fsc->sc_portbits &= ~FLSC_PB_DMA_BITS;
fsc->sc_reg[0x40] = fsc->sc_portbits;
fsc->sc_reg[0x80] = 0;
*((u_long *)fsc->sc_dmabase) = 0;
cnt = fsc->sc_reg[NCR_TCL * 4];
cnt += fsc->sc_reg[NCR_TCM * 4] << 8;
cnt += fsc->sc_reg[NCR_TCH * 4] << 16;
if (!fsc->sc_datain) {
cnt += fsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF;
fsc->sc_reg[NCR_CMD * 4] = NCRCMD_FLUSH;
}
cnt = fsc->sc_dmasize - cnt; /* number of bytes transferred */
NCR_DMA(("DMA xferred %d\n", cnt));
if (fsc->sc_xfr_align) {
int i;
for (i = 0; i < cnt; ++i)
(*fsc->sc_dmaaddr)[i] = fsc->sc_alignbuf[i];
fsc->sc_xfr_align = 0;
}
*fsc->sc_dmaaddr += cnt;
*fsc->sc_pdmalen -= cnt;
fsc->sc_active = 0;
return 0;
}
if ((sc->sc_espintr & NCRINTR_BS) == 0) {
fsc->sc_active = 0;
fsc->sc_piomode = 0;
NCR_DMA(("no NCRINTR_BS\n"));
return 0;
}
cnt = fsc->sc_dmasize;
#if 0
if (cnt == 0) {
printf("data interrupt, but no count left.");
}
#endif
p = *fsc->sc_dmaaddr;
flscphase = sc->sc_phase;
flscstat = (u_int) sc->sc_espstat;
flscintr = (u_int) sc->sc_espintr;
cmdreg = fsc->sc_reg + NCR_CMD * 4;
fiforeg = fsc->sc_reg + NCR_FIFO * 4;
statreg = fsc->sc_reg + NCR_STAT * 4;
intrreg = fsc->sc_reg + NCR_INTR * 4;
NCR_DMA(("PIO %d datain %d phase %d stat %x intr %x\n",
cnt, fsc->sc_datain, flscphase, flscstat, flscintr));
do {
if (fsc->sc_datain) {
*p++ = *fiforeg;
cnt--;
if (flscphase == DATA_IN_PHASE) {
*cmdreg = NCRCMD_TRANS;
} else {
fsc->sc_active = 0;
}
} else {
NCR_DMA(("flsc_dma_intr: PIO out- phase %d cnt %d active %d\n", flscphase, cnt,
fsc->sc_active));
if ( (flscphase == DATA_OUT_PHASE)
|| (flscphase == MESSAGE_OUT_PHASE)) {
int n;
n = 16 - (fsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF);
if (n > cnt)
n = cnt;
cnt -= n;
while (n-- > 0)
*fiforeg = *p++;
*cmdreg = NCRCMD_TRANS;
} else {
fsc->sc_active = 0;
}
}
if (fsc->sc_active && cnt) {
while (!(*statreg & 0x80));
flscstat = *statreg;
flscintr = *intrreg;
flscphase = (flscintr & NCRINTR_DIS)
? /* Disconnected */ BUSFREE_PHASE
: flscstat & PHASE_MASK;
}
} while (cnt && fsc->sc_active && (flscintr & NCRINTR_BS));
#if 1
if (fsc->sc_dmasize < 8 && cnt)
printf("flsc_dma_intr: short transfer: dmasize %d cnt %d\n",
fsc->sc_dmasize, cnt);
#endif
NCR_DMA(("flsc_dma_intr: PIO transfer [%d], %d->%d phase %d stat %x intr %x\n",
*fsc->sc_pdmalen, fsc->sc_dmasize, cnt, flscphase, flscstat, flscintr));
sc->sc_phase = flscphase;
sc->sc_espstat = (u_char) flscstat;
sc->sc_espintr = (u_char) flscintr;
*fsc->sc_dmaaddr = p;
*fsc->sc_pdmalen -= fsc->sc_dmasize - cnt;
fsc->sc_dmasize = cnt;
if (*fsc->sc_pdmalen == 0) {
sc->sc_espstat |= NCRSTAT_TC;
fsc->sc_piomode = 0;
}
return 0;
}
int
flsc_dma_setup(sc, addr, len, datain, dmasize)
struct ncr53c9x_softc *sc;
caddr_t *addr;
size_t *len;
int datain;
size_t *dmasize;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
paddr_t pa;
u_char *ptr;
size_t xfer;
fsc->sc_dmaaddr = addr;
fsc->sc_pdmalen = len;
fsc->sc_datain = datain;
fsc->sc_dmasize = *dmasize;
if (sc->sc_nexus->xs->xs_control & XS_CTL_POLL) {
/* polling mode, use PIO */
*dmasize = fsc->sc_dmasize;
NCR_DMA(("pfsc_dma_setup: PIO %p/%d [%d]\n", *addr,
fsc->sc_dmasize, *len));
fsc->sc_piomode = 1;
if (datain == 0) {
int n;
n = fsc->sc_dmasize;
if (n > 16)
n = 16;
while (n-- > 0) {
fsc->sc_reg[NCR_FIFO * 4] = **fsc->sc_dmaaddr;
(*fsc->sc_pdmalen)--;
(*fsc->sc_dmaaddr)++;
--fsc->sc_dmasize;
}
}
return 0;
}
/*
* DMA can be nasty for high-speed serial input, so limit the
* size of this DMA operation if the serial port is running at
* a high speed (higher than 19200 for now - should be adjusted
* based on cpu type and speed?).
* XXX - add serial speed check XXX
*/
if (ser_open_speed > 19200 && flsc_max_dma != 0 &&
fsc->sc_dmasize > flsc_max_dma)
fsc->sc_dmasize = flsc_max_dma;
ptr = *addr; /* Kernel virtual address */
pa = kvtop(ptr); /* Physical address of DMA */
xfer = min(fsc->sc_dmasize, NBPG - (pa & (NBPG - 1)));
fsc->sc_xfr_align = 0;
fsc->sc_piomode = 0;
fsc->sc_portbits &= ~FLSC_PB_DMA_BITS;
fsc->sc_reg[0x40] = fsc->sc_portbits;
fsc->sc_reg[0x80] = 0;
*((u_long *)fsc->sc_dmabase) = 0;
/*
* If output and length < 16, copy to fifo
*/
if (datain == 0 && fsc->sc_dmasize < 16) {
int n;
for (n = 0; n < fsc->sc_dmasize; ++n)
fsc->sc_reg[NCR_FIFO * 4] = *ptr++;
NCR_DMA(("flsc_dma_setup: %d bytes written to fifo\n", n));
fsc->sc_piomode = 1;
fsc->sc_active = 1;
*fsc->sc_pdmalen -= fsc->sc_dmasize;
*fsc->sc_dmaaddr += fsc->sc_dmasize;
*dmasize = fsc->sc_dmasize;
fsc->sc_dmasize = 0;
return 0; /* All done */
}
/*
* If output and unaligned, copy unaligned data to fifo
*/
else if (datain == 0 && (int)ptr & 3) {
int n = 4 - ((int)ptr & 3);
NCR_DMA(("flsc_dma_setup: align %d bytes written to fifo\n", n));
pa += n;
xfer -= n;
while (n--)
fsc->sc_reg[NCR_FIFO * 4] = *ptr++;
}
/*
* If unaligned address, read unaligned bytes into alignment buffer
*/
else if ((int)ptr & 3 || xfer & 3) {
pa = kvtop((caddr_t)fsc->sc_alignbuf);
xfer = fsc->sc_dmasize = min(xfer, sizeof (fsc->sc_unalignbuf));
NCR_DMA(("flsc_dma_setup: align read by %d bytes\n", xfer));
fsc->sc_xfr_align = 1;
}
/*
* If length smaller than longword, read into alignment buffer
* XXX doesn't work for 1 or 2 bytes !!!!
*/
else if (fsc->sc_dmasize < 4) {
NCR_DMA(("flsc_dma_setup: read remaining %d bytes\n",
fsc->sc_dmasize));
pa = kvtop((caddr_t)fsc->sc_alignbuf);
fsc->sc_xfr_align = 1;
}
/*
* Finally, limit transfer length to multiple of 4 bytes.
*/
else {
fsc->sc_dmasize &= -4;
xfer &= -4;
}
while (xfer < fsc->sc_dmasize) {
if ((pa + xfer) != kvtop(*addr + xfer))
break;
if ((fsc->sc_dmasize - xfer) < NBPG)
xfer = fsc->sc_dmasize;
else
xfer += NBPG;
}
fsc->sc_dmasize = xfer;
*dmasize = fsc->sc_dmasize;
fsc->sc_pa = pa;
#if defined(M68040) || defined(M68060)
if (mmutype == MMU_68040) {
if (fsc->sc_xfr_align) {
int n;
for (n = 0; n < sizeof (fsc->sc_unalignbuf); ++n)
fsc->sc_alignbuf[n] = n | 0x80;
dma_cachectl(fsc->sc_alignbuf,
sizeof(fsc->sc_unalignbuf));
}
else
dma_cachectl(*fsc->sc_dmaaddr, fsc->sc_dmasize);
}
#endif
fsc->sc_reg[0x80] = 0;
*((u_long *)(fsc->sc_dmabase + (pa & 0x00fffffc))) = pa;
fsc->sc_portbits &= ~FLSC_PB_DMA_BITS;
fsc->sc_portbits |= FLSC_PB_ENABLE_DMA |
(fsc->sc_datain ? FLSC_PB_DMA_READ : FLSC_PB_DMA_WRITE);
fsc->sc_reg[0x40] = fsc->sc_portbits;
NCR_DMA(("flsc_dma_setup: DMA %p->%lx/%d [%d]\n",
ptr, pa, fsc->sc_dmasize, *len));
fsc->sc_active = 1;
return 0;
}
void
flsc_dma_go(sc)
struct ncr53c9x_softc *sc;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
NCR_DMA(("flsc_dma_go: datain %d size %d\n", fsc->sc_datain,
fsc->sc_dmasize));
if (sc->sc_nexus->xs->xs_control & XS_CTL_POLL) {
fsc->sc_active = 1;
return;
} else if (fsc->sc_piomode == 0) {
fsc->sc_portbits &= ~FLSC_PB_DMA_BITS;
fsc->sc_portbits |= FLSC_PB_ENABLE_DMA |
(fsc->sc_datain ? FLSC_PB_DMA_READ : FLSC_PB_DMA_WRITE);
fsc->sc_reg[0x40] = fsc->sc_portbits;
}
}
void
flsc_dma_stop(sc)
struct ncr53c9x_softc *sc;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
fsc->sc_portbits &= ~FLSC_PB_DMA_BITS;
fsc->sc_reg[0x40] = fsc->sc_portbits;
fsc->sc_reg[0x80] = 0;
*((u_long *)fsc->sc_dmabase) = 0;
fsc->sc_piomode = 0;
}
int
flsc_dma_isactive(sc)
struct ncr53c9x_softc *sc;
{
struct flsc_softc *fsc = (struct flsc_softc *)sc;
return fsc->sc_active;
}