Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/isa/cs89x0isa.c

390 lines
11 KiB
C
Raw Blame History

/* $NetBSD: cs89x0isa.c,v 1.16 2012/02/02 19:43:04 tls Exp $ */
/*
* Copyright 1997
* Digital Equipment Corporation. All rights reserved.
*
* This software is furnished under license and may be used and
* copied only in accordance with the following terms and conditions.
* Subject to these conditions, you may download, copy, install,
* use, modify and distribute this software in source and/or binary
* form. No title or ownership is transferred hereby.
*
* 1) Any source code used, modified or distributed must reproduce
* and retain this copyright notice and list of conditions as
* they appear in the source file.
*
* 2) No right is granted to use any trade name, trademark, or logo of
* Digital Equipment Corporation. Neither the "Digital Equipment
* Corporation" name nor any trademark or logo of Digital Equipment
* Corporation may be used to endorse or promote products derived
* from this software without the prior written permission of
* Digital Equipment Corporation.
*
* 3) This software is provided "AS-IS" and any express or implied
* warranties, including but not limited to, any implied warranties
* of merchantability, fitness for a particular purpose, or
* non-infringement are disclaimed. In no event shall DIGITAL be
* liable for any damages whatsoever, and in particular, DIGITAL
* shall not be liable for special, indirect, consequential, or
* incidental damages or damages for lost profits, loss of
* revenue or loss of use, whether such damages arise in contract,
* negligence, tort, under statute, in equity, at law or otherwise,
* even if advised of the possibility of such damage.
*/
/* isa DMA routines for cs89x0 */
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: cs89x0isa.c,v 1.16 2012/02/02 19:43:04 tls Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/device.h>
#include <sys/rnd.h>
#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <sys/bus.h>
#include <dev/isa/isareg.h>
#include <dev/isa/isavar.h>
#include <dev/isa/isadmavar.h>
#include <dev/ic/cs89x0reg.h>
#include <dev/ic/cs89x0var.h>
#include <dev/isa/cs89x0isavar.h>
#define DMA_STATUS_BITS 0x0007 /* bit masks for checking DMA status */
#define DMA_STATUS_OK 0x0004
void
cs_isa_dma_attach(struct cs_softc *sc)
{
struct cs_softc_isa *isc = (struct cs_softc_isa *)sc;
if (isc->sc_drq == ISA_UNKNOWN_DRQ)
printf("%s: DMA channel unspecified, not using DMA\n",
device_xname(sc->sc_dev));
else if (isc->sc_drq < 5 || isc->sc_drq > 7)
printf("%s: invalid DMA channel, not using DMA\n",
device_xname(sc->sc_dev));
else {
bus_size_t maxsize;
bus_addr_t dma_addr;
maxsize = isa_dmamaxsize(isc->sc_ic, isc->sc_drq);
if (maxsize < CS8900_DMASIZE) {
printf("%s: max DMA size %lu is"
" less than required %d\n",
device_xname(sc->sc_dev), (u_long)maxsize,
CS8900_DMASIZE);
goto after_dma_block;
}
if (isa_drq_alloc(isc->sc_ic, isc->sc_drq) != 0) {
aprint_error_dev(sc->sc_dev,
"unable to reserve drq %d\n",
isc->sc_drq);
goto after_dma_block;
}
if (isa_dmamap_create(isc->sc_ic, isc->sc_drq,
CS8900_DMASIZE, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW) != 0) {
aprint_error_dev(sc->sc_dev,
"unable to create ISA DMA map\n");
goto after_dma_block;
}
if (isa_dmamem_alloc(isc->sc_ic, isc->sc_drq,
CS8900_DMASIZE, &dma_addr, BUS_DMA_NOWAIT) != 0) {
aprint_error_dev(sc->sc_dev,
"unable to allocate DMA buffer\n");
goto after_dma_block;
}
if (isa_dmamem_map(isc->sc_ic, isc->sc_drq, dma_addr,
CS8900_DMASIZE, (void **)&isc->sc_dmabase,
BUS_DMA_NOWAIT | BUS_DMA_COHERENT /* XXX */ ) != 0) {
aprint_error_dev(sc->sc_dev,
"unable to map DMA buffer\n");
isa_dmamem_free(isc->sc_ic, isc->sc_drq, dma_addr,
CS8900_DMASIZE);
goto after_dma_block;
}
isc->sc_dmasize = CS8900_DMASIZE;
sc->sc_cfgflags |= CFGFLG_DMA_MODE;
isc->sc_dmaaddr = dma_addr;
after_dma_block:
;
}
}
void cs_isa_dma_chipinit(struct cs_softc *sc)
{
struct cs_softc_isa *isc = (struct cs_softc_isa *)sc;
if (sc->sc_cfgflags & CFGFLG_DMA_MODE) {
/*
* First we program the DMA controller and ensure the memory
* buffer is valid. If it isn't then we just go on without
* DMA.
*/
if (isa_dmastart(isc->sc_ic, isc->sc_drq, isc->sc_dmabase,
isc->sc_dmasize, NULL, DMAMODE_READ | DMAMODE_LOOPDEMAND,
BUS_DMA_NOWAIT)) {
/* XXX XXX XXX */
panic("%s: unable to start DMA",
device_xname(sc->sc_dev));
}
isc->sc_dmacur = isc->sc_dmabase;
/* interrupt when a DMA'd frame is received */
CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG,
RX_CFG_ALL_IE | RX_CFG_RX_DMA_ONLY);
/*
* set the DMA burst bit so we don't tie up the bus for too
* long.
*/
if (isc->sc_dmasize == 16384) {
CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL,
((CS_READ_PACKET_PAGE(sc, PKTPG_BUS_CTL) &
~BUS_CTL_DMA_SIZE) | BUS_CTL_DMA_BURST));
} else { /* use 64K */
CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL,
CS_READ_PACKET_PAGE(sc, PKTPG_BUS_CTL) |
BUS_CTL_DMA_SIZE | BUS_CTL_DMA_BURST);
}
CS_WRITE_PACKET_PAGE(sc, PKTPG_DMA_CHANNEL, isc->sc_drq - 5);
}
}
void cs_process_rx_dma(struct cs_softc *sc)
{
struct cs_softc_isa *isc = (struct cs_softc_isa *)sc;
struct ifnet *ifp;
u_int16_t num_dma_frames;
u_int16_t pkt_length;
u_int16_t status;
u_int to_copy;
char *dma_mem_ptr;
struct mbuf *m;
u_char *pBuff;
int pad;
/* initialise the pointers */
ifp = &sc->sc_ethercom.ec_if;
/* Read the number of frames DMAed. */
num_dma_frames = CS_READ_PACKET_PAGE(sc, PKTPG_DMA_FRAME_COUNT);
num_dma_frames &= (u_int16_t) (0x0fff);
/*
* Loop till number of DMA frames ready to read is zero. After
* reading the frame out of memory we must check if any have been
* received while we were processing
*/
while (num_dma_frames != 0) {
dma_mem_ptr = isc->sc_dmacur;
/*
* process all of the DMA frames in memory
*
* This loop relies on the dma_mem_ptr variable being set to the
* next frames start address.
*/
for (; num_dma_frames > 0; num_dma_frames--) {
/*
* Get the length and status of the packet. Only the
* status is guaranteed to be at dma_mem_ptr, ie need
* to check for wraparound before reading the length
*/
status = *((u_int16_t *) dma_mem_ptr);
dma_mem_ptr += 2;
if (dma_mem_ptr > (isc->sc_dmabase + isc->sc_dmasize)) {
dma_mem_ptr = isc->sc_dmabase;
}
pkt_length = *((u_int16_t *) dma_mem_ptr);
dma_mem_ptr += 2;
/* Do some sanity checks on the length and status. */
if ((pkt_length > ETHER_MAX_LEN) ||
((status & DMA_STATUS_BITS) != DMA_STATUS_OK)) {
/*
* the SCO driver kills the adapter in this
* situation
*/
/*
* should increment the error count and reset
* the DMA operation.
*/
printf("%s: cs_process_rx_dma: "
"DMA buffer out of sync about to reset\n",
device_xname(sc->sc_dev));
ifp->if_ierrors++;
/* skip the rest of the DMA buffer */
isa_dmaabort(isc->sc_ic, isc->sc_drq);
/* now reset the chip and reinitialise */
cs_init(&sc->sc_ethercom.ec_if);
return;
}
/* Check the status of the received packet. */
if (status & RX_EVENT_RX_OK) {
/* get a new mbuf */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
printf("%s: cs_process_rx_dma: "
"unable to allocate mbuf\n",
device_xname(sc->sc_dev));
ifp->if_ierrors++;
/*
* couldn't allocate an mbuf so
* things are not good, may as well
* drop all the packets I think.
*/
CS_READ_PACKET_PAGE(sc,
PKTPG_DMA_FRAME_COUNT);
/* now reset DMA operation */
isa_dmaabort(isc->sc_ic, isc->sc_drq);
/*
* now reset the chip and
* reinitialise
*/
cs_init(&sc->sc_ethercom.ec_if);
return;
}
/*
* save processing by always using a mbuf
* cluster, guaranteed to fit packet
*/
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
/* couldn't allocate an mbuf cluster */
printf("%s: cs_process_rx_dma: "
"unable to allocate a cluster\n",
device_xname(sc->sc_dev));
m_freem(m);
/* skip the frame */
CS_READ_PACKET_PAGE(sc, PKTPG_DMA_FRAME_COUNT);
isa_dmaabort(isc->sc_ic, isc->sc_drq);
/*
* now reset the chip and
* reinitialise
*/
cs_init(&sc->sc_ethercom.ec_if);
return;
}
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = pkt_length;
m->m_len = pkt_length;
/*
* align ip header on word boundary for
* ipintr
*/
pad = ALIGN(sizeof(struct ether_header)) -
sizeof(struct ether_header);
m->m_data += pad;
/*
* set up the buffer pointer to point to the
* data area
*/
pBuff = mtod(m, char *);
/*
* Read the frame into free_pktbuf
* The buffer is circular buffer, either
* 16K or 64K in length.
*
* need to check where the end of the buffer
* is and go back to the start.
*/
if ((dma_mem_ptr + pkt_length) <
(isc->sc_dmabase + isc->sc_dmasize)) {
/*
* No wrap around. Copy the frame
* header
*/
memcpy(pBuff, dma_mem_ptr, pkt_length);
dma_mem_ptr += pkt_length;
} else {
to_copy = (u_int)
((isc->sc_dmabase + isc->sc_dmasize) -
dma_mem_ptr);
/* Copy the first half of the frame. */
memcpy(pBuff, dma_mem_ptr, to_copy);
pBuff += to_copy;
/*
* Rest of the frame is to be read
* from the first byte of the DMA
* memory.
*/
/*
* Get the number of bytes leftout in
* the frame.
*/
to_copy = pkt_length - to_copy;
dma_mem_ptr = isc->sc_dmabase;
/* Copy rest of the frame. */
memcpy(pBuff, dma_mem_ptr, to_copy);
dma_mem_ptr += to_copy;
}
cs_ether_input(sc, m);
}
/* (status & RX_OK) */
else {
/* the frame was not received OK */
/* Increment the input error count */
ifp->if_ierrors++;
/*
* If debugging is enabled then log error
* messages if we got any.
*/
if ((ifp->if_flags & IFF_DEBUG) &&
status != REG_NUM_RX_EVENT)
cs_print_rx_errors(sc, status);
}
/*
* now update the current frame pointer. the
* dma_mem_ptr should point to the next packet to be
* received, without the alignment considerations.
*
* The cs8900 pads all frames to start at the next 32bit
* aligned addres. hence we need to pad our offset
* pointer.
*/
dma_mem_ptr += 3;
dma_mem_ptr = (char *)
((long) dma_mem_ptr & 0xfffffffc);
if (dma_mem_ptr < (isc->sc_dmabase + isc->sc_dmasize)) {
isc->sc_dmacur = dma_mem_ptr;
} else {
dma_mem_ptr = isc->sc_dmacur = isc->sc_dmabase;
}
} /* for all frames */
/* Read the number of frames DMAed again. */
num_dma_frames = CS_READ_PACKET_PAGE(sc, PKTPG_DMA_FRAME_COUNT);
num_dma_frames &= (u_int16_t) (0x0fff);
} /* while there are frames left */
}
Reference in New Issue View Git Blame Copy Permalink