NetBSD/sys/arch/pc532/dev/scnreg.h

208 lines
6.3 KiB
C

/*
* Copyright (c) 1993 Philip A. Nelson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Philip A. Nelson.
* 4. The name of Philip A. Nelson may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY PHILIP NELSON ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL PHILIP NELSON BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* dpreg.h: definitions for the dp driver.
*
* $Id: scnreg.h,v 1.1.1.1 1993/09/09 23:53:52 phil Exp $
*/
/* Constants. */
#ifdef COMDEF_SPEED
#undef TTYDEF_SPEED
#define TTYDEF_SPEED COMDEF_SPEED /* default baud rate */
#endif
#define SCN_FIRST_ADR 0x28000000 /* address of first RS232 port */
#define SCN_FIRST_MAP_ADR 0xFFC80000 /* mapped address of first port */
#define SCN_SIZE 0x8 /* address space for port */
#define SCN_CONSOLE 0 /* minor number of console */
#define SCN_CON_MAP_STAT 0xFFC80001 /* raw addresses for console */
#define SCN_CON_MAP_DATA 0xFFC80003 /* Mapped .... */
#define SCN_CONSOLE_STAT 0x28000001 /* raw addresses for console */
#define SCN_CONSOLE_DATA 0x28000003 /* Unmapped .... */
/* SCN2691 registers, values. */
#define LINE_SZ 0x08
#define UART_SZ 0x10
#define MR_ADR (line_base+0)
#define STAT_ADR (line_base+1)
#define SPEED_ADR (line_base+1)
#define CMD_ADR (line_base+2)
#define DATA_ADR (line_base+3)
#define IPCR_ADR (uart_base+4)
#define ACR_ADR (uart_base+4)
#define ISR_ADR (uart_base+5)
#define IMR_ADR (uart_base+5)
#define IP_ADR (uart_base+13)
#define OPCR_ADR (uart_base+13)
#define SET_OP_ADR (uart_base+14)
#define CLR_OP_ADR (uart_base+15)
/* Data Values */
#define LC_ODD 0x04
#define LC_EVEN 0x00
#define LC_NONE 0x10
#define LC_STOP1 0x07
#define LC_STOP2 0x0f
#define LC_BITS5 0x00
#define LC_BITS6 0x01
#define LC_BITS7 0x02
#define LC_BITS8 0x03
#define LC_CHARS 0x03
#define LC_CHARS_SHIFT 0x08
#define LC_SP_GRP 0x10
#define LC_SP_BOTH 0x20
#define RTS_BIT 0x1
#define CTS_BIT 0x1
#define DTR_BIT 0x4
#define DCD_BIT 0x4
/* CR (command) register values. */
#define CMD_ENA_RX 0x01
#define CMD_DIS_RX 0x02
#define CMD_ENA_TX 0x04
#define CMD_DIS_TX 0x08
#define CMD_MR1 0x10
#define CMD_RESET_RX 0x20
#define CMD_RESET_TX 0x30
#define CMD_RESET_ERR 0x40
#define CMD_RESET_BRK 0x50
#define CMD_START_BRK 0x60
#define CMD_STOP_BRK 0x70
/* SR register */
#define SR_RX_RDY 0x01
#define SR_TX_RDY 0x04
#define SR_BREAK 0x80
#define SR_FRAME 0x40
#define SR_PARITY 0x20
#define SR_OVERRUN 0x10
/* Output port configuration. */
#define OPCR_CONFIG 0x00
/* Input port interrupt config. */
#define ACR_CTS 0x01
#define ACR_DCD 0x04
#define IPCR_CTS 0x10
#define IPCR_DCD 0x40
/* Interrupt configurations. */
#define IMR_IP_INT 0x80
#define IMR_BRK_INT 0x04
#define IMR_RX_INT 0x02
#define IMR_TX_INT 0x01
#define IMR_BRKB_INT 0x40
#define IMR_RXB_INT 0x20
#define IMR_TXB_INT 0x10
/* If we need a delay.... */
#define DELAY(x) {int i; for (i=0; i<x*10000; i++); }
#define istart(rs) \
(WR_ADR(u_char, rs->opset_port, (RTS_BIT | DTR_BIT) << (rs)->a_or_b))
#define istop(rs) \
(WR_ADR(u_char, rs->opclr_port, RTS_BIT << (rs)->a_or_b))
#define get_dcd(rs) \
(RD_ADR(u_char, rs->ip_port) & (DCD_BIT << (1-rs->a_or_b)))
#define tx_rdy(rs) \
(RD_ADR(u_char, rs->stat_port) & SR_TX_RDY)
/* Interrupts on and off. */
#define tx_ints_off(rs) \
{ rs->uart->imr_int_bits &= ~(IMR_TX_INT) << (4*rs->a_or_b); \
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
#define tx_ints_on(rs) \
{ rs->uart->imr_int_bits |= (IMR_TX_INT) << (4*rs->a_or_b); \
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
#define rx_ints_off(rs) \
{ rs->uart->imr_int_bits &= ~(IMR_RX_INT) << (4*rs->a_or_b); \
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
#define rx_ints_on(rs) \
{ rs->uart->imr_int_bits |= (IMR_RX_INT) << (4*rs->a_or_b); \
WR_ADR (u_char, rs->uart->imr_port, rs->uart->imr_int_bits); }
/* Structure definitions. */
typedef unsigned long port_t;
/* The DUART description table */
struct duart_info {
char i_speed[2], o_speed[2]; /* Channel A and B speeds. */
char i_code[2], o_code[2]; /* Channel A and B speeds. */
char speed_grp; /* ACR bit 7 */
char acr_int_bits; /* ACR bits 0-6 */
char imr_int_bits; /* IMR bits current set. */
port_t isr_port;
port_t imr_port;
port_t ipcr_port;
port_t opcr_port;
};
/* RS232 device structure, one per device. */
struct rs232_s {
int unit; /* unit number of this line (base 0) */
struct duart_info *uart; /* pointer to uart struct */
char a_or_b; /* 0 => A, 1 => B */
long scn_bits; /* Temp! for TIOCM ... */
port_t xmit_port; /* i/o ports */
port_t recv_port;
port_t mr_port;
port_t stat_port; /* sra or srb */
port_t speed_port; /* csra or csrb */
port_t cmd_port; /* cra or crb */
port_t acr_port;
port_t ip_port;
port_t opset_port;
port_t opclr_port;
unsigned char lstatus; /* last line status */
unsigned framing_errors; /* error counts (no reporting yet) */
unsigned overrun_errors;
unsigned parity_errors;
unsigned break_interrupts;
};