NetBSD/sys/dev/ic/ninjascsi32reg.h

464 lines
17 KiB
C

/* $NetBSD: ninjascsi32reg.h,v 1.1 2004/08/26 14:13:46 itohy Exp $ */
/*-
* Copyright (c) 2004 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by ITOH Yasufumi.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _NJSC32REG_H_
#define _NJSC32REG_H_
/*
* Workbit NinjaSCSI (32bit versions), Ultra Narrow SCSI3 host adapters:
* NJSC-32Bi PCMCIA/CardBus dual mode device ("DuoSCSI")
* (CardBus mode only)
* NJSC-32UDE PCI/CardBus device, DualEdge transfer support
*/
#define NJSC32_REGSIZE 128 /* size of register set */
#define NJSC32_MEMOFFSET_REG 0x800 /* offset of memory mapped register */
/*
* Direct registers
*/
#define NJSC32_REG_IRQ 0x00 /* len=2 R/W */
# define NJSC32_IRQ_MSG 0x0001
# define NJSC32_IRQ_IO 0x0002
# define NJSC32_IRQ_CD 0x0004
# define NJSC32_IRQ_BUS_FREE 0x0008
# define NJSC32_IRQ_RESELECT 0x0010
# define NJSC32_IRQ_PHASE_CHANGE 0x0020
# define NJSC32_IRQ_SCSIRESET 0x0040
# define NJSC32_IRQ_TIMER 0x0080
# define NJSC32_IRQ_FIFO_THRESHOLD 0x0100
# define NJSC32_IRQ_PCI 0x0200
# define NJSC32_IRQ_BMCNTERR 0x0400
# define NJSC32_IRQ_AUTOSCSI 0x0800
# define NJSC32_IRQ_MASK_PCI 0x1000
# define NJSC32_IRQ_MASK_TIMER 0x2000
# define NJSC32_IRQ_MASK_FIFO 0x4000
# define NJSC32_IRQ_MASK_SCSI 0x8000
# define NJSC32_IRQ_MASK_ALL 0xf000
# define NJSC32_IRQ_INTR_PENDING 0x0ff0
#define NJSC32_REG_TRANSFER 0x02 /* len=2 R/W */
# define NJSC32_XFR_CB_MMIO_MODE 0x0001
# define NJSC32_XFR_CB_PIO_MODE 0x0002
# define NJSC32_XFR_BM_TEST 0x0004
# define NJSC32_XFR_BM_TEST_DIR 0x0008
# define NJSC32_XFR_DUALEDGE_ENABLE 0x0010 /* (UDE) */
# define NJSC32_XFR_NO_XFER_TO_HOST 0x0020 /* (UDE) */
/* reserved */
# define NJSC32_XFR_TRANSFER_GO 0x0080
# define NJSC32_XFR_BLIND_MODE 0x0100
# define NJSC32_XFR_BM_START 0x0200
# define NJSC32_XFR_ADVANCED_BM_WRITE 0x0400
# define NJSC32_XFR_BM_SINGLE_MODE 0x0800
# define NJSC32_XFR_FIFO_FULL 0x1000 /* RO */
# define NJSC32_XFR_FIFO_EMPTY 0x2000 /* RO */
# define NJSC32_XFR_ALL_COUNT_CLR 0x4000
# define NJSC32_XFR_FIFO_TEST 0x8000
#define NJSC32_REG_INDEX 0x04 /* len=1 R/W, len=2 RO */
# define NJSC32_INDEX_GAREV(x) ((x) >> 8)
# define NJSC32_INDEX_GAREV_MIN 0x51
#define NJSC32_REG_TIMER 0x06 /* len=2 R/W */
# define NJSC32_TIMER_CNT_MASK 0x00ff
# define NJSC32_TIMER_STOP 0x0100
#define NJSC32_REG_DATA_LOW 0x08 /* len=2 R/W */
#define NJSC32_REG_DATA_HIGH 0x0a /* len=2 R/W */
#define NJSC32_REG_FIFO_REST_CNT 0x0c /* len=2 R/W */
# define NJSC32_FIFOCNT_MASK 0x01ff
# define NJSC32_FIFOCNT_LOW_WATER 0x4000
# define NJSC32_FIFOCNT_HIGH_WATER 0x8000
#define NJSC32_REG_SREQ_SAMPLING 0x0f /* len=1 R/W */
# define NJSC32_SREQ_SAMPLING_RATE0 0x01
# define NJSC32_SREQ_SAMPLING_RATE1 0x02
# define NJSC32_SREQ_SAMPLING_ENABLE 0x04
# define NJSC32_SREQ_SAMPLING_1CLK 0
# define NJSC32_SREQ_SAMPLING_2CLK NJSC32_SREQ_SAMPLING_RATE0
# define NJSC32_SREQ_SAMPLING_4CLK NJSC32_SREQ_SAMPLING_RATE1
#define NJSC32_REG_SCSI_BUS_CONTROL 0x10 /* len=1 R/W */
# define NJSC32_SBCTL_SEL 0x01
# define NJSC32_SBCTL_RST 0x02
# define NJSC32_SBCTL_DATAOUT_ENABLE 0x04
# define NJSC32_SBCTL_ATN 0x08
# define NJSC32_SBCTL_ACK 0x10
# define NJSC32_SBCTL_BSY 0x20
# define NJSC32_SBCTL_AUTODIRECTION 0x40
# define NJSC32_SBCTL_ACK_ENABLE 0x80
#define NJSC32_REG_CLR_COUNTER 0x12 /* len=1 WO */
# define NJSC32_CLRCNT_ACK 0x01
# define NJSC32_CLRCNT_REQ 0x02
# define NJSC32_CLRCNT_FIFO_HOST_PTR 0x04
# define NJSC32_CLRCNT_FIFO_REST 0x08
# define NJSC32_CLRCNT_BM 0x10
# define NJSC32_CLRCNT_SAVED_ACK 0x20
# define NJSC32_CLCNT_ALL 0x3f
#define NJSC32_REG_SCSI_BUS_MONITOR 0x12 /* len=1 RO */
# define NJSC32_BUSMON_MSG 0x01
# define NJSC32_BUSMON_IO 0x02
# define NJSC32_BUSMON_CD 0x04
# define NJSC32_BUSMON_BSY 0x08
# define NJSC32_BUSMON_ACK 0x10
# define NJSC32_BUSMON_REQ 0x20
# define NJSC32_BUSMON_SEL 0x40
# define NJSC32_BUSMON_ATN 0x80
# define NJSC32_BUSMON_BUSFREE 0x00
# define NJSC32_BUSMON_COMMAND (NJSC32_BUSMON_CD | \
NJSC32_BUSMON_BSY | NJSC32_BUSMON_REQ)
# define NJSC32_BUSMON_MESSAGE_IN (NJSC32_BUSMON_MSG | \
NJSC32_BUSMON_BSY | NJSC32_BUSMON_IO | NJSC32_BUSMON_CD | \
NJSC32_BUSMON_REQ)
# define NJSC32_BUSMON_MESSAGE_OUT (NJSC32_BUSMON_MSG | \
NJSC32_BUSMON_BSY | NJSC32_BUSMON_CD | NJSC32_BUSMON_REQ)
# define NJSC32_BUSMON_DATA_IN (NJSC32_BUSMON_IO | \
NJSC32_BUSMON_BSY | NJSC32_BUSMON_REQ)
# define NJSC32_BUSMON_DATA_OUT (NJSC32_BUSMON_BSY | \
NJSC32_BUSMON_REQ)
# define NJSC32_BUSMON_STATUS (NJSC32_BUSMON_IO | \
NJSC32_BUSMON_CD | NJSC32_BUSMON_BSY | NJSC32_BUSMON_REQ)
# define NJSC32_BUSMON_RESELECT (NJSC32_BUSMON_IO | NJSC32_BUSMON_SEL)
# define NJSC32_BUSMON_PHASE_MASK (NJSC32_BUSMON_MSG | \
NJSC32_BUSMON_IO | NJSC32_BUSMON_BSY | NJSC32_BUSMON_CD | \
NJSC32_BUSMON_SEL)
# define NJSC32_PHASE_BUSFREE \
(NJSC32_BUSMON_BUSFREE & NJSC32_BUSMON_PHASE_MASK)
# define NJSC32_PHASE_COMMAND \
(NJSC32_BUSMON_COMMAND & NJSC32_BUSMON_PHASE_MASK)
# define NJSC32_PHASE_MESSAGE_IN \
(NJSC32_BUSMON_MESSAGE_IN & NJSC32_BUSMON_PHASE_MASK)
# define NJSC32_PHASE_MESSAGE_OUT \
(NJSC32_BUSMON_MESSAGE_OUT & NJSC32_BUSMON_PHASE_MASK)
# define NJSC32_PHASE_DATA_IN \
(NJSC32_BUSMON_DATA_IN & NJSC32_BUSMON_PHASE_MASK)
# define NJSC32_PHASE_DATA_OUT \
(NJSC32_BUSMON_DATA_OUT & NJSC32_BUSMON_PHASE_MASK)
# define NJSC32_PHASE_STATUS \
(NJSC32_BUSMON_STATUS & NJSC32_BUSMON_PHASE_MASK)
# define NJSC32_PHASE_RESELECT \
(NJSC32_BUSMON_RESELECT & NJSC32_BUSMON_PHASE_MASK)
#define NJSC32_REG_COMMAND_DATA 0x14 /* len=1 R/W */
#define NJSC32_REG_PARITY_CONTROL 0x16 /* len=1 WO */
# define NJSC32_PARITYCTL_CHECK_ENABLE 0x01
# define NJSC32_PARITYCTL_CLEAR_ERROR 0x02
#define NJSC32_REG_PARITY_STATUS 0x16 /* len=1 RO */
# define NJSC32_PARITYSTATUS_ERROR_LSB 0x02
# define NJSC32_PARITYSTATUS_ERROR_MSB 0x04 /* (UDE) */
#define NJSC32_REG_RESELECT_ID 0x18 /* len=1 RO */
#define NJSC32_REG_COMMAND_CONTROL 0x18 /* len=2 WO */
# define NJSC32_CMD_CLEAR_CDB_FIFO_PTR 0x0001
# define NJSC32_CMD_AUTO_COMMAND_PHASE 0x0002
# define NJSC32_CMD_AUTO_SCSI_START 0x0004
# define NJSC32_CMD_AUTO_SCSI_RESTART 0x0008
# define NJSC32_CMD_AUTO_PARAMETER 0x0010 /* load parameters via DMA */
# define NJSC32_CMD_AUTO_ATN 0x0020
# define NJSC32_CMD_AUTO_MSGIN_00_04 0x0040 /* Command Complete (00)
or Disconnect (04) */
# define NJSC32_CMD_AUTO_MSGIN_02 0x0080 /* Save Data Pointer */
# define NJSC32_CMD_AUTO_MSGIN_03 0x0100 /* Restore Pointers */
#define NJSC32_REG_SET_ARBITRATION 0x1a /* len=1 WO */
# define NJSC32_SETARB_GO 0x01
# define NJSC32_SETARB_CLEAR 0x02
#define NJSC32_REG_ARBITRATION_STAT 0x1a /* len=1 RO */
# define NJSC32_ARBSTAT_WIN 0x02
# define NJSC32_ARBSTAT_FAIL 0x04
# define NJSC32_ARBSTAT_AUTOPARAM_VALID 0x08
# define NJSC32_ARBSTAT_SG_TABLE_VALID 0x10
#define NJSC32_REG_SYNC 0x1c /* len=1 R/W */
# define NJSC32_SYNC_VAL(periodnum, syncoffset) ((periodnum)<<4 | (syncoffset))
# define NJSC32_SYNCPERIOD_ASYNC 0
# define NJSC32_SYNCOFFSET_ASYNC 0
# define NJSC32_SYNCOFFSET_MAX 15
#define NJSC32_REG_ACK_WIDTH 0x1d /* len=1 R/W */
# define NJSC32_ACK_WIDTH_1CLK 0
# define NJSC32_ACK_WIDTH_2CLK 1
# define NJSC32_ACK_WIDTH_3CLK 2
# define NJSC32_ACK_WIDTH_4CLK 3
#define NJSC32_REG_SCSI_DATA_WITH_ACK 0x20 /* len=1 R/W */
#define NJSC32_REG_SCSI_OUT_LATCH 0x22 /* len=1 W */
#define NJSC32_REG_TARGET_ID 0x22 /* len=1 W */
#define NJSC32_REG_DATA_IN 0x22 /* len=1 R */
#define NJSC32_REG_SCAM_CONTROL 0x24 /* len=1 R/W */
# define NJSC32_SCAMCTL_MSG 0x01
# define NJSC32_SCAMCTL_IO 0x02
# define NJSC32_SCAMCTL_CD 0x04
# define NJSC32_SCAMCTL_BSY 0x08
# define NJSC32_SCAMCTL_SEL 0x10
# define NJSC32_SCAMCTL_XFEROK 0x20
#define NJSC32_REG_SCAM_DATA 0x26 /* len=1 R/W */
#define NJSC32_REG_SACK_CNT 0x28 /* len=4 R/W */
#define NJSC32_REG_SREQ_CNT 0x2c /* len=4 R/W */
#define NJSC32_REG_FIFO_DATA 0x30 /* len=4 R/W */
#define NJSC32_REG_FIFO_ADR 0x34 /* len=4 R/W */
#define NJSC32_REG_BM_CNT 0x38 /* len=4 R/W */
# define NJSC32_BMCNT_MASK 0x0001ffff
#define NJSC32_REG_SGT_ADR 0x3c /* len=4 R/W */
#define NJSC32_REG_EXECUTE_PHASE 0x40 /* len=2 RO */
# define NJSC32_XPHASE_COMMAND 0x0001
# define NJSC32_XPHASE_DATA_IN 0x0002
# define NJSC32_XPHASE_DATA_OUT 0x0004
# define NJSC32_XPHASE_MSGOUT 0x0008
# define NJSC32_XPHASE_STATUS 0x0010
# define NJSC32_XPHASE_ILLEGAL 0x0020
# define NJSC32_XPHASE_BUS_FREE 0x0040
# define NJSC32_XPHASE_PAUSED_MSG_IN 0x0080
# define NJSC32_XPHASE_PAUSED_MSG_OUT 0x0100
# define NJSC32_XPHASE_SEL_TIMEOUT 0x0200
# define NJSC32_XPHASE_MSGIN_00 0x0400 /* Command Complete */
# define NJSC32_XPHASE_MSGIN_02 0x0800 /* Save Data Pointer */
# define NJSC32_XPHASE_MSGIN_03 0x1000 /* Restore Pointers */
# define NJSC32_XPHASE_MSGIN_04 0x2000 /* Disconnect */
/* reserved */
# define NJSC32_XPHASE_AUTOSCSI_BUSY 0x8000
#define NJSC32_REG_SCSI_CSB_IN 0x42 /* len=1 RO */
#define NJSC32_REG_SCSI_MSG_OUT 0x44 /* len=4 R/W */
# define NJSC32_MSGOUT_COUNT_MASK 0x00000003
# define NJSC32_MSGOUT_MAX_AUTO 3
# define NJSC32_MSGOUT_VALID 0x00000080
# define NJSC32_MSGOUT_MSG1_SHIFT 8 /* used only if cnt == 3 */
# define NJSC32_MSGOUT_MSG2_SHIFT 16 /* used if cnt == 2 or 3 */
# define NJSC32_MSGOUT_MSG3_SHIFT 24
#define NJSC32_REG_SEL_TIMEOUT 0x48 /* len=2 R/W */
#define NJSC32_REG_SAVED_ACK_CNT 0x4c /* len=4 RO */
#define NJSC32_REG_HTOS_DATA_DELAY 0x50 /* len=1 R/W (UDE) */
# define NJSC32_HTOSDATADELAY_FACTOR 0x07
# define NJSC32_HTOSDATADELAY_DATA_SEL 0x80
#define NJSC32_REG_STOH_DATA_DELAY 0x54 /* len=1 R/W (UDE) */
#define NJSC32_REG_ACK_SUM_CHECK_RD 0x58 /* len=2 RO (UDE) */
#define NJSC32_REG_REQ_SUM_CHECK_RD 0x5c /* len=2 RO (UDE) */
/*
* Indexed registers
*/
#define NJSC32_IREG_CLOCK 0x00 /* len=1 R/W */
# define NJSC32_CLOCK_DIV_2 0x01 /* external 20MHz (FAST SCSI)*/
# define NJSC32_CLOCK_DIV_4 0x02 /* external 40MHz (Ultra SCSI)*/
# define NJSC32_CLOCK_PCICLK 0x80 /* PCI 33.3MHz */
#define NJSC32_IREG_TERM_PWR 0x01 /* len=1 R/W */
# define NJSC32_TERMPWR_BPWR 0x01 /* supply termination power */
# define NJSC32_TERMPWR_SENSE 0x02 /* RO */
#define NJSC32_IREG_EXT_PORT_DDR 0x02 /* len=1 R/W */
#define NJSC32_IREG_EXT_PORT 0x03 /* len=1 R/W */
# define NJSC32_EXTPORT_LED_ON 0x00
# define NJSC32_EXTPORT_LED_OFF 0x01
#define NJSC32_IREG_IRQ_SELECT 0x04 /* len=2 R/W */
# define NJSC32_IRQSEL_RESELECT 0x0001
# define NJSC32_IRQSEL_PHASE_CHANGE 0x0002
# define NJSC32_IRQSEL_SCSIRESET 0x0004
# define NJSC32_IRQSEL_TIMER 0x0008
# define NJSC32_IRQSEL_FIFO_THRESHOLD 0x0010
# define NJSC32_IRQSEL_TARGET_ABORT 0x0020
# define NJSC32_IRQSEL_MASTER_ABORT 0x0040
# define NJSC32_IRQSEL_SERR 0x0080
# define NJSC32_IRQSEL_PERR 0x0100
# define NJSC32_IRQSEL_BMCNTERR 0x0200
# define NJSC32_IRQSEL_AUTO_SCSI_SEQ 0x0400
#define NJSC32_IREG_OLD_SCSI_PHASE 0x05 /* len=1 R/W */
# define NJSC32_OLDSCSI_PHASE_MSG 0x01
# define NJSC32_OLDSCSI_PHASE_IO 0x02
# define NJSC32_OLDSCSI_PHASE_CD 0x04
# define NJSC32_OLDSCSI_PHASE_BUSY 0x08
#define NJSC32_IREG_FIFO_THRESHOLD_FULL 0x06 /* len=1 R/W */
# define NJSC32_FIFO_FULL_PIO_MMIO 0x40
# define NJSC32_FIFO_FULL_BUSMASTER 0x10
#define NJSC32_IREG_FIFO_THRESHOLD_EMPTY 0x07 /* len=1 R/W */
# define NJSC32_FIFO_EMPTY_PIO_MMIO 0x40
# define NJSC32_FIFO_EMPTY_BUSMASTER 0x60
#define NJSC32_IREG_EXP_ROM 0x08 /* len=1 R/W */
# define NJSC32_EXPROM_WRITE_ENB 0x01
# define NJSC32_EXPROM_IO_ACCESS_ENB 0x02
# define NJSC32_EXPROM_ADR_CLEAR 0x04
#define NJSC32_IREG_EXP_ROM_ADR 0x09 /* len=1 R/W */
#define NJSC32_IREG_EXP_ROM_DATA 0x0a /* len=1 R/W */
#define NJSC32_IREG_CHIP_MODE 0x0b /* len=1 RO (Bi only)*/
# define NJSC32_CHIPMODE_OEM_MASK 0x06
# define NJSC32_CHIPMODE_OEM_IODATA 0x00 /* I-O DATA */
# define NJSC32_CHIPMODE_OEM_KME 0x02 /* Kyushu Matsushita Electric */
# define NJSC32_CHIPMODE_OEM_WORKBIT 0x04 /* Workbit */
# define NJSC32_CHIPMODE_OEM_EXTROM 0x06
# define NJSC32_CHIPMODE_OPTB 0x08
# define NJSC32_CHIPMODE_OPTC 0x10
# define NJSC32_CHIPMODE_OPTD 0x20
# define NJSC32_CHIPMODE_OPTE 0x40
# define NJSC32_CHIPMODE_OPTF 0x80
#define NJSC32_IREG_MISC 0x0c /* len=2 R/W */
# define NJSC32_MISC_SCSI_DIRECTION_DETECTOR_SELECT 0x0001
# define NJSC32_MISC_SCSI2HOST_DIRECTION_VALID 0x0002 /* RO */
# define NJSC32_MISC_HOST2SCSI_DIRECTION_VALID 0x0004 /* RO */
# define NJSC32_MISC_DELAYED_BMSTART 0x0008
# define NJSC32_MISC_MASTER_TERMINATION_SELECT 0x0010
# define NJSC32_MISC_BMREQ_NEGATE_TIMING_SEL 0x0020
# define NJSC32_MISC_AUTOSEL_TIMING_SEL 0x0040
# define NJSC32_MISC_MABORT_MASK 0x0080 /* (UDE) */
# define NJSC32_MISC_BMSTOP_CHANGE2_NONDATA_PHASE 0x0100 /* (UDE) */
#define NJSC32_IREG_BM 0x0d /* len=1 R/W */
# define NJSC32_BM_CYCLE0 0x01
# define NJSC32_BM_CYCLE1 0x02
# define NJSC32_BM_FRAME_ASSERT_TIMING 0x04
# define NJSC32_BM_IRDY_ASSERT_TIMING 0x08
# define NJSC32_BM_SINGLE_MASTER 0x10
# define NJSC32_BM_MEMRD_CMD0 0x20
# define NJSC32_BM_SGT_AUTO_PARA_MEMRD_CMD 0x40
# define NJSC32_BM_MEMRD_CMD1 0x80
#define NJSC32_IREG_UP_CNT 0x0f /* len=1 WO */
# define NJSC32_UPCNT_REQCNT 0x01
# define NJSC32_UPCNT_ACKCNT 0x02
# define NJSC32_UPCNT_BMADR 0x10
# define NJSC32_UPCNT_BMCNT 0x20
# define NJSC32_UPCNT_SGTCNT 0x80
#define NJSC32_IREG_CFG_CMD_STR 0x10 /* len=2 RO */
#define NJSC32_IREG_CFG_LATE_CACHE 0x11 /* len=2 R/W */
#define NJSC32_IREG_CFG_BASE_ADR1 0x12 /* len=2 RO */
#define NJSC32_IREG_CFG_BASE_ADR2 0x13 /* len=2 RO */
#define NJSC32_IREG_CFG_INLINE 0x14 /* len=2 RO */
#define NJSC32_IREG_SERIAL_ROM 0x15 /* len=1 R/W (UDE) */
# define NJSC32_SERIALROM_CLOCK 0x01
# define NJSC32_SERIALROM_ENABLE 0x02
# define NJSC32_SERIALROM_DATA 0x04
#define NJSC32_IREG_HST_POINTER 0x16 /* len=1 R/W */
#define NJSC32_IREG_SREQ_DELAY 0x17 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SACK_DELAY 0x18 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SREQ_NOISE_CANCEL 0x19 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SDP_NOISE_CANCEL 0x1a /* len=1 R/W (UDE) */
#define NJSC32_IREG_DELAY_TEST 0x1b /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD0_NOISE_CANCEL 0x20 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD1_NOISE_CANCEL 0x21 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD2_NOISE_CANCEL 0x22 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD3_NOISE_CANCEL 0x23 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD4_NOISE_CANCEL 0x24 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD5_NOISE_CANCEL 0x25 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD6_NOISE_CANCEL 0x26 /* len=1 R/W (UDE) */
#define NJSC32_IREG_SD7_NOISE_CANCEL 0x27 /* len=1 R/W (UDE) */
/*
* DMA data structure
*/
/* scatter/gather transfer table entry (8 bytes) */
struct njsc32_sgtable {
u_int32_t sg_addr; /* transfer address (little endian) */
u_int32_t sg_len; /* transfer length (little endian) */
#define NJSC32_SGT_ENDMARK 0x80000000
#define NJSC32_SGT_MAXSEGLEN 0x10000
};
#define NJSC32_SGT_MAXENTRY 18
/* autoparam (88 bytes) */
#define NJSC32_AUTOPARAM_CDBLEN 16
struct njsc32_autoparam {
struct njsc32_autoparam_cdb {
u_int8_t cdb_data;
u_int8_t cdb_reserved0, cdb_reserved1, cdb_reserved2;
} ap_cdb[NJSC32_AUTOPARAM_CDBLEN]; /* Command Descriptor Block */
u_int32_t ap_msgout; /* msgout buffer (little endian) */
u_int8_t ap_sync; /* NJSC32_REG_SYNC */
u_int8_t ap_ackwidth; /* NJSC32_REG_ACK_WIDTH */
u_int8_t ap_targetid; /* initiator and target id */
u_int8_t ap_sample; /* NJSC32_REG_SREQ_SAMPLING */
u_int16_t ap_cmdctl; /* command control (little endian) */
u_int16_t ap_xferctl; /* transfer control (little endian) */
u_int32_t ap_sgtdmaaddr; /* SG table addr (little endian) */
u_int32_t ap_pad[2];
};
/*
* device specific constants
*/
#define NJSC32_NTARGET 8 /* Narrow SCSI */
#define NJSC32_NLU 8
#define NJSC32_INITIATOR_ID 7 /* fixed value? */
#define NJSC32_MAX_TARGET_ID 6 /* 0..6 */
#endif /* _NJSC32REG_H_ */