1227 lines
34 KiB
C
1227 lines
34 KiB
C
/* $NetBSD: isp_target.c,v 1.26 2003/12/04 13:57:30 keihan Exp $ */
|
|
/*
|
|
* This driver, which is contained in NetBSD in the files:
|
|
*
|
|
* sys/dev/ic/isp.c
|
|
* sys/dev/ic/isp_inline.h
|
|
* sys/dev/ic/isp_netbsd.c
|
|
* sys/dev/ic/isp_netbsd.h
|
|
* sys/dev/ic/isp_target.c
|
|
* sys/dev/ic/isp_target.h
|
|
* sys/dev/ic/isp_tpublic.h
|
|
* sys/dev/ic/ispmbox.h
|
|
* sys/dev/ic/ispreg.h
|
|
* sys/dev/ic/ispvar.h
|
|
* sys/microcode/isp/asm_sbus.h
|
|
* sys/microcode/isp/asm_1040.h
|
|
* sys/microcode/isp/asm_1080.h
|
|
* sys/microcode/isp/asm_12160.h
|
|
* sys/microcode/isp/asm_2100.h
|
|
* sys/microcode/isp/asm_2200.h
|
|
* sys/pci/isp_pci.c
|
|
* sys/sbus/isp_sbus.c
|
|
*
|
|
* Is being actively maintained by Matthew Jacob (mjacob@NetBSD.org).
|
|
* This driver also is shared source with FreeBSD, OpenBSD, Linux, Solaris,
|
|
* Linux versions. This tends to be an interesting maintenance problem.
|
|
*
|
|
* Please coordinate with Matthew Jacob on changes you wish to make here.
|
|
*/
|
|
/*
|
|
* Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters.
|
|
*
|
|
* Copyright (c) 1999, 2000, 2001 by Matthew Jacob
|
|
* All rights reserved.
|
|
* mjacob@feral.com
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Bug fixes gratefully acknowledged from:
|
|
* Oded Kedem <oded@kashya.com>
|
|
*/
|
|
/*
|
|
* Include header file appropriate for platform we're building on.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: isp_target.c,v 1.26 2003/12/04 13:57:30 keihan Exp $");
|
|
|
|
#ifdef __NetBSD__
|
|
#include <dev/ic/isp_netbsd.h>
|
|
#endif
|
|
#ifdef __FreeBSD__
|
|
#include <dev/isp/isp_freebsd.h>
|
|
#endif
|
|
#ifdef __OpenBSD__
|
|
#include <dev/ic/isp_openbsd.h>
|
|
#endif
|
|
#ifdef __linux__
|
|
#include "isp_linux.h"
|
|
#endif
|
|
|
|
#ifdef ISP_TARGET_MODE
|
|
static const char atiocope[] =
|
|
"ATIO returned for lun %d because it was in the middle of Bus Device Reset "
|
|
"on bus %d";
|
|
static const char atior[] =
|
|
"ATIO returned on for lun %d on from IID %d because a Bus Reset occurred "
|
|
"on bus %d";
|
|
|
|
static void isp_got_msg(struct ispsoftc *, int, in_entry_t *);
|
|
static void isp_got_msg_fc(struct ispsoftc *, int, in_fcentry_t *);
|
|
static void isp_notify_ack(struct ispsoftc *, void *);
|
|
static void isp_handle_atio(struct ispsoftc *, at_entry_t *);
|
|
static void isp_handle_atio2(struct ispsoftc *, at2_entry_t *);
|
|
static void isp_handle_ctio(struct ispsoftc *, ct_entry_t *);
|
|
static void isp_handle_ctio2(struct ispsoftc *, ct2_entry_t *);
|
|
|
|
/*
|
|
* The Qlogic driver gets an interrupt to look at response queue entries.
|
|
* Some of these are status completions for initiatior mode commands, but
|
|
* if target mode is enabled, we get a whole wad of response queue entries
|
|
* to be handled here.
|
|
*
|
|
* Basically the split into 3 main groups: Lun Enable/Modification responses,
|
|
* SCSI Command processing, and Immediate Notification events.
|
|
*
|
|
* You start by writing a request queue entry to enable target mode (and
|
|
* establish some resource limitations which you can modify later).
|
|
* The f/w responds with a LUN ENABLE or LUN MODIFY response with
|
|
* the status of this action. If the enable was successful, you can expect...
|
|
*
|
|
* Response queue entries with SCSI commands encapsulate show up in an ATIO
|
|
* (Accept Target IO) type- sometimes with enough info to stop the command at
|
|
* this level. Ultimately the driver has to feed back to the f/w's request
|
|
* queue a sequence of CTIOs (continue target I/O) that describe data to
|
|
* be moved and/or status to be sent) and finally finishing with sending
|
|
* to the f/w's response queue an ATIO which then completes the handshake
|
|
* with the f/w for that command. There's a lot of variations on this theme,
|
|
* including flags you can set in the CTIO for the Qlogic 2X00 fibre channel
|
|
* cards that 'auto-replenish' the f/w's ATIO count, but this is the basic
|
|
* gist of it.
|
|
*
|
|
* The third group that can show up in the response queue are Immediate
|
|
* Notification events. These include things like notifications of SCSI bus
|
|
* resets, or Bus Device Reset messages or other messages received. This
|
|
* a classic oddbins area. It can get a little weird because you then turn
|
|
* around and acknowledge the Immediate Notify by writing an entry onto the
|
|
* request queue and then the f/w turns around and gives you an acknowledgement
|
|
* to *your* acknowledgement on the response queue (the idea being to let
|
|
* the f/w tell you when the event is *really* over I guess).
|
|
*
|
|
*/
|
|
|
|
|
|
/*
|
|
* A new response queue entry has arrived. The interrupt service code
|
|
* has already swizzled it into the platform dependent from canonical form.
|
|
*
|
|
* Because of the way this driver is designed, unfortunately most of the
|
|
* actual synchronization work has to be done in the platform specific
|
|
* code- we have no synchroniation primitives in the common code.
|
|
*/
|
|
|
|
int
|
|
isp_target_notify(struct ispsoftc *isp, void *vptr, u_int16_t *optrp)
|
|
{
|
|
u_int16_t status, seqid;
|
|
union {
|
|
at_entry_t *atiop;
|
|
at2_entry_t *at2iop;
|
|
ct_entry_t *ctiop;
|
|
ct2_entry_t *ct2iop;
|
|
lun_entry_t *lunenp;
|
|
in_entry_t *inotp;
|
|
in_fcentry_t *inot_fcp;
|
|
na_entry_t *nackp;
|
|
na_fcentry_t *nack_fcp;
|
|
isphdr_t *hp;
|
|
void * *vp;
|
|
#define atiop unp.atiop
|
|
#define at2iop unp.at2iop
|
|
#define ctiop unp.ctiop
|
|
#define ct2iop unp.ct2iop
|
|
#define lunenp unp.lunenp
|
|
#define inotp unp.inotp
|
|
#define inot_fcp unp.inot_fcp
|
|
#define nackp unp.nackp
|
|
#define nack_fcp unp.nack_fcp
|
|
#define hdrp unp.hp
|
|
} unp;
|
|
u_int8_t local[QENTRY_LEN];
|
|
int bus, type, rval = 1;
|
|
|
|
type = isp_get_response_type(isp, (isphdr_t *)vptr);
|
|
unp.vp = vptr;
|
|
|
|
ISP_TDQE(isp, "isp_target_notify", (int) *optrp, vptr);
|
|
|
|
switch(type) {
|
|
case RQSTYPE_ATIO:
|
|
isp_get_atio(isp, atiop, (at_entry_t *) local);
|
|
isp_handle_atio(isp, (at_entry_t *) local);
|
|
break;
|
|
case RQSTYPE_CTIO:
|
|
isp_get_ctio(isp, ctiop, (ct_entry_t *) local);
|
|
isp_handle_ctio(isp, (ct_entry_t *) local);
|
|
break;
|
|
case RQSTYPE_ATIO2:
|
|
isp_get_atio2(isp, at2iop, (at2_entry_t *) local);
|
|
isp_handle_atio2(isp, (at2_entry_t *) local);
|
|
break;
|
|
case RQSTYPE_CTIO2:
|
|
isp_get_ctio2(isp, ct2iop, (ct2_entry_t *) local);
|
|
isp_handle_ctio2(isp, (ct2_entry_t *) local);
|
|
break;
|
|
case RQSTYPE_ENABLE_LUN:
|
|
case RQSTYPE_MODIFY_LUN:
|
|
isp_get_enable_lun(isp, lunenp, (lun_entry_t *) local);
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, local);
|
|
break;
|
|
|
|
case RQSTYPE_NOTIFY:
|
|
/*
|
|
* Either the ISP received a SCSI message it can't
|
|
* handle, or it's returning an Immed. Notify entry
|
|
* we sent. We can send Immed. Notify entries to
|
|
* increment the firmware's resource count for them
|
|
* (we set this initially in the Enable Lun entry).
|
|
*/
|
|
bus = 0;
|
|
if (IS_FC(isp)) {
|
|
isp_get_notify_fc(isp, inot_fcp, (in_fcentry_t *)local);
|
|
inot_fcp = (in_fcentry_t *) local;
|
|
status = inot_fcp->in_status;
|
|
seqid = inot_fcp->in_seqid;
|
|
} else {
|
|
isp_get_notify(isp, inotp, (in_entry_t *)local);
|
|
inotp = (in_entry_t *) local;
|
|
status = inotp->in_status & 0xff;
|
|
seqid = inotp->in_seqid;
|
|
if (IS_DUALBUS(isp)) {
|
|
bus = GET_BUS_VAL(inotp->in_iid);
|
|
SET_BUS_VAL(inotp->in_iid, 0);
|
|
}
|
|
}
|
|
isp_prt(isp, ISP_LOGTDEBUG0,
|
|
"Immediate Notify On Bus %d, status=0x%x seqid=0x%x",
|
|
bus, status, seqid);
|
|
|
|
/*
|
|
* ACK it right away.
|
|
*/
|
|
isp_notify_ack(isp, (status == IN_RESET)? NULL : local);
|
|
switch (status) {
|
|
case IN_RESET:
|
|
(void) isp_async(isp, ISPASYNC_BUS_RESET, &bus);
|
|
break;
|
|
case IN_MSG_RECEIVED:
|
|
case IN_IDE_RECEIVED:
|
|
if (IS_FC(isp)) {
|
|
isp_got_msg_fc(isp, bus, (in_fcentry_t *)local);
|
|
} else {
|
|
isp_got_msg(isp, bus, (in_entry_t *)local);
|
|
}
|
|
break;
|
|
case IN_RSRC_UNAVAIL:
|
|
isp_prt(isp, ISP_LOGWARN, "Firmware out of ATIOs");
|
|
break;
|
|
case IN_PORT_LOGOUT:
|
|
case IN_ABORT_TASK:
|
|
case IN_PORT_CHANGED:
|
|
case IN_GLOBAL_LOGO:
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, &local);
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"bad status (0x%x) in isp_target_notify", status);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case RQSTYPE_NOTIFY_ACK:
|
|
/*
|
|
* The ISP is acknowledging our acknowledgement of an
|
|
* Immediate Notify entry for some asynchronous event.
|
|
*/
|
|
if (IS_FC(isp)) {
|
|
isp_get_notify_ack_fc(isp, nack_fcp,
|
|
(na_fcentry_t *)local);
|
|
nack_fcp = (na_fcentry_t *)local;
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"Notify Ack status=0x%x seqid 0x%x",
|
|
nack_fcp->na_status, nack_fcp->na_seqid);
|
|
} else {
|
|
isp_get_notify_ack(isp, nackp, (na_entry_t *)local);
|
|
nackp = (na_entry_t *)local;
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
"Notify Ack event 0x%x status=0x%x seqid 0x%x",
|
|
nackp->na_event, nackp->na_status, nackp->na_seqid);
|
|
}
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Unknown entry type 0x%x in isp_target_notify", type);
|
|
rval = 0;
|
|
break;
|
|
}
|
|
#undef atiop
|
|
#undef at2iop
|
|
#undef ctiop
|
|
#undef ct2iop
|
|
#undef lunenp
|
|
#undef inotp
|
|
#undef inot_fcp
|
|
#undef nackp
|
|
#undef nack_fcp
|
|
#undef hdrp
|
|
return (rval);
|
|
}
|
|
|
|
|
|
/*
|
|
* Toggle (on/off) target mode for bus/target/lun
|
|
*
|
|
* The caller has checked for overlap and legality.
|
|
*
|
|
* Note that not all of bus, target or lun can be paid attention to.
|
|
* Note also that this action will not be complete until the f/w writes
|
|
* response entry. The caller is responsible for synchronizing this.
|
|
*/
|
|
int
|
|
isp_lun_cmd(struct ispsoftc *isp, int cmd, int bus, int tgt, int lun,
|
|
int cmd_cnt, int inot_cnt, u_int32_t opaque)
|
|
{
|
|
lun_entry_t el;
|
|
u_int16_t nxti, optr;
|
|
void *outp;
|
|
|
|
|
|
MEMZERO(&el, sizeof (el));
|
|
if (IS_DUALBUS(isp)) {
|
|
el.le_rsvd = (bus & 0x1) << 7;
|
|
}
|
|
el.le_cmd_count = cmd_cnt;
|
|
el.le_in_count = inot_cnt;
|
|
if (cmd == RQSTYPE_ENABLE_LUN) {
|
|
if (IS_SCSI(isp)) {
|
|
el.le_flags = LUN_TQAE|LUN_DISAD;
|
|
el.le_cdb6len = 12;
|
|
el.le_cdb7len = 12;
|
|
}
|
|
} else if (cmd == -RQSTYPE_ENABLE_LUN) {
|
|
cmd = RQSTYPE_ENABLE_LUN;
|
|
el.le_cmd_count = 0;
|
|
el.le_in_count = 0;
|
|
} else if (cmd == -RQSTYPE_MODIFY_LUN) {
|
|
cmd = RQSTYPE_MODIFY_LUN;
|
|
el.le_ops = LUN_CCDECR | LUN_INDECR;
|
|
} else {
|
|
el.le_ops = LUN_CCINCR | LUN_ININCR;
|
|
}
|
|
el.le_header.rqs_entry_type = cmd;
|
|
el.le_header.rqs_entry_count = 1;
|
|
el.le_reserved = opaque;
|
|
if (IS_SCSI(isp)) {
|
|
el.le_tgt = tgt;
|
|
el.le_lun = lun;
|
|
} else if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
|
|
el.le_lun = lun;
|
|
}
|
|
el.le_timeout = 2;
|
|
|
|
if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Request Queue Overflow in isp_lun_cmd");
|
|
return (-1);
|
|
}
|
|
ISP_TDQE(isp, "isp_lun_cmd", (int) optr, &el);
|
|
isp_put_enable_lun(isp, &el, outp);
|
|
ISP_ADD_REQUEST(isp, nxti);
|
|
return (0);
|
|
}
|
|
|
|
|
|
int
|
|
isp_target_put_entry(struct ispsoftc *isp, void *ap)
|
|
{
|
|
void *outp;
|
|
u_int16_t nxti, optr;
|
|
u_int8_t etype = ((isphdr_t *) ap)->rqs_entry_type;
|
|
|
|
if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
|
|
isp_prt(isp, ISP_LOGWARN,
|
|
"Request Queue Overflow in isp_target_put_entry");
|
|
return (-1);
|
|
}
|
|
switch (etype) {
|
|
case RQSTYPE_ATIO:
|
|
isp_put_atio(isp, (at_entry_t *) ap, (at_entry_t *) outp);
|
|
break;
|
|
case RQSTYPE_ATIO2:
|
|
isp_put_atio2(isp, (at2_entry_t *) ap, (at2_entry_t *) outp);
|
|
break;
|
|
case RQSTYPE_CTIO:
|
|
isp_put_ctio(isp, (ct_entry_t *) ap, (ct_entry_t *) outp);
|
|
break;
|
|
case RQSTYPE_CTIO2:
|
|
isp_put_ctio2(isp, (ct2_entry_t *) ap, (ct2_entry_t *) outp);
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Unknown type 0x%x in isp_put_entry", etype);
|
|
return (-1);
|
|
}
|
|
|
|
ISP_TDQE(isp, "isp_target_put_entry", (int) optr, ap);
|
|
ISP_ADD_REQUEST(isp, nxti);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
isp_target_put_atio(struct ispsoftc *isp, void *arg)
|
|
{
|
|
union {
|
|
at_entry_t _atio;
|
|
at2_entry_t _atio2;
|
|
} atun;
|
|
|
|
MEMZERO(&atun, sizeof atun);
|
|
if (IS_FC(isp)) {
|
|
at2_entry_t *aep = arg;
|
|
atun._atio2.at_header.rqs_entry_type = RQSTYPE_ATIO2;
|
|
atun._atio2.at_header.rqs_entry_count = 1;
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
|
atun._atio2.at_scclun = (u_int16_t) aep->at_scclun;
|
|
} else {
|
|
atun._atio2.at_lun = (u_int8_t) aep->at_lun;
|
|
}
|
|
atun._atio2.at_iid = aep->at_iid;
|
|
atun._atio2.at_rxid = aep->at_rxid;
|
|
atun._atio2.at_status = CT_OK;
|
|
} else {
|
|
at_entry_t *aep = arg;
|
|
atun._atio.at_header.rqs_entry_type = RQSTYPE_ATIO;
|
|
atun._atio.at_header.rqs_entry_count = 1;
|
|
atun._atio.at_handle = aep->at_handle;
|
|
atun._atio.at_iid = aep->at_iid;
|
|
atun._atio.at_tgt = aep->at_tgt;
|
|
atun._atio.at_lun = aep->at_lun;
|
|
atun._atio.at_tag_type = aep->at_tag_type;
|
|
atun._atio.at_tag_val = aep->at_tag_val;
|
|
atun._atio.at_status = (aep->at_flags & AT_TQAE);
|
|
atun._atio.at_status |= CT_OK;
|
|
}
|
|
return (isp_target_put_entry(isp, &atun));
|
|
}
|
|
|
|
/*
|
|
* Command completion- both for handling cases of no resources or
|
|
* no blackhole driver, or other cases where we have to, inline,
|
|
* finish the command sanely, or for normal command completion.
|
|
*
|
|
* The 'completion' code value has the scsi status byte in the low 8 bits.
|
|
* If status is a CHECK CONDITION and bit 8 is nonzero, then bits 12..15 have
|
|
* the sense key and bits 16..23 have the ASCQ and bits 24..31 have the ASC
|
|
* values.
|
|
*
|
|
* NB: the key, asc, ascq, cannot be used for parallel SCSI as it doesn't
|
|
* NB: inline SCSI sense reporting. As such, we lose this information. XXX.
|
|
*
|
|
* For both parallel && fibre channel, we use the feature that does
|
|
* an automatic resource autoreplenish so we don't have then later do
|
|
* put of an atio to replenish the f/w's resource count.
|
|
*/
|
|
|
|
int
|
|
isp_endcmd(struct ispsoftc *isp, void *arg, u_int32_t code, u_int16_t hdl)
|
|
{
|
|
int sts;
|
|
union {
|
|
ct_entry_t _ctio;
|
|
ct2_entry_t _ctio2;
|
|
} un;
|
|
|
|
MEMZERO(&un, sizeof un);
|
|
sts = code & 0xff;
|
|
|
|
if (IS_FC(isp)) {
|
|
at2_entry_t *aep = arg;
|
|
ct2_entry_t *cto = &un._ctio2;
|
|
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
cto->ct_iid = aep->at_iid;
|
|
if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
|
|
cto->ct_lun = aep->at_lun;
|
|
}
|
|
cto->ct_rxid = aep->at_rxid;
|
|
cto->rsp.m1.ct_scsi_status = sts & 0xff;
|
|
cto->ct_flags = CT2_SENDSTATUS | CT2_NO_DATA | CT2_FLAG_MODE1;
|
|
if (hdl == 0) {
|
|
cto->ct_flags |= CT2_CCINCR;
|
|
}
|
|
if (aep->at_datalen) {
|
|
cto->ct_resid = aep->at_datalen;
|
|
cto->rsp.m1.ct_scsi_status |= CT2_DATA_UNDER;
|
|
}
|
|
if ((sts & 0xff) == SCSI_CHECK && (sts & ECMD_SVALID)) {
|
|
cto->rsp.m1.ct_resp[0] = 0xf0;
|
|
cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf;
|
|
cto->rsp.m1.ct_resp[7] = 8;
|
|
cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff;
|
|
cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff;
|
|
cto->rsp.m1.ct_senselen = 16;
|
|
cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
|
|
}
|
|
cto->ct_syshandle = hdl;
|
|
} else {
|
|
at_entry_t *aep = arg;
|
|
ct_entry_t *cto = &un._ctio;
|
|
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
|
|
cto->ct_header.rqs_entry_count = 1;
|
|
cto->ct_fwhandle = aep->at_handle;
|
|
cto->ct_iid = aep->at_iid;
|
|
cto->ct_tgt = aep->at_tgt;
|
|
cto->ct_lun = aep->at_lun;
|
|
cto->ct_tag_type = aep->at_tag_type;
|
|
cto->ct_tag_val = aep->at_tag_val;
|
|
if (aep->at_flags & AT_TQAE) {
|
|
cto->ct_flags |= CT_TQAE;
|
|
}
|
|
cto->ct_flags = CT_SENDSTATUS | CT_NO_DATA;
|
|
if (hdl == 0) {
|
|
cto->ct_flags |= CT_CCINCR;
|
|
}
|
|
cto->ct_scsi_status = sts;
|
|
cto->ct_syshandle = hdl;
|
|
}
|
|
return (isp_target_put_entry(isp, &un));
|
|
}
|
|
|
|
int
|
|
isp_target_async(struct ispsoftc *isp, int bus, int event)
|
|
{
|
|
tmd_event_t evt;
|
|
tmd_msg_t msg;
|
|
|
|
switch (event) {
|
|
/*
|
|
* These three we handle here to propagate an effective bus reset
|
|
* upstream, but these do not require any immediate notify actions
|
|
* so we return when done.
|
|
*/
|
|
case ASYNC_LIP_F8:
|
|
case ASYNC_LIP_OCCURRED:
|
|
case ASYNC_LOOP_UP:
|
|
case ASYNC_LOOP_DOWN:
|
|
case ASYNC_LOOP_RESET:
|
|
case ASYNC_PTPMODE:
|
|
/*
|
|
* These don't require any immediate notify actions. We used
|
|
* treat them like SCSI Bus Resets, but that was just plain
|
|
* wrong. Let the normal CTIO completion report what occurred.
|
|
*/
|
|
return (0);
|
|
|
|
case ASYNC_BUS_RESET:
|
|
case ASYNC_TIMEOUT_RESET:
|
|
if (IS_FC(isp)) {
|
|
return (0); /* we'll be getting an inotify instead */
|
|
}
|
|
evt.ev_bus = bus;
|
|
evt.ev_event = event;
|
|
(void) isp_async(isp, ISPASYNC_TARGET_EVENT, &evt);
|
|
break;
|
|
case ASYNC_DEVICE_RESET:
|
|
/*
|
|
* Bus Device Reset resets a specific target, so
|
|
* we pass this as a synthesized message.
|
|
*/
|
|
MEMZERO(&msg, sizeof msg);
|
|
if (IS_FC(isp)) {
|
|
msg.nt_iid = FCPARAM(isp)->isp_loopid;
|
|
} else {
|
|
msg.nt_iid = SDPARAM(isp)->isp_initiator_id;
|
|
}
|
|
msg.nt_bus = bus;
|
|
msg.nt_msg[0] = MSG_BUS_DEV_RESET;
|
|
(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
|
|
break;
|
|
case ASYNC_CTIO_DONE:
|
|
evt.ev_bus = bus;
|
|
evt.ev_event = event;
|
|
(void) isp_async(isp, ISPASYNC_TARGET_EVENT, &evt);
|
|
return (0);
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"isp_target_async: unknown event 0x%x", event);
|
|
break;
|
|
}
|
|
if (isp->isp_state == ISP_RUNSTATE)
|
|
isp_notify_ack(isp, NULL);
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Process a received message.
|
|
* The ISP firmware can handle most messages, there are only
|
|
* a few that we need to deal with:
|
|
* - abort: clean up the current command
|
|
* - abort tag and clear queue
|
|
*/
|
|
|
|
static void
|
|
isp_got_msg(struct ispsoftc *isp, int bus, in_entry_t *inp)
|
|
{
|
|
u_int8_t status = inp->in_status & ~QLTM_SVALID;
|
|
|
|
if (status == IN_IDE_RECEIVED || status == IN_MSG_RECEIVED) {
|
|
tmd_msg_t msg;
|
|
|
|
MEMZERO(&msg, sizeof (msg));
|
|
msg.nt_bus = bus;
|
|
msg.nt_iid = inp->in_iid;
|
|
msg.nt_tgt = inp->in_tgt;
|
|
msg.nt_lun = inp->in_lun;
|
|
msg.nt_tagtype = inp->in_tag_type;
|
|
msg.nt_tagval = inp->in_tag_val;
|
|
MEMCPY(msg.nt_msg, inp->in_msg, IN_MSGLEN);
|
|
(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
|
|
} else {
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"unknown immediate notify status 0x%x", inp->in_status);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Synthesize a message from the task management flags in a FCP_CMND_IU.
|
|
*/
|
|
static void
|
|
isp_got_msg_fc(struct ispsoftc *isp, int bus, in_fcentry_t *inp)
|
|
{
|
|
int lun;
|
|
static const char f1[] = "%s from iid %d lun %d seq 0x%x";
|
|
static const char f2[] =
|
|
"unknown %s 0x%x lun %d iid %d task flags 0x%x seq 0x%x\n";
|
|
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
|
lun = inp->in_scclun;
|
|
} else {
|
|
lun = inp->in_lun;
|
|
}
|
|
|
|
if (inp->in_status != IN_MSG_RECEIVED) {
|
|
isp_prt(isp, ISP_LOGINFO, f2, "immediate notify status",
|
|
inp->in_status, lun, inp->in_iid,
|
|
inp->in_task_flags, inp->in_seqid);
|
|
} else {
|
|
tmd_msg_t msg;
|
|
|
|
MEMZERO(&msg, sizeof (msg));
|
|
msg.nt_bus = bus;
|
|
msg.nt_iid = inp->in_iid;
|
|
msg.nt_tagval = inp->in_seqid;
|
|
msg.nt_lun = lun;
|
|
|
|
if (inp->in_task_flags & TASK_FLAGS_ABORT_TASK) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "ABORT TASK",
|
|
inp->in_iid, lun, inp->in_seqid);
|
|
msg.nt_msg[0] = MSG_ABORT_TAG;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_TASK_SET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR TASK SET",
|
|
inp->in_iid, lun, inp->in_seqid);
|
|
msg.nt_msg[0] = MSG_CLEAR_QUEUE;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_TARGET_RESET) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "TARGET RESET",
|
|
inp->in_iid, lun, inp->in_seqid);
|
|
msg.nt_msg[0] = MSG_BUS_DEV_RESET;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_ACA) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR ACA",
|
|
inp->in_iid, lun, inp->in_seqid);
|
|
/* ???? */
|
|
msg.nt_msg[0] = MSG_REL_RECOVERY;
|
|
} else if (inp->in_task_flags & TASK_FLAGS_TERMINATE_TASK) {
|
|
isp_prt(isp, ISP_LOGINFO, f1, "TERMINATE TASK",
|
|
inp->in_iid, lun, inp->in_seqid);
|
|
msg.nt_msg[0] = MSG_TERM_IO_PROC;
|
|
} else {
|
|
isp_prt(isp, ISP_LOGWARN, f2, "task flag",
|
|
inp->in_status, lun, inp->in_iid,
|
|
inp->in_task_flags, inp->in_seqid);
|
|
}
|
|
if (msg.nt_msg[0]) {
|
|
(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_notify_ack(struct ispsoftc *isp, void *arg)
|
|
{
|
|
char storage[QENTRY_LEN];
|
|
u_int16_t nxti, optr;
|
|
void *outp;
|
|
|
|
if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
|
|
isp_prt(isp, ISP_LOGWARN,
|
|
"Request Queue Overflow For isp_notify_ack");
|
|
return;
|
|
}
|
|
|
|
MEMZERO(storage, QENTRY_LEN);
|
|
|
|
if (IS_FC(isp)) {
|
|
na_fcentry_t *na = (na_fcentry_t *) storage;
|
|
if (arg) {
|
|
in_fcentry_t *inp = arg;
|
|
MEMCPY(storage, arg, sizeof (isphdr_t));
|
|
na->na_iid = inp->in_iid;
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
|
na->na_lun = inp->in_scclun;
|
|
} else {
|
|
na->na_lun = inp->in_lun;
|
|
}
|
|
na->na_task_flags = inp->in_task_flags;
|
|
na->na_seqid = inp->in_seqid;
|
|
na->na_flags = NAFC_RCOUNT;
|
|
na->na_status = inp->in_status;
|
|
if (inp->in_status == IN_RESET) {
|
|
na->na_flags |= NAFC_RST_CLRD;
|
|
}
|
|
} else {
|
|
na->na_flags = NAFC_RST_CLRD;
|
|
}
|
|
na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
|
|
na->na_header.rqs_entry_count = 1;
|
|
isp_put_notify_ack_fc(isp, na, (na_fcentry_t *)outp);
|
|
} else {
|
|
na_entry_t *na = (na_entry_t *) storage;
|
|
if (arg) {
|
|
in_entry_t *inp = arg;
|
|
MEMCPY(storage, arg, sizeof (isphdr_t));
|
|
na->na_iid = inp->in_iid;
|
|
na->na_lun = inp->in_lun;
|
|
na->na_tgt = inp->in_tgt;
|
|
na->na_seqid = inp->in_seqid;
|
|
if (inp->in_status == IN_RESET) {
|
|
na->na_event = NA_RST_CLRD;
|
|
}
|
|
} else {
|
|
na->na_event = NA_RST_CLRD;
|
|
}
|
|
na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
|
|
na->na_header.rqs_entry_count = 1;
|
|
isp_put_notify_ack(isp, na, (na_entry_t *)outp);
|
|
}
|
|
ISP_TDQE(isp, "isp_notify_ack", (int) optr, storage);
|
|
ISP_ADD_REQUEST(isp, nxti);
|
|
}
|
|
|
|
static void
|
|
isp_handle_atio(struct ispsoftc *isp, at_entry_t *aep)
|
|
{
|
|
int lun;
|
|
lun = aep->at_lun;
|
|
/*
|
|
* The firmware status (except for the QLTM_SVALID bit) indicates
|
|
* why this ATIO was sent to us.
|
|
*
|
|
* If QLTM_SVALID is set, the firmware has recommended Sense Data.
|
|
*
|
|
* If the DISCONNECTS DISABLED bit is set in the flags field,
|
|
* we're still connected on the SCSI bus - i.e. the initiator
|
|
* did not set DiscPriv in the identify message. We don't care
|
|
* about this so it's ignored.
|
|
*/
|
|
|
|
switch(aep->at_status & ~QLTM_SVALID) {
|
|
case AT_PATH_INVALID:
|
|
/*
|
|
* ATIO rejected by the firmware due to disabled lun.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"rejected ATIO for disabled lun %d", lun);
|
|
break;
|
|
case AT_NOCAP:
|
|
/*
|
|
* Requested Capability not available
|
|
* We sent an ATIO that overflowed the firmware's
|
|
* command resource count.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"rejected ATIO for lun %d because of command count"
|
|
" overflow", lun);
|
|
break;
|
|
|
|
case AT_BDR_MSG:
|
|
/*
|
|
* If we send an ATIO to the firmware to increment
|
|
* its command resource count, and the firmware is
|
|
* recovering from a Bus Device Reset, it returns
|
|
* the ATIO with this status. We set the command
|
|
* resource count in the Enable Lun entry and do
|
|
* not increment it. Therefore we should never get
|
|
* this status here.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, atiocope, lun,
|
|
GET_BUS_VAL(aep->at_iid));
|
|
break;
|
|
|
|
case AT_CDB: /* Got a CDB */
|
|
case AT_PHASE_ERROR: /* Bus Phase Sequence Error */
|
|
/*
|
|
* Punt to platform specific layer.
|
|
*/
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
|
|
break;
|
|
|
|
case AT_RESET:
|
|
/*
|
|
* A bus reset came along and blew away this command. Why
|
|
* they do this in addition the async event code stuff,
|
|
* I dunno.
|
|
*
|
|
* Ignore it because the async event will clear things
|
|
* up for us.
|
|
*/
|
|
isp_prt(isp, ISP_LOGWARN, atior, lun,
|
|
GET_IID_VAL(aep->at_iid), GET_BUS_VAL(aep->at_iid));
|
|
break;
|
|
|
|
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Unknown ATIO status 0x%x from initiator %d for lun %d",
|
|
aep->at_status, aep->at_iid, lun);
|
|
(void) isp_target_put_atio(isp, aep);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_atio2(struct ispsoftc *isp, at2_entry_t *aep)
|
|
{
|
|
int lun;
|
|
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
|
lun = aep->at_scclun;
|
|
} else {
|
|
lun = aep->at_lun;
|
|
}
|
|
|
|
/*
|
|
* The firmware status (except for the QLTM_SVALID bit) indicates
|
|
* why this ATIO was sent to us.
|
|
*
|
|
* If QLTM_SVALID is set, the firmware has recommended Sense Data.
|
|
*
|
|
* If the DISCONNECTS DISABLED bit is set in the flags field,
|
|
* we're still connected on the SCSI bus - i.e. the initiator
|
|
* did not set DiscPriv in the identify message. We don't care
|
|
* about this so it's ignored.
|
|
*/
|
|
|
|
switch(aep->at_status & ~QLTM_SVALID) {
|
|
case AT_PATH_INVALID:
|
|
/*
|
|
* ATIO rejected by the firmware due to disabled lun.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"rejected ATIO2 for disabled lun %d", lun);
|
|
break;
|
|
case AT_NOCAP:
|
|
/*
|
|
* Requested Capability not available
|
|
* We sent an ATIO that overflowed the firmware's
|
|
* command resource count.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"rejected ATIO2 for lun %d- command count overflow", lun);
|
|
break;
|
|
|
|
case AT_BDR_MSG:
|
|
/*
|
|
* If we send an ATIO to the firmware to increment
|
|
* its command resource count, and the firmware is
|
|
* recovering from a Bus Device Reset, it returns
|
|
* the ATIO with this status. We set the command
|
|
* resource count in the Enable Lun entry and no
|
|
* not increment it. Therefore we should never get
|
|
* this status here.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, atiocope, lun, 0);
|
|
break;
|
|
|
|
case AT_CDB: /* Got a CDB */
|
|
/*
|
|
* Punt to platform specific layer.
|
|
*/
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
|
|
break;
|
|
|
|
case AT_RESET:
|
|
/*
|
|
* A bus reset came along an blew away this command. Why
|
|
* they do this in addition the async event code stuff,
|
|
* I dunno.
|
|
*
|
|
* Ignore it because the async event will clear things
|
|
* up for us.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, atior, lun, aep->at_iid, 0);
|
|
break;
|
|
|
|
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Unknown ATIO2 status 0x%x from initiator %d for lun %d",
|
|
aep->at_status, aep->at_iid, lun);
|
|
(void) isp_target_put_atio(isp, aep);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_ctio(struct ispsoftc *isp, ct_entry_t *ct)
|
|
{
|
|
void *xs;
|
|
int pl = ISP_LOGTDEBUG2;
|
|
char *fmsg = NULL;
|
|
|
|
if (ct->ct_syshandle) {
|
|
xs = isp_find_xs(isp, ct->ct_syshandle);
|
|
if (xs == NULL)
|
|
pl = ISP_LOGALL;
|
|
} else {
|
|
xs = NULL;
|
|
}
|
|
|
|
switch(ct->ct_status & ~QLTM_SVALID) {
|
|
case CT_OK:
|
|
/*
|
|
* There are generally 3 possibilities as to why we'd get
|
|
* this condition:
|
|
* We disconnected after receiving a CDB.
|
|
* We sent or received data.
|
|
* We sent status & command complete.
|
|
*/
|
|
|
|
if (ct->ct_flags & CT_SENDSTATUS) {
|
|
break;
|
|
} else if ((ct->ct_flags & CT_DATAMASK) == CT_NO_DATA) {
|
|
/*
|
|
* Nothing to do in this case.
|
|
*/
|
|
isp_prt(isp, pl, "CTIO- iid %d disconnected OK",
|
|
ct->ct_iid);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case CT_BDR_MSG:
|
|
/*
|
|
* Bus Device Reset message received or the SCSI Bus has
|
|
* been Reset; the firmware has gone to Bus Free.
|
|
*
|
|
* The firmware generates an async mailbox interrupt to
|
|
* notify us of this and returns outstanding CTIOs with this
|
|
* status. These CTIOs are handled in that same way as
|
|
* CT_ABORTED ones, so just fall through here.
|
|
*/
|
|
fmsg = "Bus Device Reset";
|
|
/*FALLTHROUGH*/
|
|
case CT_RESET:
|
|
if (fmsg == NULL)
|
|
fmsg = "Bus Reset";
|
|
/*FALLTHROUGH*/
|
|
case CT_ABORTED:
|
|
/*
|
|
* When an Abort message is received the firmware goes to
|
|
* Bus Free and returns all outstanding CTIOs with the status
|
|
* set, then sends us an Immediate Notify entry.
|
|
*/
|
|
if (fmsg == NULL)
|
|
fmsg = "ABORT TAG message sent by Initiator";
|
|
|
|
isp_prt(isp, ISP_LOGWARN, "CTIO destroyed by %s", fmsg);
|
|
break;
|
|
|
|
case CT_INVAL:
|
|
/*
|
|
* CTIO rejected by the firmware due to disabled lun.
|
|
* "Cannot Happen".
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Firmware rejected CTIO for disabled lun %d",
|
|
ct->ct_lun);
|
|
break;
|
|
|
|
case CT_NOPATH:
|
|
/*
|
|
* CTIO rejected by the firmware due "no path for the
|
|
* nondisconnecting nexus specified". This means that
|
|
* we tried to access the bus while a non-disconnecting
|
|
* command is in process.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Firmware rejected CTIO for bad nexus %d/%d/%d",
|
|
ct->ct_iid, ct->ct_tgt, ct->ct_lun);
|
|
break;
|
|
|
|
case CT_RSELTMO:
|
|
fmsg = "Reselection";
|
|
/*FALLTHROUGH*/
|
|
case CT_TIMEOUT:
|
|
if (fmsg == NULL)
|
|
fmsg = "Command";
|
|
isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg);
|
|
break;
|
|
|
|
case CT_PANIC:
|
|
if (fmsg == NULL)
|
|
fmsg = "Unrecoverable Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_ERR:
|
|
if (fmsg == NULL)
|
|
fmsg = "Completed with Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_PHASE_ERROR:
|
|
if (fmsg == NULL)
|
|
fmsg = "Phase Sequence Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_TERMINATED:
|
|
if (fmsg == NULL)
|
|
fmsg = "terminated by TERMINATE TRANSFER";
|
|
/*FALLTHROUGH*/
|
|
case CT_NOACK:
|
|
if (fmsg == NULL)
|
|
fmsg = "unacknowledged Immediate Notify pending";
|
|
isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg);
|
|
break;
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "Unknown CTIO status 0x%x",
|
|
ct->ct_status & ~QLTM_SVALID);
|
|
break;
|
|
}
|
|
|
|
if (xs == NULL) {
|
|
/*
|
|
* There may be more than one CTIO for a data transfer,
|
|
* or this may be a status CTIO we're not monitoring.
|
|
*
|
|
* The assumption is that they'll all be returned in the
|
|
* order we got them.
|
|
*/
|
|
if (ct->ct_syshandle == 0) {
|
|
if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
|
|
isp_prt(isp, pl,
|
|
"intermediate CTIO completed ok");
|
|
} else {
|
|
isp_prt(isp, pl,
|
|
"unmonitored CTIO completed ok");
|
|
}
|
|
} else {
|
|
isp_prt(isp, pl,
|
|
"NO xs for CTIO (handle 0x%x) status 0x%x",
|
|
ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
|
|
}
|
|
} else {
|
|
/*
|
|
* Final CTIO completed. Release DMA resources and
|
|
* notify platform dependent layers.
|
|
*/
|
|
if ((ct->ct_flags & CT_DATAMASK) != CT_NO_DATA) {
|
|
ISP_DMAFREE(isp, xs, ct->ct_syshandle);
|
|
}
|
|
isp_prt(isp, pl, "final CTIO complete");
|
|
/*
|
|
* The platform layer will destroy the handle if appropriate.
|
|
*/
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_handle_ctio2(struct ispsoftc *isp, ct2_entry_t *ct)
|
|
{
|
|
XS_T *xs;
|
|
int pl = ISP_LOGTDEBUG2;
|
|
char *fmsg = NULL;
|
|
|
|
if (ct->ct_syshandle) {
|
|
xs = isp_find_xs(isp, ct->ct_syshandle);
|
|
if (xs == NULL)
|
|
pl = ISP_LOGALL;
|
|
} else {
|
|
xs = NULL;
|
|
}
|
|
|
|
switch(ct->ct_status & ~QLTM_SVALID) {
|
|
case CT_BUS_ERROR:
|
|
isp_prt(isp, ISP_LOGERR, "PCI DMA Bus Error");
|
|
/* FALL Through */
|
|
case CT_DATA_OVER:
|
|
case CT_DATA_UNDER:
|
|
case CT_OK:
|
|
/*
|
|
* There are generally 2 possibilities as to why we'd get
|
|
* this condition:
|
|
* We sent or received data.
|
|
* We sent status & command complete.
|
|
*/
|
|
|
|
break;
|
|
|
|
case CT_BDR_MSG:
|
|
/*
|
|
* Target Reset function received.
|
|
*
|
|
* The firmware generates an async mailbox interrupt to
|
|
* notify us of this and returns outstanding CTIOs with this
|
|
* status. These CTIOs are handled in that same way as
|
|
* CT_ABORTED ones, so just fall through here.
|
|
*/
|
|
fmsg = "TARGET RESET Task Management Function Received";
|
|
/*FALLTHROUGH*/
|
|
case CT_RESET:
|
|
if (fmsg == NULL)
|
|
fmsg = "LIP Reset";
|
|
/*FALLTHROUGH*/
|
|
case CT_ABORTED:
|
|
/*
|
|
* When an Abort message is received the firmware goes to
|
|
* Bus Free and returns all outstanding CTIOs with the status
|
|
* set, then sends us an Immediate Notify entry.
|
|
*/
|
|
if (fmsg == NULL)
|
|
fmsg = "ABORT Task Management Function Received";
|
|
|
|
isp_prt(isp, ISP_LOGERR, "CTIO2 destroyed by %s", fmsg);
|
|
break;
|
|
|
|
case CT_INVAL:
|
|
/*
|
|
* CTIO rejected by the firmware - invalid data direction.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR, "CTIO2 had wrong data directiond");
|
|
break;
|
|
|
|
case CT_RSELTMO:
|
|
fmsg = "failure to reconnect to initiator";
|
|
/*FALLTHROUGH*/
|
|
case CT_TIMEOUT:
|
|
if (fmsg == NULL)
|
|
fmsg = "command";
|
|
isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg);
|
|
break;
|
|
|
|
case CT_ERR:
|
|
fmsg = "Completed with Error";
|
|
/*FALLTHROUGH*/
|
|
case CT_LOGOUT:
|
|
if (fmsg == NULL)
|
|
fmsg = "Port Logout";
|
|
/*FALLTHROUGH*/
|
|
case CT_PORTNOTAVAIL:
|
|
if (fmsg == NULL)
|
|
fmsg = "Port not available";
|
|
/*FALLTHROUGH*/
|
|
case CT_PORTCHANGED:
|
|
if (fmsg == NULL)
|
|
fmsg = "Port Changed";
|
|
/*FALLTHROUGH*/
|
|
case CT_NOACK:
|
|
if (fmsg == NULL)
|
|
fmsg = "unacknowledged Immediate Notify pending";
|
|
isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg);
|
|
break;
|
|
|
|
case CT_INVRXID:
|
|
/*
|
|
* CTIO rejected by the firmware because an invalid RX_ID.
|
|
* Just print a message.
|
|
*/
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"CTIO2 completed with Invalid RX_ID 0x%x", ct->ct_rxid);
|
|
break;
|
|
|
|
default:
|
|
isp_prt(isp, ISP_LOGERR, "Unknown CTIO2 status 0x%x",
|
|
ct->ct_status & ~QLTM_SVALID);
|
|
break;
|
|
}
|
|
|
|
if (xs == NULL) {
|
|
/*
|
|
* There may be more than one CTIO for a data transfer,
|
|
* or this may be a status CTIO we're not monitoring.
|
|
*
|
|
* The assumption is that they'll all be returned in the
|
|
* order we got them.
|
|
*/
|
|
if (ct->ct_syshandle == 0) {
|
|
if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
|
|
isp_prt(isp, pl,
|
|
"intermediate CTIO completed ok");
|
|
} else {
|
|
isp_prt(isp, pl,
|
|
"unmonitored CTIO completed ok");
|
|
}
|
|
} else {
|
|
isp_prt(isp, pl,
|
|
"NO xs for CTIO (handle 0x%x) status 0x%x",
|
|
ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
|
|
}
|
|
} else {
|
|
if ((ct->ct_flags & CT2_DATAMASK) != CT2_NO_DATA) {
|
|
ISP_DMAFREE(isp, xs, ct->ct_syshandle);
|
|
}
|
|
if (ct->ct_flags & CT_SENDSTATUS) {
|
|
/*
|
|
* Sent status and command complete.
|
|
*
|
|
* We're now really done with this command, so we
|
|
* punt to the platform dependent layers because
|
|
* only there can we do the appropriate command
|
|
* complete thread synchronization.
|
|
*/
|
|
isp_prt(isp, pl, "status CTIO complete");
|
|
} else {
|
|
/*
|
|
* Final CTIO completed. Release DMA resources and
|
|
* notify platform dependent layers.
|
|
*/
|
|
isp_prt(isp, pl, "data CTIO complete");
|
|
}
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
|
|
/*
|
|
* The platform layer will destroy the handle if appropriate.
|
|
*/
|
|
}
|
|
}
|
|
#endif
|