NetBSD/sys/arch/sun3/dev/dmareg.h
gwr 4d67424412 Make "dma" a real device so it can attach before esp.
Also pull in some changes from the sparc version.
1999-04-08 04:46:41 +00:00

82 lines
3.7 KiB
C

/* $NetBSD: dmareg.h,v 1.3 1999/04/08 04:46:41 gwr Exp $ */
/*
* Copyright (c) 1994 Peter Galbavy. All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Peter Galbavy.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#define DMACSRBITS "\020\01INT\02ERR\03DR1\04DR2\05IEN\011WRITE\016ENCNT\017TC\032DMAON"
struct dma_regs {
u_int32_t csr; /* DMA CSR */
/* bits common to all revs. */
#define D_INT_PEND 0x00000001 /* interrupt pending */
#define D_ERR_PEND 0x00000002 /* error pending */
#define D_PACKCNT 0x0000000c /* byte pack count */
#define D_INT_EN 0x00000010 /* interrupt enable */
#define D_FLUSH 0x00000020 /* invalidate fifo */
#define D_DRAIN 0x00000040 /* drain fifo */
#define D_RESET 0x00000080 /* reset scsi */
#define D_WRITE 0x00000100 /* device -> mem */
#define D_EN_DMA 0x00000200 /* enable DMA requests */
#define D_R_PEND 0x00000400 /* REV1,ESC: request pending */
#define D_BYTEADR 0x00001800 /* REV1: next byte address */
#define D_EN_CNT 0x00002000 /* REV1: enable byte counter */
#define D_TC 0x00004000 /* REV1,2: terminal count */
#define D_BURST_SIZE 0x000c0000 /* read/write burst size */
#define D_BURST_16 0x00000000 /* 16-byte bursts */
#define D_BURST_32 0x00040000 /* 32-byte bursts */
#define D_BURST_0 0x00080000 /* no bursts (SCSI-only) */
#define D_TWO_CYCLE 0x00200000 /* REV3: 2 clocks per transfer */
#define D_FASTER 0x00400000 /* 3 clocks per transfer */
#define D_TCI_DIS 0x00800000 /* disable intr on D_TC */
#define D_EN_NEXT 0x01000000 /* enable auto next address */
#define D_DMA_ON 0x02000000 /* enable dma from scsi */
#define D_A_LOADED 0x04000000 /* address loaded */
#define D_NA_LOADED 0x08000000 /* next address loaded */
#define D_DEV_ID 0xf0000000 /* device ID */
#define DMAREV_0 0x00000000 /* Sunray DMA */
#define DMAREV_ESC 0x40000000 /* DMA ESC array */
#define DMAREV_1 0x80000000 /* 'DMA' */
#define DMAREV_PLUS 0x90000000 /* 'DMA+' */
#define DMAREV_2 0xa0000000 /* 'DMA2' */
u_int32_t addr;
#define DMA_D_ADDR 0x01 /* DMA ADDR (in longs) */
u_int32_t bcnt; /* DMA COUNT (in longs) */
#define D_BCNT_MASK 0x00ffffff /* only 24 bits */
u_int32_t test; /* DMA TEST (in longs) */
#define en_testcsr addr /* enet registers overlap */
#define en_cachev bcnt
#define en_bar test
};