NetBSD/sys/dev/ppbus/ppbus_1284.c

690 lines
17 KiB
C

/* $NetBSD: ppbus_1284.c,v 1.12 2008/04/18 14:56:40 cegger Exp $ */
/*-
* Copyright (c) 1997 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* FreeBSD: src/sys/dev/ppbus/ppb_1284.c,v 1.11 2000/01/14 08:03:14 nsouch Exp
*
*/
/* General purpose routines for the IEEE1284-1994 Standard */
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ppbus_1284.c,v 1.12 2008/04/18 14:56:40 cegger Exp $");
#include "opt_ppbus_1284.h"
#include <sys/param.h>
#include <sys/malloc.h>
#include <sys/systm.h>
#include <dev/ppbus/ppbus_conf.h>
#include <dev/ppbus/ppbus_base.h>
#include <dev/ppbus/ppbus_1284.h>
#include <dev/ppbus/ppbus_io.h>
#include <dev/ppbus/ppbus_var.h>
/* Wait for the peripherial up to 40ms */
static int
do_1284_wait(struct ppbus_softc * bus, char mask, char status)
{
return (ppbus_poll_bus(bus->sc_dev, 4, mask, status,
PPBUS_NOINTR | PPBUS_POLL));
}
/* Wait for the host up to 1 second (peripheral side) */
static int
do_peripheral_wait(struct ppbus_softc * bus, char mask, char status)
{
return (ppbus_poll_bus(bus->sc_dev, 100, mask, status,
PPBUS_NOINTR | PPBUS_POLL));
}
/* Unconditionaly reset the error field */
static int
ppbus_1284_reset_error(struct ppbus_softc * bus, int state)
{
bus->sc_1284_error = PPBUS_NO_ERROR;
bus->sc_1284_state = state;
return 0;
}
/* Get IEEE1284 state */
int
ppbus_1284_get_state(device_t dev)
{
struct ppbus_softc *sc = device_private(dev);
return sc->sc_1284_state;
}
/* Set IEEE1284 state if no error occurred */
int
ppbus_1284_set_state(device_t dev, int state)
{
struct ppbus_softc * bus = device_private(dev);
/* call ppbus_1284_reset_error() if you absolutly want to change
* the state from PPBUS_ERROR to another */
if ((bus->sc_1284_state != PPBUS_ERROR) &&
(bus->sc_1284_error == PPBUS_NO_ERROR)) {
bus->sc_1284_state = state;
bus->sc_1284_error = PPBUS_NO_ERROR;
}
return 0;
}
/* Set the IEEE1284 error field */
static int
ppbus_1284_set_error(struct ppbus_softc * bus, int error, int event)
{
/* do not accumulate errors */
if ((bus->sc_1284_error == PPBUS_NO_ERROR) &&
(bus->sc_1284_state != PPBUS_ERROR)) {
bus->sc_1284_error = error;
bus->sc_1284_state = PPBUS_ERROR;
}
#ifdef DEBUG_1284
printf("%s<1284>: error=%d status=0x%x event=%d\n",
device_xname(bus->sc_dev), error, ppbus_rstr(bus->sc_dev),
event);
#endif
return 0;
}
/* Converts mode+options into ext. value */
static int
ppbus_request_mode(int mode, int options)
{
int request_mode = 0;
if (options & PPBUS_EXTENSIBILITY_LINK) {
request_mode = EXT_LINK_1284_NORMAL;
}
else {
switch (mode) {
case PPBUS_NIBBLE:
request_mode = (options & PPBUS_REQUEST_ID) ?
NIBBLE_1284_REQUEST_ID :
NIBBLE_1284_NORMAL;
break;
case PPBUS_PS2:
request_mode = (options & PPBUS_REQUEST_ID) ?
BYTE_1284_REQUEST_ID :
BYTE_1284_NORMAL;
break;
case PPBUS_ECP:
if (options & PPBUS_USE_RLE)
request_mode = (options & PPBUS_REQUEST_ID) ?
ECP_1284_RLE_REQUEST_ID :
ECP_1284_RLE;
else
request_mode = (options & PPBUS_REQUEST_ID) ?
ECP_1284_REQUEST_ID :
ECP_1284_NORMAL;
break;
case PPBUS_EPP:
request_mode = EPP_1284_NORMAL;
break;
default:
panic("%s: unsupported mode %d\n", __func__, mode);
}
}
return (request_mode);
}
/* Negotiate the peripheral side */
int
ppbus_peripheral_negotiate(device_t dev, int mode, int options)
{
struct ppbus_softc * bus = device_private(dev);
int spin, request_mode, error = 0;
char r;
ppbus_1284_terminate(dev);
ppbus_1284_set_state(dev, PPBUS_PERIPHERAL_NEGOTIATION);
/* compute ext. value */
request_mode = ppbus_request_mode(mode, options);
/* wait host */
spin = 10;
while (spin-- && (ppbus_rstr(dev) & nBUSY))
DELAY(1);
/* check termination */
if (!(ppbus_rstr(dev) & SELECT) || !spin) {
error = ENODEV;
goto error;
}
/* Event 4 - read ext. value */
r = ppbus_rdtr(dev);
/* nibble mode is not supported */
if ((r == (char)request_mode) ||
(r == NIBBLE_1284_NORMAL)) {
/* Event 5 - restore direction bit, no data avail */
ppbus_wctr(dev, (STROBE | nINIT) & ~(SELECTIN));
DELAY(1);
/* Event 6 */
ppbus_wctr(dev, (nINIT) & ~(SELECTIN | STROBE));
if (r == NIBBLE_1284_NORMAL) {
#ifdef DEBUG_1284
printf("R");
#endif
ppbus_1284_set_error(bus, PPBUS_MODE_UNSUPPORTED, 4);
error = EINVAL;
goto error;
}
else {
ppbus_1284_set_state(dev, PPBUS_PERIPHERAL_IDLE);
#ifdef DEBUG_1284
printf("A");
#endif
/* negotiation succeeds */
}
}
else {
/* Event 5 - mode not supported */
ppbus_wctr(dev, SELECTIN);
DELAY(1);
/* Event 6 */
ppbus_wctr(dev, (SELECTIN) & ~(STROBE | nINIT));
ppbus_1284_set_error(bus, PPBUS_MODE_UNSUPPORTED, 4);
#ifdef DEBUG_1284
printf("r");
#endif
error = EINVAL;
goto error;
}
return (0);
error:
ppbus_peripheral_terminate(dev, PPBUS_WAIT);
return (error);
}
/* Terminate peripheral transfer side. Always return 0 in compatible mode */
int
ppbus_peripheral_terminate(device_t dev, int how)
{
struct ppbus_softc * bus = device_private(dev);
int error = 0;
#ifdef DEBUG_1284
printf("t");
#endif
ppbus_1284_set_state(dev, PPBUS_PERIPHERAL_TERMINATION);
/* Event 22 - wait up to host response time (1s) */
if ((error = do_peripheral_wait(bus, SELECT | nBUSY, 0))) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 22);
goto error;
}
/* Event 24 */
ppbus_wctr(dev, (nINIT | STROBE) & ~(AUTOFEED | SELECTIN));
/* Event 25 - wait up to host response time (1s) */
if ((error = do_peripheral_wait(bus, nBUSY, nBUSY))) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 25);
goto error;
}
/* Event 26 */
ppbus_wctr(dev, (SELECTIN | nINIT | STROBE) & ~(AUTOFEED));
DELAY(1);
/* Event 27 */
ppbus_wctr(dev, (SELECTIN | nINIT) & ~(STROBE | AUTOFEED));
/* Event 28 - wait up to host response time (1s) */
if ((error = do_peripheral_wait(bus, nBUSY, 0))) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 28);
goto error;
}
error:
ppbus_1284_terminate(dev);
ppbus_1284_set_state(dev, PPBUS_FORWARD_IDLE);
return (0);
}
/* Write 1 byte to host in BYTE mode (peripheral side) */
static int
byte_peripheral_outbyte(device_t dev, char *buffer, int last)
{
struct ppbus_softc * bus = device_private(dev);
int error = 0;
/* Event 7 */
if ((error = do_1284_wait(bus, nBUSY, nBUSY))) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 7);
goto error;
}
/* check termination */
if (!(ppbus_rstr(dev) & SELECT)) {
ppbus_peripheral_terminate(dev, PPBUS_WAIT);
goto error;
}
/* Event 15 - put byte on data lines */
#ifdef DEBUG_1284
printf("B");
#endif
ppbus_wdtr(dev, *buffer);
/* Event 9 */
ppbus_wctr(dev, (AUTOFEED | STROBE) & ~(nINIT | SELECTIN));
/* Event 10 - wait data read */
if ((error = do_peripheral_wait(bus, nBUSY, 0))) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 16);
goto error;
}
/* Event 11 */
if (!last) {
ppbus_wctr(dev, (AUTOFEED) & ~(nINIT | STROBE | SELECTIN));
} else {
ppbus_wctr(dev, (nINIT) & ~(STROBE | SELECTIN | AUTOFEED));
}
#if 0
/* Event 16 - wait strobe */
if ((error = do_peripheral_wait(bus, nACK | nBUSY, 0))) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 16);
goto error;
}
#endif
/* check termination */
if (!(ppbus_rstr(dev) & SELECT)) {
ppbus_peripheral_terminate(dev, PPBUS_WAIT);
goto error;
}
error:
return (error);
}
/* Write n bytes to host in BYTE mode (peripheral side) */
int
byte_peripheral_write(device_t dev, char *buffer, int len,
int *sent)
{
int error = 0, i;
char r;
ppbus_1284_set_state(dev, PPBUS_PERIPHERAL_TRANSFER);
/* wait forever, the remote host is master and should initiate
* termination
*/
for(i = 0; i < len; i++) {
/* force remote nFAULT low to release the remote waiting
* process, if any
*/
r = ppbus_rctr(dev);
ppbus_wctr(dev, r & ~nINIT);
#ifdef DEBUG_1284
printf("y");
#endif
/* Event 7 */
error = ppbus_poll_bus(dev, PPBUS_FOREVER, nBUSY, nBUSY,
PPBUS_INTR);
if (error && error != EWOULDBLOCK)
goto error;
#ifdef DEBUG_1284
printf("b");
#endif
if ((error = byte_peripheral_outbyte(dev, buffer+i, (i == len-1))))
goto error;
}
error:
if (!error)
ppbus_1284_set_state(dev, PPBUS_PERIPHERAL_IDLE);
*sent = i;
return (error);
}
/* Read the device ID using the specified mode */
int
ppbus_1284_read_id(device_t dev, int mode, char ** buffer,
size_t * size, size_t * read)
{
u_int16_t msg_sz;
u_int8_t length_field;
u_int8_t old_mode;
int error;
int old_ivar;
int new_ivar = 1;
error = ppbus_read_ivar(dev, PPBUS_IVAR_IEEE, &old_ivar);
if(error) {
printf("%s(%s): error reading PPBUS_IVAR_IEEE.\n", __func__,
device_xname(dev));
return error;
}
if(old_ivar == 0) {
error = ppbus_write_ivar(dev, PPBUS_IVAR_IEEE, &new_ivar);
if(error) {
printf("%s(%s): error enabling IEEE usage.\n", __func__,
device_xname(dev));
return error;
}
}
old_mode = ppbus_get_mode(dev);
switch (mode) {
case PPBUS_NIBBLE:
case PPBUS_ECP:
case PPBUS_BYTE:
error = ppbus_set_mode(dev, mode, PPBUS_REQUEST_ID);
if(error) {
printf("%s(%s): error setting bus mode.\n", __func__,
device_xname(dev));
goto end_read_id;
}
break;
default:
printf("%s(%s): mode does not support returning device ID.\n",
__func__, device_xname(dev));
error = ENODEV;
goto end_read_id;
}
error = ppbus_read(dev, &length_field, 1, 0, read);
if(error) {
printf("%s(%s): error reading first byte.\n", __func__,
device_xname(dev));
goto end_read_id;
}
msg_sz = length_field;
error = ppbus_read(dev, &length_field, 1, 0, read);
if(error) {
printf("%s(%s): error reading second byte.\n",
__func__, device_xname(dev));
goto end_read_id;
}
msg_sz <<= 8;
msg_sz |= length_field;
msg_sz -= 2;
if(msg_sz <= 0) {
printf("%s(%s): device ID length <= 0.\n", __func__,
device_xname(dev));
goto end_read_id;
}
*buffer = malloc(msg_sz, M_DEVBUF, M_WAITOK);
*size = msg_sz;
error = ppbus_read(dev, *buffer, msg_sz, 0, read);
end_read_id:
ppbus_set_mode(dev, old_mode, 0);
if(old_ivar == 0) {
if(ppbus_write_ivar(dev, PPBUS_IVAR_IEEE, &old_ivar)) {
printf("%s(%s): error restoring PPBUS_IVAR_IEEE.\n",
__func__, device_xname(dev));
}
}
return (error);
}
/*
* IEEE1284 negotiation phase: after negotiation, nFAULT is low if data is
* available for reverse modes.
*/
int
ppbus_1284_negotiate(device_t dev, int mode, int options)
{
struct ppbus_softc * bus = device_private(dev);
int error;
int request_mode;
#ifdef DEBUG_1284
printf("n");
#endif
if (ppbus_1284_get_state(dev) >= PPBUS_PERIPHERAL_NEGOTIATION)
ppbus_peripheral_terminate(dev, PPBUS_WAIT);
#ifdef DEBUG_1284
printf("%d", mode);
#endif
/* ensure the host is in compatible mode */
ppbus_1284_terminate(dev);
/* reset error to catch the actual negotiation error */
ppbus_1284_reset_error(bus, PPBUS_FORWARD_IDLE);
/* calculate ext. value */
request_mode = ppbus_request_mode(mode, options);
/* default state */
ppbus_wctr(dev, (nINIT | SELECTIN) & ~(STROBE | AUTOFEED));
DELAY(1);
/* enter negotiation phase */
ppbus_1284_set_state(dev, PPBUS_NEGOTIATION);
/* Event 0 - put the exten. value on the data lines */
ppbus_wdtr(dev, request_mode);
#ifdef PERIPH_1284
/* request remote host attention */
ppbus_wctr(dev, (nINIT | STROBE) & ~(AUTOFEED | SELECTIN));
DELAY(1);
ppbus_wctr(dev, (nINIT) & ~(STROBE | AUTOFEED | SELECTIN));
#else
DELAY(1);
#endif /* !PERIPH_1284 */
/* Event 1 - enter IEEE1284 mode */
ppbus_wctr(dev, (nINIT | AUTOFEED) & ~(STROBE | SELECTIN));
#ifdef PERIPH_1284
/* ignore the PError line, wait a bit more, remote host's
* interrupts don't respond fast enough */
if (ppbus_poll_bus(bus, 40, nACK | SELECT | nFAULT,
SELECT | nFAULT, PPBUS_NOINTR | PPBUS_POLL)) {
ppbus_1284_set_error(bus, PPBUS_NOT_IEEE1284, 2);
error = ENODEV;
goto error;
}
#else
/* Event 2 - trying IEEE1284 dialog */
if (do_1284_wait(bus, nACK | PERROR | SELECT | nFAULT,
PERROR | SELECT | nFAULT)) {
ppbus_1284_set_error(bus, PPBUS_NOT_IEEE1284, 2);
error = ENODEV;
goto error;
}
#endif /* !PERIPH_1284 */
/* Event 3 - latch the ext. value to the peripheral */
ppbus_wctr(dev, (nINIT | STROBE | AUTOFEED) & ~SELECTIN);
DELAY(1);
/* Event 4 - IEEE1284 device recognized */
ppbus_wctr(dev, nINIT & ~(SELECTIN | AUTOFEED | STROBE));
/* Event 6 - waiting for status lines */
if (do_1284_wait(bus, nACK, nACK)) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 6);
error = EBUSY;
goto error;
}
/* Event 7 - quering result consider nACK not to misunderstand
* a remote computer terminate sequence */
if (options & PPBUS_EXTENSIBILITY_LINK) {
/* XXX not fully supported yet */
ppbus_1284_terminate(dev);
error = ENODEV;
goto error;
/* return (0); */
}
if (request_mode == NIBBLE_1284_NORMAL) {
if (do_1284_wait(bus, nACK | SELECT, nACK)) {
ppbus_1284_set_error(bus, PPBUS_MODE_UNSUPPORTED, 7);
error = ENODEV;
goto error;
}
} else {
if (do_1284_wait(bus, nACK | SELECT, SELECT | nACK)) {
ppbus_1284_set_error(bus, PPBUS_MODE_UNSUPPORTED, 7);
error = ENODEV;
goto error;
}
}
switch (mode) {
case PPBUS_NIBBLE:
case PPBUS_PS2:
/* enter reverse idle phase */
ppbus_1284_set_state(dev, PPBUS_REVERSE_IDLE);
break;
case PPBUS_ECP:
/* negotiation ok, now setup the communication */
ppbus_1284_set_state(dev, PPBUS_SETUP);
ppbus_wctr(dev, (nINIT | AUTOFEED) & ~(SELECTIN | STROBE));
#ifdef PERIPH_1284
/* ignore PError line */
if (do_1284_wait(bus, nACK | SELECT | nBUSY,
nACK | SELECT | nBUSY)) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 30);
error = ENODEV;
goto error;
}
#else
if (do_1284_wait(bus, nACK | SELECT | PERROR | nBUSY,
nACK | SELECT | PERROR | nBUSY)) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 30);
error = ENODEV;
goto error;
}
#endif /* !PERIPH_1284 */
/* ok, the host enters the ForwardIdle state */
ppbus_1284_set_state(dev, PPBUS_ECP_FORWARD_IDLE);
break;
case PPBUS_EPP:
ppbus_1284_set_state(dev, PPBUS_EPP_IDLE);
break;
default:
panic("%s: unknown mode (%d)!", __func__, mode);
}
return 0;
error:
ppbus_1284_terminate(dev);
return error;
}
/*
* IEEE1284 termination phase, return code should ignored since the host
* is _always_ in compatible mode after ppbus_1284_terminate()
*/
int
ppbus_1284_terminate(device_t dev)
{
struct ppbus_softc * bus = device_private(dev);
#ifdef DEBUG_1284
printf("T");
#endif
/* do not reset error here to keep the error that
* may occurred before the ppbus_1284_terminate() call */
ppbus_1284_set_state(dev, PPBUS_TERMINATION);
#ifdef PERIPH_1284
/* request remote host attention */
ppbus_wctr(dev, (nINIT | STROBE | SELECTIN) & ~(AUTOFEED));
DELAY(1);
#endif /* PERIPH_1284 */
/* Event 22 - set nSelectin low and nAutoFeed high */
ppbus_wctr(dev, (nINIT | SELECTIN) & ~(STROBE | AUTOFEED));
/* Event 24 - waiting for peripheral, Xflag ignored */
if (do_1284_wait(bus, nACK | nBUSY | nFAULT, nFAULT)) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 24);
goto error;
}
/* Event 25 - set nAutoFd low */
ppbus_wctr(dev, (nINIT | SELECTIN | AUTOFEED) & ~STROBE);
/* Event 26 - compatible mode status is set */
/* Event 27 - peripheral set nAck high */
if (do_1284_wait(bus, nACK, nACK)) {
ppbus_1284_set_error(bus, PPBUS_TIMEOUT, 27);
}
/* Event 28 - end termination, return to idle phase */
ppbus_wctr(dev, (nINIT | SELECTIN) & ~(STROBE | AUTOFEED));
error:
ppbus_1284_set_state(dev, PPBUS_FORWARD_IDLE);
return (0);
}