NetBSD/sys/dev/podulebus/acemidi.c

141 lines
4.4 KiB
C

/* $NetBSD: acemidi.c,v 1.14 2008/03/14 15:09:11 cube Exp $ */
/*-
* Copyright (c) 2001 Ben Harris
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: acemidi.c,v 1.14 2008/03/14 15:09:11 cube Exp $");
#include <sys/param.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <dev/podulebus/podulebus.h>
#include <dev/podulebus/podules.h>
#include <dev/podulebus/acemidireg.h>
#include <sys/termios.h>
#include <dev/ic/comvar.h>
#include <dev/ic/comreg.h>
struct com_acemidi_softc {
struct com_softc sc_com;
struct evcnt sc_intrcnt;
};
static int acemidi_match(device_t, cfdata_t , void *);
static void acemidi_attach(device_t, device_t, void *);
static int com_acemidi_match(device_t, cfdata_t, void *);
static void com_acemidi_attach(device_t, device_t, void *);
CFATTACH_DECL_NEW(acemidi, 0,
acemidi_match, acemidi_attach, NULL, NULL);
CFATTACH_DECL_NEW(com_acemidi, sizeof(struct com_acemidi_softc),
com_acemidi_match, com_acemidi_attach, NULL, NULL);
static int
acemidi_match(device_t parent, cfdata_t cf, void *aux)
{
struct podulebus_attach_args *pa = aux;
if (pa->pa_product == PODULE_MIDICONNECT)
return 1;
return 0;
}
static void
acemidi_attach(device_t parent, device_t self, void *aux)
{
/* struct acemidi_softc *sc = device_private(self); */
/* struct podulebus_attach_args *pa = aux; */
printf("\n");
config_found_ia(self, "acemidi", aux, NULL);
}
static int
com_acemidi_match(device_t parent, cfdata_t cf, void *aux)
{
return 1;
}
static void
com_acemidi_attach(device_t parent, device_t self, void *aux)
{
struct com_acemidi_softc *sc = device_private(self);
struct com_softc *csc = &sc->sc_com;
struct podulebus_attach_args *pa = aux;
bus_space_handle_t ioh;
bus_space_tag_t iot;
bus_addr_t iobase;
iot = pa->pa_fast_t;
iobase = pa->pa_fast_base + ACEMIDI_16550_BASE;
bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh);
COM_INIT_REGS(csc->sc_regs, iot, ioh, iobase);
csc->sc_frequency = ACEMIDI_16550_FREQ;
com_attach_subr(csc);
evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
device_xname(self), "intr");
podulebus_irq_establish(pa->pa_ih, IPL_SERIAL, comintr, sc,
&sc->sc_intrcnt);
}
/*
* Stray IRQ bug:
*
* Occasionally, when receiving, we get a stray IRQ. Sometimes, the interrupt
* bit on the unixbp reads as clear. In any case, comintr() gets an IIR
* of 0xc1 (no interrupts pending).
*
* The behaviour can be observed with a logic probe:
*
* Channel 1 to PIRQ* (pin 19 on IC3 on A540 backplane)
* Channel 2 to INTR on 16550
* trigger on ch1 low, ch2 falling
* 2 us/div
*
* This catches cases where the 16550 de-asserts the interrupt before
* irq_handler is entered and disables the interrupt at unixbp (by calling
* splhigh()).
*
* This gets us 5us pulses on INTR and PIRQ*. Now to work out why.
*
* Connecting channel 3 to the CS2* pin on the 16550 shows it high throughout,
* so the interrupt isn't being cleared by the host. MR, similarly, is low
* throughout, so it's not being cleared by a reset.
*/