NetBSD/sys/arch/i386/stand/wdbootblk.c

233 lines
6.1 KiB
C

/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)wdbootblk.c 7.1 (Berkeley) 4/28/91
* $Id: wdbootblk.c,v 1.2 1993/05/22 08:02:27 cgd Exp $
*/
/*
* wdbootblk.s:
* Written 7/6/90 by William F. Jolitz
* Initial block boot for AT/386 with typical Western Digital
* WD 1002-WA2 (or upwards compatable). Works either as
* first and sole partition bootstrap, or as loaded by a
* earlier BIOS boot when on an inner partition of the disk.
*
* Goal is to read in sucessive 7.5Kbytes of bootstrap to
* execute.
*
* No attempt is made to handle disk errors.
*/
#include "i386/isa/isa.h"
#include "i386/isa/wdreg.h"
#define NOP inb $0x84,%al
#define BIOSRELOC 0x7c00
#define start RELOC+0x400
/* step 0 force descriptors to bottom of address space */
cli
.byte 0xb8,0x30,0x00 /* mov $0x30,%ax */
mov %ax, %ss
.byte 0xbc,0x00,0x01 /* mov $0x100,%sp */
xorl %eax,%eax
movl %ax,%ds
movl %ax,%es
/* obtain BIOS parameters for hard disk XXX */
movb $0x9f,%ah /* write to 0x9ff00 XXX */
movb $0xf0,%al
mov %ax,%es
xor %edi,%edi
.byte 0xf, 0xb4, 0x36 ; .word 0x41*4 /* lfs 0x41*4, %si */
xorb %ch,%ch
movb $0x10,%cl
fs
rep
movsb
.byte 0xf, 0xb4, 0x36 ; .word 0x46*4 /* lfs 0x46*4, %si */
xorb %ch,%ch
movb $0x10,%cl
fs
rep
movsb
xorl %eax,%eax
movl %ax,%es
/* step 1 load new descriptor table */
.byte 0x3E,0x0F,1,0x16
.word BIOSRELOC+0x6e #GDTptr
# word aword cs lgdt GDTptr
/* step 2 turn on protected mode */
smsw %ax
orb $1,%al
lmsw %ax
jmp 1f
nop
/* step 3 reload segment descriptors */
1:
xorl %eax,%eax
movb $0x10,%al
movl %ax,%ds
movl %ax,%es
movl %ax,%ss
word
ljmp $0x8,$ BIOSRELOC+0x74 /* would be nice if .-RELOC+0x7c00 worked */
/* Global Descriptor Table contains three descriptors:
* 0x00: Null: not used
* 0x08: Code: code segment starts at 0 and extents for 4 gigabytes
* 0x10: Data: data segment starts at 0 and extends for 4 gigabytes
* (overlays code)
*/
GDT:
NullDesc: .word 0,0,0,0 # null descriptor - not used
CodeDesc: .word 0xFFFF # limit at maximum: (bits 15:0)
.byte 0,0,0 # base at 0: (bits 23:0)
.byte 0x9f # present/priv level 0/code/conforming/readable
.byte 0xcf # page granular/default 32-bit/limit(bits 19:16)
.byte 0 # base at 0: (bits 31:24)
DataDesc: .word 0xFFFF # limit at maximum: (bits 15:0)
.byte 0,0,0 # base at 0: (bits 23:0)
.byte 0x93 # present/priv level 0/data/expand-up/writeable
.byte 0xcf # page granular/default 32-bit/limit(bits 19:16)
.byte 0 # base at 0: (bits 31:24)
/* Global Descriptor Table pointer
* contains 6-byte pointer information for LGDT
*/
GDTptr: .word 0x17 # limit to three 8 byte selectors(null,code,data)
.long BIOSRELOC+0x56 # GDT -- arrgh, gas again!
/* step 4 relocate to final bootstrap address. */
reloc:
movl $ BIOSRELOC,%esi
movl $ RELOC,%edi
movl $512,%ecx
rep
movsb
movl $0xa0000, %esp
pushl $dodisk
ret
/* step 5 load remaining 15 sectors off disk */
dodisk:
movl $ IO_WD1+wd_seccnt,%edx
movb $ 15,%al
outb %al,%dx
NOP
movl $ IO_WD1+wd_sector,%edx
movb $ 2,%al
outb %al,%dx
NOP
#outb(wdc+wd_cyl_lo, (cyloffset & 0xff));
#outb(wdc+wd_cyl_hi, (cyloffset >> 8));
#outb(wdc+wd_sdh, WDSD_IBM | (unit << 4));
movl $ IO_WD1+wd_command,%edx
movb $ WDCC_READ,%al
outb %al,%dx
NOP
cld
/* check to make sure controller is not busy and we have data ready */
readblk:
movl $ IO_WD1+wd_status,%edx
NOP
inb %dx,%al
testb $ WDCS_BUSY,%al
jnz readblk
testb $ WDCS_DRQ,%al
jz readblk
/* read a block into final position in memory */
movl $ IO_WD1+wd_data,%edx
movl $ 256,%ecx
.byte 0x66,0xf2,0x6d # rep insw
NOP
/* need more blocks to be read in? */
cmpl $ RELOC+16*512-1,%edi
jl readblk
/* for clever bootstrap, dig out boot unit and cylinder */
movl $ IO_WD1+wd_cyl_lo,%edx
inb %dx,%al
xorl %ecx,%ecx
movb %al,%cl
incl %edx
NOP
inb %dx,%al /* cyl_hi */
movb %al,%ch
pushl %ecx /* cyloffset */
incl %edx
xorl %eax,%eax
NOP
inb %dx,%al /* sdh */
andb $0x10,%al /* isolate unit # bit */
shrb $4,%al
pushl %eax /* unit */
/* wd controller is major device 0 */
xorl %eax,%eax
pushl %eax /* bootdev */
/* sorry, no flags at this point! */
movl $ start, %eax
call %eax /* main (dev, unit, offset) */
ebootblkcode:
/* remaining space usable for a disk label */
.org 0x1fe
.word 0xaa55 /* signature -- used by BIOS ROM */
ebootblk: /* MUST BE EXACTLY 0x200 BIG FOR SURE */