2532 lines
66 KiB
C
2532 lines
66 KiB
C
/* $NetBSD: wi.c,v 1.138 2003/10/24 23:58:22 mycroft Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Lucent WaveLAN/IEEE 802.11 PCMCIA driver for NetBSD.
|
|
*
|
|
* Original FreeBSD driver written by Bill Paul <wpaul@ctr.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The WaveLAN/IEEE adapter is the second generation of the WaveLAN
|
|
* from Lucent. Unlike the older cards, the new ones are programmed
|
|
* entirely via a firmware-driven controller called the Hermes.
|
|
* Unfortunately, Lucent will not release the Hermes programming manual
|
|
* without an NDA (if at all). What they do release is an API library
|
|
* called the HCF (Hardware Control Functions) which is supposed to
|
|
* do the device-specific operations of a device driver for you. The
|
|
* publically available version of the HCF library (the 'HCF Light') is
|
|
* a) extremely gross, b) lacks certain features, particularly support
|
|
* for 802.11 frames, and c) is contaminated by the GNU Public License.
|
|
*
|
|
* This driver does not use the HCF or HCF Light at all. Instead, it
|
|
* programs the Hermes controller directly, using information gleaned
|
|
* from the HCF Light code and corresponding documentation.
|
|
*
|
|
* This driver supports both the PCMCIA and ISA versions of the
|
|
* WaveLAN/IEEE cards. Note however that the ISA card isn't really
|
|
* anything of the sort: it's actually a PCMCIA bridge adapter
|
|
* that fits into an ISA slot, into which a PCMCIA WaveLAN card is
|
|
* inserted. Consequently, you need to use the pccard support for
|
|
* both the ISA and PCMCIA adapters.
|
|
*/
|
|
|
|
/*
|
|
* FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the
|
|
* Oslo IETF plenary meeting.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: wi.c,v 1.138 2003/10/24 23:58:22 mycroft Exp $");
|
|
|
|
#define WI_HERMES_AUTOINC_WAR /* Work around data write autoinc bug. */
|
|
#define WI_HERMES_STATS_WAR /* Work around stats counter bug. */
|
|
|
|
#include "bpfilter.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/device.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/kernel.h> /* for hz */
|
|
#include <sys/proc.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_llc.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_ether.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_compat.h>
|
|
#include <net80211/ieee80211_ioctl.h>
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#include <net/bpfdesc.h>
|
|
#endif
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/ic/wi_ieee.h>
|
|
#include <dev/ic/wireg.h>
|
|
#include <dev/ic/wivar.h>
|
|
|
|
static int wi_init(struct ifnet *);
|
|
static void wi_stop(struct ifnet *, int);
|
|
static void wi_start(struct ifnet *);
|
|
static int wi_reset(struct wi_softc *);
|
|
static void wi_watchdog(struct ifnet *);
|
|
static int wi_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static int wi_media_change(struct ifnet *);
|
|
static void wi_media_status(struct ifnet *, struct ifmediareq *);
|
|
|
|
static void wi_rx_intr(struct wi_softc *);
|
|
static void wi_tx_intr(struct wi_softc *);
|
|
static void wi_tx_ex_intr(struct wi_softc *);
|
|
static void wi_info_intr(struct wi_softc *);
|
|
|
|
static int wi_get_cfg(struct ifnet *, u_long, caddr_t);
|
|
static int wi_set_cfg(struct ifnet *, u_long, caddr_t);
|
|
static int wi_cfg_txrate(struct wi_softc *);
|
|
static int wi_write_txrate(struct wi_softc *, int);
|
|
static int wi_write_wep(struct wi_softc *);
|
|
static int wi_write_multi(struct wi_softc *);
|
|
static int wi_alloc_fid(struct wi_softc *, int, int *);
|
|
static void wi_read_nicid(struct wi_softc *);
|
|
static int wi_write_ssid(struct wi_softc *, int, u_int8_t *, int);
|
|
|
|
static int wi_cmd(struct wi_softc *, int, int, int, int);
|
|
static int wi_seek_bap(struct wi_softc *, int, int);
|
|
static int wi_read_bap(struct wi_softc *, int, int, void *, int);
|
|
static int wi_write_bap(struct wi_softc *, int, int, void *, int);
|
|
static int wi_mwrite_bap(struct wi_softc *, int, int, struct mbuf *, int);
|
|
static int wi_read_rid(struct wi_softc *, int, void *, int *);
|
|
static int wi_write_rid(struct wi_softc *, int, void *, int);
|
|
|
|
static int wi_newstate(struct ieee80211com *, enum ieee80211_state, int);
|
|
static int wi_set_tim(struct ieee80211com *, int, int);
|
|
|
|
static int wi_scan_ap(struct wi_softc *, u_int16_t, u_int16_t);
|
|
static void wi_scan_result(struct wi_softc *, int, int);
|
|
|
|
static void wi_dump_pkt(struct wi_frame *, struct ieee80211_node *, int rssi);
|
|
|
|
static inline int
|
|
wi_write_val(struct wi_softc *sc, int rid, u_int16_t val)
|
|
{
|
|
|
|
val = htole16(val);
|
|
return wi_write_rid(sc, rid, &val, sizeof(val));
|
|
}
|
|
|
|
static struct timeval lasttxerror; /* time of last tx error msg */
|
|
static int curtxeps = 0; /* current tx error msgs/sec */
|
|
static int wi_txerate = 0; /* tx error rate: max msgs/sec */
|
|
|
|
#ifdef WI_DEBUG
|
|
int wi_debug = 0;
|
|
|
|
#define DPRINTF(X) if (wi_debug) printf X
|
|
#define DPRINTF2(X) if (wi_debug > 1) printf X
|
|
#define IFF_DUMPPKTS(_ifp) \
|
|
(((_ifp)->if_flags & (IFF_DEBUG|IFF_LINK2)) == (IFF_DEBUG|IFF_LINK2))
|
|
#else
|
|
#define DPRINTF(X)
|
|
#define DPRINTF2(X)
|
|
#define IFF_DUMPPKTS(_ifp) 0
|
|
#endif
|
|
|
|
#define WI_INTRS (WI_EV_RX | WI_EV_ALLOC | WI_EV_INFO)
|
|
|
|
struct wi_card_ident
|
|
wi_card_ident[] = {
|
|
/* CARD_ID CARD_NAME FIRM_TYPE */
|
|
{ WI_NIC_LUCENT_ID, WI_NIC_LUCENT_STR, WI_LUCENT },
|
|
{ WI_NIC_SONY_ID, WI_NIC_SONY_STR, WI_LUCENT },
|
|
{ WI_NIC_LUCENT_EMB_ID, WI_NIC_LUCENT_EMB_STR, WI_LUCENT },
|
|
{ WI_NIC_EVB2_ID, WI_NIC_EVB2_STR, WI_INTERSIL },
|
|
{ WI_NIC_HWB3763_ID, WI_NIC_HWB3763_STR, WI_INTERSIL },
|
|
{ WI_NIC_HWB3163_ID, WI_NIC_HWB3163_STR, WI_INTERSIL },
|
|
{ WI_NIC_HWB3163B_ID, WI_NIC_HWB3163B_STR, WI_INTERSIL },
|
|
{ WI_NIC_EVB3_ID, WI_NIC_EVB3_STR, WI_INTERSIL },
|
|
{ WI_NIC_HWB1153_ID, WI_NIC_HWB1153_STR, WI_INTERSIL },
|
|
{ WI_NIC_P2_SST_ID, WI_NIC_P2_SST_STR, WI_INTERSIL },
|
|
{ WI_NIC_EVB2_SST_ID, WI_NIC_EVB2_SST_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_EVA_ID, WI_NIC_3842_EVA_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_PCMCIA_AMD_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_PCMCIA_SST_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_PCMCIA_ATM_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_MINI_AMD_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_MINI_SST_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_MINI_ATM_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_PCI_AMD_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_PCI_SST_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
|
|
{ WI_NIC_3842_PCI_ATM_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
|
|
{ WI_NIC_P3_PCMCIA_AMD_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
|
|
{ WI_NIC_P3_PCMCIA_SST_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
|
|
{ WI_NIC_P3_MINI_AMD_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
|
|
{ WI_NIC_P3_MINI_SST_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
|
|
{ 0, NULL, 0 },
|
|
};
|
|
|
|
int
|
|
wi_attach(struct wi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
int chan, i, nrate, buflen;
|
|
u_int16_t val;
|
|
u_int8_t ratebuf[2 + IEEE80211_RATE_SIZE];
|
|
static const u_int8_t empty_macaddr[IEEE80211_ADDR_LEN] = {
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
int s;
|
|
|
|
s = splnet();
|
|
|
|
/* Make sure interrupts are disabled. */
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, ~0);
|
|
|
|
sc->sc_invalid = 0;
|
|
|
|
/* Reset the NIC. */
|
|
if (wi_reset(sc) != 0) {
|
|
sc->sc_invalid = 1;
|
|
splx(s);
|
|
return 1;
|
|
}
|
|
|
|
buflen = IEEE80211_ADDR_LEN;
|
|
if (wi_read_rid(sc, WI_RID_MAC_NODE, ic->ic_myaddr, &buflen) != 0 ||
|
|
IEEE80211_ADDR_EQ(ic->ic_myaddr, empty_macaddr)) {
|
|
printf(" could not get mac address, attach failed\n");
|
|
splx(s);
|
|
return 1;
|
|
}
|
|
|
|
printf(" 802.11 address %s\n", ether_sprintf(ic->ic_myaddr));
|
|
|
|
/* Read NIC identification */
|
|
wi_read_nicid(sc);
|
|
|
|
memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);
|
|
ifp->if_softc = sc;
|
|
ifp->if_start = wi_start;
|
|
ifp->if_ioctl = wi_ioctl;
|
|
ifp->if_watchdog = wi_watchdog;
|
|
ifp->if_init = wi_init;
|
|
ifp->if_stop = wi_stop;
|
|
ifp->if_flags =
|
|
IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST | IFF_NOTRAILERS;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
ic->ic_phytype = IEEE80211_T_DS;
|
|
ic->ic_opmode = IEEE80211_M_STA;
|
|
ic->ic_caps = IEEE80211_C_PMGT | IEEE80211_C_AHDEMO;
|
|
ic->ic_state = IEEE80211_S_INIT;
|
|
ic->ic_max_aid = WI_MAX_AID;
|
|
|
|
/* Find available channel */
|
|
buflen = sizeof(val);
|
|
if (wi_read_rid(sc, WI_RID_CHANNEL_LIST, &val, &buflen) != 0)
|
|
val = htole16(0x1fff); /* assume 1-11 */
|
|
for (i = 0; i < 16; i++) {
|
|
chan = i + 1;
|
|
if (isset((u_int8_t*)&val, i))
|
|
setbit(ic->ic_chan_avail, chan);
|
|
ic->ic_channels[chan].ic_freq =
|
|
ieee80211_ieee2mhz(chan, IEEE80211_CHAN_2GHZ);
|
|
ic->ic_channels[chan].ic_flags = IEEE80211_CHAN_B;
|
|
}
|
|
|
|
if (sc->sc_firmware_type == WI_LUCENT) {
|
|
sc->sc_dbm_offset = WI_LUCENT_DBM_OFFSET;
|
|
} else {
|
|
buflen = sizeof(val);
|
|
if ((sc->sc_flags & WI_FLAGS_HAS_DBMADJUST) &&
|
|
wi_read_rid(sc, WI_RID_DBM_ADJUST, &val, &buflen) == 0)
|
|
sc->sc_dbm_offset = le16toh(val);
|
|
else
|
|
sc->sc_dbm_offset = WI_PRISM_DBM_OFFSET;
|
|
}
|
|
|
|
/* Find default IBSS channel */
|
|
buflen = sizeof(val);
|
|
if (wi_read_rid(sc, WI_RID_OWN_CHNL, &val, &buflen) == 0)
|
|
chan = le16toh(val);
|
|
else {
|
|
/* use lowest available channel */
|
|
for (chan = 0; chan < 16; chan++) {
|
|
if (isset(ic->ic_chan_avail, chan))
|
|
break;
|
|
}
|
|
}
|
|
if (!isset(ic->ic_chan_avail, chan))
|
|
panic("%s: no available channel\n", sc->sc_dev.dv_xname);
|
|
|
|
ic->ic_ibss_chan = &ic->ic_channels[chan];
|
|
|
|
/*
|
|
* Set flags based on firmware version.
|
|
*/
|
|
switch (sc->sc_firmware_type) {
|
|
case WI_LUCENT:
|
|
sc->sc_flags |= WI_FLAGS_HAS_SYSSCALE;
|
|
#ifdef WI_HERMES_AUTOINC_WAR
|
|
/* XXX: not confirmed, but never seen for recent firmware */
|
|
if (sc->sc_sta_firmware_ver < 40000) {
|
|
sc->sc_flags |= WI_FLAGS_BUG_AUTOINC;
|
|
}
|
|
#endif
|
|
if (sc->sc_sta_firmware_ver >= 60000)
|
|
sc->sc_flags |= WI_FLAGS_HAS_MOR;
|
|
if (sc->sc_sta_firmware_ver >= 60006) {
|
|
ic->ic_caps |= IEEE80211_C_IBSS;
|
|
ic->ic_caps |= IEEE80211_C_MONITOR;
|
|
}
|
|
sc->sc_ibss_port = 1;
|
|
break;
|
|
|
|
case WI_INTERSIL:
|
|
sc->sc_flags |= WI_FLAGS_HAS_FRAGTHR;
|
|
sc->sc_flags |= WI_FLAGS_HAS_ROAMING;
|
|
sc->sc_flags |= WI_FLAGS_HAS_SYSSCALE;
|
|
if (sc->sc_sta_firmware_ver > 10101)
|
|
sc->sc_flags |= WI_FLAGS_HAS_DBMADJUST;
|
|
if (sc->sc_sta_firmware_ver >= 800) {
|
|
if (sc->sc_sta_firmware_ver != 10402)
|
|
ic->ic_caps |= IEEE80211_C_HOSTAP;
|
|
ic->ic_caps |= IEEE80211_C_IBSS;
|
|
ic->ic_caps |= IEEE80211_C_MONITOR;
|
|
}
|
|
sc->sc_ibss_port = 0;
|
|
break;
|
|
|
|
case WI_SYMBOL:
|
|
sc->sc_flags |= WI_FLAGS_HAS_DIVERSITY;
|
|
if (sc->sc_sta_firmware_ver >= 20000)
|
|
ic->ic_caps |= IEEE80211_C_IBSS;
|
|
sc->sc_ibss_port = 4;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Find out if we support WEP on this card.
|
|
*/
|
|
buflen = sizeof(val);
|
|
if (wi_read_rid(sc, WI_RID_WEP_AVAIL, &val, &buflen) == 0 &&
|
|
val != htole16(0))
|
|
ic->ic_caps |= IEEE80211_C_WEP;
|
|
|
|
/* Find supported rates. */
|
|
buflen = sizeof(ratebuf);
|
|
if (wi_read_rid(sc, WI_RID_DATA_RATES, ratebuf, &buflen) == 0) {
|
|
nrate = le16toh(*(u_int16_t *)ratebuf);
|
|
if (nrate > IEEE80211_RATE_SIZE)
|
|
nrate = IEEE80211_RATE_SIZE;
|
|
memcpy(ic->ic_sup_rates[IEEE80211_MODE_11B].rs_rates,
|
|
ratebuf + 2, nrate);
|
|
ic->ic_sup_rates[IEEE80211_MODE_11B].rs_nrates = nrate;
|
|
}
|
|
buflen = sizeof(val);
|
|
|
|
sc->sc_max_datalen = 2304;
|
|
sc->sc_rts_thresh = 2347;
|
|
sc->sc_frag_thresh = 2346;
|
|
sc->sc_system_scale = 1;
|
|
sc->sc_cnfauthmode = IEEE80211_AUTH_OPEN;
|
|
sc->sc_roaming_mode = 1;
|
|
|
|
/*
|
|
* Call MI attach routines.
|
|
*/
|
|
if_attach(ifp);
|
|
ieee80211_ifattach(ifp);
|
|
|
|
sc->sc_newstate = ic->ic_newstate;
|
|
ic->ic_newstate = wi_newstate;
|
|
ic->ic_set_tim = wi_set_tim;
|
|
|
|
ieee80211_media_init(ifp, wi_media_change, wi_media_status);
|
|
|
|
/* Attach is successful. */
|
|
sc->sc_attached = 1;
|
|
|
|
splx(s);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
wi_detach(struct wi_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ic.ic_if;
|
|
int s;
|
|
|
|
if (!sc->sc_attached)
|
|
return 0;
|
|
|
|
s = splnet();
|
|
|
|
sc->sc_invalid = 1;
|
|
wi_stop(ifp, 1);
|
|
|
|
/* Delete all remaining media. */
|
|
ifmedia_delete_instance(&sc->sc_ic.ic_media, IFM_INST_ANY);
|
|
|
|
ieee80211_ifdetach(ifp);
|
|
if_detach(ifp);
|
|
splx(s);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef __NetBSD__
|
|
int
|
|
wi_activate(struct device *self, enum devact act)
|
|
{
|
|
struct wi_softc *sc = (struct wi_softc *)self;
|
|
int rv = 0, s;
|
|
|
|
s = splnet();
|
|
switch (act) {
|
|
case DVACT_ACTIVATE:
|
|
rv = EOPNOTSUPP;
|
|
break;
|
|
|
|
case DVACT_DEACTIVATE:
|
|
if_deactivate(&sc->sc_ic.ic_if);
|
|
break;
|
|
}
|
|
splx(s);
|
|
return rv;
|
|
}
|
|
|
|
void
|
|
wi_power(struct wi_softc *sc, int why)
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ic.ic_if;
|
|
int s;
|
|
|
|
s = splnet();
|
|
switch (why) {
|
|
case PWR_SUSPEND:
|
|
case PWR_STANDBY:
|
|
wi_stop(ifp, 1);
|
|
break;
|
|
case PWR_RESUME:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
wi_init(ifp);
|
|
(void)wi_intr(sc);
|
|
}
|
|
break;
|
|
case PWR_SOFTSUSPEND:
|
|
case PWR_SOFTSTANDBY:
|
|
case PWR_SOFTRESUME:
|
|
break;
|
|
}
|
|
splx(s);
|
|
}
|
|
#endif /* __NetBSD__ */
|
|
|
|
void
|
|
wi_shutdown(struct wi_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ic.ic_if;
|
|
|
|
if (sc->sc_attached)
|
|
wi_stop(ifp, 1);
|
|
}
|
|
|
|
int
|
|
wi_intr(void *arg)
|
|
{
|
|
int i;
|
|
struct wi_softc *sc = arg;
|
|
struct ifnet *ifp = &sc->sc_ic.ic_if;
|
|
u_int16_t status;
|
|
|
|
if (sc->sc_enabled == 0 ||
|
|
(sc->sc_dev.dv_flags & DVF_ACTIVE) == 0 ||
|
|
(ifp->if_flags & IFF_RUNNING) == 0)
|
|
return 0;
|
|
|
|
if ((ifp->if_flags & IFF_UP) == 0) {
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, ~0);
|
|
return 1;
|
|
}
|
|
|
|
/* This is superfluous on Prism, but Lucent breaks if we
|
|
* do not disable interrupts.
|
|
*/
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
|
|
|
/* maximum 10 loops per interrupt */
|
|
for (i = 0; i < 10; i++) {
|
|
/*
|
|
* Only believe a status bit when we enter wi_intr, or when
|
|
* the bit was "off" the last time through the loop. This is
|
|
* my strategy to avoid racing the hardware/firmware if I
|
|
* can re-read the event status register more quickly than
|
|
* it is updated.
|
|
*/
|
|
status = CSR_READ_2(sc, WI_EVENT_STAT);
|
|
if ((status & WI_INTRS) == 0)
|
|
break;
|
|
|
|
if (status & WI_EV_RX)
|
|
wi_rx_intr(sc);
|
|
|
|
if (status & WI_EV_ALLOC)
|
|
wi_tx_intr(sc);
|
|
|
|
if (status & WI_EV_TX_EXC)
|
|
wi_tx_ex_intr(sc);
|
|
|
|
if (status & WI_EV_INFO)
|
|
wi_info_intr(sc);
|
|
|
|
if ((ifp->if_flags & IFF_OACTIVE) == 0 &&
|
|
(sc->sc_flags & WI_FLAGS_OUTRANGE) == 0 &&
|
|
!IFQ_IS_EMPTY(&ifp->if_snd))
|
|
wi_start(ifp);
|
|
}
|
|
|
|
/* re-enable interrupts */
|
|
CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
wi_init(struct ifnet *ifp)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct wi_joinreq join;
|
|
int i;
|
|
int error = 0, wasenabled;
|
|
|
|
DPRINTF(("wi_init: enabled %d\n", sc->sc_enabled));
|
|
wasenabled = sc->sc_enabled;
|
|
if (!sc->sc_enabled) {
|
|
if ((error = (*sc->sc_enable)(sc)) != 0)
|
|
goto out;
|
|
sc->sc_enabled = 1;
|
|
} else
|
|
wi_stop(ifp, 0);
|
|
|
|
/* Symbol firmware cannot be initialized more than once */
|
|
if (sc->sc_firmware_type != WI_SYMBOL || !wasenabled)
|
|
if ((error = wi_reset(sc)) != 0)
|
|
goto out;
|
|
|
|
/* common 802.11 configuration */
|
|
ic->ic_flags &= ~IEEE80211_F_IBSSON;
|
|
sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
|
|
switch (ic->ic_opmode) {
|
|
case IEEE80211_M_STA:
|
|
wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_BSS);
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
wi_write_val(sc, WI_RID_PORTTYPE, sc->sc_ibss_port);
|
|
ic->ic_flags |= IEEE80211_F_IBSSON;
|
|
sc->sc_syn_timer = 5;
|
|
ifp->if_timer = 1;
|
|
break;
|
|
case IEEE80211_M_AHDEMO:
|
|
wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_ADHOC);
|
|
break;
|
|
case IEEE80211_M_HOSTAP:
|
|
wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_HOSTAP);
|
|
break;
|
|
case IEEE80211_M_MONITOR:
|
|
if (sc->sc_firmware_type == WI_LUCENT)
|
|
wi_write_val(sc, WI_RID_PORTTYPE, WI_PORTTYPE_ADHOC);
|
|
wi_cmd(sc, WI_CMD_TEST | (WI_TEST_MONITOR << 8), 0, 0, 0);
|
|
break;
|
|
}
|
|
|
|
/* Intersil interprets this RID as joining ESS even in IBSS mode */
|
|
if (sc->sc_firmware_type == WI_LUCENT &&
|
|
(ic->ic_flags & IEEE80211_F_IBSSON) && ic->ic_des_esslen > 0)
|
|
wi_write_val(sc, WI_RID_CREATE_IBSS, 1);
|
|
else
|
|
wi_write_val(sc, WI_RID_CREATE_IBSS, 0);
|
|
wi_write_val(sc, WI_RID_MAX_SLEEP, ic->ic_lintval);
|
|
wi_write_ssid(sc, WI_RID_DESIRED_SSID, ic->ic_des_essid,
|
|
ic->ic_des_esslen);
|
|
wi_write_val(sc, WI_RID_OWN_CHNL,
|
|
ieee80211_chan2ieee(ic, ic->ic_ibss_chan));
|
|
wi_write_ssid(sc, WI_RID_OWN_SSID, ic->ic_des_essid, ic->ic_des_esslen);
|
|
IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl));
|
|
wi_write_rid(sc, WI_RID_MAC_NODE, ic->ic_myaddr, IEEE80211_ADDR_LEN);
|
|
wi_write_val(sc, WI_RID_PM_ENABLED,
|
|
(ic->ic_flags & IEEE80211_F_PMGTON) ? 1 : 0);
|
|
|
|
/* not yet common 802.11 configuration */
|
|
wi_write_val(sc, WI_RID_MAX_DATALEN, sc->sc_max_datalen);
|
|
wi_write_val(sc, WI_RID_RTS_THRESH, sc->sc_rts_thresh);
|
|
if (sc->sc_flags & WI_FLAGS_HAS_FRAGTHR)
|
|
wi_write_val(sc, WI_RID_FRAG_THRESH, sc->sc_frag_thresh);
|
|
|
|
/* driver specific 802.11 configuration */
|
|
if (sc->sc_flags & WI_FLAGS_HAS_SYSSCALE)
|
|
wi_write_val(sc, WI_RID_SYSTEM_SCALE, sc->sc_system_scale);
|
|
if (sc->sc_flags & WI_FLAGS_HAS_ROAMING)
|
|
wi_write_val(sc, WI_RID_ROAMING_MODE, sc->sc_roaming_mode);
|
|
if (sc->sc_flags & WI_FLAGS_HAS_MOR)
|
|
wi_write_val(sc, WI_RID_MICROWAVE_OVEN, sc->sc_microwave_oven);
|
|
wi_cfg_txrate(sc);
|
|
wi_write_ssid(sc, WI_RID_NODENAME, sc->sc_nodename, sc->sc_nodelen);
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
|
|
sc->sc_firmware_type == WI_INTERSIL) {
|
|
wi_write_val(sc, WI_RID_OWN_BEACON_INT, ic->ic_lintval);
|
|
wi_write_val(sc, WI_RID_BASIC_RATE, 0x03); /* 1, 2 */
|
|
wi_write_val(sc, WI_RID_SUPPORT_RATE, 0x0f); /* 1, 2, 5.5, 11 */
|
|
wi_write_val(sc, WI_RID_DTIM_PERIOD, 1);
|
|
}
|
|
|
|
/*
|
|
* Initialize promisc mode.
|
|
* Being in the Host-AP mode causes a great
|
|
* deal of pain if primisc mode is set.
|
|
* Therefore we avoid confusing the firmware
|
|
* and always reset promisc mode in Host-AP
|
|
* mode. Host-AP sees all the packets anyway.
|
|
*/
|
|
if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
|
|
(ifp->if_flags & IFF_PROMISC) != 0) {
|
|
wi_write_val(sc, WI_RID_PROMISC, 1);
|
|
} else {
|
|
wi_write_val(sc, WI_RID_PROMISC, 0);
|
|
}
|
|
|
|
/* Configure WEP. */
|
|
if (ic->ic_caps & IEEE80211_C_WEP)
|
|
wi_write_wep(sc);
|
|
|
|
/* Set multicast filter. */
|
|
wi_write_multi(sc);
|
|
|
|
if (sc->sc_firmware_type != WI_SYMBOL || !wasenabled) {
|
|
sc->sc_buflen = IEEE80211_MAX_LEN + sizeof(struct wi_frame);
|
|
if (sc->sc_firmware_type == WI_SYMBOL)
|
|
sc->sc_buflen = 1585; /* XXX */
|
|
for (i = 0; i < WI_NTXBUF; i++) {
|
|
error = wi_alloc_fid(sc, sc->sc_buflen,
|
|
&sc->sc_txd[i].d_fid);
|
|
if (error) {
|
|
printf("%s: tx buffer allocation failed\n",
|
|
sc->sc_dev.dv_xname);
|
|
goto out;
|
|
}
|
|
DPRINTF2(("wi_init: txbuf %d allocated %x\n", i,
|
|
sc->sc_txd[i].d_fid));
|
|
sc->sc_txd[i].d_len = 0;
|
|
}
|
|
}
|
|
sc->sc_txcur = sc->sc_txnext = 0;
|
|
|
|
/* Enable desired port */
|
|
wi_cmd(sc, WI_CMD_ENABLE | sc->sc_portnum, 0, 0, 0);
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ic->ic_state = IEEE80211_S_INIT;
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_AHDEMO ||
|
|
ic->ic_opmode == IEEE80211_M_MONITOR ||
|
|
ic->ic_opmode == IEEE80211_M_HOSTAP)
|
|
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
|
|
|
|
/* Enable interrupts */
|
|
CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS);
|
|
|
|
if (!wasenabled &&
|
|
ic->ic_opmode == IEEE80211_M_HOSTAP &&
|
|
sc->sc_firmware_type == WI_INTERSIL) {
|
|
/* XXX: some card need to be re-enabled for hostap */
|
|
wi_cmd(sc, WI_CMD_DISABLE | WI_PORT0, 0, 0, 0);
|
|
wi_cmd(sc, WI_CMD_ENABLE | WI_PORT0, 0, 0, 0);
|
|
}
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_STA &&
|
|
((ic->ic_flags & IEEE80211_F_DESBSSID) ||
|
|
ic->ic_des_chan != IEEE80211_CHAN_ANYC)) {
|
|
memset(&join, 0, sizeof(join));
|
|
if (ic->ic_flags & IEEE80211_F_DESBSSID)
|
|
IEEE80211_ADDR_COPY(&join.wi_bssid, ic->ic_des_bssid);
|
|
if (ic->ic_des_chan != IEEE80211_CHAN_ANYC)
|
|
join.wi_chan =
|
|
htole16(ieee80211_chan2ieee(ic, ic->ic_des_chan));
|
|
/* Lucent firmware does not support the JOIN RID. */
|
|
if (sc->sc_firmware_type != WI_LUCENT)
|
|
wi_write_rid(sc, WI_RID_JOIN_REQ, &join, sizeof(join));
|
|
}
|
|
|
|
out:
|
|
if (error) {
|
|
printf("%s: interface not running\n", sc->sc_dev.dv_xname);
|
|
wi_stop(ifp, 0);
|
|
}
|
|
DPRINTF(("wi_init: return %d\n", error));
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
wi_stop(struct ifnet *ifp, int disable)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
int s;
|
|
|
|
if (!sc->sc_enabled)
|
|
return;
|
|
|
|
s = splnet();
|
|
|
|
DPRINTF(("wi_stop: disable %d\n", disable));
|
|
|
|
ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
|
|
if (!sc->sc_invalid) {
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
|
wi_cmd(sc, WI_CMD_DISABLE | sc->sc_portnum, 0, 0, 0);
|
|
}
|
|
|
|
sc->sc_tx_timer = 0;
|
|
sc->sc_scan_timer = 0;
|
|
sc->sc_syn_timer = 0;
|
|
sc->sc_false_syns = 0;
|
|
sc->sc_naps = 0;
|
|
ifp->if_flags &= ~(IFF_OACTIVE | IFF_RUNNING);
|
|
ifp->if_timer = 0;
|
|
|
|
if (disable) {
|
|
if (sc->sc_disable)
|
|
(*sc->sc_disable)(sc);
|
|
sc->sc_enabled = 0;
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
wi_start(struct ifnet *ifp)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211_node *ni;
|
|
struct ieee80211_frame *wh;
|
|
struct mbuf *m0;
|
|
struct wi_frame frmhdr;
|
|
int cur, fid, off;
|
|
|
|
if (!sc->sc_enabled || sc->sc_invalid)
|
|
return;
|
|
if (sc->sc_flags & WI_FLAGS_OUTRANGE)
|
|
return;
|
|
|
|
memset(&frmhdr, 0, sizeof(frmhdr));
|
|
cur = sc->sc_txnext;
|
|
for (;;) {
|
|
ni = ic->ic_bss;
|
|
if (!IF_IS_EMPTY(&ic->ic_mgtq)) {
|
|
if (sc->sc_txd[cur].d_len != 0) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
IF_DEQUEUE(&ic->ic_mgtq, m0);
|
|
m_copydata(m0, 4, ETHER_ADDR_LEN * 2,
|
|
(caddr_t)&frmhdr.wi_ehdr);
|
|
frmhdr.wi_ehdr.ether_type = 0;
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
/* TBD set ni = m0->m_pkthdr.rcvif */
|
|
} else if (!IF_IS_EMPTY(&ic->ic_pwrsaveq)) {
|
|
struct llc *llc;
|
|
|
|
/*
|
|
* Should these packets be processed after the
|
|
* regular packets or before? Since they are being
|
|
* probed for, they are probably less time critical
|
|
* than other packets, but, on the other hand,
|
|
* we want the power saving nodes to go back to
|
|
* sleep as quickly as possible to save power...
|
|
*/
|
|
|
|
if (ic->ic_state != IEEE80211_S_RUN)
|
|
break;
|
|
|
|
if (sc->sc_txd[cur].d_len != 0) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
IF_DEQUEUE(&ic->ic_pwrsaveq, m0);
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
llc = (struct llc *) (wh + 1);
|
|
m_copydata(m0, 4, ETHER_ADDR_LEN * 2,
|
|
(caddr_t)&frmhdr.wi_ehdr);
|
|
frmhdr.wi_ehdr.ether_type = llc->llc_snap.ether_type;
|
|
/* TBD set ni = m0->m_pkthdr.rcvif */
|
|
} else {
|
|
if (ic->ic_state != IEEE80211_S_RUN) {
|
|
break;
|
|
}
|
|
IFQ_POLL(&ifp->if_snd, m0);
|
|
if (m0 == NULL) {
|
|
break;
|
|
}
|
|
if (sc->sc_txd[cur].d_len != 0) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
IFQ_DEQUEUE(&ifp->if_snd, m0);
|
|
ifp->if_opackets++;
|
|
m_copydata(m0, 0, ETHER_HDR_LEN,
|
|
(caddr_t)&frmhdr.wi_ehdr);
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp->if_bpf, m0);
|
|
#endif
|
|
|
|
if ((m0 = ieee80211_encap(ifp, m0, &ni)) == NULL) {
|
|
ifp->if_oerrors++;
|
|
continue;
|
|
}
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
if (ic->ic_flags & IEEE80211_F_WEPON)
|
|
wh->i_fc[1] |= IEEE80211_FC1_WEP;
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
|
|
!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
|
|
(wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
|
|
IEEE80211_FC0_TYPE_DATA) {
|
|
if (ni->ni_associd == 0) {
|
|
m_freem(m0);
|
|
ifp->if_oerrors++;
|
|
goto next;
|
|
}
|
|
if (ni->ni_pwrsave & IEEE80211_PS_SLEEP) {
|
|
ieee80211_pwrsave(ic, ni, m0);
|
|
goto next;
|
|
}
|
|
}
|
|
}
|
|
#if NBPFILTER > 0
|
|
if (ic->ic_rawbpf)
|
|
bpf_mtap(ic->ic_rawbpf, m0);
|
|
#endif
|
|
frmhdr.wi_tx_ctl = htole16(WI_ENC_TX_802_11|WI_TXCNTL_TX_EX);
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP &&
|
|
(wh->i_fc[1] & IEEE80211_FC1_WEP)) {
|
|
if ((m0 = ieee80211_wep_crypt(ifp, m0, 1)) == NULL) {
|
|
ifp->if_oerrors++;
|
|
goto next;
|
|
}
|
|
frmhdr.wi_tx_ctl |= htole16(WI_TXCNTL_NOCRYPT);
|
|
}
|
|
#if NBPFILTER > 0
|
|
if (sc->sc_drvbpf) {
|
|
struct mbuf mb;
|
|
|
|
M_COPY_PKTHDR(&mb, m0);
|
|
mb.m_data = (caddr_t)&frmhdr;
|
|
mb.m_len = sizeof(frmhdr);
|
|
mb.m_next = m0;
|
|
mb.m_pkthdr.len += mb.m_len;
|
|
bpf_mtap(sc->sc_drvbpf, &mb);
|
|
}
|
|
#endif
|
|
m_copydata(m0, 0, sizeof(struct ieee80211_frame),
|
|
(caddr_t)&frmhdr.wi_whdr);
|
|
m_adj(m0, sizeof(struct ieee80211_frame));
|
|
frmhdr.wi_dat_len = htole16(m0->m_pkthdr.len);
|
|
if (IFF_DUMPPKTS(ifp))
|
|
wi_dump_pkt(&frmhdr, ni, -1);
|
|
fid = sc->sc_txd[cur].d_fid;
|
|
off = sizeof(frmhdr);
|
|
if (wi_write_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr)) != 0 ||
|
|
wi_mwrite_bap(sc, fid, off, m0, m0->m_pkthdr.len) != 0) {
|
|
ifp->if_oerrors++;
|
|
m_freem(m0);
|
|
goto next;
|
|
}
|
|
m_freem(m0);
|
|
sc->sc_txd[cur].d_len = off;
|
|
if (sc->sc_txcur == cur) {
|
|
if (wi_cmd(sc, WI_CMD_TX | WI_RECLAIM, fid, 0, 0)) {
|
|
printf("%s: xmit failed\n",
|
|
sc->sc_dev.dv_xname);
|
|
sc->sc_txd[cur].d_len = 0;
|
|
goto next;
|
|
}
|
|
sc->sc_tx_timer = 5;
|
|
ifp->if_timer = 1;
|
|
}
|
|
sc->sc_txnext = cur = (cur + 1) % WI_NTXBUF;
|
|
next:
|
|
if (ni != NULL && ni != ic->ic_bss)
|
|
ieee80211_free_node(ic, ni);
|
|
}
|
|
}
|
|
|
|
|
|
static int
|
|
wi_reset(struct wi_softc *sc)
|
|
{
|
|
int i, error;
|
|
|
|
DPRINTF(("wi_reset\n"));
|
|
|
|
if (sc->sc_reset)
|
|
(*sc->sc_reset)(sc);
|
|
|
|
error = 0;
|
|
for (i = 0; i < 5; i++) {
|
|
DELAY(20*1000); /* XXX: way too long! */
|
|
if ((error = wi_cmd(sc, WI_CMD_INI, 0, 0, 0)) == 0)
|
|
break;
|
|
}
|
|
if (error) {
|
|
printf("%s: init failed\n", sc->sc_dev.dv_xname);
|
|
return error;
|
|
}
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, ~0);
|
|
|
|
/* Calibrate timer. */
|
|
wi_write_val(sc, WI_RID_TICK_TIME, 0);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
wi_watchdog(struct ifnet *ifp)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
ifp->if_timer = 0;
|
|
if (!sc->sc_enabled)
|
|
return;
|
|
|
|
if (sc->sc_tx_timer) {
|
|
if (--sc->sc_tx_timer == 0) {
|
|
printf("%s: device timeout\n", ifp->if_xname);
|
|
ifp->if_oerrors++;
|
|
wi_init(ifp);
|
|
return;
|
|
}
|
|
ifp->if_timer = 1;
|
|
}
|
|
|
|
if (sc->sc_scan_timer) {
|
|
if (--sc->sc_scan_timer <= WI_SCAN_WAIT - WI_SCAN_INQWAIT &&
|
|
sc->sc_firmware_type == WI_INTERSIL) {
|
|
DPRINTF(("wi_watchdog: inquire scan\n"));
|
|
wi_cmd(sc, WI_CMD_INQUIRE, WI_INFO_SCAN_RESULTS, 0, 0);
|
|
}
|
|
if (sc->sc_scan_timer)
|
|
ifp->if_timer = 1;
|
|
}
|
|
|
|
if (sc->sc_syn_timer) {
|
|
if (--sc->sc_syn_timer == 0) {
|
|
DPRINTF2(("%s: %d false syns\n",
|
|
sc->sc_dev.dv_xname, sc->sc_false_syns));
|
|
sc->sc_false_syns = 0;
|
|
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
|
|
sc->sc_syn_timer = 5;
|
|
}
|
|
ifp->if_timer = 1;
|
|
}
|
|
|
|
/* TODO: rate control */
|
|
ieee80211_watchdog(ifp);
|
|
}
|
|
|
|
static int
|
|
wi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int s, error = 0;
|
|
|
|
if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
|
|
return ENXIO;
|
|
|
|
s = splnet();
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFFLAGS:
|
|
/*
|
|
* Can't do promisc and hostap at the same time. If all that's
|
|
* changing is the promisc flag, try to short-circuit a call to
|
|
* wi_init() by just setting PROMISC in the hardware.
|
|
*/
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (sc->sc_enabled) {
|
|
if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
|
|
(ifp->if_flags & IFF_PROMISC) != 0)
|
|
wi_write_val(sc, WI_RID_PROMISC, 1);
|
|
else
|
|
wi_write_val(sc, WI_RID_PROMISC, 0);
|
|
} else
|
|
error = wi_init(ifp);
|
|
} else if (sc->sc_enabled)
|
|
wi_stop(ifp, 1);
|
|
break;
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
error = (cmd == SIOCADDMULTI) ?
|
|
ether_addmulti(ifr, &sc->sc_ic.ic_ec) :
|
|
ether_delmulti(ifr, &sc->sc_ic.ic_ec);
|
|
if (error == ENETRESET) {
|
|
if (sc->sc_enabled) {
|
|
/* do not rescan */
|
|
error = wi_write_multi(sc);
|
|
} else
|
|
error = 0;
|
|
}
|
|
break;
|
|
case SIOCGIFGENERIC:
|
|
error = wi_get_cfg(ifp, cmd, data);
|
|
break;
|
|
case SIOCSIFGENERIC:
|
|
error = suser(curproc->p_ucred, &curproc->p_acflag);
|
|
if (error)
|
|
break;
|
|
error = wi_set_cfg(ifp, cmd, data);
|
|
if (error == ENETRESET) {
|
|
if (sc->sc_enabled)
|
|
error = wi_init(ifp);
|
|
else
|
|
error = 0;
|
|
}
|
|
break;
|
|
case SIOCS80211BSSID:
|
|
if (sc->sc_firmware_type == WI_LUCENT) {
|
|
error = ENODEV;
|
|
break;
|
|
}
|
|
/* fall through */
|
|
default:
|
|
error = ieee80211_ioctl(ifp, cmd, data);
|
|
if (error == ENETRESET) {
|
|
if (sc->sc_enabled)
|
|
error = wi_init(ifp);
|
|
else
|
|
error = 0;
|
|
}
|
|
break;
|
|
}
|
|
splx(s);
|
|
return error;
|
|
}
|
|
|
|
/* TBD factor with ieee80211_media_change */
|
|
static int
|
|
wi_media_change(struct ifnet *ifp)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifmedia_entry *ime;
|
|
enum ieee80211_opmode newmode;
|
|
int i, rate, error = 0;
|
|
|
|
ime = ic->ic_media.ifm_cur;
|
|
if (IFM_SUBTYPE(ime->ifm_media) == IFM_AUTO) {
|
|
i = -1;
|
|
} else {
|
|
struct ieee80211_rateset *rs =
|
|
&ic->ic_sup_rates[ieee80211_chan2mode(ic,
|
|
ic->ic_bss->ni_chan)];
|
|
rate = ieee80211_media2rate(ime->ifm_media);
|
|
if (rate == 0)
|
|
return EINVAL;
|
|
for (i = 0; i < rs->rs_nrates; i++) {
|
|
if ((rs->rs_rates[i] & IEEE80211_RATE_VAL) == rate)
|
|
break;
|
|
}
|
|
if (i == rs->rs_nrates)
|
|
return EINVAL;
|
|
}
|
|
if (ic->ic_fixed_rate != i) {
|
|
ic->ic_fixed_rate = i;
|
|
error = ENETRESET;
|
|
}
|
|
|
|
if ((ime->ifm_media & IFM_IEEE80211_ADHOC) &&
|
|
(ime->ifm_media & IFM_FLAG0))
|
|
newmode = IEEE80211_M_AHDEMO;
|
|
else if (ime->ifm_media & IFM_IEEE80211_ADHOC)
|
|
newmode = IEEE80211_M_IBSS;
|
|
else if (ime->ifm_media & IFM_IEEE80211_HOSTAP)
|
|
newmode = IEEE80211_M_HOSTAP;
|
|
else if (ime->ifm_media & IFM_IEEE80211_MONITOR)
|
|
newmode = IEEE80211_M_MONITOR;
|
|
else
|
|
newmode = IEEE80211_M_STA;
|
|
if (ic->ic_opmode != newmode) {
|
|
ic->ic_opmode = newmode;
|
|
error = ENETRESET;
|
|
}
|
|
if (error == ENETRESET) {
|
|
if (sc->sc_enabled)
|
|
error = wi_init(ifp);
|
|
else
|
|
error = 0;
|
|
}
|
|
ifp->if_baudrate = ifmedia_baudrate(ic->ic_media.ifm_cur->ifm_media);
|
|
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
wi_media_status(struct ifnet *ifp, struct ifmediareq *imr)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
u_int16_t val;
|
|
int rate, len;
|
|
|
|
if (sc->sc_enabled == 0) {
|
|
imr->ifm_active = IFM_IEEE80211 | IFM_NONE;
|
|
imr->ifm_status = 0;
|
|
return;
|
|
}
|
|
|
|
imr->ifm_status = IFM_AVALID;
|
|
imr->ifm_active = IFM_IEEE80211;
|
|
if (ic->ic_state == IEEE80211_S_RUN &&
|
|
(sc->sc_flags & WI_FLAGS_OUTRANGE) == 0)
|
|
imr->ifm_status |= IFM_ACTIVE;
|
|
len = sizeof(val);
|
|
if (wi_read_rid(sc, WI_RID_CUR_TX_RATE, &val, &len) != 0)
|
|
rate = 0;
|
|
else {
|
|
/* convert to 802.11 rate */
|
|
rate = val * 2;
|
|
if (sc->sc_firmware_type == WI_LUCENT) {
|
|
if (rate == 10)
|
|
rate = 11; /* 5.5Mbps */
|
|
} else {
|
|
if (rate == 4*2)
|
|
rate = 11; /* 5.5Mbps */
|
|
else if (rate == 8*2)
|
|
rate = 22; /* 11Mbps */
|
|
}
|
|
}
|
|
imr->ifm_active |= ieee80211_rate2media(ic, rate, IEEE80211_MODE_11B);
|
|
switch (ic->ic_opmode) {
|
|
case IEEE80211_M_STA:
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
imr->ifm_active |= IFM_IEEE80211_ADHOC;
|
|
break;
|
|
case IEEE80211_M_AHDEMO:
|
|
imr->ifm_active |= IFM_IEEE80211_ADHOC | IFM_FLAG0;
|
|
break;
|
|
case IEEE80211_M_HOSTAP:
|
|
imr->ifm_active |= IFM_IEEE80211_HOSTAP;
|
|
break;
|
|
case IEEE80211_M_MONITOR:
|
|
imr->ifm_active |= IFM_IEEE80211_MONITOR;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
wi_sync_bssid(struct wi_softc *sc, u_int8_t new_bssid[IEEE80211_ADDR_LEN])
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211_node *ni = ic->ic_bss;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
|
|
if (IEEE80211_ADDR_EQ(new_bssid, ni->ni_bssid))
|
|
return;
|
|
|
|
DPRINTF(("wi_sync_bssid: bssid %s -> ", ether_sprintf(ni->ni_bssid)));
|
|
DPRINTF(("%s ?\n", ether_sprintf(new_bssid)));
|
|
|
|
/* In promiscuous mode, the BSSID field is not a reliable
|
|
* indicator of the firmware's BSSID. Damp spurious
|
|
* change-of-BSSID indications.
|
|
*/
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0 &&
|
|
sc->sc_false_syns >= WI_MAX_FALSE_SYNS)
|
|
return;
|
|
|
|
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
|
|
}
|
|
|
|
static void
|
|
wi_rx_intr(struct wi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
struct ieee80211_node *ni;
|
|
struct wi_frame frmhdr;
|
|
struct mbuf *m;
|
|
struct ieee80211_frame *wh;
|
|
int fid, len, off, rssi;
|
|
u_int8_t dir;
|
|
u_int16_t status;
|
|
u_int32_t rstamp;
|
|
|
|
fid = CSR_READ_2(sc, WI_RX_FID);
|
|
|
|
/* First read in the frame header */
|
|
if (wi_read_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr))) {
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
ifp->if_ierrors++;
|
|
DPRINTF(("wi_rx_intr: read fid %x failed\n", fid));
|
|
return;
|
|
}
|
|
|
|
if (IFF_DUMPPKTS(ifp))
|
|
wi_dump_pkt(&frmhdr, NULL, frmhdr.wi_rx_signal);
|
|
|
|
/*
|
|
* Drop undecryptable or packets with receive errors here
|
|
*/
|
|
status = le16toh(frmhdr.wi_status);
|
|
if (status & WI_STAT_ERRSTAT) {
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
ifp->if_ierrors++;
|
|
DPRINTF(("wi_rx_intr: fid %x error status %x\n", fid, status));
|
|
return;
|
|
}
|
|
rssi = frmhdr.wi_rx_signal;
|
|
rstamp = (le16toh(frmhdr.wi_rx_tstamp0) << 16) |
|
|
le16toh(frmhdr.wi_rx_tstamp1);
|
|
|
|
len = le16toh(frmhdr.wi_dat_len);
|
|
off = ALIGN(sizeof(struct ieee80211_frame));
|
|
|
|
/* Sometimes the PRISM2.x returns bogusly large frames. Except
|
|
* in monitor mode, just throw them away.
|
|
*/
|
|
if (off + len > MCLBYTES) {
|
|
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
ifp->if_ierrors++;
|
|
DPRINTF(("wi_rx_intr: oversized packet\n"));
|
|
return;
|
|
} else
|
|
len = 0;
|
|
}
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
ifp->if_ierrors++;
|
|
DPRINTF(("wi_rx_intr: MGET failed\n"));
|
|
return;
|
|
}
|
|
if (off + len > MHLEN) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
m_freem(m);
|
|
ifp->if_ierrors++;
|
|
DPRINTF(("wi_rx_intr: MCLGET failed\n"));
|
|
return;
|
|
}
|
|
}
|
|
|
|
m->m_data += off - sizeof(struct ieee80211_frame);
|
|
memcpy(m->m_data, &frmhdr.wi_whdr, sizeof(struct ieee80211_frame));
|
|
wi_read_bap(sc, fid, sizeof(frmhdr),
|
|
m->m_data + sizeof(struct ieee80211_frame), len);
|
|
m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame) + len;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
|
|
#if NBPFILTER > 0
|
|
if (sc->sc_drvbpf) {
|
|
struct mbuf mb;
|
|
|
|
M_COPY_PKTHDR(&mb, m);
|
|
mb.m_data = (caddr_t)&frmhdr;
|
|
frmhdr.wi_rx_signal = WI_RSSI_TO_DBM(sc, frmhdr.wi_rx_signal);
|
|
frmhdr.wi_rx_silence = WI_RSSI_TO_DBM(sc, frmhdr.wi_rx_silence);
|
|
mb.m_len = (char *)&frmhdr.wi_whdr - (char *)&frmhdr;
|
|
mb.m_next = m;
|
|
mb.m_pkthdr.len += mb.m_len;
|
|
bpf_mtap(sc->sc_drvbpf, &mb);
|
|
}
|
|
#endif
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
|
|
/*
|
|
* WEP is decrypted by hardware. Clear WEP bit
|
|
* header for ieee80211_input().
|
|
*/
|
|
wh->i_fc[1] &= ~IEEE80211_FC1_WEP;
|
|
}
|
|
|
|
/* synchronize driver's BSSID with firmware's BSSID */
|
|
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS && dir == IEEE80211_FC1_DIR_NODS)
|
|
wi_sync_bssid(sc, wh->i_addr3);
|
|
|
|
if (ic->ic_opmode != IEEE80211_M_STA) {
|
|
ni = ieee80211_find_node(ic, wh->i_addr2);
|
|
if (ni == NULL)
|
|
ni = ieee80211_ref_node(ic->ic_bss);
|
|
} else
|
|
ni = ieee80211_ref_node(ic->ic_bss);
|
|
|
|
ieee80211_input(ifp, m, ni, rssi, rstamp);
|
|
|
|
/*
|
|
* The frame may have caused the node to be marked for
|
|
* reclamation (e.g. in response to a DEAUTH message)
|
|
* so use free_node here instead of unref_node.
|
|
*/
|
|
if (ni == ic->ic_bss)
|
|
ieee80211_unref_node(&ni);
|
|
else
|
|
ieee80211_free_node(ic, ni);
|
|
}
|
|
|
|
static void
|
|
wi_tx_ex_intr(struct wi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
struct wi_frame frmhdr;
|
|
int fid;
|
|
|
|
fid = CSR_READ_2(sc, WI_TX_CMP_FID);
|
|
/* Read in the frame header */
|
|
if (wi_read_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr)) == 0) {
|
|
u_int16_t status = le16toh(frmhdr.wi_status);
|
|
|
|
/*
|
|
* Spontaneous station disconnects appear as xmit
|
|
* errors. Don't announce them and/or count them
|
|
* as an output error.
|
|
*/
|
|
if ((status & WI_TXSTAT_DISCONNECT) == 0) {
|
|
if (ppsratecheck(&lasttxerror, &curtxeps, wi_txerate)) {
|
|
curtxeps = 0;
|
|
printf("%s: tx failed", sc->sc_dev.dv_xname);
|
|
if (status & WI_TXSTAT_RET_ERR)
|
|
printf(", retry limit exceeded");
|
|
if (status & WI_TXSTAT_AGED_ERR)
|
|
printf(", max transmit lifetime exceeded");
|
|
if (status & WI_TXSTAT_DISCONNECT)
|
|
printf(", port disconnected");
|
|
if (status & WI_TXSTAT_FORM_ERR)
|
|
printf(", invalid format (data len %u src %s)",
|
|
le16toh(frmhdr.wi_dat_len),
|
|
ether_sprintf(frmhdr.wi_ehdr.ether_shost));
|
|
if (status & ~0xf)
|
|
printf(", status=0x%x", status);
|
|
printf("\n");
|
|
}
|
|
ifp->if_oerrors++;
|
|
} else {
|
|
DPRINTF(("port disconnected\n"));
|
|
ifp->if_collisions++; /* XXX */
|
|
}
|
|
} else
|
|
DPRINTF(("wi_tx_ex_intr: read fid %x failed\n", fid));
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_TX_EXC);
|
|
}
|
|
|
|
static void
|
|
wi_tx_intr(struct wi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
int fid, cur;
|
|
|
|
fid = CSR_READ_2(sc, WI_ALLOC_FID);
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC);
|
|
|
|
cur = sc->sc_txcur;
|
|
if (sc->sc_txd[cur].d_fid != fid) {
|
|
printf("%s: bad alloc %x != %x, cur %d nxt %d\n",
|
|
sc->sc_dev.dv_xname, fid, sc->sc_txd[cur].d_fid, cur,
|
|
sc->sc_txnext);
|
|
return;
|
|
}
|
|
sc->sc_tx_timer = 0;
|
|
sc->sc_txd[cur].d_len = 0;
|
|
sc->sc_txcur = cur = (cur + 1) % WI_NTXBUF;
|
|
if (sc->sc_txd[cur].d_len == 0)
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
else {
|
|
if (wi_cmd(sc, WI_CMD_TX | WI_RECLAIM, sc->sc_txd[cur].d_fid,
|
|
0, 0)) {
|
|
printf("%s: xmit failed\n", sc->sc_dev.dv_xname);
|
|
sc->sc_txd[cur].d_len = 0;
|
|
} else {
|
|
sc->sc_tx_timer = 5;
|
|
ifp->if_timer = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
wi_info_intr(struct wi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifnet *ifp = &ic->ic_if;
|
|
int i, fid, len, off;
|
|
u_int16_t ltbuf[2];
|
|
u_int16_t stat;
|
|
u_int32_t *ptr;
|
|
|
|
fid = CSR_READ_2(sc, WI_INFO_FID);
|
|
wi_read_bap(sc, fid, 0, ltbuf, sizeof(ltbuf));
|
|
|
|
switch (le16toh(ltbuf[1])) {
|
|
|
|
case WI_INFO_LINK_STAT:
|
|
wi_read_bap(sc, fid, sizeof(ltbuf), &stat, sizeof(stat));
|
|
DPRINTF(("wi_info_intr: LINK_STAT 0x%x\n", le16toh(stat)));
|
|
switch (le16toh(stat)) {
|
|
case CONNECTED:
|
|
sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
|
|
if (ic->ic_state == IEEE80211_S_RUN &&
|
|
ic->ic_opmode != IEEE80211_M_IBSS)
|
|
break;
|
|
/* FALLTHROUGH */
|
|
case AP_CHANGE:
|
|
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
|
|
break;
|
|
case AP_IN_RANGE:
|
|
sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
|
|
break;
|
|
case AP_OUT_OF_RANGE:
|
|
if (sc->sc_firmware_type == WI_SYMBOL &&
|
|
sc->sc_scan_timer > 0) {
|
|
if (wi_cmd(sc, WI_CMD_INQUIRE,
|
|
WI_INFO_HOST_SCAN_RESULTS, 0, 0) != 0)
|
|
sc->sc_scan_timer = 0;
|
|
break;
|
|
}
|
|
if (ic->ic_opmode == IEEE80211_M_STA)
|
|
sc->sc_flags |= WI_FLAGS_OUTRANGE;
|
|
break;
|
|
case DISCONNECTED:
|
|
case ASSOC_FAILED:
|
|
if (ic->ic_opmode == IEEE80211_M_STA)
|
|
ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WI_INFO_COUNTERS:
|
|
/* some card versions have a larger stats structure */
|
|
len = min(le16toh(ltbuf[0]) - 1, sizeof(sc->sc_stats) / 4);
|
|
ptr = (u_int32_t *)&sc->sc_stats;
|
|
off = sizeof(ltbuf);
|
|
for (i = 0; i < len; i++, off += 2, ptr++) {
|
|
wi_read_bap(sc, fid, off, &stat, sizeof(stat));
|
|
#ifdef WI_HERMES_STATS_WAR
|
|
if (stat & 0xf000)
|
|
stat = ~stat;
|
|
#endif
|
|
*ptr += stat;
|
|
}
|
|
ifp->if_collisions = sc->sc_stats.wi_tx_single_retries +
|
|
sc->sc_stats.wi_tx_multi_retries +
|
|
sc->sc_stats.wi_tx_retry_limit;
|
|
break;
|
|
|
|
case WI_INFO_SCAN_RESULTS:
|
|
case WI_INFO_HOST_SCAN_RESULTS:
|
|
wi_scan_result(sc, fid, le16toh(ltbuf[0]));
|
|
break;
|
|
|
|
default:
|
|
DPRINTF(("wi_info_intr: got fid %x type %x len %d\n", fid,
|
|
le16toh(ltbuf[1]), le16toh(ltbuf[0])));
|
|
break;
|
|
}
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_INFO);
|
|
}
|
|
|
|
static int
|
|
wi_write_multi(struct wi_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &sc->sc_ic.ic_if;
|
|
int n;
|
|
struct wi_mcast mlist;
|
|
struct ether_multi *enm;
|
|
struct ether_multistep estep;
|
|
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0) {
|
|
allmulti:
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
memset(&mlist, 0, sizeof(mlist));
|
|
return wi_write_rid(sc, WI_RID_MCAST_LIST, &mlist,
|
|
sizeof(mlist));
|
|
}
|
|
|
|
n = 0;
|
|
ETHER_FIRST_MULTI(estep, &sc->sc_ic.ic_ec, enm);
|
|
while (enm != NULL) {
|
|
/* Punt on ranges or too many multicast addresses. */
|
|
if (!IEEE80211_ADDR_EQ(enm->enm_addrlo, enm->enm_addrhi) ||
|
|
n >= sizeof(mlist) / sizeof(mlist.wi_mcast[0]))
|
|
goto allmulti;
|
|
|
|
IEEE80211_ADDR_COPY(&mlist.wi_mcast[n], enm->enm_addrlo);
|
|
n++;
|
|
ETHER_NEXT_MULTI(estep, enm);
|
|
}
|
|
ifp->if_flags &= ~IFF_ALLMULTI;
|
|
return wi_write_rid(sc, WI_RID_MCAST_LIST, &mlist,
|
|
IEEE80211_ADDR_LEN * n);
|
|
}
|
|
|
|
|
|
static void
|
|
wi_read_nicid(struct wi_softc *sc)
|
|
{
|
|
struct wi_card_ident *id;
|
|
char *p;
|
|
int len;
|
|
u_int16_t ver[4];
|
|
|
|
/* getting chip identity */
|
|
memset(ver, 0, sizeof(ver));
|
|
len = sizeof(ver);
|
|
wi_read_rid(sc, WI_RID_CARD_ID, ver, &len);
|
|
printf("%s: using ", sc->sc_dev.dv_xname);
|
|
DPRINTF2(("wi_read_nicid: CARD_ID: %x %x %x %x\n", le16toh(ver[0]), le16toh(ver[1]), le16toh(ver[2]), le16toh(ver[3])));
|
|
|
|
sc->sc_firmware_type = WI_NOTYPE;
|
|
for (id = wi_card_ident; id->card_name != NULL; id++) {
|
|
if (le16toh(ver[0]) == id->card_id) {
|
|
printf("%s", id->card_name);
|
|
sc->sc_firmware_type = id->firm_type;
|
|
break;
|
|
}
|
|
}
|
|
if (sc->sc_firmware_type == WI_NOTYPE) {
|
|
if (le16toh(ver[0]) & 0x8000) {
|
|
printf("Unknown PRISM2 chip");
|
|
sc->sc_firmware_type = WI_INTERSIL;
|
|
} else {
|
|
printf("Unknown Lucent chip");
|
|
sc->sc_firmware_type = WI_LUCENT;
|
|
}
|
|
}
|
|
|
|
/* get primary firmware version (Only Prism chips) */
|
|
if (sc->sc_firmware_type != WI_LUCENT) {
|
|
memset(ver, 0, sizeof(ver));
|
|
len = sizeof(ver);
|
|
wi_read_rid(sc, WI_RID_PRI_IDENTITY, ver, &len);
|
|
sc->sc_pri_firmware_ver = le16toh(ver[2]) * 10000 +
|
|
le16toh(ver[3]) * 100 + le16toh(ver[1]);
|
|
}
|
|
|
|
/* get station firmware version */
|
|
memset(ver, 0, sizeof(ver));
|
|
len = sizeof(ver);
|
|
wi_read_rid(sc, WI_RID_STA_IDENTITY, ver, &len);
|
|
sc->sc_sta_firmware_ver = le16toh(ver[2]) * 10000 +
|
|
le16toh(ver[3]) * 100 + le16toh(ver[1]);
|
|
if (sc->sc_firmware_type == WI_INTERSIL &&
|
|
(sc->sc_sta_firmware_ver == 10102 ||
|
|
sc->sc_sta_firmware_ver == 20102)) {
|
|
char ident[12];
|
|
memset(ident, 0, sizeof(ident));
|
|
len = sizeof(ident);
|
|
/* value should be the format like "V2.00-11" */
|
|
if (wi_read_rid(sc, WI_RID_SYMBOL_IDENTITY, ident, &len) == 0 &&
|
|
*(p = (char *)ident) >= 'A' &&
|
|
p[2] == '.' && p[5] == '-' && p[8] == '\0') {
|
|
sc->sc_firmware_type = WI_SYMBOL;
|
|
sc->sc_sta_firmware_ver = (p[1] - '0') * 10000 +
|
|
(p[3] - '0') * 1000 + (p[4] - '0') * 100 +
|
|
(p[6] - '0') * 10 + (p[7] - '0');
|
|
}
|
|
}
|
|
|
|
printf("\n%s: %s Firmware: ", sc->sc_dev.dv_xname,
|
|
sc->sc_firmware_type == WI_LUCENT ? "Lucent" :
|
|
(sc->sc_firmware_type == WI_SYMBOL ? "Symbol" : "Intersil"));
|
|
if (sc->sc_firmware_type != WI_LUCENT) /* XXX */
|
|
printf("Primary (%u.%u.%u), ",
|
|
sc->sc_pri_firmware_ver / 10000,
|
|
(sc->sc_pri_firmware_ver % 10000) / 100,
|
|
sc->sc_pri_firmware_ver % 100);
|
|
printf("Station (%u.%u.%u)\n",
|
|
sc->sc_sta_firmware_ver / 10000,
|
|
(sc->sc_sta_firmware_ver % 10000) / 100,
|
|
sc->sc_sta_firmware_ver % 100);
|
|
}
|
|
|
|
static int
|
|
wi_write_ssid(struct wi_softc *sc, int rid, u_int8_t *buf, int buflen)
|
|
{
|
|
struct wi_ssid ssid;
|
|
|
|
if (buflen > IEEE80211_NWID_LEN)
|
|
return ENOBUFS;
|
|
memset(&ssid, 0, sizeof(ssid));
|
|
ssid.wi_len = htole16(buflen);
|
|
memcpy(ssid.wi_ssid, buf, buflen);
|
|
return wi_write_rid(sc, rid, &ssid, sizeof(ssid));
|
|
}
|
|
|
|
static int
|
|
wi_get_cfg(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
struct wi_req wreq;
|
|
int len, n, error;
|
|
|
|
error = copyin(ifr->ifr_data, &wreq, sizeof(wreq));
|
|
if (error)
|
|
return error;
|
|
len = (wreq.wi_len - 1) * 2;
|
|
if (len < sizeof(u_int16_t))
|
|
return ENOSPC;
|
|
if (len > sizeof(wreq.wi_val))
|
|
len = sizeof(wreq.wi_val);
|
|
|
|
switch (wreq.wi_type) {
|
|
|
|
case WI_RID_IFACE_STATS:
|
|
memcpy(wreq.wi_val, &sc->sc_stats, sizeof(sc->sc_stats));
|
|
if (len < sizeof(sc->sc_stats))
|
|
error = ENOSPC;
|
|
else
|
|
len = sizeof(sc->sc_stats);
|
|
break;
|
|
|
|
case WI_RID_ENCRYPTION:
|
|
case WI_RID_TX_CRYPT_KEY:
|
|
case WI_RID_DEFLT_CRYPT_KEYS:
|
|
case WI_RID_TX_RATE:
|
|
return ieee80211_cfgget(ifp, cmd, data);
|
|
|
|
case WI_RID_MICROWAVE_OVEN:
|
|
if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_MOR)) {
|
|
error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
&len);
|
|
break;
|
|
}
|
|
wreq.wi_val[0] = htole16(sc->sc_microwave_oven);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
|
|
case WI_RID_DBM_ADJUST:
|
|
if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_DBMADJUST)) {
|
|
error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
&len);
|
|
break;
|
|
}
|
|
wreq.wi_val[0] = htole16(sc->sc_dbm_offset);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
|
|
case WI_RID_ROAMING_MODE:
|
|
if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_ROAMING)) {
|
|
error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
&len);
|
|
break;
|
|
}
|
|
wreq.wi_val[0] = htole16(sc->sc_roaming_mode);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
|
|
case WI_RID_SYSTEM_SCALE:
|
|
if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_SYSSCALE)) {
|
|
error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
&len);
|
|
break;
|
|
}
|
|
wreq.wi_val[0] = htole16(sc->sc_system_scale);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
|
|
case WI_RID_FRAG_THRESH:
|
|
if (sc->sc_enabled && (sc->sc_flags & WI_FLAGS_HAS_FRAGTHR)) {
|
|
error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
&len);
|
|
break;
|
|
}
|
|
wreq.wi_val[0] = htole16(sc->sc_frag_thresh);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
|
|
case WI_RID_READ_APS:
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP)
|
|
return ieee80211_cfgget(ifp, cmd, data);
|
|
if (sc->sc_scan_timer > 0) {
|
|
error = EINPROGRESS;
|
|
break;
|
|
}
|
|
n = sc->sc_naps;
|
|
if (len < sizeof(n)) {
|
|
error = ENOSPC;
|
|
break;
|
|
}
|
|
if (len < sizeof(n) + sizeof(struct wi_apinfo) * n)
|
|
n = (len - sizeof(n)) / sizeof(struct wi_apinfo);
|
|
len = sizeof(n) + sizeof(struct wi_apinfo) * n;
|
|
memcpy(wreq.wi_val, &n, sizeof(n));
|
|
memcpy((caddr_t)wreq.wi_val + sizeof(n), sc->sc_aps,
|
|
sizeof(struct wi_apinfo) * n);
|
|
break;
|
|
|
|
default:
|
|
if (sc->sc_enabled) {
|
|
error = wi_read_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
&len);
|
|
break;
|
|
}
|
|
switch (wreq.wi_type) {
|
|
case WI_RID_MAX_DATALEN:
|
|
wreq.wi_val[0] = htole16(sc->sc_max_datalen);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
case WI_RID_FRAG_THRESH:
|
|
wreq.wi_val[0] = htole16(sc->sc_frag_thresh);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
case WI_RID_RTS_THRESH:
|
|
wreq.wi_val[0] = htole16(sc->sc_rts_thresh);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
case WI_RID_CNFAUTHMODE:
|
|
wreq.wi_val[0] = htole16(sc->sc_cnfauthmode);
|
|
len = sizeof(u_int16_t);
|
|
break;
|
|
case WI_RID_NODENAME:
|
|
if (len < sc->sc_nodelen + sizeof(u_int16_t)) {
|
|
error = ENOSPC;
|
|
break;
|
|
}
|
|
len = sc->sc_nodelen + sizeof(u_int16_t);
|
|
wreq.wi_val[0] = htole16((sc->sc_nodelen + 1) / 2);
|
|
memcpy(&wreq.wi_val[1], sc->sc_nodename,
|
|
sc->sc_nodelen);
|
|
break;
|
|
default:
|
|
return ieee80211_cfgget(ifp, cmd, data);
|
|
}
|
|
break;
|
|
}
|
|
if (error)
|
|
return error;
|
|
wreq.wi_len = (len + 1) / 2 + 1;
|
|
return copyout(&wreq, ifr->ifr_data, (wreq.wi_len + 1) * 2);
|
|
}
|
|
|
|
static int
|
|
wi_set_cfg(struct ifnet *ifp, u_long cmd, caddr_t data)
|
|
{
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
struct ieee80211_rateset *rs = &ic->ic_sup_rates[IEEE80211_MODE_11B];
|
|
struct wi_req wreq;
|
|
struct mbuf *m;
|
|
int i, len, error;
|
|
|
|
error = copyin(ifr->ifr_data, &wreq, sizeof(wreq));
|
|
if (error)
|
|
return error;
|
|
len = (wreq.wi_len - 1) * 2;
|
|
switch (wreq.wi_type) {
|
|
case WI_RID_DBM_ADJUST:
|
|
return ENODEV;
|
|
|
|
case WI_RID_NODENAME:
|
|
if (le16toh(wreq.wi_val[0]) * 2 > len ||
|
|
le16toh(wreq.wi_val[0]) > sizeof(sc->sc_nodename)) {
|
|
error = ENOSPC;
|
|
break;
|
|
}
|
|
if (sc->sc_enabled) {
|
|
error = wi_write_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
len);
|
|
if (error)
|
|
break;
|
|
}
|
|
sc->sc_nodelen = le16toh(wreq.wi_val[0]) * 2;
|
|
memcpy(sc->sc_nodename, &wreq.wi_val[1], sc->sc_nodelen);
|
|
break;
|
|
|
|
case WI_RID_MICROWAVE_OVEN:
|
|
case WI_RID_ROAMING_MODE:
|
|
case WI_RID_SYSTEM_SCALE:
|
|
case WI_RID_FRAG_THRESH:
|
|
if (wreq.wi_type == WI_RID_MICROWAVE_OVEN &&
|
|
(sc->sc_flags & WI_FLAGS_HAS_MOR) == 0)
|
|
break;
|
|
if (wreq.wi_type == WI_RID_ROAMING_MODE &&
|
|
(sc->sc_flags & WI_FLAGS_HAS_ROAMING) == 0)
|
|
break;
|
|
if (wreq.wi_type == WI_RID_SYSTEM_SCALE &&
|
|
(sc->sc_flags & WI_FLAGS_HAS_SYSSCALE) == 0)
|
|
break;
|
|
if (wreq.wi_type == WI_RID_FRAG_THRESH &&
|
|
(sc->sc_flags & WI_FLAGS_HAS_FRAGTHR) == 0)
|
|
break;
|
|
/* FALLTHROUGH */
|
|
case WI_RID_RTS_THRESH:
|
|
case WI_RID_CNFAUTHMODE:
|
|
case WI_RID_MAX_DATALEN:
|
|
if (sc->sc_enabled) {
|
|
error = wi_write_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
sizeof(u_int16_t));
|
|
if (error)
|
|
break;
|
|
}
|
|
switch (wreq.wi_type) {
|
|
case WI_RID_FRAG_THRESH:
|
|
sc->sc_frag_thresh = le16toh(wreq.wi_val[0]);
|
|
break;
|
|
case WI_RID_RTS_THRESH:
|
|
sc->sc_rts_thresh = le16toh(wreq.wi_val[0]);
|
|
break;
|
|
case WI_RID_MICROWAVE_OVEN:
|
|
sc->sc_microwave_oven = le16toh(wreq.wi_val[0]);
|
|
break;
|
|
case WI_RID_ROAMING_MODE:
|
|
sc->sc_roaming_mode = le16toh(wreq.wi_val[0]);
|
|
break;
|
|
case WI_RID_SYSTEM_SCALE:
|
|
sc->sc_system_scale = le16toh(wreq.wi_val[0]);
|
|
break;
|
|
case WI_RID_CNFAUTHMODE:
|
|
sc->sc_cnfauthmode = le16toh(wreq.wi_val[0]);
|
|
break;
|
|
case WI_RID_MAX_DATALEN:
|
|
sc->sc_max_datalen = le16toh(wreq.wi_val[0]);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WI_RID_TX_RATE:
|
|
switch (le16toh(wreq.wi_val[0])) {
|
|
case 3:
|
|
ic->ic_fixed_rate = -1;
|
|
break;
|
|
default:
|
|
for (i = 0; i < IEEE80211_RATE_SIZE; i++) {
|
|
if ((rs->rs_rates[i] & IEEE80211_RATE_VAL)
|
|
/ 2 == le16toh(wreq.wi_val[0]))
|
|
break;
|
|
}
|
|
if (i == IEEE80211_RATE_SIZE)
|
|
return EINVAL;
|
|
ic->ic_fixed_rate = i;
|
|
}
|
|
if (sc->sc_enabled)
|
|
error = wi_cfg_txrate(sc);
|
|
break;
|
|
|
|
case WI_RID_SCAN_APS:
|
|
if (sc->sc_enabled && ic->ic_opmode != IEEE80211_M_HOSTAP)
|
|
error = wi_scan_ap(sc, 0x3fff, 0x000f);
|
|
break;
|
|
|
|
case WI_RID_MGMT_XMIT:
|
|
if (!sc->sc_enabled) {
|
|
error = ENETDOWN;
|
|
break;
|
|
}
|
|
if (ic->ic_mgtq.ifq_len > 5) {
|
|
error = EAGAIN;
|
|
break;
|
|
}
|
|
/* XXX wi_len looks in u_int8_t, not in u_int16_t */
|
|
m = m_devget((char *)&wreq.wi_val, wreq.wi_len, 0, ifp, NULL);
|
|
if (m == NULL) {
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
IF_ENQUEUE(&ic->ic_mgtq, m);
|
|
break;
|
|
|
|
default:
|
|
if (sc->sc_enabled) {
|
|
error = wi_write_rid(sc, wreq.wi_type, wreq.wi_val,
|
|
len);
|
|
if (error)
|
|
break;
|
|
}
|
|
error = ieee80211_cfgset(ifp, cmd, data);
|
|
break;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/* Rate is 0 for hardware auto-select, otherwise rate is
|
|
* 2, 4, 11, or 22 (units of 500Kbps).
|
|
*/
|
|
static int
|
|
wi_write_txrate(struct wi_softc *sc, int rate)
|
|
{
|
|
u_int16_t hwrate;
|
|
int i;
|
|
|
|
rate = (rate & IEEE80211_RATE_VAL) / 2;
|
|
|
|
/* rate: 0, 1, 2, 5, 11 */
|
|
switch (sc->sc_firmware_type) {
|
|
case WI_LUCENT:
|
|
switch (rate) {
|
|
case 0:
|
|
hwrate = 3; /* auto */
|
|
break;
|
|
case 5:
|
|
hwrate = 4;
|
|
break;
|
|
case 11:
|
|
hwrate = 5;
|
|
break;
|
|
default:
|
|
hwrate = rate;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
/* Choose a bit according to this table.
|
|
*
|
|
* bit | data rate
|
|
* ----+-------------------
|
|
* 0 | 1Mbps
|
|
* 1 | 2Mbps
|
|
* 2 | 5.5Mbps
|
|
* 3 | 11Mbps
|
|
*/
|
|
for (i = 8; i > 0; i >>= 1) {
|
|
if (rate >= i)
|
|
break;
|
|
}
|
|
if (i == 0)
|
|
hwrate = 0xf; /* auto */
|
|
else
|
|
hwrate = i;
|
|
break;
|
|
}
|
|
|
|
if (sc->sc_tx_rate == hwrate)
|
|
return 0;
|
|
|
|
sc->sc_tx_rate = hwrate;
|
|
|
|
return wi_write_val(sc, WI_RID_TX_RATE, sc->sc_tx_rate);
|
|
}
|
|
|
|
static int
|
|
wi_cfg_txrate(struct wi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211_rateset *rs;
|
|
int rate;
|
|
|
|
rs = &ic->ic_sup_rates[IEEE80211_MODE_11B];
|
|
|
|
sc->sc_tx_rate = 0; /* force write to RID */
|
|
|
|
if (ic->ic_fixed_rate < 0)
|
|
rate = 0; /* auto */
|
|
else
|
|
rate = (rs->rs_rates[ic->ic_fixed_rate] &
|
|
IEEE80211_RATE_VAL) / 2;
|
|
|
|
return wi_write_txrate(sc, rate);
|
|
}
|
|
|
|
static int
|
|
wi_write_wep(struct wi_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
int error = 0;
|
|
int i, keylen;
|
|
u_int16_t val;
|
|
struct wi_key wkey[IEEE80211_WEP_NKID];
|
|
|
|
switch (sc->sc_firmware_type) {
|
|
case WI_LUCENT:
|
|
val = (ic->ic_flags & IEEE80211_F_WEPON) ? 1 : 0;
|
|
error = wi_write_val(sc, WI_RID_ENCRYPTION, val);
|
|
if (error)
|
|
break;
|
|
error = wi_write_val(sc, WI_RID_TX_CRYPT_KEY, ic->ic_wep_txkey);
|
|
if (error)
|
|
break;
|
|
memset(wkey, 0, sizeof(wkey));
|
|
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
|
|
keylen = ic->ic_nw_keys[i].wk_len;
|
|
wkey[i].wi_keylen = htole16(keylen);
|
|
memcpy(wkey[i].wi_keydat, ic->ic_nw_keys[i].wk_key,
|
|
keylen);
|
|
}
|
|
error = wi_write_rid(sc, WI_RID_DEFLT_CRYPT_KEYS,
|
|
wkey, sizeof(wkey));
|
|
break;
|
|
|
|
case WI_INTERSIL:
|
|
case WI_SYMBOL:
|
|
if (ic->ic_flags & IEEE80211_F_WEPON) {
|
|
/*
|
|
* ONLY HWB3163 EVAL-CARD Firmware version
|
|
* less than 0.8 variant2
|
|
*
|
|
* If promiscuous mode disable, Prism2 chip
|
|
* does not work with WEP .
|
|
* It is under investigation for details.
|
|
* (ichiro@netbsd.org)
|
|
*/
|
|
if (sc->sc_firmware_type == WI_INTERSIL &&
|
|
sc->sc_sta_firmware_ver < 802 ) {
|
|
/* firm ver < 0.8 variant 2 */
|
|
wi_write_val(sc, WI_RID_PROMISC, 1);
|
|
}
|
|
wi_write_val(sc, WI_RID_CNFAUTHMODE,
|
|
sc->sc_cnfauthmode);
|
|
val = PRIVACY_INVOKED | EXCLUDE_UNENCRYPTED;
|
|
/*
|
|
* Encryption firmware has a bug for HostAP mode.
|
|
*/
|
|
if (sc->sc_firmware_type == WI_INTERSIL &&
|
|
ic->ic_opmode == IEEE80211_M_HOSTAP)
|
|
val |= HOST_ENCRYPT;
|
|
} else {
|
|
wi_write_val(sc, WI_RID_CNFAUTHMODE,
|
|
IEEE80211_AUTH_OPEN);
|
|
val = HOST_ENCRYPT | HOST_DECRYPT;
|
|
}
|
|
error = wi_write_val(sc, WI_RID_P2_ENCRYPTION, val);
|
|
if (error)
|
|
break;
|
|
error = wi_write_val(sc, WI_RID_P2_TX_CRYPT_KEY,
|
|
ic->ic_wep_txkey);
|
|
if (error)
|
|
break;
|
|
/*
|
|
* It seems that the firmware accept 104bit key only if
|
|
* all the keys have 104bit length. We get the length of
|
|
* the transmit key and use it for all other keys.
|
|
* Perhaps we should use software WEP for such situation.
|
|
*/
|
|
keylen = ic->ic_nw_keys[ic->ic_wep_txkey].wk_len;
|
|
if (keylen > IEEE80211_WEP_KEYLEN)
|
|
keylen = 13; /* 104bit keys */
|
|
else
|
|
keylen = IEEE80211_WEP_KEYLEN;
|
|
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
|
|
error = wi_write_rid(sc, WI_RID_P2_CRYPT_KEY0 + i,
|
|
ic->ic_nw_keys[i].wk_key, keylen);
|
|
if (error)
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/* Must be called at proper protection level! */
|
|
static int
|
|
wi_cmd(struct wi_softc *sc, int cmd, int val0, int val1, int val2)
|
|
{
|
|
int i, status;
|
|
|
|
/* wait for the busy bit to clear */
|
|
for (i = 500; i > 0; i--) { /* 5s */
|
|
if ((CSR_READ_2(sc, WI_COMMAND) & WI_CMD_BUSY) == 0)
|
|
break;
|
|
DELAY(10*1000); /* 10 m sec */
|
|
}
|
|
if (i == 0) {
|
|
printf("%s: wi_cmd: busy bit won't clear.\n",
|
|
sc->sc_dev.dv_xname);
|
|
return(ETIMEDOUT);
|
|
}
|
|
CSR_WRITE_2(sc, WI_PARAM0, val0);
|
|
CSR_WRITE_2(sc, WI_PARAM1, val1);
|
|
CSR_WRITE_2(sc, WI_PARAM2, val2);
|
|
CSR_WRITE_2(sc, WI_COMMAND, cmd);
|
|
|
|
if (cmd == WI_CMD_INI) {
|
|
/* XXX: should sleep here. */
|
|
DELAY(100*1000);
|
|
}
|
|
/* wait for the cmd completed bit */
|
|
for (i = 0; i < WI_TIMEOUT; i++) {
|
|
if (CSR_READ_2(sc, WI_EVENT_STAT) & WI_EV_CMD)
|
|
break;
|
|
DELAY(WI_DELAY);
|
|
}
|
|
|
|
status = CSR_READ_2(sc, WI_STATUS);
|
|
|
|
/* Ack the command */
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_CMD);
|
|
|
|
if (i == WI_TIMEOUT) {
|
|
printf("%s: command timed out, cmd=0x%x, arg=0x%x\n",
|
|
sc->sc_dev.dv_xname, cmd, val0);
|
|
return ETIMEDOUT;
|
|
}
|
|
|
|
if (status & WI_STAT_CMD_RESULT) {
|
|
printf("%s: command failed, cmd=0x%x, arg=0x%x\n",
|
|
sc->sc_dev.dv_xname, cmd, val0);
|
|
return EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
wi_seek_bap(struct wi_softc *sc, int id, int off)
|
|
{
|
|
int i, status;
|
|
|
|
CSR_WRITE_2(sc, WI_SEL0, id);
|
|
CSR_WRITE_2(sc, WI_OFF0, off);
|
|
|
|
for (i = 0; ; i++) {
|
|
status = CSR_READ_2(sc, WI_OFF0);
|
|
if ((status & WI_OFF_BUSY) == 0)
|
|
break;
|
|
if (i == WI_TIMEOUT) {
|
|
printf("%s: timeout in wi_seek to %x/%x\n",
|
|
sc->sc_dev.dv_xname, id, off);
|
|
sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
|
|
return ETIMEDOUT;
|
|
}
|
|
DELAY(1);
|
|
}
|
|
if (status & WI_OFF_ERR) {
|
|
printf("%s: failed in wi_seek to %x/%x\n",
|
|
sc->sc_dev.dv_xname, id, off);
|
|
sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
|
|
return EIO;
|
|
}
|
|
sc->sc_bap_id = id;
|
|
sc->sc_bap_off = off;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
wi_read_bap(struct wi_softc *sc, int id, int off, void *buf, int buflen)
|
|
{
|
|
int error, cnt;
|
|
|
|
if (buflen == 0)
|
|
return 0;
|
|
if (id != sc->sc_bap_id || off != sc->sc_bap_off) {
|
|
if ((error = wi_seek_bap(sc, id, off)) != 0)
|
|
return error;
|
|
}
|
|
cnt = (buflen + 1) / 2;
|
|
CSR_READ_MULTI_STREAM_2(sc, WI_DATA0, (u_int16_t *)buf, cnt);
|
|
sc->sc_bap_off += cnt * 2;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
wi_write_bap(struct wi_softc *sc, int id, int off, void *buf, int buflen)
|
|
{
|
|
int error, cnt;
|
|
|
|
if (buflen == 0)
|
|
return 0;
|
|
|
|
#ifdef WI_HERMES_AUTOINC_WAR
|
|
again:
|
|
#endif
|
|
if (id != sc->sc_bap_id || off != sc->sc_bap_off) {
|
|
if ((error = wi_seek_bap(sc, id, off)) != 0)
|
|
return error;
|
|
}
|
|
cnt = (buflen + 1) / 2;
|
|
CSR_WRITE_MULTI_STREAM_2(sc, WI_DATA0, (u_int16_t *)buf, cnt);
|
|
sc->sc_bap_off += cnt * 2;
|
|
|
|
#ifdef WI_HERMES_AUTOINC_WAR
|
|
/*
|
|
* According to the comments in the HCF Light code, there is a bug
|
|
* in the Hermes (or possibly in certain Hermes firmware revisions)
|
|
* where the chip's internal autoincrement counter gets thrown off
|
|
* during data writes: the autoincrement is missed, causing one
|
|
* data word to be overwritten and subsequent words to be written to
|
|
* the wrong memory locations. The end result is that we could end
|
|
* up transmitting bogus frames without realizing it. The workaround
|
|
* for this is to write a couple of extra guard words after the end
|
|
* of the transfer, then attempt to read then back. If we fail to
|
|
* locate the guard words where we expect them, we preform the
|
|
* transfer over again.
|
|
*/
|
|
if ((sc->sc_flags & WI_FLAGS_BUG_AUTOINC) && (id & 0xf000) == 0) {
|
|
CSR_WRITE_2(sc, WI_DATA0, 0x1234);
|
|
CSR_WRITE_2(sc, WI_DATA0, 0x5678);
|
|
wi_seek_bap(sc, id, sc->sc_bap_off);
|
|
sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
|
|
if (CSR_READ_2(sc, WI_DATA0) != 0x1234 ||
|
|
CSR_READ_2(sc, WI_DATA0) != 0x5678) {
|
|
printf("%s: detect auto increment bug, try again\n",
|
|
sc->sc_dev.dv_xname);
|
|
goto again;
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
wi_mwrite_bap(struct wi_softc *sc, int id, int off, struct mbuf *m0, int totlen)
|
|
{
|
|
int error, len;
|
|
struct mbuf *m;
|
|
|
|
for (m = m0; m != NULL && totlen > 0; m = m->m_next) {
|
|
if (m->m_len == 0)
|
|
continue;
|
|
|
|
len = min(m->m_len, totlen);
|
|
|
|
if (((u_long)m->m_data) % 2 != 0 || len % 2 != 0) {
|
|
m_copydata(m, 0, totlen, (caddr_t)&sc->sc_txbuf);
|
|
return wi_write_bap(sc, id, off, (caddr_t)&sc->sc_txbuf,
|
|
totlen);
|
|
}
|
|
|
|
if ((error = wi_write_bap(sc, id, off, m->m_data, len)) != 0)
|
|
return error;
|
|
|
|
off += m->m_len;
|
|
totlen -= len;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
wi_alloc_fid(struct wi_softc *sc, int len, int *idp)
|
|
{
|
|
int i;
|
|
|
|
if (wi_cmd(sc, WI_CMD_ALLOC_MEM, len, 0, 0)) {
|
|
printf("%s: failed to allocate %d bytes on NIC\n",
|
|
sc->sc_dev.dv_xname, len);
|
|
return ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < WI_TIMEOUT; i++) {
|
|
if (CSR_READ_2(sc, WI_EVENT_STAT) & WI_EV_ALLOC)
|
|
break;
|
|
if (i == WI_TIMEOUT) {
|
|
printf("%s: timeout in alloc\n", sc->sc_dev.dv_xname);
|
|
return ETIMEDOUT;
|
|
}
|
|
DELAY(1);
|
|
}
|
|
*idp = CSR_READ_2(sc, WI_ALLOC_FID);
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
wi_read_rid(struct wi_softc *sc, int rid, void *buf, int *buflenp)
|
|
{
|
|
int error, len;
|
|
u_int16_t ltbuf[2];
|
|
|
|
/* Tell the NIC to enter record read mode. */
|
|
error = wi_cmd(sc, WI_CMD_ACCESS | WI_ACCESS_READ, rid, 0, 0);
|
|
if (error)
|
|
return error;
|
|
|
|
error = wi_read_bap(sc, rid, 0, ltbuf, sizeof(ltbuf));
|
|
if (error)
|
|
return error;
|
|
|
|
if (le16toh(ltbuf[1]) != rid) {
|
|
printf("%s: record read mismatch, rid=%x, got=%x\n",
|
|
sc->sc_dev.dv_xname, rid, le16toh(ltbuf[1]));
|
|
return EIO;
|
|
}
|
|
len = (le16toh(ltbuf[0]) - 1) * 2; /* already got rid */
|
|
if (*buflenp < len) {
|
|
printf("%s: record buffer is too small, "
|
|
"rid=%x, size=%d, len=%d\n",
|
|
sc->sc_dev.dv_xname, rid, *buflenp, len);
|
|
return ENOSPC;
|
|
}
|
|
*buflenp = len;
|
|
return wi_read_bap(sc, rid, sizeof(ltbuf), buf, len);
|
|
}
|
|
|
|
static int
|
|
wi_write_rid(struct wi_softc *sc, int rid, void *buf, int buflen)
|
|
{
|
|
int error;
|
|
u_int16_t ltbuf[2];
|
|
|
|
ltbuf[0] = htole16((buflen + 1) / 2 + 1); /* includes rid */
|
|
ltbuf[1] = htole16(rid);
|
|
|
|
error = wi_write_bap(sc, rid, 0, ltbuf, sizeof(ltbuf));
|
|
if (error)
|
|
return error;
|
|
error = wi_write_bap(sc, rid, sizeof(ltbuf), buf, buflen);
|
|
if (error)
|
|
return error;
|
|
|
|
return wi_cmd(sc, WI_CMD_ACCESS | WI_ACCESS_WRITE, rid, 0, 0);
|
|
}
|
|
|
|
static int
|
|
wi_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
|
|
{
|
|
struct wi_softc *sc = ic->ic_softc;
|
|
struct ieee80211_node *ni = ic->ic_bss;
|
|
int buflen;
|
|
u_int16_t val;
|
|
struct wi_ssid ssid;
|
|
struct wi_macaddr bssid, old_bssid;
|
|
enum ieee80211_state ostate;
|
|
#ifdef WI_DEBUG
|
|
static const char *stname[] =
|
|
{ "INIT", "SCAN", "AUTH", "ASSOC", "RUN" };
|
|
#endif /* WI_DEBUG */
|
|
|
|
ostate = ic->ic_state;
|
|
DPRINTF(("wi_newstate: %s -> %s\n", stname[ostate], stname[nstate]));
|
|
|
|
switch (nstate) {
|
|
case IEEE80211_S_INIT:
|
|
ic->ic_flags &= ~IEEE80211_F_SIBSS;
|
|
sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
|
|
return (*sc->sc_newstate)(ic, nstate, arg);
|
|
|
|
case IEEE80211_S_RUN:
|
|
sc->sc_flags &= ~WI_FLAGS_OUTRANGE;
|
|
buflen = IEEE80211_ADDR_LEN;
|
|
IEEE80211_ADDR_COPY(old_bssid.wi_mac_addr, ni->ni_bssid);
|
|
wi_read_rid(sc, WI_RID_CURRENT_BSSID, &bssid, &buflen);
|
|
IEEE80211_ADDR_COPY(ni->ni_bssid, &bssid);
|
|
IEEE80211_ADDR_COPY(ni->ni_macaddr, &bssid);
|
|
buflen = sizeof(val);
|
|
wi_read_rid(sc, WI_RID_CURRENT_CHAN, &val, &buflen);
|
|
if (!isset(ic->ic_chan_avail, le16toh(val)))
|
|
panic("%s: invalid channel %d\n", sc->sc_dev.dv_xname,
|
|
le16toh(val));
|
|
ni->ni_chan = &ic->ic_channels[le16toh(val)];
|
|
|
|
if (IEEE80211_ADDR_EQ(old_bssid.wi_mac_addr, ni->ni_bssid))
|
|
sc->sc_false_syns++;
|
|
else
|
|
sc->sc_false_syns = 0;
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
|
|
ni->ni_esslen = ic->ic_des_esslen;
|
|
memcpy(ni->ni_essid, ic->ic_des_essid, ni->ni_esslen);
|
|
ni->ni_rates = ic->ic_sup_rates[
|
|
ieee80211_chan2mode(ic, ni->ni_chan)];
|
|
ni->ni_intval = ic->ic_lintval;
|
|
ni->ni_capinfo = IEEE80211_CAPINFO_ESS;
|
|
if (ic->ic_flags & IEEE80211_F_WEPON)
|
|
ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
|
|
} else {
|
|
buflen = sizeof(ssid);
|
|
wi_read_rid(sc, WI_RID_CURRENT_SSID, &ssid, &buflen);
|
|
ni->ni_esslen = le16toh(ssid.wi_len);
|
|
if (ni->ni_esslen > IEEE80211_NWID_LEN)
|
|
ni->ni_esslen = IEEE80211_NWID_LEN; /*XXX*/
|
|
memcpy(ni->ni_essid, ssid.wi_ssid, ni->ni_esslen);
|
|
}
|
|
break;
|
|
|
|
case IEEE80211_S_SCAN:
|
|
case IEEE80211_S_AUTH:
|
|
case IEEE80211_S_ASSOC:
|
|
break;
|
|
}
|
|
|
|
ic->ic_state = nstate;
|
|
/* skip standard ieee80211 handling */
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
wi_set_tim(struct ieee80211com *ic, int aid, int which)
|
|
{
|
|
struct wi_softc *sc = ic->ic_softc;
|
|
|
|
aid &= ~0xc000;
|
|
if (which)
|
|
aid |= 0x8000;
|
|
|
|
return wi_write_val(sc, WI_RID_SET_TIM, aid);
|
|
}
|
|
|
|
static int
|
|
wi_scan_ap(struct wi_softc *sc, u_int16_t chanmask, u_int16_t txrate)
|
|
{
|
|
int error = 0;
|
|
u_int16_t val[2];
|
|
|
|
if (!sc->sc_enabled)
|
|
return ENXIO;
|
|
switch (sc->sc_firmware_type) {
|
|
case WI_LUCENT:
|
|
(void)wi_cmd(sc, WI_CMD_INQUIRE, WI_INFO_SCAN_RESULTS, 0, 0);
|
|
break;
|
|
case WI_INTERSIL:
|
|
val[0] = chanmask; /* channel */
|
|
val[1] = txrate; /* tx rate */
|
|
error = wi_write_rid(sc, WI_RID_SCAN_REQ, val, sizeof(val));
|
|
break;
|
|
case WI_SYMBOL:
|
|
/*
|
|
* XXX only supported on 3.x ?
|
|
*/
|
|
val[0] = BSCAN_BCAST | BSCAN_ONETIME;
|
|
error = wi_write_rid(sc, WI_RID_BCAST_SCAN_REQ,
|
|
val, sizeof(val[0]));
|
|
break;
|
|
}
|
|
if (error == 0) {
|
|
sc->sc_scan_timer = WI_SCAN_WAIT;
|
|
sc->sc_ic.ic_if.if_timer = 1;
|
|
DPRINTF(("wi_scan_ap: start scanning, "
|
|
"chanmask 0x%x txrate 0x%x\n", chanmask, txrate));
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
wi_scan_result(struct wi_softc *sc, int fid, int cnt)
|
|
{
|
|
#define N(a) (sizeof (a) / sizeof (a[0]))
|
|
int i, naps, off, szbuf;
|
|
struct wi_scan_header ws_hdr; /* Prism2 header */
|
|
struct wi_scan_data_p2 ws_dat; /* Prism2 scantable*/
|
|
struct wi_apinfo *ap;
|
|
|
|
off = sizeof(u_int16_t) * 2;
|
|
memset(&ws_hdr, 0, sizeof(ws_hdr));
|
|
switch (sc->sc_firmware_type) {
|
|
case WI_INTERSIL:
|
|
wi_read_bap(sc, fid, off, &ws_hdr, sizeof(ws_hdr));
|
|
off += sizeof(ws_hdr);
|
|
szbuf = sizeof(struct wi_scan_data_p2);
|
|
break;
|
|
case WI_SYMBOL:
|
|
szbuf = sizeof(struct wi_scan_data_p2) + 6;
|
|
break;
|
|
case WI_LUCENT:
|
|
szbuf = sizeof(struct wi_scan_data);
|
|
break;
|
|
default:
|
|
printf("%s: wi_scan_result: unknown firmware type %u\n",
|
|
sc->sc_dev.dv_xname, sc->sc_firmware_type);
|
|
naps = 0;
|
|
goto done;
|
|
}
|
|
naps = (cnt * 2 + 2 - off) / szbuf;
|
|
if (naps > N(sc->sc_aps))
|
|
naps = N(sc->sc_aps);
|
|
sc->sc_naps = naps;
|
|
/* Read Data */
|
|
ap = sc->sc_aps;
|
|
memset(&ws_dat, 0, sizeof(ws_dat));
|
|
for (i = 0; i < naps; i++, ap++) {
|
|
wi_read_bap(sc, fid, off, &ws_dat,
|
|
(sizeof(ws_dat) < szbuf ? sizeof(ws_dat) : szbuf));
|
|
DPRINTF2(("wi_scan_result: #%d: off %d bssid %s\n", i, off,
|
|
ether_sprintf(ws_dat.wi_bssid)));
|
|
off += szbuf;
|
|
ap->scanreason = le16toh(ws_hdr.wi_reason);
|
|
memcpy(ap->bssid, ws_dat.wi_bssid, sizeof(ap->bssid));
|
|
ap->channel = le16toh(ws_dat.wi_chid);
|
|
ap->signal = le16toh(ws_dat.wi_signal);
|
|
ap->noise = le16toh(ws_dat.wi_noise);
|
|
ap->quality = ap->signal - ap->noise;
|
|
ap->capinfo = le16toh(ws_dat.wi_capinfo);
|
|
ap->interval = le16toh(ws_dat.wi_interval);
|
|
ap->rate = le16toh(ws_dat.wi_rate);
|
|
ap->namelen = le16toh(ws_dat.wi_namelen);
|
|
if (ap->namelen > sizeof(ap->name))
|
|
ap->namelen = sizeof(ap->name);
|
|
memcpy(ap->name, ws_dat.wi_name, ap->namelen);
|
|
}
|
|
done:
|
|
/* Done scanning */
|
|
sc->sc_scan_timer = 0;
|
|
DPRINTF(("wi_scan_result: scan complete: ap %d\n", naps));
|
|
#undef N
|
|
}
|
|
|
|
static void
|
|
wi_dump_pkt(struct wi_frame *wh, struct ieee80211_node *ni, int rssi)
|
|
{
|
|
ieee80211_dump_pkt((u_int8_t *) &wh->wi_whdr, sizeof(wh->wi_whdr),
|
|
ni ? ni->ni_rates.rs_rates[ni->ni_txrate] & IEEE80211_RATE_VAL
|
|
: -1,
|
|
rssi);
|
|
printf(" status 0x%x rx_tstamp1 %u rx_tstamp0 0x%u rx_silence %u\n",
|
|
le16toh(wh->wi_status), le16toh(wh->wi_rx_tstamp1),
|
|
le16toh(wh->wi_rx_tstamp0), wh->wi_rx_silence);
|
|
printf(" rx_signal %u rx_rate %u rx_flow %u\n",
|
|
wh->wi_rx_signal, wh->wi_rx_rate, wh->wi_rx_flow);
|
|
printf(" tx_rtry %u tx_rate %u tx_ctl 0x%x dat_len %u\n",
|
|
wh->wi_tx_rtry, wh->wi_tx_rate,
|
|
le16toh(wh->wi_tx_ctl), le16toh(wh->wi_dat_len));
|
|
printf(" ehdr dst %s src %s type 0x%x\n",
|
|
ether_sprintf(wh->wi_ehdr.ether_dhost),
|
|
ether_sprintf(wh->wi_ehdr.ether_shost),
|
|
wh->wi_ehdr.ether_type);
|
|
}
|