NetBSD/sys/dev/ata/atareg.h

159 lines
6.2 KiB
C

/* $NetBSD: atareg.h,v 1.8 2002/01/13 17:24:30 christos Exp $ */
/*
* Drive parameter structure for ATA/ATAPI.
* Bit fields: WDC_* : common to ATA/ATAPI
* ATA_* : ATA only
* ATAPI_* : ATAPI only.
*/
struct ataparams {
/* drive info */
u_int16_t atap_config; /* 0: general configuration */
#define WDC_CFG_ATAPI_MASK 0xc000
#define WDC_CFG_ATAPI 0x8000
#define ATA_CFG_REMOVABLE 0x0080
#define ATA_CFG_FIXED 0x0040
#define ATAPI_CFG_TYPE_MASK 0x1f00
#define ATAPI_CFG_TYPE(x) (((x) & ATAPI_CFG_TYPE_MASK) >> 8)
#define ATAPI_CFG_REMOV 0x0080
#define ATAPI_CFG_DRQ_MASK 0x0060
#define ATAPI_CFG_STD_DRQ 0x0000
#define ATAPI_CFG_IRQ_DRQ 0x0020
#define ATAPI_CFG_ACCEL_DRQ 0x0040
#define ATAPI_CFG_CMD_MASK 0x0003
#define ATAPI_CFG_CMD_12 0x0000
#define ATAPI_CFG_CMD_16 0x0001
/* words 1-9 are ATA only */
u_int16_t atap_cylinders; /* 1: # of non-removable cylinders */
u_int16_t __reserved1;
u_int16_t atap_heads; /* 3: # of heads */
u_int16_t __retired1[2]; /* 4-5: # of unform. bytes/track */
u_int16_t atap_sectors; /* 6: # of sectors */
u_int16_t __retired2[3];
u_int8_t atap_serial[20]; /* 10-19: serial number */
u_int16_t __retired3[2];
u_int16_t __obsolete1;
u_int8_t atap_revision[8]; /* 23-26: firmware revision */
u_int8_t atap_model[40]; /* 27-46: model number */
u_int16_t atap_multi; /* 47: maximum sectors per irq (ATA) */
u_int16_t __reserved2;
u_int16_t atap_capabilities1; /* 49: capability flags */
#define WDC_CAP_IORDY 0x0800
#define WDC_CAP_IORDY_DSBL 0x0400
#define WDC_CAP_LBA 0x0200
#define WDC_CAP_DMA 0x0100
#define ATA_CAP_STBY 0x2000
#define ATAPI_CAP_INTERL_DMA 0x8000
#define ATAPI_CAP_CMD_QUEUE 0x4000
#define ATAPI_CAP_OVERLP 0X2000
#define ATAPI_CAP_ATA_RST 0x1000
u_int16_t atap_capabilities2; /* 50: capability flags (ATA) */
#if BYTE_ORDER == LITTLE_ENDIAN
u_int8_t __junk2;
u_int8_t atap_oldpiotiming; /* 51: old PIO timing mode */
u_int8_t __junk3;
u_int8_t atap_olddmatiming; /* 52: old DMA timing mode (ATA) */
#else
u_int8_t atap_oldpiotiming; /* 51: old PIO timing mode */
u_int8_t __junk2;
u_int8_t atap_olddmatiming; /* 52: old DMA timing mode (ATA) */
u_int8_t __junk3;
#endif
u_int16_t atap_extensions; /* 53: extensions supported */
#define WDC_EXT_UDMA_MODES 0x0004
#define WDC_EXT_MODES 0x0002
#define WDC_EXT_GEOM 0x0001
/* words 54-62 are ATA only */
u_int16_t atap_curcylinders; /* 54: current logical cyliners */
u_int16_t atap_curheads; /* 55: current logical heads */
u_int16_t atap_cursectors; /* 56: current logical sectors/tracks */
u_int16_t atap_curcapacity[2]; /* 57-58: current capacity */
u_int16_t atap_curmulti; /* 59: current multi-sector setting */
#define WDC_MULTI_VALID 0x0100
#define WDC_MULTI_MASK 0x00ff
u_int16_t atap_capacity[2]; /* 60-61: total capacity (LBA only) */
u_int16_t __retired4;
#if BYTE_ORDER == LITTLE_ENDIAN
u_int8_t atap_dmamode_supp; /* 63: multiword DMA mode supported */
u_int8_t atap_dmamode_act; /* multiword DMA mode active */
u_int8_t atap_piomode_supp; /* 64: PIO mode supported */
u_int8_t __junk4;
#else
u_int8_t atap_dmamode_act; /* multiword DMA mode active */
u_int8_t atap_dmamode_supp; /* 63: multiword DMA mode supported */
u_int8_t __junk4;
u_int8_t atap_piomode_supp; /* 64: PIO mode supported */
#endif
u_int16_t atap_dmatiming_mimi; /* 65: minimum DMA cycle time */
u_int16_t atap_dmatiming_recom; /* 66: recomended DMA cycle time */
u_int16_t atap_piotiming; /* 67: mini PIO cycle time without FC */
u_int16_t atap_piotiming_iordy; /* 68: mini PIO cycle time with IORDY FC */
u_int16_t __reserved3[2];
/* words 71-72 are ATAPI only */
u_int16_t atap_pkt_br; /* 71: time (ns) to bus release */
u_int16_t atap_pkt_bsyclr; /* 72: tme to clear BSY after service */
u_int16_t __reserved4[2];
u_int16_t atap_queuedepth; /* 75: */
#define WDC_QUEUE_DEPTH_MASK 0x0F
u_int16_t __reserved5[4];
u_int16_t atap_ata_major; /* 80: Major version number */
#define WDC_VER_ATA1 0x0002
#define WDC_VER_ATA2 0x0004
#define WDC_VER_ATA3 0x0008
#define WDC_VER_ATA4 0x0010
#define WDC_VER_ATA5 0x0020
u_int16_t atap_ata_minor; /* 81: Minor version number */
u_int16_t atap_cmd_set1; /* 82: command set supported */
#define WDC_CMD1_NOP 0x4000
#define WDC_CMD1_RB 0x2000
#define WDC_CMD1_WB 0x1000
#define WDC_CMD1_HPA 0x0400
#define WDC_CMD1_DVRST 0x0200
#define WDC_CMD1_SRV 0x0100
#define WDC_CMD1_RLSE 0x0080
#define WDC_CMD1_AHEAD 0x0040
#define WDC_CMD1_CACHE 0x0020
#define WDC_CMD1_PKT 0x0010
#define WDC_CMD1_PM 0x0008
#define WDC_CMD1_REMOV 0x0004
#define WDC_CMD1_SEC 0x0002
#define WDC_CMD1_SMART 0x0001
u_int16_t atap_cmd_set2; /* 83: command set supported */
#define WDC_CMD2_RMSN 0x0010
#define WDC_CMD2_DM 0x0001
#define ATA_CMD2_APM 0x0008
#define ATA_CMD2_CFA 0x0004
#define ATA_CMD2_RWQ 0x0002
u_int16_t atap_cmd_ext; /* 84: command/features supp. ext. */
u_int16_t atap_cmd1_en; /* 85: cmd/features enabled */
/* bits are the same as atap_cmd_set1 */
u_int16_t atap_cmd2_en; /* 86: cmd/features enabled */
#define WDC_CAP_LBA48 (1L << 10)
/* bits are the same as atap_cmd_set2 */
u_int16_t atap_cmd_def; /* 87: cmd/features default */
#if BYTE_ORDER == LITTLE_ENDIAN
u_int8_t atap_udmamode_supp; /* 88: Ultra-DMA mode supported */
u_int8_t atap_udmamode_act; /* Ultra-DMA mode active */
#else
u_int8_t atap_udmamode_act; /* Ultra-DMA mode active */
u_int8_t atap_udmamode_supp; /* 88: Ultra-DMA mode supported */
#endif
/* 89-92 are ATA-only */
u_int16_t atap_seu_time; /* 89: Sec. Erase Unit compl. time */
u_int16_t atap_eseu_time; /* 90: Enhanced SEU compl. time */
u_int16_t atap_apm_val; /* 91: current APM value */
u_int16_t __reserved6[35]; /* 92-126: reserved */
u_int16_t atap_rmsn_supp; /* 127: remov. media status notif. */
#define WDC_RMSN_SUPP_MASK 0x0003
#define WDC_RMSN_SUPP 0x0001
u_int16_t atap_sec_st; /* 128: security status */
#define WDC_SEC_LEV_MAX 0x0100
#define WDC_SEC_ESE_SUPP 0x0020
#define WDC_SEC_EXP 0x0010
#define WDC_SEC_FROZEN 0x0008
#define WDC_SEC_LOCKED 0x0004
#define WDC_SEC_EN 0x0002
#define WDC_SEC_SUPP 0x0001
};