NetBSD/sys/dev/pci/eapreg.h

322 lines
10 KiB
C

/* $NetBSD: eapreg.h,v 1.13 2008/04/28 20:23:54 martin Exp $ */
/*
* Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson <augustss@NetBSD.org> and Charles M. Hannum.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* ES1370/ES1371/ES1373 registers
*/
#define EAP_ICSC 0x00 /* interrupt / chip select control */
#define EAP_SERR_DISABLE 0x00000001 /* do not present SERR on PCI bus */
#define E1371_PCICLKDIS 0x00000001 /* PCIclk to essential modules only*/
#define EAP_CDC_EN 0x00000002 /* enable codec i/f */
#define E1371_XTALCKDIS 0x00000002 /* gate xtal clk to all modules */
#define EAP_JYSTK_EN 0x00000004
#define EAP_UART_EN 0x00000008
#define EAP_ADC_EN 0x00000010
#define EAP_DAC2_EN 0x00000020 /* intended as CODEC DAC */
#define EAP_DAC1_EN 0x00000040 /* intended as CODEC FM DAC */
#define EAP_BREQ 0x00000080
#define EAP_XCTL0 0x00000100 /* a gp out pin on 1370 */
#define EAP_M_CB 0x00000200 /* rec src mpeg (!adc) */
#define E1371_PDLEV(n) ((n)<<8) /* pwr dwn lvl D0 - D3 */
#define E1371_PDLEVBITS 0x00000300
#define EAP_CCB_INTRM 0x00000400 /* enable CCB module voice intrs */
#define EAP_DAC_SYNC 0x00000800
#define E1371_M_CB 0x00000800 /* rec src i2s (!adc); cf EAP_M_CB!*/
#define EAP_WTSRSEL 0x00003000
#define EAP_WTSRSEL_5 0x00000000
#define EAP_WTSRSEL_11 0x00001000
#define EAP_WTSRSEL_22 0x00002000
#define EAP_WTSRSEL_44 0x00003000
#define E1371_PWR_INTRM 0x00001000 /* ena intr on pwr lvl change */
#define E1371_ADC_STOP 0x00002000 /* cf EAP_ADC_STOP! */
#define EAP_M_SBB 0x00004000
#define E1371_SYNC_RES 0x00004000
#define EAP_MSFMTSEL 0x00008000
#define EAP_DAC_EN(i) (EAP_DAC2_EN << (i)) /* yes, it's twisted */
#define EAP_SET_PCLKDIV(n) (((n)&0x1fff)<<16)
#define EAP_GET_PCLKDIV(n) (((n)>>16)&0x1fff)
#define EAP_PCLKBITS 0x1fff0000
#define E1371_OUT_GPIO(n) (((n)&0xf)<<16)
#define E1371_IN_GPIO(n) (((n)>>20)&0xf)
#define E1371_OUTGPIOBITS 0x000f0000
#define E1371_INGPIOBITS 0x00f00000
#define E1371_JOY_ASEL(n) (((n)&3)<<24)
#define E1371_JOY_ASELBITS 0x03000000
#define E1373_SPDIFEN_B 0x04000000 /* spdif generated (!spdif thru) */
#define E1373_RECEN_B 0x08000000 /* !(rec monitor to spdif out) */
#define E1373_TEST_BIT 0x10000000 /* 0 except to test block preamble */
#define E1373_BYPASS_R 0x20000000 /* rec bypass rate converter */
#define EAP_XCTL1 0x40000000 /* a gp out pin on 1370 */
#define E1373_BYPASS_P2 0x40000000 /* play2 bypass rate converter */
#define EAP_ADC_STOP 0x80000000
#define E1373_BYPASS_P1 0x80000000 /* play1 bypass rate converter */
#define EAP_ICSS 0x04 /* interrupt / chip select status */
/* on the 5880 control / status */
#define EAP_I_ADC 0x00000001
#define EAP_I_DAC2 0x00000002
#define EAP_I_DAC1 0x00000004
#define EAP_I_UART 0x00000008
#define EAP_I_MCCB 0x00000010
#define EAP_VC 0x00000060
#define EAP_CWRIP 0x00000100
#define E1371_SYNC_ERR 0x00000100
#define EAP_CBUSY 0x00000200 /* tied 1 on 1371, 1373 */
#define EAP_CSTAT 0x00000400 /* tied 1 on 1371, 1373 */
#define E1373_GPIO_INT(n) (((n)>>12)&0xf) /* which gpios interrupted */
#define E1373_TEST_MODE 0x00010000
#define E1373_TEST_SPDIF 0x00020000
#define E1373_ENABLE_SPDIF 0x00040000
#define E1373_GPIO_INTEN(n) (((n)&0xf)<<20)
#define EAP_CT5880_AC97_RESET 0x20000000
#define EAP_INTR 0x80000000
#define EAP_UART_DATA 0x08
#define EAP_UART_STATUS 0x09
#define EAP_US_RXRDY 0x01
#define EAP_US_TXRDY 0x02
#define EAP_US_TXINT 0x04
#define EAP_US_RXINT 0x80
#define EAP_UART_CONTROL 0x09
#define EAP_UC_CNTRL 0x03
#define EAP_UC_TXINTEN 0x20
#define EAP_UC_TXINTENBITS 0x60
#define EAP_UC_RXINTEN 0x80
#define EAP_UART_RESERVED 0x0a
#define EAP_UR_TEST_MODE 0x01
#define EAP_MEMPAGE 0x0c
#define EAP_CODEC 0x10
#define EAP_SET_CODEC(a,d) (((a)<<8) | (d))
/*
* ES1371/ES1373 registers
*/
#define E1371_CODEC 0x14
#define E1371_CODEC_VALID 0x80000000
#define E1371_CODEC_WIP 0x40000000
#define E1371_CODEC_READ 0x00800000
#define E1371_SET_CODEC(a,d) (((a)<<16) | (d))
#define E1371_SRC 0x10
#define E1371_SRC_RAMWE 0x01000000
#define E1371_SRC_RBUSY 0x00800000
#define E1371_SRC_DISABLE 0x00400000
#define E1371_SRC_DISP1 0x00200000
#define E1371_SRC_DISP2 0x00100000
#define E1371_SRC_DISREC 0x00080000
#define E1371_SRC_DATAMASK 0x0000ffff
#define E1371_SRC_ADDR(a) ((a)<<25)
#define E1371_SRC_DATA(d) ((d) & E1371_SRC_DATAMASK)
#define E1371_SRC_CTLMASK (E1371_SRC_DISABLE | E1371_SRC_DISP1 | \
E1371_SRC_DISP2 | E1371_SRC_DISREC)
#define E1371_SRC_STATE_MASK 0x00870000
#define E1371_SRC_STATE_OK 0x00010000
#define E1371_LEGACY 0x18
/*
* ES1371/ES1373 sample rate converter registers
*/
#define ESRC_ADC 0x78
#define ESRC_DAC1 0x70
#define ESRC_DAC2 0x74
#define ESRC_ADC_VOLL 0x6c
#define ESRC_ADC_VOLR 0x6d
#define ESRC_DAC1_VOLL 0x7c
#define ESRC_DAC1_VOLR 0x7d
#define ESRC_DAC2_VOLL 0x7e
#define ESRC_DAC2_VOLR 0x7f
#define ESRC_TRUNC_N 0x00
#define ESRC_IREGS 0x01
#define ESRC_ACF 0x02
#define ESRC_VFF 0x03
#define ESRC_SET_TRUNC(n) ((n)<<9)
#define ESRC_SET_N(n) ((n)<<4)
#define ESRC_SMF 0x8000
#define ESRC_SET_VFI(n) ((n)<<10)
#define ESRC_SET_ACI(n) (n)
#define ESRC_SET_ADC_VOL(n) ((n)<<8)
#define ESRC_SET_DAC_VOLI(n) ((n)<<12)
#define ESRC_SET_DAC_VOLF(n) (n)
#define SRC_MAGIC ((1<15)|(1<<13)|(1<<11)|(1<<9))
#define EAP_SIC 0x20
#define EAP_P1_S_MB 0x00000001
#define EAP_P1_S_EB 0x00000002
#define EAP_P2_S_MB 0x00000004
#define EAP_P2_S_EB 0x00000008
#define EAP_R1_S_MB 0x00000010
#define EAP_R1_S_EB 0x00000020
#define EAP_P2_DAC_SEN 0x00000040
#define EAP_P1_SCT_RLD 0x00000080
#define EAP_P1_INTR_EN 0x00000100
#define EAP_P2_INTR_EN 0x00000200
#define EAP_R1_INTR_EN 0x00000400
#define EAP_P1_PAUSE 0x00000800
#define EAP_P2_PAUSE 0x00001000
#define EAP_P1_LOOP_SEL 0x00002000
#define EAP_P2_LOOP_SEL 0x00004000
#define EAP_R1_LOOP_SEL 0x00008000
#define EAP_S_EB(i) (EAP_P2_S_EB >> 2*(i))
#define EAP_S_MB(i) (EAP_P2_S_MB >> 2*(i))
#define EAP_P_INTR_EN(i) (EAP_P2_INTR_EN >> (i))
#define EAP_SET_P2_ST_INC(i) ((i) << 16)
#define EAP_SET_P2_END_INC(i) ((i) << 19)
#define EAP_INC_BITS 0x003f0000
#define EAP_DAC1_CSR 0x24
#define EAP_DAC2_CSR 0x28
#define EAP_ADC_CSR 0x2c
#define EAP_GET_CURRSAMP(r) ((r) >> 16)
#define EAP_DAC_PAGE 0xc
#define EAP_ADC_PAGE 0xd
#define EAP_UART_PAGE1 0xe
#define EAP_UART_PAGE2 0xf
#define EAP_DAC1_ADDR 0x30
#define EAP_DAC1_SIZE 0x34
#define EAP_DAC2_ADDR 0x38
#define EAP_DAC2_SIZE 0x3c
#define EAP_ADC_ADDR 0x30
#define EAP_ADC_SIZE 0x34
#define EAP_SET_SIZE(c,s) (((c)<<16) | (s))
#define EAP_READ_TIMEOUT 5000
#define EAP_WRITE_TIMEOUT 5000
#define EAP_XTAL_FREQ 1411200 /* 22.5792 / 16 MHz */
/* AK4531 registers */
#define AK_MASTER_L 0x00
#define AK_MASTER_R 0x01
#define AK_VOICE_L 0x02
#define AK_VOICE_R 0x03
#define AK_FM_L 0x04
#define AK_FM_R 0x05
#define AK_CD_L 0x06
#define AK_CD_R 0x07
#define AK_LINE_L 0x08
#define AK_LINE_R 0x09
#define AK_AUX_L 0x0a
#define AK_AUX_R 0x0b
#define AK_MONO1 0x0c
#define AK_MONO2 0x0d
#define AK_MIC 0x0e
#define AK_MONO 0x0f
#define AK_OUT_MIXER1 0x10
#define AK_M_FM_L 0x40
#define AK_M_FM_R 0x20
#define AK_M_LINE_L 0x10
#define AK_M_LINE_R 0x08
#define AK_M_CD_L 0x04
#define AK_M_CD_R 0x02
#define AK_M_MIC 0x01
#define AK_OUT_MIXER2 0x11
#define AK_M_AUX_L 0x20
#define AK_M_AUX_R 0x10
#define AK_M_VOICE_L 0x08
#define AK_M_VOICE_R 0x04
#define AK_M_MONO2 0x02
#define AK_M_MONO1 0x01
#define AK_IN_MIXER1_L 0x12
#define AK_IN_MIXER1_R 0x13
#define AK_IN_MIXER2_L 0x14
#define AK_IN_MIXER2_R 0x15
#define AK_M_TMIC 0x80
#define AK_M_TMONO1 0x40
#define AK_M_TMONO2 0x20
#define AK_M2_AUX_L 0x10
#define AK_M2_AUX_R 0x08
#define AK_M_VOICE 0x04
#define AK_M2_MONO2 0x02
#define AK_M2_MONO1 0x01
#define AK_RESET 0x16
#define AK_PD 0x02
#define AK_NRST 0x01
#define AK_CS 0x17
#define AK_ADSEL 0x18
#define AK_MGAIN 0x19
#define AK_NPORTS 0x20
/* Not sensical for AC97? */
#define VOL_TO_ATT5(v) (0x1f - ((v) >> 3))
#define VOL_TO_GAIN5(v) VOL_TO_ATT5(v)
#define ATT5_TO_VOL(v) ((0x1f - (v)) << 3)
#define GAIN5_TO_VOL(v) ATT5_TO_VOL(v)
#define VOL_0DB 200
/* Futzable parms */
#define EAP_MASTER_VOL 0
#define EAP_VOICE_VOL 1
#define EAP_FM_VOL 2
#define EAP_VIDEO_VOL 2 /* ES1371 */
#define EAP_CD_VOL 3
#define EAP_LINE_VOL 4
#define EAP_AUX_VOL 5
#define EAP_MIC_VOL 6
#define EAP_RECORD_SOURCE 7
#define EAP_INPUT_SOURCE 8
#define EAP_MIC_PREAMP 9
#define EAP_OUTPUT_CLASS 10
#define EAP_RECORD_CLASS 11
#define EAP_INPUT_CLASS 12
#define MIDI_BUSY_WAIT 100
#define MIDI_BUSY_DELAY 100 /* Delay when UART is busy */
#define EAP_EV1938_A 0x00
#define EAP_CT5880_C 0x02
#define EAP_CT5880_D 0x03
#define EAP_CT5880_E 0x04
#define EAP_ES1373_A 0x04
#define EAP_ES1373_B 0x06
#define EAP_CT5880_A 0x07
#define EAP_ES1373_8 0x08
#define EAP_ES1371_B 0x09