NetBSD/sys/dev/pci/iteide.c
grant 9204390fe4 add iteide(4) driver for ITE8212-based IDE controllers. from
OpenBSD, ported to NetBSD by me.

ok'd by bouyer@, thorpej@.
2004-12-01 22:27:45 +00:00

255 lines
7.7 KiB
C

/* $NetBSD: iteide.c,v 1.1 2004/12/01 22:27:45 grant Exp $ */
/*
* Copyright (c) 2004 The NetBSD Foundation, Inc.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Grant Beattie.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/pciidereg.h>
#include <dev/pci/pciidevar.h>
#include <dev/pci/pciide_ite_reg.h>
static void ite_chip_map(struct pciide_softc*, struct pci_attach_args*);
static void ite_setup_channel(struct ata_channel*);
static int iteide_match(struct device *, struct cfdata *, void *);
static void iteide_attach(struct device *, struct device *, void *);
CFATTACH_DECL(iteide, sizeof(struct pciide_softc),
iteide_match, iteide_attach, NULL, NULL);
static const struct pciide_product_desc pciide_ite_products[] = {
{ PCI_PRODUCT_ITE_IT8212,
0,
"Integrated Technology Express IDE controller",
ite_chip_map,
},
{ 0,
0,
NULL,
NULL
}
};
static int
iteide_match(struct device *parent, struct cfdata *match, void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ITE &&
PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE) {
if (pciide_lookup_product(pa->pa_id, pciide_ite_products))
return (2);
}
return (0);
}
static void
iteide_attach(struct device *parent, struct device *self, void *aux)
{
struct pci_attach_args *pa = aux;
struct pciide_softc *sc = (struct pciide_softc *)self;
pciide_common_attach(sc, pa,
pciide_lookup_product(pa->pa_id, pciide_ite_products));
}
static void
ite_chip_map(struct pciide_softc *sc, struct pci_attach_args *pa)
{
struct pciide_channel *cp;
int channel;
pcireg_t interface;
bus_size_t cmdsize, ctlsize;
pcireg_t cfg, modectl;
/* fake interface since IT8212 claims to be a RAID device */
interface = PCIIDE_INTERFACE_BUS_MASTER_DMA |
PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
cfg = pci_conf_read(sc->sc_pc, sc->sc_tag, IT_CFG);
modectl = pci_conf_read(sc->sc_pc, sc->sc_tag, IT_MODE);
ATADEBUG_PRINT(("%s: cfg=0x%x, modectl=0x%x\n",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, cfg & IT_CFG_MASK,
modectl & IT_MODE_MASK), DEBUG_PROBE);
if (pciide_chipen(sc, pa) == 0)
return;
aprint_normal("%s: bus-master DMA support present",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname);
pciide_mapreg_dma(sc, pa);
aprint_normal("\n");
sc->sc_wdcdev.sc_atac.atac_cap = ATAC_CAP_DATA16 | ATAC_CAP_DATA32;
if (sc->sc_dma_ok) {
sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA | ATAC_CAP_UDMA;
sc->sc_wdcdev.irqack = pciide_irqack;
}
sc->sc_wdcdev.sc_atac.atac_pio_cap = 4;
sc->sc_wdcdev.sc_atac.atac_dma_cap = 2;
sc->sc_wdcdev.sc_atac.atac_udma_cap = 6;
sc->sc_wdcdev.sc_atac.atac_set_modes = ite_setup_channel;
sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray;
sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS;
wdc_allocate_regs(&sc->sc_wdcdev);
/* Disable RAID */
modectl &= ~IT_MODE_RAID1;
/* Disable CPU firmware mode */
modectl &= ~IT_MODE_CPU;
pci_conf_write(sc->sc_pc, sc->sc_tag, IT_MODE, modectl);
for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels; channel++) {
cp = &sc->pciide_channels[channel];
if (pciide_chansetup(sc, channel, interface) == 0)
continue;
pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
pciide_pci_intr);
}
/* Re-read configuration registers after channels setup */
cfg = pci_conf_read(sc->sc_pc, sc->sc_tag, IT_CFG);
modectl = pci_conf_read(sc->sc_pc, sc->sc_tag, IT_MODE);
ATADEBUG_PRINT(("%s: cfg=0x%x, modectl=0x%x\n",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, cfg & IT_CFG_MASK,
modectl & IT_MODE_MASK), DEBUG_PROBE);
}
static void
ite_setup_channel(struct ata_channel *chp)
{
struct ata_drive_datas *drvp;
int drive, mode = 0;
u_int32_t idedma_ctl;
struct pciide_channel *cp = CHAN_TO_PCHAN(chp);
struct pciide_softc *sc = CHAN_TO_PCIIDE(chp);
int channel = chp->ch_channel;
pcireg_t cfg, modectl;
pcireg_t tim;
cfg = pci_conf_read(sc->sc_pc, sc->sc_tag, IT_CFG);
modectl = pci_conf_read(sc->sc_pc, sc->sc_tag, IT_MODE);
tim = pci_conf_read(sc->sc_pc, sc->sc_tag, IT_TIM(channel));
ATADEBUG_PRINT(("%s:%d: tim=0x%x\n",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname,
channel, tim), DEBUG_PROBE);
/* Setup DMA if needed */
pciide_channel_dma_setup(cp);
/* Clear all bits for this channel */
idedma_ctl = 0;
/* Per channel settings */
for (drive = 0; drive < 2; drive++) {
drvp = &chp->ch_drive[drive];
/* If no drive, skip */
if ((drvp->drive_flags & DRIVE) == 0)
continue;
if ((chp->ch_atac->atac_cap & ATAC_CAP_UDMA) != 0 &&
(drvp->drive_flags & DRIVE_UDMA) != 0) {
/* Setup UltraDMA mode */
drvp->drive_flags &= ~DRIVE_DMA;
modectl &= ~IT_MODE_DMA(channel, drive);
#if 0
/* Check cable, only works in CPU firmware mode */
if (drvp->UDMA_mode > 2 &&
(cfg & IT_CFG_CABLE(channel, drive)) == 0) {
ATADEBUG_PRINT(("(%s:%d:%d): "
"80-wire cable not detected\n",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname,
channel, drive), DEBUG_PROBE);
drvp->UDMA_mode = 2;
}
#endif
if (drvp->UDMA_mode >= 5)
tim |= IT_TIM_UDMA5(drive);
else
tim &= ~IT_TIM_UDMA5(drive);
mode = drvp->PIO_mode;
} else if ((chp->ch_atac->atac_cap & ATAC_CAP_DMA) != 0 &&
(drvp->drive_flags & DRIVE_DMA) != 0) {
/* Setup multiword DMA mode */
drvp->drive_flags &= ~DRIVE_UDMA;
modectl |= IT_MODE_DMA(channel, drive);
/* mode = min(pio, dma + 2) */
if (drvp->PIO_mode <= (drvp->DMA_mode + 2))
mode = drvp->PIO_mode;
else
mode = drvp->DMA_mode + 2;
} else {
goto pio;
}
idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
pio:
/* Setup PIO mode */
if (mode <= 2) {
drvp->DMA_mode = 0;
drvp->PIO_mode = 0;
mode = 0;
} else {
drvp->PIO_mode = mode;
drvp->DMA_mode = mode - 2;
}
/* Enable IORDY if PIO mode >= 3 */
if (drvp->PIO_mode >= 3)
cfg |= IT_CFG_IORDY(channel);
}
ATADEBUG_PRINT(("%s: tim=0x%x\n",
sc->sc_wdcdev.sc_atac.atac_dev.dv_xname, tim), DEBUG_PROBE);
pci_conf_write(sc->sc_pc, sc->sc_tag, IT_CFG, cfg);
pci_conf_write(sc->sc_pc, sc->sc_tag, IT_MODE, modectl);
pci_conf_write(sc->sc_pc, sc->sc_tag, IT_TIM(channel), tim);
if (idedma_ctl != 0) {
/* Add software bits in status register */
bus_space_write_1(sc->sc_dma_iot,
cp->dma_iohs[IDEDMA_CTL], 0, idedma_ctl);
}
}