355 lines
9.9 KiB
C
355 lines
9.9 KiB
C
/* $NetBSD: xhci_pci.c,v 1.29 2021/04/24 23:36:57 thorpej Exp $ */
|
|
/* OpenBSD: xhci_pci.c,v 1.4 2014/07/12 17:38:51 yuo Exp */
|
|
|
|
/*
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (lennart@augustsson.net) at
|
|
* Carlstedt Research & Technology.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: xhci_pci.c,v 1.29 2021/04/24 23:36:57 thorpej Exp $");
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_xhci_pci.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/queue.h>
|
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcidevs.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdivar.h>
|
|
#include <dev/usb/usb_mem.h>
|
|
|
|
#include <dev/usb/xhcireg.h>
|
|
#include <dev/usb/xhcivar.h>
|
|
|
|
struct xhci_pci_softc {
|
|
struct xhci_softc sc_xhci;
|
|
pci_chipset_tag_t sc_pc;
|
|
pcitag_t sc_tag;
|
|
void *sc_ih;
|
|
pci_intr_handle_t *sc_pihp;
|
|
};
|
|
|
|
static int
|
|
xhci_pci_match(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct pci_attach_args *pa = (struct pci_attach_args *) aux;
|
|
|
|
if (PCI_CLASS(pa->pa_class) == PCI_CLASS_SERIALBUS &&
|
|
PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_SERIALBUS_USB &&
|
|
PCI_INTERFACE(pa->pa_class) == PCI_INTERFACE_XHCI)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
xhci_pci_port_route(struct xhci_pci_softc *psc)
|
|
{
|
|
struct xhci_softc * const sc = &psc->sc_xhci;
|
|
|
|
pcireg_t val;
|
|
|
|
/*
|
|
* Check USB3 Port Routing Mask register that indicates the ports
|
|
* can be changed from OS, and turn on by USB3 Port SS Enable register.
|
|
*/
|
|
val = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_XHCI_INTEL_USB3PRM);
|
|
aprint_debug_dev(sc->sc_dev,
|
|
"USB3PRM / USB3.0 configurable ports: 0x%08x\n", val);
|
|
|
|
pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_XHCI_INTEL_USB3_PSSEN, val);
|
|
val = pci_conf_read(psc->sc_pc, psc->sc_tag,PCI_XHCI_INTEL_USB3_PSSEN);
|
|
aprint_debug_dev(sc->sc_dev,
|
|
"USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x%08x\n", val);
|
|
|
|
/*
|
|
* Check USB2 Port Routing Mask register that indicates the USB2.0
|
|
* ports to be controlled by xHCI HC, and switch them to xHCI HC.
|
|
*/
|
|
val = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_XHCI_INTEL_USB2PRM);
|
|
aprint_debug_dev(sc->sc_dev,
|
|
"XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:"
|
|
"0x%08x\n", val);
|
|
pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_XHCI_INTEL_XUSB2PR, val);
|
|
val = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_XHCI_INTEL_XUSB2PR);
|
|
aprint_debug_dev(sc->sc_dev,
|
|
"XUSB2PR / USB2.0 ports under xHCI: 0x%08x\n", val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
xhci_pci_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct xhci_pci_softc * const psc = device_private(self);
|
|
struct xhci_softc * const sc = &psc->sc_xhci;
|
|
struct pci_attach_args *const pa = (struct pci_attach_args *)aux;
|
|
const pci_chipset_tag_t pc = pa->pa_pc;
|
|
const pcitag_t tag = pa->pa_tag;
|
|
char const *intrstr;
|
|
pcireg_t csr, memtype, usbrev;
|
|
uint32_t hccparams;
|
|
int counts[PCI_INTR_TYPE_SIZE];
|
|
char intrbuf[PCI_INTRSTR_LEN];
|
|
bus_addr_t memaddr;
|
|
int flags, msixoff;
|
|
int err;
|
|
|
|
sc->sc_dev = self;
|
|
|
|
pci_aprint_devinfo(pa, "USB Controller");
|
|
|
|
/* Check for quirks */
|
|
sc->sc_quirks = 0;
|
|
|
|
csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
|
|
if ((csr & PCI_COMMAND_MEM_ENABLE) == 0) {
|
|
/*
|
|
* Enable address decoding for memory range in case BIOS or
|
|
* UEFI didn't set it.
|
|
*/
|
|
csr = pci_conf_read(pa->pa_pc, pa->pa_tag,
|
|
PCI_COMMAND_STATUS_REG);
|
|
csr |= PCI_COMMAND_MEM_ENABLE;
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
|
|
csr);
|
|
}
|
|
|
|
/* map MMIO registers */
|
|
memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, PCI_CBMEM);
|
|
if (PCI_MAPREG_TYPE(memtype) != PCI_MAPREG_TYPE_MEM) {
|
|
sc->sc_ios = 0;
|
|
aprint_error_dev(self, "BAR not 64 or 32-bit MMIO\n");
|
|
return;
|
|
}
|
|
|
|
sc->sc_iot = pa->pa_memt;
|
|
if (pci_mapreg_info(pa->pa_pc, pa->pa_tag, PCI_CBMEM, memtype,
|
|
&memaddr, &sc->sc_ios, &flags) != 0) {
|
|
sc->sc_ios = 0;
|
|
aprint_error_dev(self, "can't get map info\n");
|
|
return;
|
|
}
|
|
|
|
if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_MSIX, &msixoff,
|
|
NULL)) {
|
|
pcireg_t msixtbl;
|
|
uint32_t table_offset;
|
|
int bir;
|
|
|
|
msixtbl = pci_conf_read(pa->pa_pc, pa->pa_tag,
|
|
msixoff + PCI_MSIX_TBLOFFSET);
|
|
table_offset = msixtbl & PCI_MSIX_TBLOFFSET_MASK;
|
|
bir = msixtbl & PCI_MSIX_TBLBIR_MASK;
|
|
/* Shrink map area for MSI-X table */
|
|
if (bir == PCI_MAPREG_NUM(PCI_CBMEM))
|
|
sc->sc_ios = table_offset;
|
|
}
|
|
if (bus_space_map(sc->sc_iot, memaddr, sc->sc_ios, flags,
|
|
&sc->sc_ioh)) {
|
|
sc->sc_ios = 0;
|
|
aprint_error_dev(self, "can't map mem space\n");
|
|
return;
|
|
}
|
|
|
|
psc->sc_pc = pc;
|
|
psc->sc_tag = tag;
|
|
|
|
hccparams = bus_space_read_4(sc->sc_iot, sc->sc_ioh, XHCI_HCCPARAMS);
|
|
|
|
if (XHCI_HCC_AC64(hccparams) != 0) {
|
|
aprint_verbose_dev(self, "64-bit DMA");
|
|
if (pci_dma64_available(pa)) {
|
|
sc->sc_bus.ub_dmatag = pa->pa_dmat64;
|
|
aprint_verbose("\n");
|
|
} else {
|
|
aprint_verbose(" - limited\n");
|
|
sc->sc_bus.ub_dmatag = pa->pa_dmat;
|
|
}
|
|
} else {
|
|
aprint_verbose_dev(self, "32-bit DMA\n");
|
|
sc->sc_bus.ub_dmatag = pa->pa_dmat;
|
|
}
|
|
|
|
/* Enable the device. */
|
|
pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG,
|
|
csr | PCI_COMMAND_MASTER_ENABLE);
|
|
|
|
for (int i = 0; i < PCI_INTR_TYPE_SIZE; i++) {
|
|
counts[i] = 1;
|
|
}
|
|
#ifdef XHCI_DISABLE_MSI
|
|
counts[PCI_INTR_TYPE_MSI] = 0;
|
|
#endif
|
|
#ifdef XHCI_DISABLE_MSIX
|
|
counts[PCI_INTR_TYPE_MSIX] = 0;
|
|
#endif
|
|
|
|
/* Allocate and establish the interrupt. */
|
|
if (pci_intr_alloc(pa, &psc->sc_pihp, counts, PCI_INTR_TYPE_MSIX)) {
|
|
aprint_error_dev(self, "can't allocate handler\n");
|
|
goto fail;
|
|
}
|
|
intrstr = pci_intr_string(pc, psc->sc_pihp[0], intrbuf,
|
|
sizeof(intrbuf));
|
|
psc->sc_ih = pci_intr_establish_xname(pc, psc->sc_pihp[0], IPL_USB,
|
|
xhci_intr, sc, device_xname(sc->sc_dev));
|
|
if (psc->sc_ih == NULL) {
|
|
pci_intr_release(pc, psc->sc_pihp, 1);
|
|
psc->sc_pihp = NULL;
|
|
aprint_error_dev(self, "couldn't establish interrupt");
|
|
if (intrstr != NULL)
|
|
aprint_error(" at %s", intrstr);
|
|
aprint_error("\n");
|
|
goto fail;
|
|
}
|
|
aprint_normal_dev(self, "interrupting at %s\n", intrstr);
|
|
|
|
usbrev = pci_conf_read(pc, tag, PCI_USBREV) & PCI_USBREV_MASK;
|
|
switch (usbrev) {
|
|
case PCI_USBREV_3_0:
|
|
sc->sc_bus.ub_revision = USBREV_3_0;
|
|
break;
|
|
case PCI_USBREV_3_1:
|
|
sc->sc_bus.ub_revision = USBREV_3_1;
|
|
break;
|
|
default:
|
|
if (usbrev < PCI_USBREV_3_0) {
|
|
aprint_error_dev(self, "Unknown revision (%02x). Set to 3.0.\n",
|
|
usbrev);
|
|
sc->sc_bus.ub_revision = USBREV_3_0;
|
|
} else {
|
|
/* Default to the latest revision */
|
|
aprint_normal_dev(self,
|
|
"Unknown revision (%02x). Set to 3.1.\n", usbrev);
|
|
sc->sc_bus.ub_revision = USBREV_3_1;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* Intel chipset requires SuperSpeed enable and USB2 port routing */
|
|
switch (PCI_VENDOR(pa->pa_id)) {
|
|
case PCI_VENDOR_INTEL:
|
|
sc->sc_quirks |= XHCI_QUIRK_INTEL;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
err = xhci_init(sc);
|
|
if (err) {
|
|
aprint_error_dev(self, "init failed, error=%d\n", err);
|
|
goto fail;
|
|
}
|
|
|
|
if ((sc->sc_quirks & XHCI_QUIRK_INTEL) != 0)
|
|
xhci_pci_port_route(psc);
|
|
|
|
if (!pmf_device_register1(self, xhci_suspend, xhci_resume,
|
|
xhci_shutdown))
|
|
aprint_error_dev(self, "couldn't establish power handler\n");
|
|
|
|
/* Attach usb buses. */
|
|
sc->sc_child = config_found(self, &sc->sc_bus, usbctlprint, CFARG_EOL);
|
|
|
|
sc->sc_child2 = config_found(self, &sc->sc_bus2, usbctlprint,
|
|
CFARG_EOL);
|
|
|
|
return;
|
|
|
|
fail:
|
|
if (psc->sc_ih != NULL) {
|
|
pci_intr_disestablish(psc->sc_pc, psc->sc_ih);
|
|
psc->sc_ih = NULL;
|
|
}
|
|
if (psc->sc_pihp != NULL) {
|
|
pci_intr_release(psc->sc_pc, psc->sc_pihp, 1);
|
|
psc->sc_pihp = NULL;
|
|
}
|
|
if (sc->sc_ios) {
|
|
bus_space_unmap(sc->sc_iot, sc->sc_ioh, sc->sc_ios);
|
|
sc->sc_ios = 0;
|
|
}
|
|
return;
|
|
}
|
|
|
|
static int
|
|
xhci_pci_detach(device_t self, int flags)
|
|
{
|
|
struct xhci_pci_softc * const psc = device_private(self);
|
|
struct xhci_softc * const sc = &psc->sc_xhci;
|
|
int rv;
|
|
|
|
if (sc->sc_ios != 0) {
|
|
rv = xhci_detach(sc, flags);
|
|
if (rv)
|
|
return rv;
|
|
|
|
pmf_device_deregister(self);
|
|
|
|
xhci_shutdown(self, flags);
|
|
|
|
#if 0
|
|
/* Disable interrupts, so we don't get any spurious ones. */
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh,
|
|
OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS);
|
|
#endif
|
|
}
|
|
|
|
if (psc->sc_ih != NULL) {
|
|
pci_intr_disestablish(psc->sc_pc, psc->sc_ih);
|
|
psc->sc_ih = NULL;
|
|
}
|
|
if (psc->sc_pihp != NULL) {
|
|
pci_intr_release(psc->sc_pc, psc->sc_pihp, 1);
|
|
psc->sc_pihp = NULL;
|
|
}
|
|
if (sc->sc_ios) {
|
|
bus_space_unmap(sc->sc_iot, sc->sc_ioh, sc->sc_ios);
|
|
sc->sc_ios = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
CFATTACH_DECL3_NEW(xhci_pci, sizeof(struct xhci_pci_softc),
|
|
xhci_pci_match, xhci_pci_attach, xhci_pci_detach, xhci_activate, NULL,
|
|
xhci_childdet, DVF_DETACH_SHUTDOWN);
|