NetBSD/sys/dev/ic/cyreg.h

77 lines
2.8 KiB
C

/* $NetBSD: cyreg.h,v 1.5 2005/12/11 12:21:26 christos Exp $ */
/*-
* Copyright (c) 1995 Bruce Evans.
* All rights reserved.
*
* Modified by Timo Rossi, 1996
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Id: cyreg.h,v 1.1 1995/07/05 12:15:51 bde Exp
*/
/*
* Definitions for Cyclades Cyclom-Y serial boards.
*/
#define CY8_SVCACKR 0x100
#define CY8_SVCACKT 0x200
#define CY8_SVCACKM 0x300
/* twice this in PCI mode (shifed BUSTYPE bits left) */
#define CY_CD1400_MEMSPACING 0x400
/* adjustment value for accessing the last 4 cd1400s on Cyclom-32 */
#define CY32_ADDR_FIX 0xe00
#define CY16_RESET 0x1400
#define CY_CLEAR_INTR 0x1800 /* intr ack address */
#define CY_MAX_CD1400s 8 /* for Cyclom-32 */
/* I/O location for enabling interrupts on PCI Cyclom cards */
#define CY_PCI_INTENA 0x68
#define CY_PCI_INTENA_9050 0x4c
/* Cyclom-Y Custom Register for PLX ID (PCI only) */
#define CY_PLX_VER 0x3400 /* PLX version */
#define CY_PLX_9050 0x0b
#define CY_PLX_9060 0x0c
#define CY_PLX_9080 0x0d
#define CY_CLOCK 25000000 /* baud rate clock */
#define CY_CLOCK_60 60000000 /* new CD14000 */
#define CY_MEMSIZE 0x2000
/*
* bustype is actually the shift count for the offset
* ISA card addresses are multiplied by 2 (shifted 1 bit)
* and PCI addresses multiplied by 4 (shifted 2 bits)
*/
#define CY_BUSTYPE_ISA 0
#define CY_BUSTYPE_PCI 1