377 lines
14 KiB
Plaintext
377 lines
14 KiB
Plaintext
.\" $NetBSD: prep,v 1.11 2012/11/03 07:59:46 mbalmer Exp $
|
|
.\"
|
|
.\" Copyright (c) 2001-2002 The NetBSD Foundation, Inc.
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
.\" POSSIBILITY OF SUCH DAMAGE.
|
|
.\"
|
|
.
|
|
First and foremost, before beginning the installation process,
|
|
.Em make sure you have a reliable backup
|
|
of any data on the target system that you wish to keep.
|
|
Mistakes in partitioning may lead to data loss.
|
|
.Ss2 Preparation for the Technologic Systems TS-7200
|
|
The TS-7200 uses RedBoot firmware which supports loading the kernel via
|
|
serial port and the on-chip Ethernet.
|
|
These notes assume that the Ethernet will be used to load the kernel.
|
|
RedBoot can either use TFTP or HTTP to load the kernel via the network.
|
|
.Pp
|
|
These notes also assume the TS-7200 will be run from the CompactFlash;
|
|
that a FFS filesystem on the CompactFlash card will provide the root file
|
|
system. The minimum size of the CompactFlash card is 64MB with 512MB being
|
|
the recommended minimum size if attempting a full installation.
|
|
.Pp
|
|
The first step to install
|
|
.Nx
|
|
is to interrupt normal
|
|
system bootup and drop to the RedBoot prompt by hitting Ctrl-C immediately
|
|
after applying power. To load both the installation kernel and the generic
|
|
post-installation TS7200 kernel you will need network connectivity from RedBoot which
|
|
you will have to configure using the RedBoot
|
|
.Ic fconfig
|
|
command; see the RedBoot documentation for more information.
|
|
.Pp
|
|
A compressed kernel image and loader suitable for placing into
|
|
flash is provided with the distribution.
|
|
Use of this image is optional;
|
|
a kernel that can be directly loaded over the network
|
|
by RedBoot is also provided.
|
|
.Pp
|
|
The image for the TS-7200 can be found under the
|
|
.Nx*M
|
|
\*V distribution directory in
|
|
.Pa \*M/binary/gzimg/gzimg_TS7200_flash_0x60660000.gz ,
|
|
and corresponds to the kernel in
|
|
.Pa \*M/binary/kernel/netbsd-TS7200.gz .
|
|
The following steps
|
|
describe how to copy the compressed kernel image into flash.
|
|
.Pp
|
|
.(enum
|
|
Uncompress the gzimg file and place it into the TFTP server's
|
|
download area (note, the kernel inside the gzimg is still
|
|
compressed after this step).
|
|
.Pp
|
|
.Dl server# Ic gzcat gzimg_TS7200_flash_0x60660000.gz \*[Gt] /tftpboot/gzimg_TS7200_flash_0x60660000
|
|
.It
|
|
Load the gzimg from the TFTP server.
|
|
.Pp
|
|
.Bd -literal
|
|
RedBoot\*[Gt] load -r -b 0x00200000 gzimg_TS7200_flash_0x60660000
|
|
Raw file loaded 0x00200000-0x00605fe0
|
|
.Ed
|
|
.It
|
|
Use the RedBoot
|
|
.Ic fis
|
|
command to copy the image into flash.
|
|
For more information on the RedBoot
|
|
Flash Image System, see the RedBoot documentation. The factory default
|
|
Linux image may already be present in flash and must be deleted before
|
|
continuing.
|
|
.Bd -literal
|
|
RedBoot\*[Gt] fis delete vmlinux
|
|
RedBoot\*[Gt] fis create -b 0x00200000 -f 0x60660000 -l 0x00160000 netbsd.gz
|
|
.Ed
|
|
.enum)
|
|
.Pp
|
|
Once the compressed kernel image has been copied into flash, it may
|
|
be started by jumping to the flash address of the image:
|
|
.Bd -literal
|
|
RedBoot\*[Gt] g 0x60660000
|
|
.Ed
|
|
.
|
|
.Ss2 Preparation for the Intel IQ80310
|
|
The IQ80310 uses RedBoot firmware from Red Hat, Inc.
|
|
RedBoot supports loading the kernel via the serial port and the on-board
|
|
Ethernet.
|
|
These notes assume that the Ethernet will be used to load the kernel.
|
|
RedBoot uses the Trivial File Transfer Protocol
|
|
(TFTP) to load the kernel via the network.
|
|
.Pp
|
|
These notes also assume that the IQ80310 will be run as a diskless
|
|
system; that an NFS server will provide the root file system.
|
|
The
|
|
.Nx
|
|
kernel uses the Dynamic Host Configuration Protocol (DHCP) to
|
|
obtain network address and root file system information.
|
|
.Pp
|
|
The first step is to configure your DHCP, NFS, and TFTP server
|
|
software.
|
|
You will need the MAC address for the on-board Ethernet,
|
|
which RedBoot can provide; see the RedBoot documentation for more
|
|
information.
|
|
.Pp
|
|
The next step is to configure RedBoot to obtain its IP address from
|
|
your DHCP server; see the RedBoot documentation for more information.
|
|
.Pp
|
|
Once your DHCP server and RedBoot are properly configured, you should
|
|
see information similar to the following when the IQ80310 is reset
|
|
or powered-up:
|
|
.Bd -literal
|
|
RedBoot(tm) debug environment - built 17:16:14, Feb 12 2001
|
|
Platform: IQ80310 (XScale)
|
|
Copyright (C) 2000, Red Hat, Inc.
|
|
|
|
RAM: 0xa0000000-0xa2000000
|
|
FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each.
|
|
IP: 192.168.0.10, Default server: 192.168.0.1
|
|
RedBoot\*[Gt]
|
|
.Ed
|
|
.Pp
|
|
A compressed kernel image and loader suitable for placing into
|
|
flash is provided with the distribution.
|
|
Use of this image is optional;
|
|
a kernel that can be directly loaded over the network
|
|
by RedBoot is also provided.
|
|
.Pp
|
|
The image for the IQ80310 can be found under the
|
|
.Nx*M
|
|
\*V distribution directory in
|
|
.Pa \*M/binary/gzimg/gzimg_IQ80310_flash_0x00080000.gz ,
|
|
and corresponds to the kernel in
|
|
.Pa \*M/binary/kernel/netbsd-IQ80310.gz .
|
|
The following steps
|
|
describe how to copy the compressed kernel image into flash.
|
|
.Pp
|
|
.(enum
|
|
Uncompress the gzimg file and place it into the TFTP server's
|
|
download area (note, the kernel inside the gzimg is still
|
|
compressed after this step).
|
|
.Pp
|
|
.Dl server# Ic gzcat gzimg_IQ80310_flash_0x00080000.gz \*[Gt] /tftpboot/gzimg_IQ80310_flash_0x00080000
|
|
.It
|
|
Load the gzimg from the TFTP server.
|
|
.Pp
|
|
.Bd -literal
|
|
RedBoot\*[Gt] load -r -b 0xa0200000 gzimg_IQ80310_flash_0x00080000
|
|
Raw file loaded 0xa0200000-0xa0305fe0
|
|
.Ed
|
|
.It
|
|
Use the RedBoot
|
|
.Ic fis
|
|
command to copy the image into flash.
|
|
For more information on the RedBoot
|
|
Flash Image System, see the RedBoot documentation.
|
|
.Bd -literal
|
|
RedBoot\*[Gt] fis create -b 0xa0200000 -f 0x00080000 -l 0x00200000 netbsd.gz
|
|
.Ns ... Erase from 0x00080000-0x00280000: ....................
|
|
.Ns ... Program from 0xa0200000-0xa0400000 at 0x00080000: ....................
|
|
.Ns ... Unlock from 0x007e0000-0x00800000: .
|
|
.Ns ... Erase from 0x007e0000-0x00800000: .
|
|
.Ns ... Program from 0xa1fd0000-0xa1ff0000 at 0x007e0000: .
|
|
.Ns ... Lock from 0x007e0000-0x00800000: .
|
|
.Ed
|
|
.enum)
|
|
.Pp
|
|
Once the compressed kernel image has been copied into flash, it may
|
|
be started by jumping to the flash address of the image:
|
|
.Bd -literal
|
|
RedBoot\*[Gt] g 0x00080000
|
|
|
|
\*[Gt]\*[Gt] NetBSD/IQ80310 Gzip Boot, Revision 1.1
|
|
\*[Gt]\*[Gt] (root@tgm, Thu Mar 28 18:32:45 PST 2002)
|
|
\*[Gt]\*[Gt] RAM 0xa0000000 - 0xafffffff, heap at 0xaffd0000
|
|
\*[Gt]\*[Gt] Load address: 0xa0200000
|
|
\*[Gt]\*[Gt] Image size: 741244
|
|
Uncompressing image...done.
|
|
Jumping to image @ 0xa0200000...
|
|
|
|
NetBSD/evbarm (IQ80310) booting ...
|
|
Resetting secondary PCI bus...
|
|
initarm: Configuring system ...
|
|
physmemory: 65536 pages at 0xa0000000 -\*[Gt] 0xafffffff
|
|
init subsystems: stacks vectors undefined pmap irq done.
|
|
[ using 155084 bytes of netbsd ELF symbol table ]
|
|
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
|
|
The NetBSD Foundation, Inc. All rights reserved.
|
|
Copyright (c) 1982, 1986, 1989, 1991, 1993
|
|
The Regents of the University of California. All rights reserved.
|
|
|
|
NetBSD 1.5ZC (IQ80310) #20: Fri Mar 29 10:25:53 PST 2002
|
|
root@tgm:/u1/netbsd/src/sys/arch/evbarm/compile/IQ80310
|
|
total memory = 256 MB
|
|
avail memory = 232 MB
|
|
using 1228 buffers containing 13208 KB of memory
|
|
mainbus0 (root)
|
|
cpu0 at mainbus0: i80200 step A-0 (XScale core)
|
|
cpu0: DC enabled IC enabled WB enabled LABT
|
|
cpu0: 32KB/32B 32-way Instruction cache
|
|
cpu0: 32KB/32B 32-way write-back-locking Data cache
|
|
obio0 at mainbus0: board rev. F, CPLD rev. D, backplane present
|
|
com0 at obio0 addr 0xfe810000: ns16550a, working fifo
|
|
com0: console
|
|
com1 at obio0 addr 0xfe800000: ns16550a, working fifo
|
|
iopxs0 at mainbus0: i80312 Companion I/O, acting as PCI host
|
|
iopxs0: configuring Secondary PCI bus
|
|
pci0 at iopxs0 bus 1
|
|
pci0: i/o space, memory space enabled
|
|
ppb0 at pci0 dev 7 function 0: Digital Equipment DECchip 21154 PCI-PCI Bridge (rev. 0x05)
|
|
pci1 at ppb0 bus 2
|
|
pci1: i/o space, memory space enabled
|
|
fxp0 at pci1 dev 0 function 0: i82559S Ethernet, rev 9
|
|
fxp0: interrupting at iq80310 irq 1
|
|
fxp0: Ethernet address 00:80:4d:46:0b:b9
|
|
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
|
|
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
|
|
clock: hz=100 stathz=0 profhz=0
|
|
boot device: \*[Lt]unknown\*[Gt]
|
|
root device:
|
|
.Ed
|
|
.
|
|
.Ss2 Preparation for the Intel IQ80321
|
|
The IQ80321 uses RedBoot firmware from Red Hat, Inc.
|
|
RedBoot supports loading the kernel via the serial port and the on-board
|
|
Ethernet.
|
|
These notes assume that the Ethernet will be used to load the kernel.
|
|
RedBoot uses the Trivial File Transfer Protocol
|
|
(TFTP) to load the kernel via the network.
|
|
.Pp
|
|
These notes also assume that the IQ80321 will be run as a diskless
|
|
system; that an NFS server will provide the root file system.
|
|
The
|
|
.Nx
|
|
kernel uses the Dynamic Host Configuration Protocol (DHCP) to
|
|
obtain network address and root file system information.
|
|
.Pp
|
|
The first step is to configure your DHCP, NFS, and TFTP server
|
|
software.
|
|
You will need the MAC address for the on-board Ethernet,
|
|
which RedBoot can provide; see the RedBoot documentation for more
|
|
information.
|
|
.Pp
|
|
The next step is to configure RedBoot to obtain its IP address from
|
|
your DHCP server; see the RedBoot documentation for more information.
|
|
.Pp
|
|
Once your DHCP server and RedBoot are properly configured, you should
|
|
see information similar to the following when the IQ80321 is reset
|
|
or powered-up:
|
|
.Bd -literal
|
|
Ethernet eth0: MAC address 00:07:e9:03:38:40
|
|
IP: 192.168.0.11, Default server: 192.168.0.1
|
|
|
|
RedBoot(tm) bootstrap and debug environment [ROM]
|
|
Non-certified release, version UNKNOWN - built 11:21:56, Feb 1 2002
|
|
|
|
Platform: IQ80321 (XScale)
|
|
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
|
|
|
|
RAM: 0x00000000-0x08000000, 0x00017008-0x01ddd000 available
|
|
FLASH: 0xf0000000 - 0xf0800000, 64 blocks of 0x00020000 bytes each.
|
|
RedBoot\*[Gt]
|
|
.Ed
|
|
.Pp
|
|
A compressed kernel image and loader suitable for placing into
|
|
flash is provided with the distribution.
|
|
Use of this image is optional;
|
|
a kernel that can be directly loaded over the network
|
|
by RedBoot is also provided.
|
|
.Pp
|
|
The image for the IQ80321 can be found under the
|
|
.Nx*M
|
|
\*V distribution directory in
|
|
.Pa \*M/binary/gzimg/gzimg_IQ80321_flash_0xf0080000.gz ,
|
|
and corresponds to the kernel in
|
|
.Pa \*M/binary/kernel/netbsd-IQ80321.gz .
|
|
The following steps
|
|
describe how to copy the compressed kernel image into flash.
|
|
.Pp
|
|
.(enum
|
|
Uncompress the gzimg file and place it into the TFTP server's
|
|
download area (note, the kernel inside the gzimg is still
|
|
compressed after this step).
|
|
.Pp
|
|
.Dl server# Ic gzcat gzimg_IQ80321_flash_0xf0080000.gz \*[Gt] /tftpboot/gzimg_IQ80321_flash_0xf0080000
|
|
.It
|
|
Load the gzimg from the TFTP server.
|
|
.Pp
|
|
.Bd -literal
|
|
RedBoot\*[Gt] load -r -b 0x00200000 gzimg_IQ80321_flash_0xf0080000
|
|
Raw file loaded 0x00200000-0x00305fe4
|
|
.Ed
|
|
.It
|
|
Use the RedBoot
|
|
.Ic fis
|
|
command to copy the image into flash.
|
|
For more information on the RedBoot
|
|
Flash Image System, see the RedBoot documentation.
|
|
.Bd -literal
|
|
RedBoot\*[Gt] fis create -b 0x00200000 -f 0xf0080000 -l 0x00200000 netbsd.gz
|
|
* CAUTION * about to program 'netbsd.gz'
|
|
at 0xf0080000..0xf027ffff from 0x00200000 - are you sure (y/n)? y
|
|
.Ns ... Erase from 0xf0080000-0xf0280000: .......................
|
|
.Ns ... Program from 0x00200000-0x00400000 at 0xf0080000: ......................
|
|
.Ns ... Unlock from 0xf07e0000-0xf0800000: .
|
|
.Ns ... Erase from 0xf07e0000-0xf0800000: .
|
|
.Ns ... Program from 0x01ddf000-0x01dff000 at 0xf07e0000: .
|
|
.Ns ... Lock from 0xf07e0000-0xf0800000: .
|
|
.Ed
|
|
.enum)
|
|
.Pp
|
|
Once the compressed kernel image has been copied into flash, it may
|
|
be started by jumping to the flash address of the image:
|
|
.Bd -literal
|
|
RedBoot\*[Gt] g 0xf0080000
|
|
|
|
\*[Gt]\*[Gt] NetBSD/IQ80321 Gzip Boot, Revision 1.1
|
|
\*[Gt]\*[Gt] (root@tgm, Thu Mar 28 18:32:45 PST 2002)
|
|
\*[Gt]\*[Gt] RAM 0xa0000000 - 0xa7ffffff, heap at 0xa7fd0000
|
|
\*[Gt]\*[Gt] Load address: 0xa0200000
|
|
\*[Gt]\*[Gt] Image size: 739495
|
|
Uncompressing image...done.
|
|
Jumping to image @ 0xa0200000...
|
|
|
|
NetBSD/evbarm (IQ80321) booting ...
|
|
initarm: Configuring system ...
|
|
physmemory: 32768 pages at 0xa0000000 -\*[Gt] 0xa7ffffff
|
|
init subsystems: stacks vectors undefined pmap irq done.
|
|
[ using 155076 bytes of netbsd ELF symbol table ]
|
|
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
|
|
The NetBSD Foundation, Inc. All rights reserved.
|
|
Copyright (c) 1982, 1986, 1989, 1991, 1993
|
|
The Regents of the University of California. All rights reserved.
|
|
|
|
NetBSD 1.5ZC (IQ80321) #1: Thu Mar 28 18:31:58 PST 2002
|
|
root@tgm:/u1/netbsd/src/sys/arch/evbarm/compile/IQ80321
|
|
total memory = 128 MB
|
|
avail memory = 113 MB
|
|
using 1228 buffers containing 6656 KB of memory
|
|
mainbus0 (root)
|
|
cpu0 at mainbus0: i80321 step A-0 (XScale core)
|
|
cpu0: DC enabled IC enabled WB enabled LABT
|
|
cpu0: 32KB/32B 32-way Instruction cache
|
|
cpu0: 32KB/32B 32-way write-back-locking Data cache
|
|
obio0 at mainbus0
|
|
com0 at obio0 addr 0xfe800000: ns16550a, working fifo
|
|
com0: console
|
|
iopxs0 at mainbus0: i80321 I/O Processor, acting as PCI host
|
|
iopxs0: configuring PCI bus
|
|
pci0 at iopxs0 bus 0
|
|
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
|
|
wm0 at pci0 dev 4 function 0: Intel i82544 1000BASE-T Ethernet, rev. 2
|
|
wm0: interrupting at iop321 irq 27
|
|
wm0: Ethernet address 00:07:e9:03:38:40
|
|
makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
|
|
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
|
|
clock: hz=100 stathz=0 profhz=0
|
|
boot device: \*[Lt]unknown\*[Gt]
|
|
root device:
|
|
.Ed
|