NetBSD/sys/arch/arc/conf/GENERIC

284 lines
9.2 KiB
Plaintext

# $NetBSD: GENERIC,v 1.28 2000/03/22 00:58:18 cgd Exp $
# $OpenBSD: GENERIC,v 1.29 1999/08/29 12:14:03 niklas Exp $
#
# GENERIC -- everything that's currently supported
#
include "arch/arc/conf/std.arc"
#ident "GENERIC-$Revision: 1.28 $"
maxusers 32 # estimated number of users
# Standard system options
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=1024 # 1024 pages is the default
options LKM # loadable kernel modules
# Diagnostic/debugging support options
options DIAGNOSTIC # cheap kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
#options KGDB # remote gdb
#options KGDBRATE=19200 # kernel gdb port rate (default 9600)
#options KGDBDEV="17*256+0" # device for kernel gdb
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
options COMPAT_10 # NetBSD 1.0,
options COMPAT_11 # NetBSD 1.1,
options COMPAT_12 # NetBSD 1.2,
options COMPAT_13 # NetBSD 1.3,
options COMPAT_14 # NetBSD 1.4,
options COMPAT_43 # and 4.3BSD
options COMPAT_386BSD_MBRPART # recognize old partition ID
# mipsel specific
options COMPAT_ULTRIX # Ultrix binary compatibility
options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format
# File systems
file-system FFS # fast filesystem
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system NFS # Network File System client
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcoda (below)
# File system options
options QUOTA # FFS quotas
#options FFS_EI # FFS Endian Independent support
#options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Pull in config fragments for kernel crypto. This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.
#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix
#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix
# Networking options
#options GATEWAY # IP packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI networking
options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
#options TCP_COMPAT_42
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options EISAVERBOSE # verbose EISA device autoconfig messages
#options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options SCSIVERBOSE # human readable SCSI error messages
# Kernel root file system and dump configuration.
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
cpu* at mainbus0
#### Pica bus devices
pica* at mainbus0 # ACER Pica systems local bus.
aclock0 at pica?
pc0 at pica?
opms0 at pica?
com0 at pica?
com1 at pica?
lpt0 at pica?
sn0 at pica?
fdc0 at pica?
fd* at fdc? drive ?
asc0 at pica?
scsibus* at asc?
#### ISA bus devices
isabr* at mainbus0 # ISA Bus bridge (std ISA bus).
isa* at isabr?
#isadma0 at isa?
aclock0 at isa? port 0x70 irq 0
pc0 at isa? port 0x60 irq 1 # generic PC console device
com0 at isa? port 0x3f8 irq 4
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 4
com3 at isa? port 0x2e8 irq 3
ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards
com* at ast? slave ?
# Joystick driver. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
# XXX - should be configured
#wdc0 at isa? port 0x1f0 irq 14 flags 0x00
#wdc1 at isa? port 0x170 irq 15 flags 0x00
#wdc* at isapnp?
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
# XXX - should be configured
#wd* at wdc? channel ? drive ? flags 0x0000
# ATAPI bus support
# XXX - should be configured
#atapibus* at wdc? channel ?
# ATAPI devices
# flags have the same meaning as for IDE drives.
# XXX - should be configured
#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7
# ISA network interfaces
# XXX - should be configured
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
#ep0 at isa? port ? irq ? # 3C509 ethernet cards
#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
#ne1 at isa? port 0x300 irq 10
#ne* at isapnp? # NE[12]000 PnP ethernet
#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
#we1 at isa? port 0x300 iomem 0xcc000 irq 10
#we* at isapnp?
# XXX - should be configured
#btl0 at isa? port 0x330 irq ? drq ?
#scsibus* at btl?
#### Algor bus devices
#algor* at mainbus0 # Algorithmics local bus.
#aclock0 at algor?
#com0 at algor?
#com1 at algor?
#lpt0 at algor?
#### PCI bus devices
#pbcpcibr* at mainbus0 # Algorithmics PCI bus bridge.
#pci* at pbcpcibr?
#pcivga* at pci? dev ? function ?
#ncr* at pci? dev ? function ?
#scsibus* at ncr?
#de* at pci? dev ? function ?
#### SCSI bus devices
sd* at scsibus? target ? lun ?
st* at scsibus? target ? lun ?
cd* at scsibus? target ? lun ?
ch* at scsibus? target ? lun ?
ss* at scsibus? target ? lun ?
uk* at scsibus? target ? lun ?
#### Pseudo devices
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device raid 4 # RAIDframe disk driver
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop 1 # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device sl 2 # Serial Line IP
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device tun 2 # network tunneling over tty
#pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
# miscellaneous pseudo-devices
pseudo-device pty 64 # pseudo-terminals
pseudo-device tb 1 # tablet line discipline
#pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port arc yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
# a pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
# mouse & keyboard multiplexor pseudo-devices
#pseudo-device wsmux 2