Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/netbt/rfcomm.h

427 lines
15 KiB
C
Raw Blame History

/* $NetBSD: rfcomm.h,v 1.9 2009/09/13 18:45:11 pooka Exp $ */
/*-
* Copyright (c) 2006 Itronix Inc.
* All rights reserved.
*
* Written by Iain Hibbert for Itronix Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of Itronix Inc. may not be used to endorse
* or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 2001-2003 Maksim Yevmenkin <m_evmenkin@yahoo.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: rfcomm.h,v 1.9 2009/09/13 18:45:11 pooka Exp $
* $FreeBSD: src/sys/netgraph/bluetooth/include/ng_btsocket_rfcomm.h,v 1.4 2005/01/11 01:39:53 emax Exp $
*/
#ifndef _NETBT_RFCOMM_H_
#define _NETBT_RFCOMM_H_
#include <sys/types.h>
/*************************************************************************
*************************************************************************
** RFCOMM **
*************************************************************************
*************************************************************************/
#define RFCOMM_MTU_MAX 32767
#define RFCOMM_MTU_MIN 23
#define RFCOMM_MTU_DEFAULT 127
#define RFCOMM_CREDITS_MAX 255 /* in any single packet */
#define RFCOMM_CREDITS_DEFAULT 7 /* default initial value */
#define RFCOMM_CHANNEL_ANY 0
#define RFCOMM_CHANNEL_MIN 1
#define RFCOMM_CHANNEL_MAX 30
/* RFCOMM frame types */
#define RFCOMM_FRAME_SABM 0x2f
#define RFCOMM_FRAME_DISC 0x43
#define RFCOMM_FRAME_UA 0x63
#define RFCOMM_FRAME_DM 0x0f
#define RFCOMM_FRAME_UIH 0xef
/* RFCOMM MCC commands */
#define RFCOMM_MCC_TEST 0x08 /* Test */
#define RFCOMM_MCC_FCON 0x28 /* Flow Control on */
#define RFCOMM_MCC_FCOFF 0x18 /* Flow Control off */
#define RFCOMM_MCC_MSC 0x38 /* Modem Status Command */
#define RFCOMM_MCC_RPN 0x24 /* Remote Port Negotiation */
#define RFCOMM_MCC_RLS 0x14 /* Remote Line Status */
#define RFCOMM_MCC_PN 0x20 /* Port Negotiation */
#define RFCOMM_MCC_NSC 0x04 /* Non Supported Command */
/* RFCOMM modem signals */
#define RFCOMM_MSC_FC 0x02 /* Flow Control asserted */
#define RFCOMM_MSC_RTC 0x04 /* Ready To Communicate */
#define RFCOMM_MSC_RTR 0x08 /* Ready To Receive */
#define RFCOMM_MSC_IC 0x40 /* Incomming Call (RING) */
#define RFCOMM_MSC_DV 0x80 /* Data Valid */
/* RPN parameters - baud rate */
#define RFCOMM_RPN_BR_2400 0x0
#define RFCOMM_RPN_BR_4800 0x1
#define RFCOMM_RPN_BR_7200 0x2
#define RFCOMM_RPN_BR_9600 0x3
#define RFCOMM_RPN_BR_19200 0x4
#define RFCOMM_RPN_BR_38400 0x5
#define RFCOMM_RPN_BR_57600 0x6
#define RFCOMM_RPN_BR_115200 0x7
#define RFCOMM_RPN_BR_230400 0x8
/* RPN parameters - data bits */
#define RFCOMM_RPN_DATA_5 0x0
#define RFCOMM_RPN_DATA_6 0x1
#define RFCOMM_RPN_DATA_7 0x2
#define RFCOMM_RPN_DATA_8 0x3
/* RPN parameters - stop bit */
#define RFCOMM_RPN_STOP_1 0
#define RFCOMM_RPN_STOP_15 1
/* RPN parameters - parity enable */
#define RFCOMM_RPN_PARITY_NONE 0x0
/* RPN parameters - parity type */
#define RFCOMM_RPN_PARITY_ODD 0x0
#define RFCOMM_RPN_PARITY_EVEN 0x1
#define RFCOMM_RPN_PARITY_MARK 0x2
#define RFCOMM_RPN_PARITY_SPACE 0x3
/* RPN parameters - default line_setting */
#define RFCOMM_RPN_8_N_1 0x03
/* RPN parameters - flow control */
#define RFCOMM_RPN_XON_CHAR 0x11
#define RFCOMM_RPN_XOFF_CHAR 0x13
#define RFCOMM_RPN_FLOW_NONE 0x00
/* RPN parameters - mask */
#define RFCOMM_RPN_PM_RATE 0x0001
#define RFCOMM_RPN_PM_DATA 0x0002
#define RFCOMM_RPN_PM_STOP 0x0004
#define RFCOMM_RPN_PM_PARITY 0x0008
#define RFCOMM_RPN_PM_PTYPE 0x0010
#define RFCOMM_RPN_PM_XON 0x0020
#define RFCOMM_RPN_PM_XOFF 0x0040
#define RFCOMM_RPN_PM_FLOW 0x3f00
#define RFCOMM_RPN_PM_ALL 0x3f7f
/* RFCOMM command frame header */
struct rfcomm_cmd_hdr
{
uint8_t address;
uint8_t control;
uint8_t length;
uint8_t fcs;
} __packed;
/* RFCOMM MSC command */
struct rfcomm_mcc_msc
{
uint8_t address;
uint8_t modem;
uint8_t brk;
} __packed;
/* RFCOMM RPN command */
struct rfcomm_mcc_rpn
{
uint8_t dlci;
uint8_t bit_rate;
uint8_t line_settings;
uint8_t flow_control;
uint8_t xon_char;
uint8_t xoff_char;
uint16_t param_mask;
} __packed;
/* RFCOMM RLS command */
struct rfcomm_mcc_rls
{
uint8_t address;
uint8_t status;
} __packed;
/* RFCOMM PN command */
struct rfcomm_mcc_pn
{
uint8_t dlci;
uint8_t flow_control;
uint8_t priority;
uint8_t ack_timer;
uint16_t mtu;
uint8_t max_retrans;
uint8_t credits;
} __packed;
/* RFCOMM frame parsing macros */
#define RFCOMM_DLCI(b) (((b) & 0xfc) >> 2)
#define RFCOMM_TYPE(b) (((b) & 0xef))
#define RFCOMM_EA(b) (((b) & 0x01))
#define RFCOMM_CR(b) (((b) & 0x02) >> 1)
#define RFCOMM_PF(b) (((b) & 0x10) >> 4)
#define RFCOMM_CHANNEL(dlci) (((dlci) >> 1) & 0x2f)
#define RFCOMM_DIRECTION(dlci) ((dlci) & 0x1)
#define RFCOMM_MKADDRESS(cr, dlci) \
((((dlci) & 0x3f) << 2) | ((cr) << 1) | 0x01)
#define RFCOMM_MKCONTROL(type, pf) ((((type) & 0xef) | ((pf) << 4)))
#define RFCOMM_MKDLCI(dir, channel) ((((channel) & 0x1f) << 1) | (dir))
/* RFCOMM MCC macros */
#define RFCOMM_MCC_TYPE(b) (((b) & 0xfc) >> 2)
#define RFCOMM_MCC_LENGTH(b) (((b) & 0xfe) >> 1)
#define RFCOMM_MKMCC_TYPE(cr, type) ((((type) << 2) | ((cr) << 1) | 0x01))
/* RPN macros */
#define RFCOMM_RPN_DATA_BITS(line) ((line) & 0x3)
#define RFCOMM_RPN_STOP_BITS(line) (((line) >> 2) & 0x1)
#define RFCOMM_RPN_PARITY(line) (((line) >> 3) & 0x1)
/*************************************************************************
*************************************************************************
** SOCK_STREAM RFCOMM sockets **
*************************************************************************
*************************************************************************/
/* Socket options */
#define SO_RFCOMM_MTU 1 /* mtu */
#define SO_RFCOMM_FC_INFO 2 /* flow control info (below) */
#define SO_RFCOMM_LM 3 /* link mode */
/* Flow control information */
struct rfcomm_fc_info {
uint8_t lmodem; /* modem signals (local) */
uint8_t rmodem; /* modem signals (remote) */
uint8_t tx_cred; /* TX credits */
uint8_t rx_cred; /* RX credits */
uint8_t cfc; /* credit flow control */
uint8_t reserved;
};
/* RFCOMM link mode flags */
#define RFCOMM_LM_AUTH (1<<0) /* want authentication */
#define RFCOMM_LM_ENCRYPT (1<<1) /* want encryption */
#define RFCOMM_LM_SECURE (1<<2) /* want secured link */
#ifdef _KERNEL
/* sysctl variables */
extern int rfcomm_sendspace;
extern int rfcomm_recvspace;
extern int rfcomm_mtu_default;
extern int rfcomm_ack_timeout;
extern int rfcomm_mcc_timeout;
/*
* Bluetooth RFCOMM session data
* One L2CAP connection == one RFCOMM session
*/
/* Credit note */
struct rfcomm_credit {
struct rfcomm_dlc *rc_dlc; /* owner */
uint16_t rc_len; /* length */
SIMPLEQ_ENTRY(rfcomm_credit) rc_next; /* next credit */
};
/* RFCOMM session data (one L2CAP channel) */
struct rfcomm_session {
struct l2cap_channel *rs_l2cap; /* L2CAP pointer */
uint16_t rs_flags; /* session flags */
uint16_t rs_state; /* session state */
uint16_t rs_mtu; /* default MTU */
SIMPLEQ_HEAD(,rfcomm_credit) rs_credits; /* credit notes */
LIST_HEAD(,rfcomm_dlc) rs_dlcs; /* DLC list */
callout_t rs_timeout; /* timeout */
LIST_ENTRY(rfcomm_session) rs_next; /* next session */
};
LIST_HEAD(rfcomm_session_list, rfcomm_session);
extern struct rfcomm_session_list rfcomm_session_active;
extern struct rfcomm_session_list rfcomm_session_listen;
/* Session state */
#define RFCOMM_SESSION_CLOSED 0
#define RFCOMM_SESSION_WAIT_CONNECT 1
#define RFCOMM_SESSION_OPEN 2
#define RFCOMM_SESSION_WAIT_DISCONNECT 3
#define RFCOMM_SESSION_LISTEN 4
/* Session flags */
#define RFCOMM_SESSION_INITIATOR (1 << 0) /* we are initiator */
#define RFCOMM_SESSION_CFC (1 << 1) /* credit flow control */
#define RFCOMM_SESSION_LFC (1 << 2) /* local flow control */
#define RFCOMM_SESSION_RFC (1 << 3) /* remote flow control */
#define RFCOMM_SESSION_FREE (1 << 4) /* self lock out for free */
#define IS_INITIATOR(rs) ((rs)->rs_flags & RFCOMM_SESSION_INITIATOR)
/* Bluetooth RFCOMM DLC data (connection) */
struct rfcomm_dlc {
struct rfcomm_session *rd_session; /* RFCOMM session */
uint8_t rd_dlci; /* RFCOMM DLCI */
uint16_t rd_flags; /* DLC flags */
uint16_t rd_state; /* DLC state */
uint16_t rd_mtu; /* MTU */
int rd_mode; /* link mode */
struct sockaddr_bt rd_laddr; /* local address */
struct sockaddr_bt rd_raddr; /* remote address */
uint8_t rd_lmodem; /* local modem signls */
uint8_t rd_rmodem; /* remote modem signals */
int rd_rxcred; /* receive credits (sent) */
size_t rd_rxsize; /* receive buffer (bytes, avail) */
int rd_txcred; /* transmit credits (unused) */
int rd_pending; /* packets sent but not complete */
callout_t rd_timeout; /* timeout */
struct mbuf *rd_txbuf; /* transmit buffer */
const struct btproto *rd_proto; /* upper layer callbacks */
void *rd_upper; /* upper layer argument */
LIST_ENTRY(rfcomm_dlc) rd_next; /* next dlc on session */
};
/*
* Credit Flow Control works in the following way.
*
* txcred is how many packets we can send. Received credit
* is added to this value, and it is decremented each time
* we send a packet.
*
* rxsize is the number of bytes that are available in the
* upstream receive buffer.
*
* rxcred is the number of credits that we have previously
* sent that are still unused. This value will be decreased
* for each packet we receive and we will add to it when we
* send credits. We calculate the amount of credits to send
* by the cunning formula "(space / mtu) - sent" so that if
* we get a bunch of small packets, we can continue sending
* credits without risking buffer overflow.
*/
/* DLC flags */
#define RFCOMM_DLC_DETACH (1 << 0) /* DLC to be detached */
#define RFCOMM_DLC_SHUTDOWN (1 << 1) /* DLC to be shutdown */
/* DLC state */
#define RFCOMM_DLC_CLOSED 0 /* no session */
#define RFCOMM_DLC_WAIT_SESSION 1 /* waiting for session */
#define RFCOMM_DLC_WAIT_CONNECT 2 /* waiting for connect */
#define RFCOMM_DLC_WAIT_SEND_SABM 3 /* waiting to send SABM */
#define RFCOMM_DLC_WAIT_SEND_UA 4 /* waiting to send UA */
#define RFCOMM_DLC_WAIT_RECV_UA 5 /* waiting to receive UA */
#define RFCOMM_DLC_OPEN 6 /* can send/receive */
#define RFCOMM_DLC_WAIT_DISCONNECT 7 /* waiting for disconnect */
#define RFCOMM_DLC_LISTEN 8 /* listening DLC */
/*
* Bluetooth RFCOMM socket kernel prototypes
*/
struct socket;
struct sockopt;
/* rfcomm_dlc.c */
struct rfcomm_dlc *rfcomm_dlc_lookup(struct rfcomm_session *, int);
struct rfcomm_dlc *rfcomm_dlc_newconn(struct rfcomm_session *, int);
void rfcomm_dlc_close(struct rfcomm_dlc *, int);
void rfcomm_dlc_timeout(void *);
int rfcomm_dlc_setmode(struct rfcomm_dlc *);
int rfcomm_dlc_connect(struct rfcomm_dlc *);
int rfcomm_dlc_open(struct rfcomm_dlc *);
void rfcomm_dlc_start(struct rfcomm_dlc *);
/* rfcomm_session.c */
struct rfcomm_session *rfcomm_session_alloc(struct rfcomm_session_list *, struct sockaddr_bt *);
struct rfcomm_session *rfcomm_session_lookup(struct sockaddr_bt *, struct sockaddr_bt *);
void rfcomm_session_free(struct rfcomm_session *);
int rfcomm_session_send_frame(struct rfcomm_session *, int, int);
int rfcomm_session_send_uih(struct rfcomm_session *, struct rfcomm_dlc *, int, struct mbuf *);
int rfcomm_session_send_mcc(struct rfcomm_session *, int, uint8_t, void *, int);
void rfcomm_init(void);
/* rfcomm_socket.c */
int rfcomm_usrreq(struct socket *, int, struct mbuf *, struct mbuf *, struct mbuf *, struct lwp *);
int rfcomm_ctloutput(int, struct socket *, struct sockopt *);
/* rfcomm_upper.c */
int rfcomm_attach(struct rfcomm_dlc **, const struct btproto *, void *);
int rfcomm_bind(struct rfcomm_dlc *, struct sockaddr_bt *);
int rfcomm_sockaddr(struct rfcomm_dlc *, struct sockaddr_bt *);
int rfcomm_connect(struct rfcomm_dlc *, struct sockaddr_bt *);
int rfcomm_peeraddr(struct rfcomm_dlc *, struct sockaddr_bt *);
int rfcomm_disconnect(struct rfcomm_dlc *, int);
int rfcomm_detach(struct rfcomm_dlc **);
int rfcomm_listen(struct rfcomm_dlc *);
int rfcomm_send(struct rfcomm_dlc *, struct mbuf *);
int rfcomm_rcvd(struct rfcomm_dlc *, size_t);
int rfcomm_setopt(struct rfcomm_dlc *, const struct sockopt *);
int rfcomm_getopt(struct rfcomm_dlc *, struct sockopt *);
#endif /* _KERNEL */
#endif /* _NETBT_RFCOMM_H_ */
Reference in New Issue View Git Blame Copy Permalink