494 lines
14 KiB
C
494 lines
14 KiB
C
/* $NetBSD: refclock_heath.c,v 1.2 1998/01/09 06:06:57 perry Exp $ */
|
|
|
|
/*
|
|
* refclock_heath - clock driver for Heath GC-1000 Most Accurate Clock
|
|
*/
|
|
#ifdef HAVE_CONFIG_H
|
|
#include <config.h>
|
|
#endif
|
|
|
|
#if defined(REFCLOCK) && defined(HEATH)
|
|
|
|
#include <stdio.h>
|
|
#include <ctype.h>
|
|
#ifdef TIME_WITH_SYS_TIME
|
|
# include <sys/time.h>
|
|
# include <time.h>
|
|
#else
|
|
# ifdef TM_IN_SYS_TIME
|
|
# include <sys/time.h>
|
|
# else
|
|
# include <time.h>
|
|
# endif
|
|
#endif
|
|
#ifdef HAVE_SYS_IOCTL_H
|
|
# include <sys/ioctl.h>
|
|
#endif /* not HAVE_SYS_IOCTL_H */
|
|
|
|
#include "ntpd.h"
|
|
#include "ntp_io.h"
|
|
#include "ntp_refclock.h"
|
|
#include "ntp_stdlib.h"
|
|
|
|
/*
|
|
* This driver supports the Heath GC-1000 Most Accurate Clock, with
|
|
* RS232C Output Accessory. This is a WWV/WWVH receiver somewhat less
|
|
* robust than other supported receivers. Its claimed accuracy is 100 ms
|
|
* when actually synchronized to the broadcast signal, but this doesn't
|
|
* happen even most of the time, due to propagation conditions, ambient
|
|
* noise sources, etc. When not synchronized, the accuracy is at the
|
|
* whim of the internal clock oscillator, which can wander into the
|
|
* sunset without warning. Since the indicated precision is 100 ms,
|
|
* expect a host synchronized only to this thing to wander to and fro,
|
|
* occasionally being rudely stepped when the offset exceeds the default
|
|
* CLOCK_MAX of 128 ms.
|
|
*
|
|
* The internal DIPswitches should be set to operate at 1200 baud in
|
|
* MANUAL mode and the current year. The external DIPswitches should be
|
|
* set to GMT and 24-hour format, or to the host local time zone (with
|
|
* DST) and 12-hour format. It is very important that the year be
|
|
* set correctly in the DIPswitches. Otherwise, the day of year will be
|
|
* incorrect after 28 April[?] of a normal or leap year. In 12-hour mode
|
|
* with DST selected the clock will be incorrect by an hour for an
|
|
* indeterminate amount of time between 0000Z and 0200 on the day DST
|
|
* changes.
|
|
*
|
|
* In MANUAL mode the clock responds to a rising edge of the request to
|
|
* send (RTS) modem control line by sending the timecode. Therefore, it
|
|
* is necessary that the operating system implement the TIOCMBIC and
|
|
* TIOCMBIS ioctl system calls and TIOCM_RTS control bit. Present
|
|
* restrictions require the use of a POSIX-compatible programming
|
|
* interface, although other interfaces may work as well.
|
|
*
|
|
* A simple hardware modification to the clock can be made which
|
|
* prevents the clock hearing the request to send (RTS) if the HI SPEC
|
|
* lamp is out. Route the HISPEC signal to the tone decoder board pin
|
|
* 19, from the display, pin 19. Isolate pin 19 of the decoder board
|
|
* first, but maintain connection with pin 10. Also isolate pin 38 of
|
|
* the CPU on the tone board, and use half an added 7400 to gate the
|
|
* original signal to pin 38 with that from pin 19.
|
|
*
|
|
* The clock message consists of 23 ASCII printing characters in the
|
|
* following format:
|
|
*
|
|
* hh:mm:ss.f AM dd/mm/yr<cr>
|
|
*
|
|
* hh:mm:ss.f = hours, minutes, seconds
|
|
* f = deciseconds ('?' when out of spec)
|
|
* AM/PM/bb = blank in 24-hour mode
|
|
* dd/mm/yr = day, month, year
|
|
*
|
|
* The alarm condition is indicated by '?', rather than a digit, at f.
|
|
* Note that 0?:??:??.? is displayed before synchronization is first
|
|
* established and hh:mm:ss.? once synchronization is established and
|
|
* then lost again for about a day.
|
|
*
|
|
* Fudge Factors
|
|
*
|
|
* A fudge time1 value of .04 s appears to center the clock offset
|
|
* residuals. The fudge time2 parameter is the local time offset east of
|
|
* Greenwich, which depends on DST. Sorry about that, but the clock
|
|
* gives no hint on what the DIPswitches say.
|
|
*/
|
|
|
|
/*
|
|
* Interface definitions
|
|
*/
|
|
#define DEVICE "/dev/heath%d" /* device name and unit */
|
|
#define SPEED232 B1200 /* uart speed (1200 baud) */
|
|
#define PRECISION (-4) /* precision assumed (about 100 ms) */
|
|
#define REFID "WWV\0" /* reference ID */
|
|
#define DESCRIPTION "Heath GC-1000 Most Accurate Clock" /* WRU */
|
|
|
|
#define NSAMPLES 3 /* stages of median filter */
|
|
#define LENHEATH 23 /* min timecode length */
|
|
|
|
/*
|
|
* Imported from ntp_timer module
|
|
*/
|
|
extern u_long current_time; /* current time (s) */
|
|
|
|
/*
|
|
* Imported from ntpd module
|
|
*/
|
|
extern int debug; /* global debug flag */
|
|
|
|
/*
|
|
* Tables to compute the ddd of year form icky dd/mm timecode. Viva la
|
|
* leap.
|
|
*/
|
|
static int day1tab[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
|
|
static int day2tab[] = {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
|
|
|
|
/*
|
|
* Unit control structure
|
|
*/
|
|
struct heathunit {
|
|
int pollcnt; /* poll message counter */
|
|
l_fp tstamp; /* timestamp of last poll */
|
|
};
|
|
|
|
/*
|
|
* Function prototypes
|
|
*/
|
|
static int heath_start P((int, struct peer *));
|
|
static void heath_shutdown P((int, struct peer *));
|
|
static void heath_receive P((struct recvbuf *));
|
|
static void heath_poll P((int, struct peer *));
|
|
|
|
/*
|
|
* Transfer vector
|
|
*/
|
|
struct refclock refclock_heath = {
|
|
heath_start, /* start up driver */
|
|
heath_shutdown, /* shut down driver */
|
|
heath_poll, /* transmit poll message */
|
|
noentry, /* not used (old heath_control) */
|
|
noentry, /* initialize driver */
|
|
noentry, /* not used (old heath_buginfo) */
|
|
NOFLAGS /* not used */
|
|
};
|
|
|
|
/*
|
|
* Gee, Unix so thoughfully omitted code to convert from a struct tm to
|
|
* a long, so I'll just have to ferret out the inverse myself, the hard way.
|
|
* (Newton's method.)
|
|
*/
|
|
#define timelocal(x) invert(x, localtime)
|
|
/*
|
|
* comparetm compares two tm structures and returns -1 if the first
|
|
* is less than the second, 0 if they are equal, and +1 if the first
|
|
* is greater than the second. Only the year, month, day, hour, minute
|
|
* and second are compared. The yearday (Julian), day of week, and isdst
|
|
* are not compared.
|
|
*/
|
|
|
|
static int
|
|
comparetm(a, b)
|
|
struct tm *a, *b;
|
|
{
|
|
if (a->tm_year < b->tm_year ) return -1;
|
|
if (a->tm_year > b->tm_year ) return 1;
|
|
if (a->tm_mon < b->tm_mon ) return -1;
|
|
if (a->tm_mon > b->tm_mon ) return 1;
|
|
if (a->tm_mday < b->tm_mday ) return -1;
|
|
if (a->tm_mday > b->tm_mday ) return 1;
|
|
if (a->tm_hour < b->tm_hour ) return -1;
|
|
if (a->tm_hour > b->tm_hour ) return 1;
|
|
if (a->tm_min < b->tm_min ) return -1;
|
|
if (a->tm_min > b->tm_min ) return 1;
|
|
if (a->tm_sec < b->tm_sec ) return -1;
|
|
if (a->tm_sec > b->tm_sec ) return 1;
|
|
return 0;
|
|
}
|
|
|
|
static long
|
|
invert(x, func)
|
|
struct tm *x;
|
|
struct tm *(*func)();
|
|
{
|
|
struct tm *y;
|
|
int result;
|
|
long trial;
|
|
long lower=0L;
|
|
long upper=(long)((unsigned long)(~lower) >> 1);
|
|
|
|
do {
|
|
trial = (upper + lower) / 2L;
|
|
y = (*func)(&trial);
|
|
result = comparetm(x, y);
|
|
if (result < 0) upper = trial;
|
|
if (result > 0) lower = trial;
|
|
} while (result != 0);
|
|
return trial;
|
|
}
|
|
|
|
|
|
/*
|
|
* heath_start - open the devices and initialize data for processing
|
|
*/
|
|
static int
|
|
heath_start(unit, peer)
|
|
int unit;
|
|
struct peer *peer;
|
|
{
|
|
register struct heathunit *up;
|
|
struct refclockproc *pp;
|
|
int fd;
|
|
char device[20];
|
|
|
|
/*
|
|
* Open serial port
|
|
*/
|
|
(void)sprintf(device, DEVICE, unit);
|
|
if (!(fd = refclock_open(device, SPEED232, 0)))
|
|
return (0);
|
|
|
|
/*
|
|
* Allocate and initialize unit structure
|
|
*/
|
|
if (!(up = (struct heathunit *)
|
|
emalloc(sizeof(struct heathunit)))) {
|
|
(void) close(fd);
|
|
return (0);
|
|
}
|
|
memset((char *)up, 0, sizeof(struct heathunit));
|
|
pp = peer->procptr;
|
|
pp->io.clock_recv = heath_receive;
|
|
pp->io.srcclock = (caddr_t)peer;
|
|
pp->io.datalen = 0;
|
|
pp->io.fd = fd;
|
|
if (!io_addclock(&pp->io)) {
|
|
(void) close(fd);
|
|
free(up);
|
|
return (0);
|
|
}
|
|
pp->unitptr = (caddr_t)up;
|
|
|
|
/*
|
|
* Initialize miscellaneous variables
|
|
*/
|
|
peer->precision = PRECISION;
|
|
pp->clockdesc = DESCRIPTION;
|
|
memcpy((char *)&pp->refid, REFID, 4);
|
|
up->pollcnt = 2;
|
|
return (1);
|
|
}
|
|
|
|
|
|
/*
|
|
* heath_shutdown - shut down the clock
|
|
*/
|
|
static void
|
|
heath_shutdown(unit, peer)
|
|
int unit;
|
|
struct peer *peer;
|
|
{
|
|
register struct heathunit *up;
|
|
struct refclockproc *pp;
|
|
|
|
pp = peer->procptr;
|
|
up = (struct heathunit *)pp->unitptr;
|
|
io_closeclock(&pp->io);
|
|
free(up);
|
|
}
|
|
|
|
|
|
/*
|
|
* heath_receive - receive data from the serial interface
|
|
*/
|
|
static void
|
|
heath_receive(rbufp)
|
|
struct recvbuf *rbufp;
|
|
{
|
|
register struct heathunit *up;
|
|
struct refclockproc *pp;
|
|
struct peer *peer;
|
|
l_fp trtmp;
|
|
int month, day;
|
|
int i;
|
|
char dsec, a[5];
|
|
|
|
/*
|
|
* Initialize pointers and read the timecode and timestamp
|
|
*/
|
|
peer = (struct peer *)rbufp->recv_srcclock;
|
|
pp = peer->procptr;
|
|
up = (struct heathunit *)pp->unitptr;
|
|
pp->lencode = refclock_gtlin(rbufp, pp->lastcode, BMAX, &trtmp);
|
|
|
|
/*
|
|
* We get a buffer and timestamp for each <cr>; however, we use
|
|
* the timestamp captured at the RTS modem control line toggle
|
|
* on the assumption that's what the radio bases the timecode
|
|
* on. Apparently, the radio takes about a second to make up its
|
|
* mind to send a timecode, so the receive timestamp is
|
|
* worthless.
|
|
*/
|
|
pp->lastrec = up->tstamp;
|
|
up->pollcnt = 2;
|
|
record_clock_stats(&peer->srcadr, pp->lastcode);
|
|
#ifdef DEBUG
|
|
if (debug)
|
|
printf("heath: timecode %d %s\n", pp->lencode,
|
|
pp->lastcode);
|
|
#endif
|
|
|
|
/*
|
|
* We get down to business, check the timecode format and decode
|
|
* its contents. If the timecode has invalid length or is not in
|
|
* proper format, we declare bad format and exit.
|
|
*/
|
|
if (pp->lencode < LENHEATH) {
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Timecode format: "hh:mm:ss.f AM mm/dd/yy"
|
|
*/
|
|
if (sscanf(pp->lastcode, "%2d:%2d:%2d.%c%5c%2d/%2d/%2d",
|
|
&pp->hour, &pp->minute, &pp->second, &dsec, a, &month, &day,
|
|
&pp->year) != 8) {
|
|
refclock_report(peer, CEVNT_BADREPLY);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If AM or PM is received, assume the clock is displaying local
|
|
* time. First, convert to 24-hour format.
|
|
*/
|
|
|
|
switch (a[1]) {
|
|
case 'P':
|
|
if (12 > pp->hour)
|
|
pp->hour += 12;
|
|
break;
|
|
|
|
case 'A':
|
|
if (12 == pp->hour)
|
|
pp->hour -= 12;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Now make a struct tm out of it, convert to UTC, and
|
|
* repopulate pp->
|
|
*/
|
|
|
|
if (' ' != a[1]) {
|
|
struct tm t, *q;
|
|
time_t l;
|
|
t.tm_sec = pp->second;
|
|
t.tm_min = pp->minute;
|
|
t.tm_hour = pp->hour;
|
|
t.tm_mday = day; /* not converted to yday yet */
|
|
t.tm_mon = month-1; /* ditto */
|
|
t.tm_year = pp->year;
|
|
|
|
t.tm_wday = -1; /* who knows? */
|
|
t.tm_yday = -1; /* who knows? */
|
|
t.tm_isdst = 0; /* who knows? */
|
|
|
|
l = timelocal(&t);
|
|
q = gmtime(&l);
|
|
|
|
pp->year = q->tm_year;
|
|
month = q->tm_mon+1;
|
|
day = q->tm_mday; /* still not converted */
|
|
pp->hour = q->tm_hour;
|
|
/* pp->minute = q->tm_min; GC-1000 cannot adjust timezone */
|
|
/* pp->second = q->tm_sec; by other than hour increments */
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* We determine the day of the year from the DIPswitches. This
|
|
* should be fixed, since somebody might forget to set them.
|
|
* Someday this hazard will be fixed by a fiendish scheme that
|
|
* looks at the timecode and year the radio shows, then computes
|
|
* the residue of the seconds mod the seconds in a leap cycle.
|
|
* If in the third year of that cycle and the third and later
|
|
* months of that year, add one to the day. Then, correct the
|
|
* timecode accordingly. Icky pooh. This bit of nonsense could
|
|
* be avoided if the engineers had been required to write a
|
|
* device driver before finalizing the timecode format.
|
|
*
|
|
* Yes, I know this code incorrectly thinks that 2000 is a leap
|
|
* year; but, the latest year that can be set by the DIPswitches
|
|
* is 1997 anyay. Life is short.
|
|
*/
|
|
if (month < 1 || month > 12 || day < 1) {
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
return;
|
|
}
|
|
if (pp->year % 4) {
|
|
if (day > day1tab[month - 1]) {
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
return;
|
|
}
|
|
for (i = 0; i < month - 1; i++)
|
|
day += day1tab[i];
|
|
} else {
|
|
if (day > day2tab[month - 1]) {
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
return;
|
|
}
|
|
for (i = 0; i < month - 1; i++)
|
|
day += day2tab[i];
|
|
}
|
|
pp->day = day;
|
|
|
|
/*
|
|
* Determine synchronization and last update
|
|
*/
|
|
if (!isdigit(dsec)) {
|
|
pp->leap = LEAP_NOTINSYNC;
|
|
} else {
|
|
pp->leap = 0;
|
|
pp->lasttime = current_time;
|
|
pp->msec = (dsec - '0') * 100;
|
|
}
|
|
|
|
/*
|
|
* Process the new sample in the median filter and determine the
|
|
* reference clock offset and dispersion. We use lastrec as both
|
|
* the reference time and receive time, in order to avoid being
|
|
* cute, like setting the reference time later than the receive
|
|
* time, which may cause a paranoid protocol module to chuck out
|
|
* the data.
|
|
*/
|
|
if (!refclock_process(pp, NSAMPLES, NSAMPLES)) {
|
|
refclock_report(peer, CEVNT_BADTIME);
|
|
return;
|
|
}
|
|
refclock_receive(peer, &pp->offset, 0, pp->dispersion,
|
|
&pp->lastrec, &pp->lastrec, pp->leap);
|
|
}
|
|
|
|
|
|
/*
|
|
* heath_poll - called by the transmit procedure
|
|
*/
|
|
static void
|
|
heath_poll(unit, peer)
|
|
int unit;
|
|
struct peer *peer;
|
|
{
|
|
register struct heathunit *up;
|
|
struct refclockproc *pp;
|
|
int bits = TIOCM_RTS;
|
|
|
|
/*
|
|
* At each poll we check for timeout and toggle the RTS modem
|
|
* control line, then take a timestamp. Presumably, this is the
|
|
* event the radio captures to generate the timecode.
|
|
*/
|
|
pp = peer->procptr;
|
|
up = (struct heathunit *)pp->unitptr;
|
|
if (up->pollcnt == 0)
|
|
refclock_report(peer, CEVNT_TIMEOUT);
|
|
else
|
|
up->pollcnt--;
|
|
pp->polls++;
|
|
|
|
/*
|
|
* We toggle the RTS modem control lead to kick a timecode loose
|
|
* from the radio. This code works only for POSIX and SYSV
|
|
* interfaces. With bsd you are on your own. We take a timestamp
|
|
* between the up and down edges to lengthen the pulse, which
|
|
* should be about 50 usec on a Sun IPC. With hotshot CPUs, the
|
|
* pulse might get too short. Later.
|
|
*/
|
|
if (ioctl(pp->io.fd, TIOCMBIC, (char *)&bits) < 0)
|
|
refclock_report(peer, CEVNT_FAULT);
|
|
get_systime(&up->tstamp);
|
|
ioctl(pp->io.fd, TIOCMBIS, (char *)&bits);
|
|
|
|
}
|
|
|
|
#else /* not (REFCLOCK && HEATH) */
|
|
int refclock_health_bs;
|
|
#endif /* not (REFCLOCK && HEATH) */
|