NetBSD/distrib/notes/vax/hardware

41 lines
1.5 KiB
Plaintext

.\" $NetBSD: hardware,v 1.3 1999/01/13 07:30:09 ross Exp $
.
Hardware supported by NetBSD/vax \*V includes (but may not be limited to):
.Bl -tag -width indent -offset indent
.It Em CPU types:
VAX 11/750, VAX 11/78{0,5}, VAX 8200/8250/8300/8350,
VAX 8600/8650, MicroVAX II, MicroVAX III,
MicroVAX 3600/3800/3900, MicroVAX 3300/3400/3500,
MicroVAX 2000/VAXstation 2000 and some VAXstation 3100.
.It Em Networking:
DEUNA/DELUA Unibus ethernet, DEQNA/DELQA Q22 bus ethernet,
and LANCE chip where available.
.It Em Serial lines:
DHU11/DHV11/DL11/DLV11/DZ11/DZQ11/DZV11 Unibus/Q22 bus
asynchronous lines and DZ11-compatible lines on VAXstations.
.It Em Disks:
UDA50 Unibus MSCP controller, KDA50/RQDX1/2/3 Q22 bus
MSCP controller, KDB50 BI-bus MSCP controller, MFM and
SCSI controllers on VAXstations, RP04/05/06/07 and
RM02/03/05/80 Massbus disks, and Console RL02 on
VAX 8600.
.Pp
Some third-party controllers are also known to work, other do not.
.It Em Tapes:
TMSCP on Q22 bus (TK50/70), SCSI tapes on VAXstations.
.El
.Pp
The minimal configuration requires 2M of RAM and ~40MB of disk space,
but the installation requires at least 4MB RAM and you probably do
not want to run with anything less than that.
.Pp
Here is a table of recommended HD partition sizes for a full install:
.Pp
.Bl -column -offset indent Partition Advised Needed
.It Partition Ta Advised Ta Needed
.It root\ (/) Ta 20M Ta 10M
.It user\ (/usr) Ta 80M Ta 45M
.It swap Ta 2\ or\ 3\ *\ RAM
.El
Anything else is up to you!