NetBSD/sys/arch/pmax/dev/pxreg.h

370 lines
12 KiB
C

/* $NetBSD: pxreg.h,v 1.7 2000/01/14 02:00:46 ad Exp $ */
/*-
* Copyright (c) 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Andy Doran.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _PMAX_DEV_PXREG_H_
#define _PMAX_DEV_PXREG_H_
/*
* Definitions for the PixelStamp on Digital's 2D and 3D TurboChannel
* graphics accelerators. Stamp command packets take this general format:
*
* command word
*
* per-packet context (optional):
* line width
* xy mask
* cliping rectangle min & max
* rgb constant
* z constant
*
* per-primitive context (optional):
* xy mask
* xy mask address
* primitive data (vertices, spans info, video)
* line width
* halfspace equals conditions
* rgb flat, or rgb{1,2,3} smooth
* z flat, or z{1,2,3} smooth
*/
/*
* These definitions are for the stamp command word, the first in
* each packet. This is a 32-bit word on all architectures.
*/
/* opcode type */
#define STAMP_CMD_POINTS (0x0000)
#define STAMP_CMD_LINES (0x0001)
#define STAMP_CMD_TRIANGLES (0x0002)
#define STAMP_CMD_COPYSPANS (0x0005)
#define STAMP_CMD_READSPANS (0x0006)
#define STAMP_CMD_WRITESPANS (0x0007)
#define STAMP_CMD_VIDEO (0x0008)
/* RGB format */
#define STAMP_RGB_NONE (0x0000)
#define STAMP_RGB_CONST (0x0010)
#define STAMP_RGB_FLAT (0x0020)
#define STAMP_RGB_SMOOTH (0x0030)
/* Z format */
#define STAMP_Z_NONE (0x0000)
#define STAMP_Z_CONST (0x0040)
#define STAMP_Z_FLAT (0x0080)
#define STAMP_Z_SMOOTH (0x00c0)
/* XY mask format */
#define STAMP_XY_NONE (0x0000)
#define STAMP_XY_PERPACKET (0x0100)
#define STAMP_XY_PERPRIMATIVE (0x0200)
/* line width format */
#define STAMP_LW_NONE (0x0000)
#define STAMP_LW_PERPACKET (0x0400)
#define STAMP_LW_PERPRIMATIVE (0x0800)
/* misc. */
#define STAMP_CLIPRECT (0x00080000)
#define STAMP_MESH (0x00200000)
#define STAMP_AALINE (0x00800000)
#define STAMP_HS_EQUALS (0x80000000)
/*
* These definitions are for the stamp update word, also part of
* each packet.
*/
/* plane */
#define STAMP_PLANE_8X3 (0 << 5)
#define STAMP_PLANE_24 (1 << 5)
/* when to write enable the stamp */
#define STAMP_WE_SIGN (0x04 << 8)
#define STAMP_WE_XYMASK (0x02 << 8)
#define STAMP_WE_CLIPRECT (0x01 << 8)
#define STAMP_WE_NONE (0x00 << 8)
/* update method */
#define STAMP_METHOD_CLEAR (0x60 << 12)
#define STAMP_METHOD_AND (0x14 << 12)
#define STAMP_METHOD_ANDREV (0x15 << 12)
#define STAMP_METHOD_COPY (0x20 << 12)
#define STAMP_METHOD_ANDINV (0x16 << 12)
#define STAMP_METHOD_NOOP (0x40 << 12)
#define STAMP_METHOD_XOR (0x11 << 12)
#define STAMP_METHOD_OR (0x0f << 12)
#define STAMP_METHOD_NOR (0x17 << 12)
#define STAMP_METHOD_EQUIV (0x10 << 12)
#define STAMP_METHOD_INV (0x4e << 12)
#define STAMP_METHOD_ORREV (0x0e << 12)
#define STAMP_METHOD_COPYINV (0x2d << 12)
#define STAMP_METHOD_ORINV (0x0d << 12)
#define STAMP_METHOD_NAND (0x0c << 12)
#define STAMP_METHOD_SET (0x6c << 12)
#define STAMP_METHOD_SUM (0x00 << 12)
#define STAMP_METHOD_DIFF (0x02 << 12)
#define STAMP_METHOD_REVDIFF (0x01 << 12)
/* double buffering */
#define STAMP_DB_NONE (0x00 << 28)
#define STAMP_DB_01 (0x01 << 28)
#define STAMP_DB_12 (0x02 << 28)
#define STAMP_DB_02 (0x04 << 28)
/* misc */
#define STAMP_UPDATE_ENABLE (1)
#define STAMP_SAVE_SIGN (1<<6)
#define STAMP_SAVE_ALPHA (1<<7)
#define STAMP_SUPERSAMPLE (1<<11)
#define STAMP_SPAN (1<<19)
#define STAMP_COPYSPAN_ALIGNED (1<<20)
#define STAMP_MINMAX (1<<21)
#define STAMP_MULT (1<<22)
#define STAMP_MULTACC (1<<23)
#define STAMP_HALF_BUFF (1<27)
#define STAMP_INITIALIZE (1<<31)
#ifdef _KERNEL
#define STAMP_WIDTH (pxi->pxi_stampw)
#define STAMP_HEIGHT (pxi->pxi_stamph)
#endif
#define XMASKADDR(__sx, __a) (((__a)-((__sx) % STAMP_WIDTH)) & 0xF)
#define YMASKADDR(__sy, __b) (((__b)-((__sy) % STAMP_HEIGHT)) & 0xF)
#define XYMASKADDR(_x,_y,_a,_b) (XMASKADDR(_x,_a) << 16 | YMASKADDR(_y,_b))
/*
* For the poll register. Don't mess with the # of retries or the delay
* unless you know what you're doing. According to OSF header files,
* the delay on Alpha is 20us, and the # of retries should be 4000. This is
* inadequate, particularly on the PXG which seems to run at a higher
* frequency. The STIC gets wedged while scrolling quite a lot.
*/
#define STAMP_OK (0)
#define STAMP_BUSY (1)
#define STAMP_RETRIES (7000)
#define STAMP_DELAY (20)
#ifdef alpha
#define __PXS(n) ((n) << 1)
#else
#define __PXS(n) (n)
#endif
/*
* Hardware offsets within PX board's TC slot.
*/
#define PX_STIC_POLL_OFFSET __PXS(0x000000) /* STIC DMA poll space */
#define PX_STAMP_OFFSET __PXS(0x0c0000) /* pixelstamp space on STIC */
#define PX_STIC_OFFSET __PXS(0x180000) /* STIC registers */
#define PX_VDAC_OFFSET __PXS(0x200000) /* VDAC registers (bt459) */
#define PX_VDAC_RESET_OFFSET __PXS(0x300000) /* VDAC reset register */
#define PX_ROM_OFFSET __PXS(0x300000) /* ROM code */
/*
* Hardware offsets within PXG board's TC slot.
*/
#define PXG_STIC_POLL_OFFSET __PXS(0x000000) /* STIC DMA poll space */
#define PXG_STAMP_OFFSET __PXS(0x0c0000) /* pixelstamp space on STIC */
#define PXG_STIC_OFFSET __PXS(0x180000) /* STIC registers */
#define PXG_SRAM_OFFSET __PXS(0x200000) /* N10 SRAM */
#define PXG_HOST_INTR_OFFSET __PXS(0x280000) /* N10 host interrupt */
#define PXG_COPROC_INTR_OFFSET __PXS(0x2c0000) /* N10 coprocessor interrupt */
#define PXG_VDAC_OFFSET __PXS(0x300000) /* VDAC registers (bt459) */
#define PXG_VDAC_RESET_OFFSET __PXS(0x340000) /* VDAC reset register */
#define PXG_ROM_OFFSET __PXS(0x380000) /* ROM code */
#define PXG_N10_START_OFFSET __PXS(0x380000) /* N10 start register */
#define PXG_N10_RESET_OFFSET __PXS(0x3c0000) /* N10 reset (stop?) register */
/*
* STIC registers
*/
struct stic_regs {
#ifdef __alpha
volatile int32_t __pad0;
volatile int32_t __pad1;
volatile int32_t __pad2;
volatile int32_t __pad3;
volatile int32_t hsync;
volatile int32_t __pad4;
volatile int32_t hsync2;
volatile int32_t __pad5;
volatile int32_t hblank;
volatile int32_t __pad6;
volatile int32_t vsync;
volatile int32_t __pad7;
volatile int32_t vblank;
volatile int32_t __pad8;
volatile int32_t vtest;
volatile int32_t __pad9;
volatile int32_t ipdvint;
volatile int32_t __pad10;
volatile int32_t __pad11;
volatile int32_t __pad12;
volatile int32_t sticsr;
volatile int32_t __pad13;
volatile int32_t busdat;
volatile int32_t __pad14;
volatile int32_t busadr;
volatile int32_t __pad15;
volatile int32_t __pad16;
volatile int32_t __pad17;
volatile int32_t buscsr;
volatile int32_t __pad18;
volatile int32_t modcl;
volatile int32_t __pad19;
#else /* __alpha */
volatile int32_t __pad0;
volatile int32_t __pad1;
volatile int32_t hsync;
volatile int32_t hsync2;
volatile int32_t hblank;
volatile int32_t vsync;
volatile int32_t vblank;
volatile int32_t vtest;
volatile int32_t ipdvint;
volatile int32_t __pad2;
volatile int32_t sticsr;
volatile int32_t busdat;
volatile int32_t busadr;
volatile int32_t __pad3;
volatile int32_t buscsr;
volatile int32_t modcl;
#endif /* __alpha */
};
/*
* Bit definitions for px_stic_regs.stic_csr.
* these appear to exactly what the PROM tests use.
*/
#define STIC_CSR_TSTFNC 0x00000003
# define STIC_CSR_TSTFNC_NORMAL 0
# define STIC_CSR_TSTFNC_PARITY 1
# define STIC_CSR_TSTFNC_CNTPIX 2
# define STIC_CSR_TSTFNC_TSTDAC 3
#define STIC_CSR_CHECKPAR 0x00000004
#define STIC_CSR_STARTVT 0x00000010
#define STIC_CSR_START 0x00000020
#define STIC_CSR_RESET 0x00000040
#define STIC_CSR_STARTST 0x00000080
/*
* Bit definitions for stic_regs.int.
* Three four-bit wide fields, for error (E), vertical-blank (V), and
* packetbuf-done (P) intererupts, respectively.
* The low-order three bits of each field are enable, requested,
* and acknowledge bits. The top bit of each field is unused.
*/
#define STIC_INT_E_EN 0x00000001
#define STIC_INT_E 0x00000002
#define STIC_INT_E_WE 0x00000004
#define STIC_INT_V_EN 0x00000100
#define STIC_INT_V 0x00000200
#define STIC_INT_V_WE 0x00000400
#define STIC_INT_P_EN 0x00010000
#define STIC_INT_P 0x00020000
#define STIC_INT_P_WE 0x00040000
#define STIC_INT_E_MASK (STIC_INT_E_EN | STIC_INT_E | STIC_INT_E_WE)
#define STIC_INT_V_MASK (STIC_INT_V_EN | STIC_INT_V | STIC_INT_V_WE)
#define STIC_INT_P_MASK (STIC_INT_P_EN | STIC_INT_P | STIC_INT_P_WE)
#define STIC_INT_MASK (STIC_INT_E_MASK | STIC_INT_P_MASK | STIC_INT_V_MASK)
#define STIC_INT_WE (STIC_INT_E_WE | STIC_INT_V_WE | STIC_INT_P_WE)
#define STIC_INT_CLR (STIC_INT_E_EN | STIC_INT_V_EN | STIC_INT_P_EN)
/*
* Convert a system physical address to STIC poll offset. Polling the offset
* returned will initiate DMA at the provided address. For the PX, the STIC
* only sees 23-bits (8MB) of address space. Also, bits 21-22 in physical
* address space map to bits 27-28 in the STIC's warped view of the world.
* This is also true for bits 15-20, which map to bits 18-23. Bits 0 and 1
* are meaningless, because everything is word aligned.
*
* The final shift-right-by-9 is to map the address to poll register offset.
* These begin at px_softc.poll (which should obviously be added to the
* return value of this function to get a vaild poll address).
*
* This shift right gives us a granularity of 512 bytes when DMAing. The
* holes in STIC address space mean that DMAs can never cross a 32kB
* boundary. The maximum size for a DMA AFAIK is about 4kB.
*
* For the PXG, the PA is relative to SRAM (i.e. i860) address space, not
* system address space. The poll address will either return STAMP_OK, or
* STAMP_BUSY.
*/
static __inline__ u_long px_sys2stic __P((void *));
static __inline__ u_long px_sys2dma __P((void *));
static __inline__ volatile int32_t *px_poll_addr __P((caddr_t, void *));
static __inline__ u_long
px_sys2stic(addr)
void *addr;
{
u_long v;
v = (u_long)addr;
v = ((v & ~0x7fff) << 3) | (v & 0x7fff);
return (v & 0x1ffff800);
}
static __inline__ u_long
px_sys2dma(addr)
void *addr;
{
return px_sys2stic(addr) >> 9;
}
/*
* This is simply a wrapper for the above that returns a proper VA to
* poll when given a px_softc.
*/
static __inline__ volatile int32_t *
px_poll_addr(slotbase, addr)
caddr_t slotbase;
void *addr;
{
return (volatile int32_t *)(slotbase + px_sys2dma(addr));
}
#endif /* !_PMAX_DEV_PXREG_H_ */