This is the README file for ppp-2.4, a package which implements the
Point-to-Point Protocol (PPP) to provide Internet connections over
serial lines.
Introduction.
*************
The Point-to-Point Protocol (PPP) provides a standard way to establish
a network connection over a serial link. At present, this package
supports IP and the protocols layered above IP, such as TCP and UDP.
The Linux and Solaris ports of this package have optional support for
IPV6; the Linux port of this package also has support for IPX.
This software consists of two parts:
- Kernel code, which establishes a network interface and passes
packets between the serial port, the kernel networking code and the
PPP daemon (pppd). This code is implemented using STREAMS modules on
Solaris, and as a line discipline under Linux.
- The PPP daemon (pppd), which negotiates with the peer to establish
the link and sets up the ppp network interface. Pppd includes support
for authentication, so you can control which other systems may make a
PPP connection and what IP addresses they may use.
The platforms supported by this package are Linux and Solaris. I have
code for NeXTStep, FreeBSD, SunOS 4.x, SVR4, Tru64 (Digital Unix), AIX
and Ultrix but no active maintainers for these platforms. Code for
all of these except AIX is included in the ppp-2.3.11 release.
Installation.
*************
The file SETUP contains general information about setting up your
system for using PPP. There is also a README file for each supported
system, which contains more specific details for installing PPP on
that system. The supported systems, and the corresponding README
files, are:
Linux README.linux
Solaris README.sol2
In each case you start by running the ./configure script. This works
out which operating system you are using and creates the appropriate
makefiles. You then run `make' to compile the user-level code, and
(as root) `make install' to install the user-level programs pppd, chat
and pppstats.
N.B. Since 2.3.0, leaving the permitted IP addresses column of the
pap-secrets or chap-secrets file empty means that no addresses are
permitted. You need to put a "*" in that column to allow the peer to
use any IP address. (This only applies where the peer is
authenticating itself to you, of course.)
What's new in ppp-2.4.3.
************************
* The configure script now accepts --prefix and --sysconfdir options.
These default to /usr/local and /etc. If you want pppd put in
/usr/sbin as before, use ./configure --prefix=/usr.
* Doing `make install' no longer puts example configuration files in
/etc/ppp. Use `make install-etcppp' if you want that.
* The code has been updated to work with version 0.8.3 of libpcap.
Unfortunately the libpcap maintainers removed support for the
"inbound" and "outbound" keywords on PPP links, meaning that if you
link pppd with libpcap-0.8.3, you can't use those keywords in the
active-filter and pass-filter expressions. The support has been
reinstated in the CVS version and should be in future libpcap
releases. If you need the in/outbound keywords, use a later release
than 0.8.3, or get the CVS version from http://www.tcpdump.org.
* There is a new option, child-timeout, which sets the length of time
that pppd will wait for child processes (such as the command
specified with the pty option) to exit before exiting itself. It
defaults to 5 seconds. After the timeout, pppd will send a SIGTERM
to any remaining child processes and exit. A value of 0 means no
timeout.
* Various bugs have been fixed, including some CBCP packet parsing
bugs that could lead to the peer being able to crash pppd if CBCP
support is enabled.
* Various fixes and enhancements to the radius and rp-pppoe plugins
have been added.
* There is a new winbind plugin, from Andrew Bartlet of the Samba
team, which provides the ability to authenticate the peer against an
NT domain controller using MS-CHAP or MS-CHAPV2.
* There is a new pppoatm plugin, by various authors, sent in by David
Woodhouse.
* The multilink code has been substantially reworked. The first pppd
for a bundle still controls the ppp interface, but it doesn't exit
until all the links in the bundle have terminated. If the first
pppd is signalled to exit, it signals all the other pppds
controlling links in the bundle.
* The TDB code has been updated to the latest version. This should
eliminate the problem that some people have seen where the database
file (/var/run/pppd.tdb) keeps on growing. Unfortunately, however,
the new code uses an incompatible database format. For this reason,
pppd now uses /var/run/pppd2.tdb as the database filename.
What was new in ppp-2.4.2.
**************************
* The CHAP code has been rewritten. Pppd now has support for MS-CHAP
V1 and V2 authentication, both as server and client. The new CHAP
code is cleaner than the old code and avoids some copyright problems
that existed in the old code.
* MPPE (Microsoft Point-to-Point Encryption) support has been added,
although the current implementation shouldn't be considered
completely secure. (There is no assurance that the current code
won't ever transmit an unencrypted packet.)
* James Carlson's implementation of the Extensible Authentication
Protocol (EAP) has been added.
* Support for the Encryption Control Protocol (ECP) has been added.
* Some new plug-ins have been included:
- A plug-in for kernel-mode PPPoE (PPP over Ethernet)
- A plug-in for supplying the PAP password over a pipe from another
process
- A plug-in for authenticating using a Radius server.
* Updates and bug-fixes for the Solaris port.
* The CBCP (Call Back Control Protocol) code has been updated. There
are new options `remotenumber' and `allow-number'.
* Extra hooks for plugins to use have been added.
* There is now a `maxoctets' option, which causes pppd to terminate
the link once the number of bytes passed on the link exceeds a given
value.
* There are now options to control whether pppd can use the IPCP
IP-Address and IP-Addresses options: `ipcp-no-address' and
`ipcp-no-addresses'.
* Fixed several bugs, including potential buffer overflows in chat.
What was new in ppp-2.4.1.
**************************
* Pppd can now print out the set of options that are in effect. The
new `dump' option causes pppd to print out the option values after
option parsing is complete. The `dryrun' option causes pppd to
print the options and then exit.
* The option parsing code has been fixed so that options in the
per-tty options file are parsed correctly, and don't override values
from the command line in most cases.
* The plugin option now looks in /usr/lib/pppd/<pppd-version> (for
example, /usr/lib/pppd/2.4.1b1) for shared objects for plugins if
there is no slash in the plugin name.
* When loading a plugin, pppd will now check the version of pppd for
which the plugin was compiled, and refuse to load it if it is
different to pppd's version string. To enable this, the plugin
source needs to #include "pppd.h" and have a line saying:
char pppd_version[] = VERSION;
* There is a bug in zlib, discovered by James Carlson, which can cause
kernel memory corruption if Deflate is used with the lowest setting,
8. As a workaround pppd will now insist on using at least 9.
* Pppd should compile on Solaris and SunOS again.
* Pppd should now set the MTU correctly on demand-dialled interfaces.
What was new in ppp-2.4.0.
**************************
* Multilink: this package now allows you to combine multiple serial
links into one logical link or `bundle', for increased bandwidth and
reduced latency. This is currently only supported under the
2.4.x and later Linux kernels.
* All the pppd processes running on a system now write information
into a common database. I used the `tdb' code from samba for this.
* New hooks have been added.
For a list of the changes made during the 2.3 series releases of this
package, see the Changes-2.3 file.
Compression methods.
********************
This package supports two packet compression methods: Deflate and
BSD-Compress. Other compression methods which are in common use
include Predictor, LZS, and MPPC. These methods are not supported for
two reasons - they are patent-encumbered, and they cause some packets
to expand slightly, which pppd doesn't currently allow for.
BSD-Compress and Deflate (which uses the same algorithm as gzip) don't
ever expand packets.
Patents.
********
The BSD-Compress algorithm used for packet compression is the same as
that used in the Unix "compress" command. It was apparently covered
by U.S. patents 4,814,746 (owned by IBM) and 4,558,302 (owned by
Unisys), and corresponding patents in various other countries (but not
Australia). Apparently the Unisys patent expired in the US on 20 June
2003, but the IBM patent is still pending.
If these patents are of concern in your situation, you can build the
package without including BSD-Compress. To do this, edit
net/ppp-comp.h to change the definition of DO_BSD_COMPRESS to 0. The
bsd-comp.c files are then no longer needed, so the references to
bsd-comp.o may optionally be removed from the Makefiles.
Contacts.
*********
The comp.protocols.ppp newsgroup is a useful place to get help if you
have trouble getting your ppp connections to work. Please do not send
me questions of the form "please help me get connected to my ISP" -
I'm sorry, but I simply do not have the time to answer all the
questions like this that I get.
If you find bugs in this package, please report them to the maintainer
for the port for the operating system you are using:
Linux Paul Mackerras <paulus@samba.org>
Solaris James Carlson <carlson@workingcode.com>
Copyrights:
***********
All of the code can be freely used and redistributed. The individual
source files each have their own copyright and permission notice.
Pppd, pppstats and pppdump are under BSD-style notices. Some of the
pppd plugins are GPL'd. Chat is public domain.
Distribution:
*************
The primary site for releases of this software is:
ftp://ftp.samba.org/pub/ppp/
(Id: README,v 1.35 2004/11/13 12:25:54 paulus Exp)
bd797f6b31