NetBSD/sys/dev/usb/umct.c

637 lines
16 KiB
C

/* $NetBSD: umct.c,v 1.15 2004/09/13 12:55:49 drochner Exp $ */
/*
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Ichiro FUKUHARA (ichiro@ichiro.org).
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* MCT USB-RS232 Interface Controller
* http://www.mct.com.tw/prod/rs232.html
* http://www.dlink.com/products/usb/dsbs25
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: umct.c,v 1.15 2004/09/13 12:55:49 drochner Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/ioctl.h>
#include <sys/conf.h>
#include <sys/tty.h>
#include <sys/file.h>
#include <sys/select.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/device.h>
#include <sys/poll.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbcdc.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/usb_quirks.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/ucomvar.h>
#include <dev/usb/umct.h>
#ifdef UMCT_DEBUG
#define DPRINTFN(n, x) if (umctdebug > (n)) logprintf x
int umctdebug = 0;
#else
#define DPRINTFN(n, x)
#endif
#define DPRINTF(x) DPRINTFN(0, x)
#define UMCT_CONFIG_INDEX 0
#define UMCT_IFACE_INDEX 0
struct umct_softc {
USBBASEDEVICE sc_dev; /* base device */
usbd_device_handle sc_udev; /* USB device */
usbd_interface_handle sc_iface; /* interface */
int sc_iface_number; /* interface number */
u_int16_t sc_product;
int sc_intr_number; /* interrupt number */
usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */
u_char *sc_intr_buf; /* interrupt buffer */
int sc_isize;
usb_cdc_line_state_t sc_line_state; /* current line state */
u_char sc_dtr; /* current DTR state */
u_char sc_rts; /* current RTS state */
u_char sc_break; /* set break */
u_char sc_status;
device_ptr_t sc_subdev; /* ucom device */
u_char sc_dying; /* disconnecting */
u_char sc_lsr; /* Local status register */
u_char sc_msr; /* umct status register */
u_int last_lcr; /* keep lcr register */
};
/*
* These are the maximum number of bytes transferred per frame.
* The output buffer size cannot be increased due to the size encoding.
*/
#define UMCTIBUFSIZE 256
#define UMCTOBUFSIZE 256
Static void umct_init(struct umct_softc *);
Static void umct_set_baudrate(struct umct_softc *, u_int);
Static void umct_set_lcr(struct umct_softc *, u_int);
Static void umct_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);
Static void umct_set(void *, int, int, int);
Static void umct_dtr(struct umct_softc *, int);
Static void umct_rts(struct umct_softc *, int);
Static void umct_break(struct umct_softc *, int);
Static void umct_set_line_state(struct umct_softc *);
Static void umct_get_status(void *, int portno, u_char *lsr, u_char *msr);
Static int umct_param(void *, int, struct termios *);
Static int umct_open(void *, int);
Static void umct_close(void *, int);
struct ucom_methods umct_methods = {
umct_get_status,
umct_set,
umct_param,
NULL,
umct_open,
umct_close,
NULL,
NULL,
};
static const struct usb_devno umct_devs[] = {
/* MCT USB-232 Interface Products */
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232 },
/* Sitecom USB-232 Products */
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_SITECOM_USB232 },
/* D-Link DU-H3SP USB BAY Hub Products */
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_DU_H3SP_USB232 },
/* BELKIN F5U109 */
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U109 },
};
#define umct_lookup(v, p) usb_lookup(umct_devs, v, p)
USB_DECLARE_DRIVER(umct);
USB_MATCH(umct)
{
USB_MATCH_START(umct, uaa);
if (uaa->iface != NULL)
return (UMATCH_NONE);
return (umct_lookup(uaa->vendor, uaa->product) != NULL ?
UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
}
USB_ATTACH(umct)
{
USB_ATTACH_START(umct, sc, uaa);
usbd_device_handle dev = uaa->device;
usb_config_descriptor_t *cdesc;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char devinfo[1024];
char *devname = USBDEVNAME(sc->sc_dev);
usbd_status err;
int i;
struct ucom_attach_args uca;
usbd_devinfo(dev, 0, devinfo, sizeof(devinfo));
USB_ATTACH_SETUP;
printf("%s: %s\n", devname, devinfo);
sc->sc_udev = dev;
sc->sc_product = uaa->product;
DPRINTF(("\n\numct attach: sc=%p\n", sc));
/* initialize endpoints */
uca.bulkin = uca.bulkout = -1;
sc->sc_intr_number = -1;
sc->sc_intr_pipe = NULL;
/* Move the device into the configured state. */
err = usbd_set_config_index(dev, UMCT_CONFIG_INDEX, 1);
if (err) {
printf("\n%s: failed to set configuration, err=%s\n",
devname, usbd_errstr(err));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
/* get the config descriptor */
cdesc = usbd_get_config_descriptor(sc->sc_udev);
if (cdesc == NULL) {
printf("%s: failed to get configuration descriptor\n",
USBDEVNAME(sc->sc_dev));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
/* get the interface */
err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX,
&sc->sc_iface);
if (err) {
printf("\n%s: failed to get interface, err=%s\n",
devname, usbd_errstr(err));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
/* Find the bulk{in,out} and interrupt endpoints */
id = usbd_get_interface_descriptor(sc->sc_iface);
sc->sc_iface_number = id->bInterfaceNumber;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n",
USBDEVNAME(sc->sc_dev), i);
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
/*
* The Bulkin endpoint is marked as an interrupt. Since
* we can't rely on the endpoint descriptor order, we'll
* check the wMaxPacketSize field to differentiate.
*/
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT &&
UGETW(ed->wMaxPacketSize) != 0x2) {
uca.bulkin = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->sc_intr_number = ed->bEndpointAddress;
sc->sc_isize = UGETW(ed->wMaxPacketSize);
}
}
if (uca.bulkin == -1) {
printf("%s: Could not find data bulk in\n",
USBDEVNAME(sc->sc_dev));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
if (uca.bulkout == -1) {
printf("%s: Could not find data bulk out\n",
USBDEVNAME(sc->sc_dev));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
if (sc->sc_intr_number== -1) {
printf("%s: Could not find interrupt in\n",
USBDEVNAME(sc->sc_dev));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
sc->sc_dtr = sc->sc_rts = 0;
uca.portno = UCOM_UNK_PORTNO;
/* bulkin, bulkout set above */
uca.ibufsize = UMCTIBUFSIZE;
if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232)
uca.obufsize = 16; /* device is broken */
else
uca.obufsize = UMCTOBUFSIZE;
uca.ibufsizepad = UMCTIBUFSIZE;
uca.opkthdrlen = 0;
uca.device = dev;
uca.iface = sc->sc_iface;
uca.methods = &umct_methods;
uca.arg = sc;
uca.info = NULL;
umct_init(sc);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
USBDEV(sc->sc_dev));
DPRINTF(("umct: in=0x%x out=0x%x intr=0x%x\n",
uca.bulkin, uca.bulkout, sc->sc_intr_number ));
sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca,
ucomprint, ucomsubmatch);
USB_ATTACH_SUCCESS_RETURN;
}
USB_DETACH(umct)
{
USB_DETACH_START(umct, sc);
int rv = 0;
DPRINTF(("umct_detach: sc=%p flags=%d\n", sc, flags));
if (sc->sc_intr_pipe != NULL) {
usbd_abort_pipe(sc->sc_intr_pipe);
usbd_close_pipe(sc->sc_intr_pipe);
free(sc->sc_intr_buf, M_USBDEV);
sc->sc_intr_pipe = NULL;
}
sc->sc_dying = 1;
if (sc->sc_subdev != NULL) {
rv = config_detach(sc->sc_subdev, flags);
sc->sc_subdev = NULL;
}
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
USBDEV(sc->sc_dev));
return (rv);
}
int
umct_activate(device_ptr_t self, enum devact act)
{
struct umct_softc *sc = (struct umct_softc *)self;
int rv = 0;
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
case DVACT_DEACTIVATE:
if (sc->sc_subdev != NULL)
rv = config_deactivate(sc->sc_subdev);
sc->sc_dying = 1;
break;
}
return (rv);
}
void
umct_set_line_state(struct umct_softc *sc)
{
usb_device_request_t req;
uByte ls;
ls = (sc->sc_dtr ? MCR_DTR : 0) |
(sc->sc_rts ? MCR_RTS : 0);
DPRINTF(("umct_set_line_state: DTR=%d,RTS=%d,ls=%02x\n",
sc->sc_dtr, sc->sc_rts, ls));
req.bmRequestType = UMCT_SET_REQUEST;
req.bRequest = REQ_SET_MCR;
USETW(req.wValue, 0);
USETW(req.wIndex, sc->sc_iface_number);
USETW(req.wLength, LENGTH_SET_MCR);
(void)usbd_do_request(sc->sc_udev, &req, &ls);
}
void
umct_set(void *addr, int portno, int reg, int onoff)
{
struct umct_softc *sc = addr;
switch (reg) {
case UCOM_SET_DTR:
umct_dtr(sc, onoff);
break;
case UCOM_SET_RTS:
umct_rts(sc, onoff);
break;
case UCOM_SET_BREAK:
umct_break(sc, onoff);
break;
default:
break;
}
}
void
umct_dtr(struct umct_softc *sc, int onoff)
{
DPRINTF(("umct_dtr: onoff=%d\n", onoff));
if (sc->sc_dtr == onoff)
return;
sc->sc_dtr = onoff;
umct_set_line_state(sc);
}
void
umct_rts(struct umct_softc *sc, int onoff)
{
DPRINTF(("umct_rts: onoff=%d\n", onoff));
if (sc->sc_rts == onoff)
return;
sc->sc_rts = onoff;
umct_set_line_state(sc);
}
void
umct_break(struct umct_softc *sc, int onoff)
{
DPRINTF(("umct_break: onoff=%d\n", onoff));
umct_set_lcr(sc, onoff ? sc->last_lcr | LCR_SET_BREAK :
sc->last_lcr);
}
void
umct_set_lcr(struct umct_softc *sc, u_int data)
{
usb_device_request_t req;
uByte adata;
adata = data;
req.bmRequestType = UMCT_SET_REQUEST;
req.bRequest = REQ_SET_LCR;
USETW(req.wValue, 0);
USETW(req.wIndex, sc->sc_iface_number);
USETW(req.wLength, LENGTH_SET_LCR);
(void)usbd_do_request(sc->sc_udev, &req, &adata); /* XXX should check */
}
void
umct_set_baudrate(struct umct_softc *sc, u_int rate)
{
usb_device_request_t req;
uDWord arate;
u_int val;
if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232 ||
sc->sc_product == USB_PRODUCT_BELKIN_F5U109) {
switch (rate) {
case 300: val = 0x01; break;
case 600: val = 0x02; break;
case 1200: val = 0x03; break;
case 2400: val = 0x04; break;
case 4800: val = 0x06; break;
case 9600: val = 0x08; break;
case 19200: val = 0x09; break;
case 38400: val = 0x0a; break;
case 57600: val = 0x0b; break;
case 115200: val = 0x0c; break;
default: val = -1; break;
}
} else {
val = UMCT_BAUD_RATE(rate);
}
USETDW(arate, val);
req.bmRequestType = UMCT_SET_REQUEST;
req.bRequest = REQ_SET_BAUD_RATE;
USETW(req.wValue, 0);
USETW(req.wIndex, sc->sc_iface_number);
USETW(req.wLength, LENGTH_BAUD_RATE);
(void)usbd_do_request(sc->sc_udev, &req, arate); /* XXX should check */
}
void
umct_init(struct umct_softc *sc)
{
umct_set_baudrate(sc, 9600);
umct_set_lcr(sc, LCR_DATA_BITS_8 | LCR_PARITY_NONE | LCR_STOP_BITS_1);
}
int
umct_param(void *addr, int portno, struct termios *t)
{
struct umct_softc *sc = addr;
u_int data = 0;
DPRINTF(("umct_param: sc=%p\n", sc));
DPRINTF(("umct_param: BAUDRATE=%d\n", t->c_ospeed));
if (ISSET(t->c_cflag, CSTOPB))
data |= LCR_STOP_BITS_2;
else
data |= LCR_STOP_BITS_1;
if (ISSET(t->c_cflag, PARENB)) {
if (ISSET(t->c_cflag, PARODD))
data |= LCR_PARITY_ODD;
else
data |= LCR_PARITY_EVEN;
} else
data |= LCR_PARITY_NONE;
switch (ISSET(t->c_cflag, CSIZE)) {
case CS5:
data |= LCR_DATA_BITS_5;
break;
case CS6:
data |= LCR_DATA_BITS_6;
break;
case CS7:
data |= LCR_DATA_BITS_7;
break;
case CS8:
data |= LCR_DATA_BITS_8;
break;
}
umct_set_baudrate(sc, t->c_ospeed);
sc->last_lcr = data;
umct_set_lcr(sc, data);
return (0);
}
int
umct_open(void *addr, int portno)
{
struct umct_softc *sc = addr;
int err, lcr_data;
if (sc->sc_dying)
return (EIO);
DPRINTF(("umct_open: sc=%p\n", sc));
/* initialize LCR */
lcr_data = LCR_DATA_BITS_8 | LCR_PARITY_NONE |
LCR_STOP_BITS_1;
umct_set_lcr(sc, lcr_data);
if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
sc->sc_status = 0; /* clear status bit */
sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number,
USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc,
sc->sc_intr_buf, sc->sc_isize,
umct_intr, USBD_DEFAULT_INTERVAL);
if (err) {
DPRINTF(("%s: cannot open interrupt pipe (addr %d)\n",
USBDEVNAME(sc->sc_dev), sc->sc_intr_number));
return (EIO);
}
}
return (0);
}
void
umct_close(void *addr, int portno)
{
struct umct_softc *sc = addr;
int err;
if (sc->sc_dying)
return;
DPRINTF(("umct_close: close\n"));
if (sc->sc_intr_pipe != NULL) {
err = usbd_abort_pipe(sc->sc_intr_pipe);
if (err)
printf("%s: abort interrupt pipe failed: %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
err = usbd_close_pipe(sc->sc_intr_pipe);
if (err)
printf("%s: close interrupt pipe failed: %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
free(sc->sc_intr_buf, M_USBDEV);
sc->sc_intr_pipe = NULL;
}
}
void
umct_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct umct_softc *sc = priv;
u_char *buf = sc->sc_intr_buf;
u_char mstatus;
if (sc->sc_dying)
return;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
DPRINTF(("%s: abnormal status: %s\n", USBDEVNAME(sc->sc_dev),
usbd_errstr(status)));
usbd_clear_endpoint_stall_async(sc->sc_intr_pipe);
return;
}
DPRINTF(("%s: umct status = MSR:%02x, LSR:%02x\n",
USBDEVNAME(sc->sc_dev), buf[0],buf[1]));
sc->sc_lsr = sc->sc_msr = 0;
mstatus = buf[0];
if (ISSET(mstatus, MSR_DSR))
sc->sc_msr |= UMSR_DSR;
if (ISSET(mstatus, MSR_DCD))
sc->sc_msr |= UMSR_DCD;
ucom_status_change((struct ucom_softc *)sc->sc_subdev);
}
void
umct_get_status(void *addr, int portno, u_char *lsr, u_char *msr)
{
struct umct_softc *sc = addr;
DPRINTF(("umct_get_status:\n"));
if (lsr != NULL)
*lsr = sc->sc_lsr;
if (msr != NULL)
*msr = sc->sc_msr;
}