NetBSD/sys/arch/evbppc/explora/explora_start.S
hannken 249e0067fe Add a port to the NCD Explora451 ThinClient.
- Supported devices: le, com, lpt, pckbd, frame buffer.
 - Support missing:   phy, audio, pcmcia.
 - Boots from network or md.

Approved by: Eduardo Horvath <eeh@netbsd.org>
2003-03-11 10:57:54 +00:00

227 lines
4.9 KiB
ArmAsm

/* $NetBSD: explora_start.S,v 1.1 2003/03/11 10:57:56 hannken Exp $ */
/*-
* Copyright (c) 2003 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Juergen Hannken-Illjes.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Initial state:
*
* iccr = 0x00008001 0x80000000-0x87ffffff 0xf80000000-0xffffffff
* dccr = 0x00008001 0x80000000-0x87ffffff 0xf80000000-0xffffffff
* dcwr = 0x00000000
* msr = 0x00001000 ME=machine check enable
*
*/
#include "assym.h"
#include <machine/param.h>
#include <machine/psl.h>
#include <machine/trap.h>
#include <machine/asm.h>
#include <powerpc/spr.h>
#include <powerpc/ibm4xx/dcr403cgx.h>
#include <powerpc/ibm4xx/pmap.h>
#include "opt_ddb.h"
#include "opt_ppcparam.h"
GLOBAL(proc0paddr)
.long 0 /* proc0 p_addr */
GLOBAL(intrnames)
.asciz "irq0", "irq1", "irq2", "irq3"
.asciz "irq4", "irq5", "irq6", "irq7"
.asciz "irq8", "irq9", "irq10", "irq11"
.asciz "irq12", "irq13", "irq14", "irq15"
.asciz "irq16", "irq17", "irq18", "softnet"
.asciz "softclock", "softserial", "clock", "statclock"
.asciz "irq24", "irq25", "irq26", "irq27"
.asciz "irq28", "irq29", "irq30", "irq31"
GLOBAL(eintrnames)
.align 4
GLOBAL(intrcnt)
.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
GLOBAL(eintrcnt)
/*
* Initially the dram starts at 0x01000000. This is way too high.
* We relocate dram to 0x00000000. We use the video ram at 0xf0000000
* as a temporary staging area.
*/
#define STAGE1_BASE 0xf0000000
.text
.globl __start
__start:
b 1f
nop
nop
.long 0
.ascii "XncdPPC\0"
.long 0
.long 0
1:
/* Disable exceptions, caches, invalidate all TLB's. */
li 0,0
mtmsr 0
mttcr 0
mtdccr 0
mticcr 0
sync
isync
/* Clear caches and invalidate tlbs */
li 7,256
mtctr 7
li 6,0
1:
dccci 0,6
addi 6,6,16
bdnz 1b
li 7,512
mtctr 7
li 6,0
1:
iccci 0,6
addi 6,6,16
bdnz 1b
tlbia
sync
isync
/* Get current address -- NOT the same as . */
bl _next
_next:
mflr 3
subi 3,3,_next-__start
lis 4,STAGE1_BASE@h
ori 4,4,STAGE1_BASE@l
li 5,stage1size
1:
lbz 1,0(3)
mr 0,5
cmpwi 0,0
stb 1,0(4)
addi 3,3,1
addi 4,4,1
addi 5,5,-1
bgt 1b
/* Jump into the staging area so we can remap the dram. */
lis 0,stage1reloc@h
ori 0,0,stage1reloc@l
mtlr 0
blr
stage1reloc = .-__start+STAGE1_BASE
/* Remap the dram from 0x01000000 to 0x00000000. */
#define REMAP(r, tmp1, tmp2) \
mfbr##r tmp1 ; \
lis tmp2,0xff ; \
ori tmp2,tmp2,0xffff ; \
cmplw tmp1,tmp2 ; \
ble 1f ; \
addis tmp1,tmp1,0xf000 ; \
mtbr##r tmp1 ; \
1:
REMAP(4, 1, 2)
REMAP(5, 1, 2)
REMAP(6, 1, 2)
REMAP(7, 1, 2)
#undef REMAP
/* Initial setup. */
ba stage2
stage2:
#ifdef PPC_4XX_NOCACHE
li 0,0
#else
lis 0,0xfffc
#endif
mtdccr 0
mticcr 0
sync
isync
/* get start of bss */
lis 7,_C_LABEL(edata)-4@h
ori 7,7,_C_LABEL(edata)-4@l
/* get end of kernel */
lis 4,_C_LABEL(end)@h
ori 4,4,_C_LABEL(end)@l
/* clear bss */
li 3,0
1:
stwu 3,4(7)
cmpw 7,4
bne+ 1b
INIT_CPUINFO(4,1,9,0)
lis 3,__start@h
ori 3,3,__start@l
/* Run the remaining setup in C. */
bl _C_LABEL(bootstrap)
bl _C_LABEL(main)
/* NOTREACHED */
2: nop
b 2b
stage1size = .-__start
#include <powerpc/ibm4xx/4xx_locore.S>