397 lines
11 KiB
C
397 lines
11 KiB
C
/* $NetBSD: esp.c,v 1.9 1998/11/19 21:49:46 thorpej Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1997 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jeremy Cooper and Gordon W. Ross
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* "Front end" glue for the ncr53c9x chip, formerly known as the
|
|
* Emulex SCSI Processor (ESP) which is what we actually have.
|
|
*/
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/device.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/user.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
#include <dev/scsipi/scsi_message.h>
|
|
|
|
#include <machine/autoconf.h>
|
|
|
|
#include <dev/ic/ncr53c9xreg.h>
|
|
#include <dev/ic/ncr53c9xvar.h>
|
|
|
|
#include <sun3/dev/dmareg.h>
|
|
#include <sun3/dev/dmavar.h>
|
|
|
|
#define ESP_REG_SIZE (12*4)
|
|
#define ESP_DMA_OFF 0x1000
|
|
|
|
struct esp_softc {
|
|
struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */
|
|
volatile u_char *sc_reg; /* the registers */
|
|
struct dma_softc *sc_dma; /* pointer to my dma */
|
|
};
|
|
|
|
static int espmatch __P((struct device *, struct cfdata *, void *));
|
|
static void espattach __P((struct device *, struct device *, void *));
|
|
|
|
struct cfattach esp_ca = {
|
|
sizeof(struct esp_softc), espmatch, espattach
|
|
};
|
|
|
|
struct scsipi_device esp_dev = {
|
|
NULL, /* Use default error handler */
|
|
NULL, /* have a queue, served by this */
|
|
NULL, /* have no async handler */
|
|
NULL, /* Use default 'done' routine */
|
|
};
|
|
|
|
/*
|
|
* Functions and the switch for the MI code.
|
|
*/
|
|
u_char esp_read_reg __P((struct ncr53c9x_softc *, int));
|
|
void esp_write_reg __P((struct ncr53c9x_softc *, int, u_char));
|
|
int esp_dma_isintr __P((struct ncr53c9x_softc *));
|
|
void esp_dma_reset __P((struct ncr53c9x_softc *));
|
|
int esp_dma_intr __P((struct ncr53c9x_softc *));
|
|
int esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *,
|
|
size_t *, int, size_t *));
|
|
void esp_dma_go __P((struct ncr53c9x_softc *));
|
|
void esp_dma_stop __P((struct ncr53c9x_softc *));
|
|
int esp_dma_isactive __P((struct ncr53c9x_softc *));
|
|
|
|
static struct ncr53c9x_glue esp_glue = {
|
|
esp_read_reg,
|
|
esp_write_reg,
|
|
esp_dma_isintr,
|
|
esp_dma_reset,
|
|
esp_dma_intr,
|
|
esp_dma_setup,
|
|
esp_dma_go,
|
|
esp_dma_stop,
|
|
esp_dma_isactive,
|
|
NULL, /* gl_clear_latched_intr */
|
|
};
|
|
|
|
extern int ncr53c9x_dmaselect; /* Used in dev/ic/ncr53c9x.c */
|
|
|
|
static int
|
|
espmatch(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
struct confargs *ca = aux;
|
|
|
|
/*
|
|
* Check for the DMA registers.
|
|
*/
|
|
if (bus_peek(ca->ca_bustype,
|
|
ca->ca_paddr + ESP_DMA_OFF, 4) == -1)
|
|
return (0);
|
|
|
|
/*
|
|
* Check for the esp registers.
|
|
*/
|
|
if (bus_peek(ca->ca_bustype,
|
|
ca->ca_paddr + (NCR_STAT * 4), 1) == -1)
|
|
return (0);
|
|
|
|
/* If default ipl, fill it in. */
|
|
if (ca->ca_intpri == -1)
|
|
ca->ca_intpri = 2;
|
|
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Attach this instance, and then all the sub-devices
|
|
*
|
|
* In the SPARC port, the dma code used by the esp driver looks like
|
|
* a separate driver, matched and attached by either the esp driver
|
|
* or the bus attach function. However it's not completely separate
|
|
* in that the sparc esp driver has to go look in dma_cd.cd_devs to
|
|
* get the softc for the dma driver, and shares its softc, etc.
|
|
*
|
|
* The dma module could exist as a separate autoconfig entity, but
|
|
* that really does not buy us anything, so why bother with that?
|
|
* In the current sun3x port, the dma chip is treated as just an
|
|
* extension of the esp driver because that is easier, and the esp
|
|
* driver is the only one that uses the dma module.
|
|
*/
|
|
static void
|
|
espattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
register struct confargs *ca = aux;
|
|
struct esp_softc *esc = (void *)self;
|
|
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
|
|
|
|
/*
|
|
* Set up glue for MI code early; we use some of it here.
|
|
*/
|
|
sc->sc_glue = &esp_glue;
|
|
|
|
/*
|
|
* Map in the ESP registers.
|
|
*/
|
|
esc->sc_reg = (volatile u_char *)
|
|
bus_mapin(ca->ca_bustype, ca->ca_paddr, NBPG);
|
|
|
|
/* Other settings */
|
|
sc->sc_id = 7;
|
|
sc->sc_freq = 20; /* The 3/80 esp runs at 20 Mhz */
|
|
|
|
/*
|
|
* Hook up the DMA driver.
|
|
* XXX - Would rather do this later, after the common
|
|
* attach function is done printing its line so the DMA
|
|
* module can print its revision, but the common attach
|
|
* code needs this done first...
|
|
* XXX - Move printf back to MD code?
|
|
*/
|
|
esc->sc_dma = malloc(sizeof(struct dma_softc), M_DEVBUF, M_NOWAIT);
|
|
if (esc->sc_dma == 0)
|
|
panic("espattach: malloc dma_softc");
|
|
bzero(esc->sc_dma, sizeof(struct dma_softc));
|
|
esc->sc_dma->sc_esp = sc; /* Point back to us */
|
|
esc->sc_dma->sc_regs = (struct dma_regs *)
|
|
(esc->sc_reg + ESP_DMA_OFF);
|
|
|
|
/*
|
|
* Simulate an attach call here for compatibility with
|
|
* the sparc dma.c module. It does not print anything.
|
|
*/
|
|
dmaattach(self, (struct device *) esc->sc_dma, NULL);
|
|
|
|
/*
|
|
* XXX More of this should be in ncr53c9x_attach(), but
|
|
* XXX should we really poke around the chip that much in
|
|
* XXX the MI code? Think about this more...
|
|
*/
|
|
|
|
/*
|
|
* It is necessary to try to load the 2nd config register here,
|
|
* to find out what rev the esp chip is, else the ncr53c9x_reset
|
|
* will not set up the defaults correctly.
|
|
*/
|
|
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
|
|
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE;
|
|
sc->sc_cfg3 = NCRCFG3_CDB;
|
|
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
|
|
|
|
if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) !=
|
|
(NCRCFG2_SCSI2 | NCRCFG2_RPE)) {
|
|
sc->sc_rev = NCR_VARIANT_ESP100;
|
|
} else {
|
|
sc->sc_cfg2 = NCRCFG2_SCSI2;
|
|
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
|
|
sc->sc_cfg3 = 0;
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK);
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
if (NCR_READ_REG(sc, NCR_CFG3) !=
|
|
(NCRCFG3_CDB | NCRCFG3_FCLK)) {
|
|
sc->sc_rev = NCR_VARIANT_ESP100A;
|
|
} else {
|
|
/* NCRCFG2_FE enables > 64K transfers */
|
|
sc->sc_cfg2 |= NCRCFG2_FE;
|
|
sc->sc_cfg3 = 0;
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
sc->sc_rev = NCR_VARIANT_ESP200;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* XXX minsync and maxxfer _should_ be set up in MI code,
|
|
* XXX but it appears to have some dependency on what sort
|
|
* XXX of DMA we're hooked up to, etc.
|
|
*/
|
|
|
|
/*
|
|
* This is the value used to start sync negotiations
|
|
* Note that the NCR register "SYNCTP" is programmed
|
|
* in "clocks per byte", and has a minimum value of 4.
|
|
* The SCSI period used in negotiation is one-fourth
|
|
* of the time (in nanoseconds) needed to transfer one byte.
|
|
* Since the chip's clock is given in MHz, we have the following
|
|
* formula: 4 * period = (1000 / freq) * 4
|
|
*/
|
|
sc->sc_minsync = 1000 / sc->sc_freq;
|
|
|
|
/*
|
|
* Alas, we must now modify the value a bit, because it's
|
|
* only valid when can switch on FASTCLK and FASTSCSI bits
|
|
* in config register 3...
|
|
*/
|
|
switch (sc->sc_rev) {
|
|
case NCR_VARIANT_ESP100:
|
|
sc->sc_maxxfer = 64 * 1024;
|
|
sc->sc_minsync = 0; /* No synch on old chip? */
|
|
/* Avoid hardware bug by using DMA when selecting targets */
|
|
/* ncr53c9x_dmaselect = 1; */
|
|
break;
|
|
|
|
case NCR_VARIANT_ESP100A:
|
|
sc->sc_maxxfer = 64 * 1024;
|
|
/* Min clocks/byte is 5 */
|
|
sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5);
|
|
break;
|
|
|
|
case NCR_VARIANT_ESP200:
|
|
sc->sc_maxxfer = 16 * 1024 * 1024;
|
|
/* XXX - do actually set FAST* bits */
|
|
break;
|
|
}
|
|
|
|
/* and the interuppts */
|
|
isr_add_autovect((void*)ncr53c9x_intr, sc, ca->ca_intpri);
|
|
evcnt_attach(&sc->sc_dev, "intr", &sc->sc_intrcnt);
|
|
|
|
/* Do the common parts of attachment. */
|
|
sc->sc_adapter.scsipi_cmd = ncr53c9x_scsi_cmd;
|
|
sc->sc_adapter.scsipi_minphys = minphys;
|
|
ncr53c9x_attach(sc, &esp_dev);
|
|
}
|
|
|
|
|
|
/*
|
|
* Glue functions.
|
|
*/
|
|
|
|
u_char
|
|
esp_read_reg(sc, reg)
|
|
struct ncr53c9x_softc *sc;
|
|
int reg;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (esc->sc_reg[reg * 4]);
|
|
}
|
|
|
|
void
|
|
esp_write_reg(sc, reg, val)
|
|
struct ncr53c9x_softc *sc;
|
|
int reg;
|
|
u_char val;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
u_char v = val;
|
|
|
|
esc->sc_reg[reg * 4] = v;
|
|
}
|
|
|
|
int
|
|
esp_dma_isintr(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (dma_isintr(esc->sc_dma));
|
|
}
|
|
|
|
void
|
|
esp_dma_reset(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
dma_reset(esc->sc_dma);
|
|
}
|
|
|
|
int
|
|
esp_dma_intr(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (espdmaintr(esc->sc_dma));
|
|
}
|
|
|
|
int
|
|
esp_dma_setup(sc, addr, len, datain, dmasize)
|
|
struct ncr53c9x_softc *sc;
|
|
caddr_t *addr;
|
|
size_t *len;
|
|
int datain;
|
|
size_t *dmasize;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (dma_setup(esc->sc_dma, addr, len, datain, dmasize));
|
|
}
|
|
|
|
void
|
|
esp_dma_go(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
/* Start DMA */
|
|
DMACSR(esc->sc_dma) |= D_EN_DMA;
|
|
esc->sc_dma->sc_active = 1;
|
|
}
|
|
|
|
void
|
|
esp_dma_stop(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
DMACSR(esc->sc_dma) &= ~D_EN_DMA;
|
|
}
|
|
|
|
int
|
|
esp_dma_isactive(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (esc->sc_dma->sc_active);
|
|
}
|