NetBSD/sys/dev/isa/adv_isa.c

269 lines
7.3 KiB
C

/* $NetBSD: adv_isa.c,v 1.5 2002/01/07 21:47:03 thorpej Exp $ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved.
*
* Author: Baldassare Dante Profeta <dante@mclink.it>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device probe and attach routines for the following
* Advanced Systems Inc. SCSI controllers:
*
* Connectivity Products:
* ABP510/5150 - Bus-Master ISA (240 CDB) (Footnote 1)
* ABP5140 - Bus-Master ISA (16 CDB) (Footnote 1) (Footnote 2)
* ABP5142 - Bus-Master ISA with floppy (16 CDB) (Footnote 3)
*
* Single Channel Products:
* ABP542 - Bus-Master ISA with floppy (240 CDB)
* ABP842 - Bus-Master VL (240 CDB)
*
* Dual Channel Products:
* ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel)
*
* Footnotes:
* 1. This board has been shipped by HP with the 4020i CD-R drive.
* The board has no BIOS so it cannot control a boot device, but
* it can control any secondary SCSI device.
* 2. This board has been sold by SIIG as the i540 SpeedMaster.
* 3. This board has been sold by SIIG as the i542 SpeedMaster.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: adv_isa.c,v 1.5 2002/01/07 21:47:03 thorpej Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/queue.h>
#include <machine/bus.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/isa/isavar.h>
#include <dev/ic/advlib.h>
#include <dev/ic/adv.h>
/* Possible port addresses an ISA or VL adapter can live at */
static int asc_ioport[ASC_IOADR_TABLE_MAX_IX] =
{
0x100,
ASC_IOADR_1, /* First selection in BIOS setup */
0x120,
ASC_IOADR_2, /* Second selection in BIOS setup */
0x140,
ASC_IOADR_3, /* Third selection in BIOS setup */
ASC_IOADR_4, /* Fourth selection in BIOS setup */
ASC_IOADR_5, /* Fifth selection in BIOS setup */
ASC_IOADR_6, /* Sixth selection in BIOS setup */
ASC_IOADR_7, /* Seventh selection in BIOS setup */
ASC_IOADR_8 /* Eighth and default selection in BIOS setup */
};
/******************************************************************************/
int adv_isa_probe __P((struct device *, struct cfdata *, void *));
void adv_isa_attach __P((struct device *, struct device *, void *));
struct cfattach adv_isa_ca =
{
sizeof(ASC_SOFTC), adv_isa_probe, adv_isa_attach
};
/******************************************************************************/
int
adv_isa_probe(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
int port_index;
int iobase, irq, drq;
int rv = 0;
if (ia->ia_nio < 1)
return (0);
if (ia->ia_nirq < 1)
return (0);
if (ia->ia_ndrq < 1)
return (0);
if (ISA_DIRECT_CONFIG(ia))
return (0);
/*
* If the I/O address is wildcarded, look for boards
* in ascending order.
*/
if (ia->ia_io[0].ir_addr == ISACF_PORT_DEFAULT) {
for (port_index = 0; port_index < ASC_IOADR_TABLE_MAX_IX;
port_index++) {
iobase = asc_ioport[port_index];
if (iobase) {
if (bus_space_map(iot, iobase, ASC_IOADR_GAP,
0, &ioh))
continue;
rv = AscFindSignature(iot, ioh);
if (rv) {
ia->ia_io[0].ir_addr = iobase;
break;
}
bus_space_unmap(iot, ioh, ASC_IOADR_GAP);
}
}
if (rv == 0)
return (0);
} else {
iobase = ia->ia_io[0].ir_addr;
if (bus_space_map(iot, iobase, ASC_IOADR_GAP, 0, &ioh))
return (0);
rv = AscFindSignature(iot, ioh);
if (rv == 0) {
bus_space_unmap(iot, ioh, ASC_IOADR_GAP);
return (0);
}
}
/* XXXJRT Probe routines should not have side-effects!! */
ASC_SET_CHIP_CONTROL(iot, ioh, ASC_CC_HALT);
ASC_SET_CHIP_STATUS(iot, ioh, 0);
irq = AscGetChipIRQ(iot, ioh, ASC_IS_ISA);
drq = AscGetIsaDmaChannel(iot, ioh);
/* Verify that the IRQ/DRQ match (or are wildcarded). */
if (ia->ia_irq[0].ir_irq != ISACF_IRQ_DEFAULT &&
ia->ia_irq[0].ir_irq != irq) {
rv = 0;
goto out;
}
if (ia->ia_drq[0].ir_drq != ISACF_DRQ_DEFAULT &&
ia->ia_drq[0].ir_drq != drq) {
rv = 0;
goto out;
}
ia->ia_nio = 1;
ia->ia_io[0].ir_addr = iobase;
ia->ia_io[0].ir_size = ASC_IOADR_GAP;
ia->ia_nirq = 1;
ia->ia_irq[0].ir_irq = irq;
ia->ia_ndrq = 1;
ia->ia_drq[0].ir_drq = drq;
ia->ia_niomem = 0;
out:
bus_space_unmap(iot, ioh, ASC_IOADR_GAP);
return rv;
}
void
adv_isa_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct isa_attach_args *ia = aux;
ASC_SOFTC *sc = (void *) self;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
isa_chipset_tag_t ic = ia->ia_ic;
int error;
printf("\n");
sc->sc_flags = 0x0;
if (bus_space_map(iot, ia->ia_io[0].ir_addr, ASC_IOADR_GAP, 0, &ioh)) {
printf("%s: can't map i/o space\n", sc->sc_dev.dv_xname);
return;
}
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = ia->ia_dmat;
sc->bus_type = ASC_IS_ISA;
sc->chip_version = ASC_GET_CHIP_VER_NO(iot, ioh);
/*
* Memo:
* for EISA cards:
* sc->chip_version = (ASC_CHIP_MIN_VER_EISA - 1) + ea->ea_pid[1];
*/
/*
* Initialize the board
*/
if (adv_init(sc)) {
printf("%s: adv_init failed\n", sc->sc_dev.dv_xname);
return;
}
if ((error = isa_dmacascade(ic, ia->ia_drq[0].ir_drq)) != 0) {
printf("%s: unable to cascade DRQ, error = %d\n",
sc->sc_dev.dv_xname, error);
return;
}
sc->sc_ih = isa_intr_establish(ic, ia->ia_irq[0].ir_irq, IST_EDGE,
IPL_BIO, adv_intr, sc);
if (sc->sc_ih == NULL) {
printf("%s: couldn't establish interrupt\n",
sc->sc_dev.dv_xname);
return;
}
adv_attach(sc);
}