257 lines
9.3 KiB
Plaintext
257 lines
9.3 KiB
Plaintext
# $NetBSD: NET4501,v 1.4 2002/03/04 13:24:10 sommerfeld Exp $
|
|
#
|
|
# NET4501 -- kernel configuration for a Soekris Engineering net4501
|
|
# single-board computer.
|
|
#
|
|
# http://www.soekris.com/
|
|
#
|
|
|
|
include "arch/i386/conf/std.i386"
|
|
|
|
#ident "NET4501-$Revision: 1.4 $"
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
# CPU support. At least one is REQUIRED.
|
|
#options I386_CPU
|
|
options I486_CPU
|
|
#options I586_CPU
|
|
#options I686_CPU
|
|
|
|
makeoptions COPTS="-Os -mcpu=i486"
|
|
options VNODE_OP_NOINLINE
|
|
|
|
# CPU-related options.
|
|
#options MATH_EMULATE # floating point emulation
|
|
#options VM86 # virtual 8086 emulation
|
|
#options USER_LDT # user-settable LDT; used by WINE
|
|
# eliminate delay no-ops in I/O; recommended on all but very old machines
|
|
options DUMMY_NOPS
|
|
|
|
#options MTRR # memory-type range register syscall support
|
|
|
|
# delay between "rebooting ..." message and hardware reset, in milliseconds
|
|
#options CPURESET_DELAY=2000
|
|
|
|
# This option allows you to force a serial console at the specified
|
|
# I/O address. see console(4) for details.
|
|
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
|
|
# you don't want the option below ON iff you are using the
|
|
# serial console option of the new boot strap code.
|
|
#options CONS_OVERRIDE # Always use above! independent of boot info
|
|
|
|
# The following options override the memory sizes passed in from the boot
|
|
# block. Use them *only* if the boot block is unable to determine the correct
|
|
# values. Note that the BIOS may *correctly* report less than 640k of base
|
|
# memory if the extended BIOS data area is located at the top of base memory
|
|
# (as is the case on most recent systems).
|
|
#options REALBASEMEM=639 # size of base memory (in KB)
|
|
#options REALEXTMEM=15360 # size of extended memory (in KB)
|
|
|
|
# Standard system options
|
|
|
|
options UCONSOLE # users can use TIOCCONS (for xconsole)
|
|
options INSECURE # disable kernel security levels
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
|
|
options LKM # loadable kernel modules
|
|
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Diagnostic/debugging support options
|
|
#options DIAGNOSTIC # expensive kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # in-kernel debugger
|
|
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
|
|
#options KGDB # remote debugger
|
|
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
# Compatibility options
|
|
options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
|
|
options COMPAT_09 # NetBSD 0.9,
|
|
options COMPAT_10 # NetBSD 1.0,
|
|
options COMPAT_11 # NetBSD 1.1,
|
|
options COMPAT_12 # NetBSD 1.2,
|
|
options COMPAT_13 # NetBSD 1.3,
|
|
options COMPAT_14 # NetBSD 1.4,
|
|
options COMPAT_15 # NetBSD 1.5,
|
|
options COMPAT_43 # and 4.3BSD
|
|
options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
#options COMPAT_SVR4 # binary compatibility with SVR4
|
|
#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
|
|
#options COMPAT_LINUX # binary compatibility with Linux
|
|
#options COMPAT_FREEBSD # binary compatibility with FreeBSD
|
|
#options COMPAT_MACH # binary compatibility with Mach binaries
|
|
#options EXEC_MACHO # exec MACH-O binaries
|
|
#options COMPAT_PECOFF # kernel support to run Win32 apps
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
#file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
#file-system NTFS # Windows/NT file system (experimental)
|
|
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
#file-system MSDOSFS # MS-DOS file system
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
#file-system NULLFS # loopback file system
|
|
#file-system OVERLAY # overlay file system
|
|
#file-system PORTAL # portal filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
#file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
|
|
# File system options
|
|
#options QUOTA # UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options SOFTDEP # FFS soft updates support.
|
|
#options NFSSERVER # Network File System server
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
options MROUTING # IP multicast routing
|
|
#options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
#options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
#options NETATALK # AppleTalk networking protocols
|
|
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
#options PPP_DEFLATE # Deflate compression support for PPP
|
|
#options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
#options IPFILTER_LOG # ipmon(8) log support
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
#options MIIVERBOSE # verbose PHY autoconfig messages
|
|
#options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
|
|
# Kernel root file system and dump configuration.
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on sd0a type ffs
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
|
|
# Basic Bus Support
|
|
|
|
# PCI bus support
|
|
pci* at mainbus? bus ?
|
|
pci* at pchb? bus ?
|
|
|
|
# Configure PCI using BIOS information
|
|
#options PCIBIOS # PCI BIOS support
|
|
#options PCIBIOSVERBOSE # PCI BIOS verbose info
|
|
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
|
|
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
|
|
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
|
|
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
|
|
#options PCIBIOS_INTR_GUESS # see pcibios(4)
|
|
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
|
|
|
|
# PCI bridges
|
|
pchb* at pci? dev ? function ? # PCI-Host bridges
|
|
|
|
# ISA bus support
|
|
isa0 at mainbus?
|
|
|
|
# Coprocessor Support
|
|
|
|
# Math Coprocessor support
|
|
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
|
|
|
|
# ISA serial interfaces
|
|
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
|
|
com1 at isa? port 0x2f8 irq 3
|
|
|
|
# IDE and related devices
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at wdc? channel ? drive ? flags 0x0000
|
|
|
|
# Network Interfaces
|
|
|
|
# PCI network interfaces
|
|
sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
|
|
|
|
# MII/PHY support
|
|
nsphyter* at mii? phy ? # NS83843 PHYs
|
|
|
|
# Pseudo-Devices
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter 16 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
#pseudo-device ppp 2 # Point-to-Point Protocol
|
|
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
#pseudo-device sl 2 # Serial Line IP
|
|
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device tb 1 # tablet line discipline
|
|
#pseudo-device sequencer 1 # MIDI sequencer
|
|
# rnd works; RND_COM does not on port i386 yet.
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|