NetBSD/sys/dev/pci/if_hme_pci.c

327 lines
9.4 KiB
C

/* $NetBSD: if_hme_pci.c,v 1.30 2009/05/17 01:33:25 tsutsui Exp $ */
/*
* Copyright (c) 2000 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* PCI front-end device driver for the HME ethernet device.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_hme_pci.c,v 1.30 2009/05/17 01:33:25 tsutsui Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/syslog.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <sys/intr.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/hmevar.h>
#ifdef __sparc__
#include <machine/promlib.h>
#endif
#ifndef HME_USE_LOCAL_MAC_ADDRESS
#ifdef __sparc__
#define HME_USE_LOCAL_MAC_ADDRESS 0 /* use system-wide address */
#else
#define HME_USE_LOCAL_MAC_ADDRESS 1
#endif
#endif
struct hme_pci_softc {
struct hme_softc hsc_hme; /* HME device */
bus_space_tag_t hsc_memt;
bus_space_handle_t hsc_memh;
void *hsc_ih;
};
int hmematch_pci(device_t, cfdata_t, void *);
void hmeattach_pci(device_t, device_t, void *);
CFATTACH_DECL_NEW(hme_pci, sizeof(struct hme_pci_softc),
hmematch_pci, hmeattach_pci, NULL, NULL);
int
hmematch_pci(device_t parent, cfdata_t cf, void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SUN &&
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SUN_HMENETWORK)
return (1);
return (0);
}
#if HME_USE_LOCAL_MAC_ADDRESS
static inline int
hmepromvalid(uint8_t* buf)
{
return buf[0] == 0x18 && buf[1] == 0x00 && /* structure length */
buf[2] == 0x00 && /* revision */
(buf[3] == 0x00 || /* hme */
buf[3] == 0x80) && /* qfe */
buf[4] == PCI_SUBCLASS_NETWORK_ETHERNET && /* subclass code */
buf[5] == PCI_CLASS_NETWORK; /* class code */
}
static inline int
hmevpdoff(bus_space_tag_t romt, bus_space_handle_t romh, int vpdoff, int dev)
{
#define VPDLEN (3 + sizeof(struct pci_vpd) + ETHER_ADDR_LEN)
if (bus_space_read_1(romt, romh, vpdoff + VPDLEN) != 0x79 &&
bus_space_read_1(romt, romh, vpdoff + 4 * VPDLEN) == 0x79) {
/*
* Use the Nth NA for the Nth HME on
* this SUNW,qfe.
*/
vpdoff += dev * VPDLEN;
}
return vpdoff;
}
#endif
void
hmeattach_pci(device_t parent, device_t self, void *aux)
{
struct pci_attach_args *pa = aux;
struct hme_pci_softc *hsc = device_private(self);
struct hme_softc *sc = &hsc->hsc_hme;
pci_intr_handle_t ih;
pcireg_t csr;
const char *intrstr;
int type;
#if HME_USE_LOCAL_MAC_ADDRESS
struct pci_attach_args ebus_pa;
pcireg_t ebus_cl, ebus_id;
uint8_t *enaddr;
bus_space_tag_t romt;
bus_space_handle_t romh;
bus_size_t romsize;
uint8_t buf[64];
int dataoff, vpdoff;
struct pci_vpd *vpd;
static const uint8_t promhdr[] = { 0x55, 0xaa };
#define PROMHDR_PTR_DATA 0x18
static const uint8_t promdat[] = {
0x50, 0x43, 0x49, 0x52, /* "PCIR" */
PCI_VENDOR_SUN & 0xff, PCI_VENDOR_SUN >> 8,
PCI_PRODUCT_SUN_HMENETWORK & 0xff,
PCI_PRODUCT_SUN_HMENETWORK >> 8
};
#define PROMDATA_PTR_VPD 0x08
#define PROMDATA_DATA2 0x0a
#endif /* HME_USE_LOCAL_MAC_ADDRESS */
sc->sc_dev = self;
aprint_normal(": Sun Happy Meal Ethernet, rev. %d\n",
PCI_REVISION(pa->pa_class));
/*
* enable io/memory-space accesses. this is kinda of gross; but
# the hme comes up with neither IO space enabled, or memory space.
*/
if (pa->pa_memt)
pa->pa_flags |= PCI_FLAGS_MEM_ENABLED;
if (pa->pa_iot)
pa->pa_flags |= PCI_FLAGS_IO_ENABLED;
csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
if (pa->pa_memt) {
type = PCI_MAPREG_TYPE_MEM;
csr |= PCI_COMMAND_MEM_ENABLE;
sc->sc_bustag = pa->pa_memt;
} else {
type = PCI_MAPREG_TYPE_IO;
csr |= PCI_COMMAND_IO_ENABLE;
sc->sc_bustag = pa->pa_iot;
}
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
csr | PCI_COMMAND_MEM_ENABLE);
sc->sc_dmatag = pa->pa_dmat;
sc->sc_pci = 1; /* XXXXX should all be done in bus_dma. */
/*
* Map five register banks:
*
* bank 0: HME SEB registers: +0x0000
* bank 1: HME ETX registers: +0x2000
* bank 2: HME ERX registers: +0x4000
* bank 3: HME MAC registers: +0x6000
* bank 4: HME MIF registers: +0x7000
*
*/
#define PCI_HME_BASEADDR 0x10
if (pci_mapreg_map(pa, PCI_HME_BASEADDR, type, 0,
&hsc->hsc_memt, &hsc->hsc_memh, NULL, NULL) != 0) {
aprint_error_dev(self, "unable to map device registers\n");
return;
}
sc->sc_seb = hsc->hsc_memh;
if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x2000,
0x1000, &sc->sc_etx)) {
aprint_error_dev(self, "unable to subregion ETX registers\n");
return;
}
if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x4000,
0x1000, &sc->sc_erx)) {
aprint_error_dev(self, "unable to subregion ERX registers\n");
return;
}
if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x6000,
0x1000, &sc->sc_mac)) {
aprint_error_dev(self, "unable to subregion MAC registers\n");
return;
}
if (bus_space_subregion(hsc->hsc_memt, hsc->hsc_memh, 0x7000,
0x1000, &sc->sc_mif)) {
aprint_error_dev(self, "unable to subregion MIF registers\n");
return;
}
#if HME_USE_LOCAL_MAC_ADDRESS
/*
* Dig out VPD (vital product data) and acquire Ethernet address.
* The VPD of hme resides in the Boot PROM (PCI FCode) attached
* to the EBus interface.
*/
/*
* ``Writing FCode 3.x Programs'' (newer ones, dated 1997 and later)
* chapter 2 describes the data structure.
*/
enaddr = NULL;
/* get a PCI tag for the EBus bridge (function 0 of the same device) */
ebus_pa = *pa;
ebus_pa.pa_tag = pci_make_tag(pa->pa_pc, pa->pa_bus, pa->pa_device, 0);
ebus_cl = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_CLASS_REG);
ebus_id = pci_conf_read(ebus_pa.pa_pc, ebus_pa.pa_tag, PCI_ID_REG);
#define PCI_EBUS2_BOOTROM 0x10
if (PCI_CLASS(ebus_cl) == PCI_CLASS_BRIDGE &&
PCI_PRODUCT(ebus_id) == PCI_PRODUCT_SUN_EBUS &&
pci_mapreg_map(&ebus_pa, PCI_EBUS2_BOOTROM, PCI_MAPREG_TYPE_MEM,
BUS_SPACE_MAP_CACHEABLE | BUS_SPACE_MAP_PREFETCHABLE,
&romt, &romh, 0, &romsize) == 0) {
/* read PCI Expansion PROM Header */
bus_space_read_region_1(romt, romh, 0, buf, sizeof buf);
if (memcmp(buf, promhdr, sizeof promhdr) == 0 &&
(dataoff = (buf[PROMHDR_PTR_DATA] |
(buf[PROMHDR_PTR_DATA + 1] << 8))) >= 0x1c) {
/* read PCI Expansion PROM Data */
bus_space_read_region_1(romt, romh, dataoff,
buf, sizeof buf);
if (memcmp(buf, promdat, sizeof promdat) == 0 &&
hmepromvalid(buf + PROMDATA_DATA2) &&
(vpdoff = (buf[PROMDATA_PTR_VPD] |
(buf[PROMDATA_PTR_VPD + 1] << 8))) >= 0x1c) {
/*
* The VPD of hme is not in PCI 2.2 standard
* format. The length in the resource header
* is in big endian, and resources are not
* properly terminated (only one resource
* and no end tag).
*/
vpdoff = hmevpdoff(romt, romh, vpdoff,
pa->pa_device);
/* read PCI VPD */
bus_space_read_region_1(romt, romh,
vpdoff, buf, sizeof buf);
vpd = (void *)(buf + 3);
if (PCI_VPDRES_ISLARGE(buf[0]) &&
PCI_VPDRES_LARGE_NAME(buf[0])
== PCI_VPDRES_TYPE_VPD &&
/* buf[1] == 0 && buf[2] == 9 && */ /*len*/
vpd->vpd_key0 == 0x4e /* N */ &&
vpd->vpd_key1 == 0x41 /* A */ &&
vpd->vpd_len == ETHER_ADDR_LEN) {
/*
* Ethernet address found
*/
enaddr = buf + 6;
}
}
}
bus_space_unmap(romt, romh, romsize);
}
if (enaddr)
memcpy(sc->sc_enaddr, enaddr, ETHER_ADDR_LEN);
else
#endif /* HME_USE_LOCAL_MAC_ADDRESS */
#ifdef __sparc__
prom_getether(PCITAG_NODE(pa->pa_tag), sc->sc_enaddr);
#else
printf("%s: no Ethernet address found\n", device_xname(self));
#endif
/*
* Map and establish our interrupt.
*/
if (pci_intr_map(pa, &ih) != 0) {
aprint_error_dev(self, "unable to map interrupt\n");
return;
}
intrstr = pci_intr_string(pa->pa_pc, ih);
hsc->hsc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, hme_intr, sc);
if (hsc->hsc_ih == NULL) {
aprint_error_dev(self, "unable to establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
return;
}
aprint_normal_dev(self, "interrupting at %s\n", intrstr);
sc->sc_burst = 16; /* XXX */
/* Finish off the attach. */
hme_config(sc);
}