210 lines
8.6 KiB
C
210 lines
8.6 KiB
C
/* $NetBSD: ka43.h,v 1.1 1996/07/20 17:58:16 ragge Exp $ */
|
|
/*
|
|
* Copyright (c) 1996 Ludd, University of Lule}, Sweden.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Ludd by Bertram Barth.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed at Ludd, University of
|
|
* Lule}, Sweden and its contributors.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Definitions for I/O addresses of
|
|
*
|
|
* VAXstation 3100 model 76 (RigelMAX)
|
|
*/
|
|
|
|
#define KA43_SIDEX 0x20040004 /* SID extension register */
|
|
|
|
#define KA43_CFGTST 0x20020000 /* Configuration and Test register */
|
|
#define KA43_IORESET 0x20020000 /* I/O Reset register */
|
|
|
|
#define KA43_ROMGETC 0x20040044
|
|
#define KA43_ROMPUTC 0x20040058
|
|
#define KA43_ROMPUTS 0x2004004C
|
|
|
|
#define KA43_CH2_BASE 0x10000000 /* 2nd level cache data area */
|
|
#define KA43_CH2_END 0x1FFFFFFF
|
|
#define KA43_CH2_SIZE 0x10000000
|
|
#define KA43_CT2_BASE 0x21000000 /* 2nd level cache tag area */
|
|
#define KA43_CT2_END 0x2101FFFF
|
|
#define KA43_CT2_SIZE 0x20000
|
|
#define KA43_CH2_CREG 0x21100000 /* 2nd level cache control register */
|
|
#define KA43_SESR 0x21100000 /* ??? */
|
|
|
|
#define KA43_ROM_BASE 0x20040000 /* System module ROM */
|
|
#define KA43_ROM_END 0x2007FFFF
|
|
#define KA43_ROM_SIZE 0x40000 /* ??? */
|
|
|
|
#define KA43_IVN_BASE 0x20040020 /* Interrupt Vector Numbers */
|
|
#define KA43_IVN_END 0x2004003F
|
|
#define KA43_IVN_SIZE 0x20
|
|
|
|
#define KA43_HLTCOD 0x20080000 /* Halt Code Register */
|
|
#define KA43_MSER 0x20080004 /* Memory System Error register */
|
|
#define KA43_MEAR 0x20080008 /* Memory Error Address register */
|
|
#define KA43_INTMSK 0x2008000C /* Interrupt Mask register */
|
|
#define KA43_VDCORG 0x2008000D /* Video Controller Origin Register */
|
|
#define KA43_VDCSEL 0x2008000E /* Video Controller Select Register */
|
|
#define KA43_INTREQ 0x2008000F /* Interrupt Request register */
|
|
#define KA43_INTCLR 0x2008000F /* Interrupt Request clear register */
|
|
#define KA43_DIAGDSP 0x20080010
|
|
#define KA43_PARCTL 0x20080014 /* Parity Control Register */
|
|
#define KA43_DIAGTME 0x2008001E
|
|
|
|
#define KA43_PCTL_DPEN 0x00000001 /* DMA parity enable (bit 0) */
|
|
#define KA43_PCTL_CPEN 0x00000002 /* CPU Parity enable (bit 1) */
|
|
#define KA43_PCTL_DMA 0x01000000 /* LANCE DMA control (bit 24) */
|
|
|
|
#define KA43_SESR_CENB 0x00000001
|
|
#define KA43_SESR_SERR 0x00000002
|
|
#define KA43_SESR_LERR 0x00000004
|
|
#define KA43_SESR_CERR 0x00000008
|
|
#define KA43_SESR_DIRTY 0x00000010
|
|
#define KA43_SESR_MISS 0x00000020
|
|
#define KA43_SESR_DPE 0x00000040
|
|
#define KA43_SESR_TPE 0x00000080
|
|
#define KA43_SESR_WSB 0x00010000
|
|
#define KA43_SESR_CIEA 0x7FFC0000
|
|
|
|
#define KA43_PCS_FORCEHIT (1<<0) /* Force hit */
|
|
#define KA43_PCS_ENABLE (1<<1) /* Enable primary cache */
|
|
#define KA43_PCS_FLUSH (1<<2) /* Flush cache */
|
|
#define KA43_PCS_REFRESH (1<<3) /* Enable refresh */
|
|
#define KA43_PCS_HIT (1<<4) /* Cache hit */
|
|
#define KA43_PCS_INTERRUPT (1<<5) /* Interrupt pending */
|
|
#define KA43_PCS_TRAP2 (1<<6) /* Trap while trap */
|
|
#define KA43_PCS_TRAP1 (1<<7) /* Micro trap / machine check */
|
|
#define KA43_PCS_TPERR (1<<8) /* Tag parity error */
|
|
#define KA43_PCS_DPERR (1<<9) /* Dal data parity error */
|
|
#define KA43_PCS_PPERR (1<<10) /* P data parity error */
|
|
#define KA43_PCS_BUSERR (1<<11) /* Bus error */
|
|
#define KA43_PCS_BCHIT (1<<12) /* B cache hit */
|
|
|
|
/*
|
|
* Other fixed addresses which should be mapped
|
|
*/
|
|
#define KA43_CPU_BASE 0x20080000 /* so called "CPU registers" */
|
|
#define KA43_CPU_END 0x200800FF
|
|
#define KA43_CPU_SIZE 0x100
|
|
#define KA43_NWA_BASE 0x20090000 /* Network Address ROM */
|
|
#define KA43_NWA_END 0x2009007F
|
|
#define KA43_NWA_SIZE 0x80
|
|
#define KA43_SER_BASE 0x200A0000 /* Serial line controller */
|
|
#define KA43_SER_END 0x200A000F
|
|
#define KA43_SER_SIZE 0x10
|
|
#define KA43_WAT_BASE 0x200B0000 /* TOY clock and NV-RAM */
|
|
#define KA43_WAT_END 0x200B00FF
|
|
#define KA43_WAT_SIZE 0x100
|
|
#define KA43_SC1_BASE 0x200C0080 /* 1st SCSI Controller Chip */
|
|
#define KA43_SC1_END 0x200C009F
|
|
#define KA43_SC1_SIZE 0x20
|
|
#define KA43_SC2_BASE 0x200C0180 /* 2nd SCSI Controller Chip */
|
|
#define KA43_SC2_END 0x200C019F
|
|
#define KA43_SC2_SIZE 0x20
|
|
#define KA43_SCS_BASE 0x200C0000 /* area occupied by SCSI 1+2 */
|
|
#define KA43_SCS_END 0x200C01FF
|
|
#define KA43_SCS_SIZE 0x200
|
|
#define KA43_LAN_BASE 0x200E0000 /* LANCE chip registers */
|
|
#define KA43_LAN_END 0x200E0007
|
|
#define KA43_LAN_SIZE 0x08
|
|
#define KA43_CUR_BASE 0x200F0000 /* Monochrome video cursor chip */
|
|
#define KA43_CUR_END 0x200F003C
|
|
#define KA43_CUR_SIZE 0x40
|
|
#define KA43_DMA_BASE 0x202D0000 /* 128KB Data Buffer */
|
|
#define KA43_DMA_END 0x202EFFFF
|
|
#define KA43_DMA_SIZE 0x20000
|
|
#define KA43_VME_BASE 0x30000000
|
|
#define KA43_VME_END 0x3003FFFF
|
|
#define KA43_VME_SIZE 0x40000
|
|
|
|
#define KA43_SC1_DADR 0x200C00A0 /* (1st SCSI) DMA address register */
|
|
#define KA43_SC1_DCNT 0x200C00C0 /* (1st SCSI) DMA byte count reg. */
|
|
#define KA43_SC1_DDIR 0x200C00C4 /* (1st SCSI) DMA transfer direction */
|
|
#define KA43_SC2_DADR 0x200C01A0
|
|
#define KA43_SC2_DCNT 0x200C01C0
|
|
#define KA43_SC2_DDIR 0x200C01C4
|
|
|
|
#define KA43_CUR_CMD 0x200F0000 /* Cursor Command Register */
|
|
#define KA43_CUR_XPOS 0x200F0004 /* Cursor X position */
|
|
#define KA43_CUR_YPOS 0x200F0008 /* Cursor Y position */
|
|
|
|
#define KA43_CUR_XMIN1 0x200F000C /* Region 1 left edge */
|
|
#define KA43_CUR_XMAX1 0x200F0010 /* Region 1 right edge */
|
|
#define KA43_CUR_YMIN1 0x200F0014 /* Region 1 top edge */
|
|
#define KA43_CUR_YMAX1 0x200F0018 /* Region 1 bottom edge */
|
|
|
|
#define KA43_CUR_XMIN2 0x200F002C /* Region 2 left edge */
|
|
#define KA43_CUR_XMAX2 0x200F0030 /* Region 2 right edge */
|
|
#define KA43_CUR_YMIN2 0x200F0034 /* Region 2 top edge */
|
|
#define KA43_CUR_YMAX2 0x200F0038 /* Region 2 bottom edge */
|
|
|
|
/*
|
|
* Clock-Chip data in NVRAM
|
|
*/
|
|
#define KA43_CPMBX 0x200B0038 /* Console Mailbox (1 byte) */
|
|
#define KA43_CPFLG 0x200B003C /* Console Program Flags (1 byte) */
|
|
#define KA43_LK201_ID 0x200B0040 /* Keyboard Variation (1 byte) */
|
|
#define KA43_CONS_ID 0x200B0044 /* Console Device Type (1 byte) */
|
|
#define KA43_SCR 0x200B0048 /* Console Scratch RAM */
|
|
#define KA43_TEMP 0x200B0058 /* Used by System Firmware */
|
|
#define KA43_BAT_CHK 0x200B0088 /* Battery Check Data */
|
|
#define KA43_PASSWD 0x200B0098 /* ??? */
|
|
#define KA43_BOOTFLG 0x200B00A8 /* Default Boot Flags (4 bytes) */
|
|
#define KA43_SCRLEN 0x200B00B8 /* Number of pages of SCR (1 byte) */
|
|
#define KA43_SCSIPORT 0x200B00BC /* Tape Controller Port Data */
|
|
#define KA43_RESERVED 0x200B00C0 /* Reserved (16 bytes) */
|
|
|
|
struct ka43_cpu {
|
|
u_long ka43_hltcod;
|
|
u_long ka43_mser;
|
|
u_long ka43_cear;
|
|
u_long ka43_intmsk;
|
|
};
|
|
|
|
struct ka43_clock {
|
|
u_long :2; u_long sec :8; u_long :22;
|
|
u_long :2; u_long secalrm :8; u_long :22;
|
|
u_long :2; u_long min :8; u_long :22;
|
|
u_long :2; u_long minalrm :8; u_long :22;
|
|
u_long :2; u_long hr :8; u_long :22;
|
|
u_long :2; u_long hralrm :8; u_long :22;
|
|
u_long :2; u_long dayofwk :8; u_long :22;
|
|
u_long :2; u_long day :8; u_long :22;
|
|
u_long :2; u_long mon :8; u_long :22;
|
|
u_long :2; u_long yr :8; u_long :22;
|
|
u_long :2; u_long csr0 :8; u_long :22;
|
|
u_long :2; u_long csr1 :8; u_long :22;
|
|
u_long :2; u_long csr2 :8; u_long :22;
|
|
u_long :2; u_long csr3 :8; u_long :22;
|
|
u_long :2; u_long cpmbx :8; u_long :22;
|
|
};
|
|
|
|
int ka43_setup __P((struct uvax_calls *p, int flags));
|
|
static int ka43_clkread __P((time_t));
|
|
static void ka43_clkwrite __P((void));
|