NetBSD/sys/arch/bebox/conf/GENERIC

161 lines
4.2 KiB
Plaintext

# $NetBSD: GENERIC,v 1.25 2000/02/29 06:32:24 simonb Exp $
#
# First try for BEBOX config file
#
include "arch/bebox/conf/std.bebox"
#ident "GENERIC-$Revision: 1.25 $"
maxusers 32
#options IPKDBUSERHACK # Allow access to mapped memory via kgdb
#options DEBUG_BY_TOOLS # Allow debugging from toolsnet
# HMAC key to be used for debugging sessions
#options IPKDBKEY="\"HMAC pass phrase text\""
#options IPKDBSECURE # Allow debugging even when securelevel > 0
makeoptions DEBUG="-g"
options DEBUG
options DIAGNOSTIC
options TRAP_PANICWAIT
options DDB
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
options KTRACE
options TCP_COMPAT_42
options COMPAT_43
options COMPAT_09
options COMPAT_10
options COMPAT_12
options COMPAT_13
options COMPAT_14
options COMPAT_386BSD_MBRPART # recognize old partition ID
file-system FFS
file-system MFS
file-system NFS
file-system CD9660
file-system MSDOSFS
file-system FDESC
file-system KERNFS
file-system NULLFS
file-system OVERLAY
file-system PORTAL
file-system PROCFS
file-system UMAPFS
file-system UNION
#options FFS_EI # FFS Endian Independant support
#options SOFTDEP # FFS soft updates support.
#options NFSSERVER
# Pull in config fragments for kernel crypto. This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.
#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix
#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix
options INET
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
options NFS_BOOT_BOOTPARAM,NFS_BOOT_BOOTP
config netbsd root on ? type ?
pseudo-device vnd 4
pseudo-device loop
pseudo-device bpfilter 8 # packet filter
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
pseudo-device pty 64
#pseudo-device raid 4 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components
#pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device wsmux 2
#
# device
#
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options PCIVERBOSE # verbose PCI device messages
mainbus0 at root
pci0 at mainbus0 bus ?
ppb* at pci? dev ? function ? # PCI-PCI bridges
pci* at ppb? bus ?
pchb* at pci? dev ? function ? # PCI-Host bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
isa* at pcib? # ISA on PCI-ISA bridge
#pc0 at isa? port 0x60 irq 1 # generic PC console device
com0 at isa? port 0x3f8 irq 4 # standard PC serial ports
com1 at isa? port 0x2f8 irq 3
#com2 at isa? port 0x380 irq 16
#com3 at isa? port 0x388 irq 17
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
#lpt1 at isa? port 0x278
#lpt2 at isa? port 0x3bc
#lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#lms1 at isa? port 0x238 irq 5
#mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#mms1 at isa? port 0x238 irq 5
#pms0 at pckbd? irq 12 # PS/2 auxiliary port mouse
pckbc0 at isa?
pckbd* at pckbc?
#pms* at pckbc?
#vga0 at isa?
vga* at pci?
pfb* at pci?
wsdisplay* at vga? console ?
wsdisplay* at pfb? console ?
wskbd* at pckbd? console ?
#wsmouse* at pms? mux 0
#ncr* at pci? dev ? function ? # NCR 538XX SCSI controllers
#scsibus* at ncr?
#sd* at scsibus? target ? lun ? # SCSI disk drives
#st* at scsibus? target ? lun ? # SCSI tape drives
#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
#ch* at scsibus? target ? lun ? # SCSI autochangers
#ss* at scsibus? target ? lun ? # SCSI scanners
#uk* at scsibus? target ? lun ? # SCSI unknown
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd0 at fdc? drive 1
#fd* at fdc? drive ?
wdc0 at isa? port 0x1f0 irq 14 # ST506, ESDI, and IDE controllers
wd* at wdc? drive ?
ne0 at isa? port 0x300 irq 5 # NE[12]000 ethernet cards
#ipkdbif0 at ne?
#wss0 at isa? port 0x530 irq 10 drq 0 # Windows Sound System
#pcppi0 at isa?
#spkr0 at pcppi?
# Joystick driver. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201