NetBSD/sys/dev/isa/if_cs_isa.c

289 lines
7.2 KiB
C

/* $NetBSD: if_cs_isa.c,v 1.16 2005/12/11 12:22:02 christos Exp $ */
/*
* Copyright 1997
* Digital Equipment Corporation. All rights reserved.
*
* This software is furnished under license and may be used and
* copied only in accordance with the following terms and conditions.
* Subject to these conditions, you may download, copy, install,
* use, modify and distribute this software in source and/or binary
* form. No title or ownership is transferred hereby.
*
* 1) Any source code used, modified or distributed must reproduce
* and retain this copyright notice and list of conditions as
* they appear in the source file.
*
* 2) No right is granted to use any trade name, trademark, or logo of
* Digital Equipment Corporation. Neither the "Digital Equipment
* Corporation" name nor any trademark or logo of Digital Equipment
* Corporation may be used to endorse or promote products derived
* from this software without the prior written permission of
* Digital Equipment Corporation.
*
* 3) This software is provided "AS-IS" and any express or implied
* warranties, including but not limited to, any implied warranties
* of merchantability, fitness for a particular purpose, or
* non-infringement are disclaimed. In no event shall DIGITAL be
* liable for any damages whatsoever, and in particular, DIGITAL
* shall not be liable for special, indirect, consequential, or
* incidental damages or damages for lost profits, loss of
* revenue or loss of use, whether such damages arise in contract,
* negligence, tort, under statute, in equity, at law or otherwise,
* even if advised of the possibility of such damage.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_cs_isa.c,v 1.16 2005/12/11 12:22:02 christos Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/device.h>
#include "rnd.h"
#if NRND > 0
#include <sys/rnd.h>
#endif
#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/isa/isareg.h>
#include <dev/isa/isavar.h>
#include <dev/isa/isadmavar.h>
#include <dev/ic/cs89x0reg.h>
#include <dev/ic/cs89x0var.h>
#include <dev/isa/cs89x0isavar.h>
int cs_isa_probe(struct device *, struct cfdata *, void *);
void cs_isa_attach(struct device *, struct device *, void *);
CFATTACH_DECL(cs_isa, sizeof(struct cs_softc),
cs_isa_probe, cs_isa_attach, NULL, NULL);
int
cs_isa_probe(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_tag_t memt = ia->ia_memt;
bus_space_handle_t ioh, memh;
struct cs_softc sc;
int rv = 0, have_io = 0, have_mem = 0;
u_int16_t isa_cfg, isa_membase;
int maddr, irq;
if (ia->ia_nio < 1)
return (0);
if (ia->ia_nirq < 1)
return (0);
if (ISA_DIRECT_CONFIG(ia))
return (0);
/*
* Disallow wildcarded I/O base.
*/
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
return (0);
if (ia->ia_niomem > 0)
maddr = ia->ia_iomem[0].ir_addr;
else
maddr = ISA_UNKNOWN_IOMEM;
/*
* Map the I/O space.
*/
if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, CS8900_IOSIZE,
0, &ioh))
goto out;
have_io = 1;
memset(&sc, 0, sizeof sc);
sc.sc_iot = iot;
sc.sc_ioh = ioh;
/* Verify that it's a Crystal product. */
if (CS_READ_PACKET_PAGE_IO(&sc, PKTPG_EISA_NUM) !=
EISA_NUM_CRYSTAL)
goto out;
/*
* Verify that it's a supported chip.
*/
switch (CS_READ_PACKET_PAGE_IO(&sc, PKTPG_PRODUCT_ID) &
PROD_ID_MASK) {
case PROD_ID_CS8900:
#ifdef notyet
case PROD_ID_CS8920:
case PROD_ID_CS8920M:
#endif
break;
default:
/* invalid product ID */
goto out;
}
/*
* If the IRQ or memory address were not specified, read the
* ISA_CFG EEPROM location.
*/
if (maddr == ISA_UNKNOWN_IOMEM ||
ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ) {
if (cs_verify_eeprom(&sc) == CS_ERROR) {
printf("cs_isa_probe: EEPROM bad or missing\n");
goto out;
}
if (cs_read_eeprom(&sc, EEPROM_ISA_CFG, &isa_cfg)
== CS_ERROR) {
printf("cs_isa_probe: unable to read ISA_CFG\n");
goto out;
}
}
/*
* If the IRQ wasn't specified, get it from the EEPROM.
*/
if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ) {
irq = isa_cfg & ISA_CFG_IRQ_MASK;
if (irq == 3)
irq = 5;
else
irq += 10;
} else
irq = ia->ia_irq[0].ir_irq;
/*
* If the memory address wasn't specified, get it from the EEPROM.
*/
if (maddr == ISA_UNKNOWN_IOMEM) {
if ((isa_cfg & ISA_CFG_MEM_MODE) == 0) {
/* EEPROM says don't use memory mode. */
goto out;
}
if (cs_read_eeprom(&sc, EEPROM_MEM_BASE, &isa_membase)
== CS_ERROR) {
printf("cs_isa_probe: unable to read MEM_BASE\n");
goto out;
}
isa_membase &= MEM_BASE_MASK;
maddr = (int)isa_membase << 8;
}
/*
* We now have a valid mem address; attempt to map it.
*/
if (bus_space_map(ia->ia_memt, maddr, CS8900_MEMSIZE, 0, &memh)) {
/* Can't map it; fall back on i/o-only mode. */
printf("cs_isa_probe: unable to map memory space\n");
maddr = ISA_UNKNOWN_IOMEM;
} else
have_mem = 1;
ia->ia_nio = 1;
ia->ia_io[0].ir_size = CS8900_IOSIZE;
if (maddr == ISA_UNKNOWN_IOMEM)
ia->ia_niomem = 0;
else {
ia->ia_niomem = 1;
ia->ia_iomem[0].ir_addr = maddr;
ia->ia_iomem[0].ir_size = CS8900_MEMSIZE;
}
ia->ia_nirq = 1;
ia->ia_irq[0].ir_irq = irq;
rv = 1;
out:
if (have_io)
bus_space_unmap(iot, ioh, CS8900_IOSIZE);
if (have_mem)
bus_space_unmap(memt, memh, CS8900_MEMSIZE);
return (rv);
}
void
cs_isa_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct cs_softc *sc = (struct cs_softc *) self;
struct cs_softc_isa *isc = (void *) self;
struct isa_attach_args *ia = aux;
isc->sc_ic = ia->ia_ic;
sc->sc_iot = ia->ia_iot;
sc->sc_memt = ia->ia_memt;
if (ia->ia_ndrq > 0)
isc->sc_drq = ia->ia_drq[0].ir_drq;
else
isc->sc_drq = -1;
sc->sc_irq = ia->ia_irq[0].ir_irq;
printf("\n");
/*
* Map the device.
*/
if (bus_space_map(sc->sc_iot, ia->ia_io[0].ir_addr, CS8900_IOSIZE,
0, &sc->sc_ioh)) {
printf("%s: unable to map i/o space\n", sc->sc_dev.dv_xname);
return;
}
/*
* Validate IRQ.
*/
if (CS8900_IRQ_ISVALID(sc->sc_irq) == 0) {
printf("%s: invalid IRQ %d\n", sc->sc_dev.dv_xname, sc->sc_irq);
return;
}
/*
* Map the memory space if it was specified. If we can do this,
* we set ourselves up to use memory mode forever. Otherwise,
* we fall back on I/O mode.
*/
if (ia->ia_iomem[0].ir_addr != ISA_UNKNOWN_IOMEM &&
ia->ia_iomem[0].ir_size == CS8900_MEMSIZE &&
CS8900_MEMBASE_ISVALID(ia->ia_iomem[0].ir_addr)) {
if (bus_space_map(sc->sc_memt, ia->ia_iomem[0].ir_addr,
CS8900_MEMSIZE, 0, &sc->sc_memh)) {
printf("%s: unable to map memory space\n",
sc->sc_dev.dv_xname);
} else {
sc->sc_cfgflags |= CFGFLG_MEM_MODE;
sc->sc_pktpgaddr = ia->ia_iomem[0].ir_addr;
}
}
sc->sc_ih = isa_intr_establish(ia->ia_ic, sc->sc_irq, IST_EDGE,
IPL_NET, cs_intr, sc);
if (sc->sc_ih == NULL) {
printf("%s: unable to establish interrupt\n",
sc->sc_dev.dv_xname);
return;
}
sc->sc_dma_chipinit = cs_isa_dma_chipinit;
sc->sc_dma_attach = cs_isa_dma_attach;
sc->sc_dma_process_rx = cs_process_rx_dma;
cs_attach(sc, NULL, NULL, 0, 0);
}