91 lines
2.9 KiB
Plaintext
91 lines
2.9 KiB
Plaintext
.\"
|
|
.\" 5799-WZQ (C) COPYRIGHT IBM CORPORATION 1986,1987,1988
|
|
.\" LICENSED MATERIALS - PROPERTY OF IBM
|
|
.\" REFER TO COPYRIGHT INSTRUCTIONS FORM NUMBER G120-2083
|
|
.\"
|
|
.\"WISC: Header:rvd.4p_ca 11.0$
|
|
.\"WISC: ACIS:rvd.4p_ca 11.0$
|
|
.\"WISC: Source: /ibm/acis/usr/man/man4/RCS/rvd.4p_ca,v $
|
|
.\"This file contains -man macros.
|
|
.TH RVD 4P "July 1987" "Space overwritten by .AC macro" " "
|
|
.AC 1 0
|
|
.SH NAME
|
|
rvd \- Remote Virtual Disk protocol
|
|
.SH DESCRIPTION
|
|
RVD
|
|
is a network service which allows several
|
|
physical machines to share one
|
|
physical mass storage device such as a hard disk. The basic
|
|
concept is to have the machine to which the device is physically attached
|
|
act as a server to read and write blocks for all the other
|
|
machines desiring use of the resource.
|
|
.PP
|
|
The server program apportions the
|
|
physical blocks into \*(lqvirtual disk packs\*(rq based on a
|
|
table maintained with
|
|
.IR vddb (8).
|
|
The packs can then be used separately by clients. There are
|
|
three modes of use: read-only, shared, and exclusive.
|
|
Exclusive mode is used for
|
|
read-write access, while read-only mode is as it sounds.
|
|
Shared mode is not supported under IBM/4.3.
|
|
If a disk pack is \*(lqspun up\*(rq in read-only mode,
|
|
several clients may share the pack and read its information. In
|
|
exclusive mode, one client has exclusive use of the disk pack.
|
|
.PP
|
|
Packs are \*(lqspun up\*(rq and \*(lqspun down\*(rq with the
|
|
.I up
|
|
and
|
|
.I down
|
|
commands (see
|
|
.IR up (1)).
|
|
This can be done
|
|
at reboot time within
|
|
.I /etc/rc.local
|
|
(see
|
|
.IR rc (8))
|
|
or
|
|
at login time within
|
|
.I ~/.login
|
|
(see
|
|
.IR csh (1)).
|
|
Once a pack is spun up, it behaves like a disk physically attached to
|
|
the local machine (excepting network latency).
|
|
The client can do anything desired with the pack;
|
|
both MS-DOS and UNIX operating system file systems have
|
|
been used on the same physical
|
|
drive at the same time (on separate packs, of course).
|
|
.PP
|
|
RVD
|
|
is implemented in two parts: server code and client code. The server
|
|
code is written as a
|
|
.IR "user process" ,
|
|
i.e. it does not require any special
|
|
privileges beyond read/write access to the disks it manages. The server
|
|
opens a network socket and listens for UDP connections. It also accepts
|
|
all
|
|
RVD
|
|
packets and acts on them.
|
|
RVD is a protocol different from both
|
|
UDP and TCP,
|
|
although similar in nature to the former.
|
|
.PP
|
|
The client code is implemented as a pseudo-device and corresponding
|
|
device driver in the kernel. It can handle up to 10
|
|
remote virtual disks
|
|
simultaneously, which are associated with the pseudo-devices below.
|
|
.SH FILES
|
|
.DT
|
|
/dev/vd[0-9]a block special file pseudo-device
|
|
.br
|
|
/dev/rvd[0-9]a character special file pseudo-device
|
|
.SH "SEE ALSO"
|
|
up(1), rvddb(5), rvdtab(5),
|
|
rvdflush(8), rvdchlog(8), rvddown(8),
|
|
rvdexch(8), rvdflush(8), rvdlog(8), rvdsend(8), rvdshow(8),
|
|
rvdshut(8), rvdsrv(8), savervd(8),
|
|
spinup(8), vddb(8), vdstats(8)
|
|
.br
|
|
``The Remote Virtual Disk System'' in Volume II, Supplementary Documents
|
|
|