NetBSD/sys/dev/mvme/vme_two_isr.c

437 lines
12 KiB
C

/* $NetBSD: vme_two_isr.c,v 1.4 2003/07/14 15:47:21 lukem Exp $ */
/*-
* Copyright (c) 2001, 2002 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Steve C. Woodford.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Split off from vme_two.c specifically to deal with hardware assisted
* soft interrupts when the user hasn't specified `vmetwo0' in the
* kernel config file (mvme1[67]2 only).
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: vme_two_isr.c,v 1.4 2003/07/14 15:47:21 lukem Exp $");
#include "vmetwo.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <machine/cpu.h>
#include <machine/bus.h>
#include <dev/vme/vmereg.h>
#include <dev/vme/vmevar.h>
#include <dev/mvme/mvmebus.h>
#include <dev/mvme/vme_tworeg.h>
#include <dev/mvme/vme_twovar.h>
/*
* Non-zero if there is no VMEChip2 on this board.
*/
int vmetwo_not_present;
/*
* Array of interrupt handlers registered with us for the non-VMEbus
* vectored interrupts. Eg. ABORT Switch, SYSFAIL etc.
*
* We can't just install a caller's handler directly, since these
* interrupts have to be manually cleared, so we have a trampoline
* which does the clearing automatically.
*/
static struct vme_two_handler {
int (*isr_hand) __P((void *));
void *isr_arg;
} vme_two_handlers[(VME2_VECTOR_LOCAL_MAX - VME2_VECTOR_LOCAL_MIN) + 1];
#define VMETWO_HANDLERS_SZ (sizeof(vme_two_handlers) / \
sizeof(struct vme_two_handler))
static int vmetwo_local_isr_trampoline(void *);
static void vmetwo_softintr_assert(void);
static struct vmetwo_softc *vmetwo_sc;
int
vmetwo_probe(bus_space_tag_t bt, bus_addr_t offset)
{
bus_space_handle_t bh;
bus_space_map(bt, offset + VME2REG_LCSR_OFFSET, VME2LCSR_SIZE, 0, &bh);
if (bus_space_peek_4(bt, bh, VME2LCSR_MISC_STATUS, NULL) != 0) {
#if defined(MVME162) || defined(MVME172)
#if defined(MVME167) || defined(MVME177)
if (machineid == MVME_162 || machineid == MVME_172)
#endif
{
/*
* No VMEChip2 on mvme162/172 is not too big a
* deal; we can fall back on timer4 in the
* mcchip for h/w assisted soft interrupts...
*/
extern void pcctwosoftintrinit(void);
bus_space_unmap(bt, bh, VME2LCSR_SIZE);
vmetwo_not_present = 1;
pcctwosoftintrinit();
return (0);
}
#endif
#if defined(MVME167) || defined(MVME177) || defined(MVME88K)
/*
* No VMEChip2 on mvme167/177, however, is a Big Deal.
* In fact, it means the hardware's shot since the
* VMEChip2 is not a `build-option' on those boards.
*/
panic("VMEChip2 not responding! Faulty board?");
/* NOTREACHED */
#endif
#if defined(MVMEPPC)
/*
* No VMEChip2 on mvmeppc is no big deal.
*/
bus_space_unmap(bt, bh, VME2LCSR_SIZE);
vmetwo_not_present = 1;
return (0);
#endif
}
#if NVMETWO == 0
else {
/*
* The kernel config file has no `vmetwo0' device, but
* there is a VMEChip2 on the board. Fix up things
* just enough to hook VMEChip2 local interrupts.
*/
struct vmetwo_softc *sc;
/* XXX Should check sc != NULL here... */
MALLOC(sc, struct vmetwo_softc *, sizeof(*sc), M_DEVBUF,
M_NOWAIT);
sc->sc_mvmebus.sc_bust = bt;
sc->sc_lcrh = bh;
vmetwo_intr_init(sc);
return 0;
}
#else
bus_space_unmap(bt, bh, VME2LCSR_SIZE);
return (1);
#endif
}
void
vmetwo_intr_init(struct vmetwo_softc *sc)
{
u_int32_t reg;
int i;
vmetwo_sc = sc;
/* Clear out the ISR handler array */
for (i = 0; i < VMETWO_HANDLERS_SZ; i++)
vme_two_handlers[i].isr_hand = NULL;
/*
* Initialize the chip.
* Firstly, disable all VMEChip2 Interrupts
*/
reg = vme2_lcsr_read(sc, VME2LCSR_MISC_STATUS) & ~VME2_MISC_STATUS_MIEN;
vme2_lcsr_write(sc, VME2LCSR_MISC_STATUS, reg);
vme2_lcsr_write(sc, VME2LCSR_LOCAL_INTERRUPT_ENABLE, 0);
vme2_lcsr_write(sc, VME2LCSR_LOCAL_INTERRUPT_CLEAR,
VME2_LOCAL_INTERRUPT_CLEAR_ALL);
/* Zap all the IRQ level registers */
for (i = 0; i < VME2_NUM_IL_REGS; i++)
vme2_lcsr_write(sc, VME2LCSR_INTERRUPT_LEVEL_BASE + (i * 4), 0);
/* Disable the tick timers */
reg = vme2_lcsr_read(sc, VME2LCSR_TIMER_CONTROL);
reg &= ~VME2_TIMER_CONTROL_EN(0);
reg &= ~VME2_TIMER_CONTROL_EN(1);
vme2_lcsr_write(sc, VME2LCSR_TIMER_CONTROL, reg);
/* Set the VMEChip2's vector base register to the required value */
reg = vme2_lcsr_read(sc, VME2LCSR_VECTOR_BASE);
reg &= ~VME2_VECTOR_BASE_MASK;
reg |= VME2_VECTOR_BASE_REG_VALUE;
vme2_lcsr_write(sc, VME2LCSR_VECTOR_BASE, reg);
/* Set the Master Interrupt Enable bit now */
reg = vme2_lcsr_read(sc, VME2LCSR_MISC_STATUS) | VME2_MISC_STATUS_MIEN;
vme2_lcsr_write(sc, VME2LCSR_MISC_STATUS, reg);
/* Allow the MD code the chance to do some initialising */
vmetwo_md_intr_init(sc);
#if defined(MVME167) || defined(MVME177)
#if defined(MVME162) || defined(MVME172)
if (machineid != MVME_162 && machineid != MVME_172)
#endif
{
/*
* Let the NMI handler deal with level 7 ABORT switch
* interrupts
*/
vmetwo_intr_establish(sc, 7, 7, VME2_VEC_ABORT, 1,
nmihand, NULL, NULL);
}
#endif
/* Setup hardware assisted soft interrupts */
vmetwo_intr_establish(sc, 1, 1, VME2_VEC_SOFT0, 1,
(int (*)(void *))softintr_dispatch, NULL, NULL);
_softintr_chipset_assert = vmetwo_softintr_assert;
}
static int
vmetwo_local_isr_trampoline(arg)
void *arg;
{
struct vme_two_handler *isr;
int vec;
vec = (int) arg; /* 0x08 <= vec <= 0x1f */
/* Clear the interrupt source */
vme2_lcsr_write(vmetwo_sc, VME2LCSR_LOCAL_INTERRUPT_CLEAR,
VME2_LOCAL_INTERRUPT(vec));
isr = &vme_two_handlers[vec - VME2_VECTOR_LOCAL_OFFSET];
if (isr->isr_hand)
(void) (*isr->isr_hand) (isr->isr_arg);
else
printf("vmetwo: Spurious local interrupt, vector 0x%x\n", vec);
return (1);
}
void
vmetwo_local_intr_establish(pri, vec, hand, arg, evcnt)
int pri, vec;
int (*hand)(void *);
void *arg;
struct evcnt *evcnt;
{
vmetwo_intr_establish(vmetwo_sc, pri, pri, vec, 1, hand, arg, evcnt);
}
/* ARGSUSED */
void
vmetwo_intr_establish(csc, prior, lvl, vec, first, hand, arg, evcnt)
void *csc;
int prior, lvl, vec, first;
int (*hand)(void *);
void *arg;
struct evcnt *evcnt;
{
struct vmetwo_softc *sc = csc;
u_int32_t reg;
int bitoff;
int iloffset, ilshift;
int s;
s = splhigh();
#if NVMETWO > 0
/*
* Sort out interrupts generated locally by the VMEChip2 from
* those generated by VMEbus devices...
*/
if (vec >= VME2_VECTOR_LOCAL_MIN && vec <= VME2_VECTOR_LOCAL_MAX) {
#endif
/*
* Local interrupts need to be bounced through some
* trampoline code which acknowledges/clears them.
*/
vme_two_handlers[vec - VME2_VECTOR_LOCAL_MIN].isr_hand = hand;
vme_two_handlers[vec - VME2_VECTOR_LOCAL_MIN].isr_arg = arg;
hand = vmetwo_local_isr_trampoline;
arg = (void *) (vec - VME2_VECTOR_BASE);
/*
* Interrupt enable/clear bit offset is 0x08 - 0x1f
*/
bitoff = vec - VME2_VECTOR_BASE;
#if NVMETWO > 0
first = 1; /* Force the interrupt to be enabled */
} else {
/*
* Interrupts originating from the VMEbus are
* controlled by an offset of 0x00 - 0x07
*/
bitoff = lvl - 1;
}
#endif
/* Hook the interrupt */
(*sc->sc_isrlink)(sc->sc_isrcookie, hand, arg, prior, vec, evcnt);
/*
* Do we need to tell the VMEChip2 to let the interrupt through?
* (This is always true for locally-generated interrupts, but only
* needs doing once for each VMEbus interrupt level which is hooked)
*/
#if NVMETWO > 0
if (first) {
if (evcnt)
evcnt_attach_dynamic(evcnt, EVCNT_TYPE_INTR,
(*sc->sc_isrevcnt)(sc->sc_isrcookie, prior),
sc->sc_mvmebus.sc_dev.dv_xname,
mvmebus_irq_name[lvl]);
#endif
iloffset = VME2_ILOFFSET_FROM_VECTOR(bitoff) +
VME2LCSR_INTERRUPT_LEVEL_BASE;
ilshift = VME2_ILSHIFT_FROM_VECTOR(bitoff);
/* Program the specified interrupt to signal at 'prior' */
reg = vme2_lcsr_read(sc, iloffset);
reg &= ~(VME2_INTERRUPT_LEVEL_MASK << ilshift);
reg |= (prior << ilshift);
vme2_lcsr_write(sc, iloffset, reg);
/* Clear it */
vme2_lcsr_write(sc, VME2LCSR_LOCAL_INTERRUPT_CLEAR,
VME2_LOCAL_INTERRUPT(bitoff));
/* Enable it. */
reg = vme2_lcsr_read(sc, VME2LCSR_LOCAL_INTERRUPT_ENABLE);
reg |= VME2_LOCAL_INTERRUPT(bitoff);
vme2_lcsr_write(sc, VME2LCSR_LOCAL_INTERRUPT_ENABLE, reg);
#if NVMETWO > 0
}
#ifdef DIAGNOSTIC
else {
/* Verify the interrupt priority is the same */
iloffset = VME2_ILOFFSET_FROM_VECTOR(bitoff) +
VME2LCSR_INTERRUPT_LEVEL_BASE;
ilshift = VME2_ILSHIFT_FROM_VECTOR(bitoff);
reg = vme2_lcsr_read(sc, iloffset);
reg &= (VME2_INTERRUPT_LEVEL_MASK << ilshift);
if ((prior << ilshift) != reg)
panic("vmetwo_intr_establish: priority mismatch!");
}
#endif
#endif
splx(s);
}
void
vmetwo_intr_disestablish(csc, lvl, vec, last, evcnt)
void *csc;
int lvl, vec, last;
struct evcnt *evcnt;
{
struct vmetwo_softc *sc = csc;
u_int32_t reg;
int iloffset, ilshift;
int bitoff;
int s;
s = splhigh();
#if NVMETWO > 0
/*
* Sort out interrupts generated locally by the VMEChip2 from
* those generated by VMEbus devices...
*/
if (vec >= VME2_VECTOR_LOCAL_MIN && vec <= VME2_VECTOR_LOCAL_MAX) {
#endif
/*
* Interrupt enable/clear bit offset is 0x08 - 0x1f
*/
bitoff = vec - VME2_VECTOR_BASE;
vme_two_handlers[vec - VME2_VECTOR_LOCAL_MIN].isr_hand = NULL;
last = 1; /* Force the interrupt to be cleared */
#if NVMETWO > 0
} else {
/*
* Interrupts originating from the VMEbus are
* controlled by an offset of 0x00 - 0x07
*/
bitoff = lvl - 1;
}
#endif
/*
* Do we need to tell the VMEChip2 to block the interrupt?
* (This is always true for locally-generated interrupts, but only
* needs doing once when the last VMEbus handler for any given level
* has been unhooked.)
*/
if (last) {
iloffset = VME2_ILOFFSET_FROM_VECTOR(bitoff) +
VME2LCSR_INTERRUPT_LEVEL_BASE;
ilshift = VME2_ILSHIFT_FROM_VECTOR(bitoff);
/* Disable it. */
reg = vme2_lcsr_read(sc, VME2LCSR_LOCAL_INTERRUPT_ENABLE);
reg &= ~VME2_LOCAL_INTERRUPT(bitoff);
vme2_lcsr_write(sc, VME2LCSR_LOCAL_INTERRUPT_ENABLE, reg);
/* Set the interrupt's level to zero */
reg = vme2_lcsr_read(sc, iloffset);
reg &= ~(VME2_INTERRUPT_LEVEL_MASK << ilshift);
vme2_lcsr_write(sc, iloffset, reg);
/* Clear it */
vme2_lcsr_write(sc, VME2LCSR_LOCAL_INTERRUPT_CLEAR,
VME2_LOCAL_INTERRUPT(vec));
if (evcnt)
evcnt_detach(evcnt);
}
/* Un-hook it */
(*sc->sc_isrunlink)(sc->sc_isrcookie, vec);
splx(s);
}
static void
vmetwo_softintr_assert(void)
{
vme2_lcsr_write(vmetwo_sc, VME2LCSR_SOFTINT_SET, VME2_SOFTINT_SET(0));
}