1332 lines
30 KiB
C
1332 lines
30 KiB
C
/* $NetBSD: ustir.c,v 1.51 2022/03/12 21:15:25 riastradh Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2001 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by David Sainty <dsainty@NetBSD.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: ustir.c,v 1.51 2022/03/12 21:15:25 riastradh Exp $");
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_usb.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/device.h>
|
|
#include <sys/kmem.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/file.h>
|
|
#include <sys/poll.h>
|
|
#include <sys/select.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/kthread.h>
|
|
|
|
#ifdef USTIR_DEBUG_IOCTLS
|
|
#include <sys/ioctl.h>
|
|
#include <dev/usb/ustir.h>
|
|
#endif
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdevs.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/ustirreg.h>
|
|
|
|
#include <dev/ir/ir.h>
|
|
#include <dev/ir/irdaio.h>
|
|
#include <dev/ir/irframevar.h>
|
|
#include <dev/ir/sir.h>
|
|
|
|
#ifdef USTIR_DEBUG
|
|
#define DPRINTFN(n,x) if (ustirdebug>(n)) printf x
|
|
int ustirdebug = 0;
|
|
#else
|
|
#define DPRINTFN(n,x)
|
|
#endif
|
|
|
|
/* Max size with framing. */
|
|
#define MAX_USTIR_OUTPUT_FRAME (2*IRDA_MAX_FRAME_SIZE + IRDA_MAX_EBOFS + STIR_OUTPUT_HEADER_SIZE + 4)
|
|
|
|
#define USTIR_NSPEEDS 9
|
|
struct ustir_speedrec {
|
|
unsigned int speed;
|
|
unsigned int config;
|
|
};
|
|
|
|
Static struct ustir_speedrec const ustir_speeds[USTIR_NSPEEDS] = {
|
|
{ 4000000, STIR_BRMODE_4000000 },
|
|
{ 1152000, STIR_BRMODE_1152000 },
|
|
{ 576000, STIR_BRMODE_576000 },
|
|
{ 115200, STIR_BRMODE_115200 },
|
|
{ 57600, STIR_BRMODE_57600 },
|
|
{ 38400, STIR_BRMODE_38400 },
|
|
{ 19200, STIR_BRMODE_19200 },
|
|
{ 9600, STIR_BRMODE_9600 },
|
|
{ 2400, STIR_BRMODE_2400 }
|
|
};
|
|
|
|
struct ustir_softc {
|
|
device_t sc_dev;
|
|
struct usbd_device *sc_udev;
|
|
struct usbd_interface *sc_iface;
|
|
enum {
|
|
USTIR_INIT_NONE,
|
|
USTIR_INIT_INITED
|
|
} sc_init_state;
|
|
|
|
uint8_t *sc_ur_buf; /* Unencapsulated frame */
|
|
u_int sc_ur_framelen;
|
|
|
|
uint8_t *sc_rd_buf; /* Raw incoming data stream */
|
|
size_t sc_rd_index;
|
|
int sc_rd_addr;
|
|
struct usbd_pipe *sc_rd_pipe;
|
|
struct usbd_xfer *sc_rd_xfer;
|
|
u_int sc_rd_count;
|
|
int sc_rd_readinprogress;
|
|
u_int sc_rd_expectdataticks;
|
|
u_char sc_rd_err;
|
|
struct framestate sc_framestate;
|
|
struct lwp *sc_thread;
|
|
struct selinfo sc_rd_sel;
|
|
|
|
uint8_t *sc_wr_buf;
|
|
int sc_wr_addr;
|
|
int sc_wr_stalewrite;
|
|
struct usbd_xfer *sc_wr_xfer;
|
|
struct usbd_pipe *sc_wr_pipe;
|
|
struct selinfo sc_wr_sel;
|
|
|
|
enum {
|
|
udir_input, /* Receiving data */
|
|
udir_output, /* Transmitting data */
|
|
udir_stalled, /* Error preventing data flow */
|
|
udir_idle /* Neither receiving nor transmitting */
|
|
} sc_direction;
|
|
|
|
struct ustir_speedrec const *sc_speedrec;
|
|
|
|
device_t sc_child;
|
|
struct irda_params sc_params;
|
|
|
|
int sc_refcnt;
|
|
char sc_closing;
|
|
char sc_dying;
|
|
};
|
|
|
|
/* True if we cannot safely read data from the device */
|
|
#define USTIR_BLOCK_RX_DATA(sc) ((sc)->sc_ur_framelen != 0)
|
|
|
|
#define USTIR_WR_TIMEOUT 200
|
|
|
|
Static int ustir_open(void *, int, int, struct lwp *);
|
|
Static int ustir_close(void *, int, int, struct lwp *);
|
|
Static int ustir_read(void *, struct uio *, int);
|
|
Static int ustir_write(void *, struct uio *, int);
|
|
Static int ustir_set_params(void *, struct irda_params *);
|
|
Static int ustir_get_speeds(void *, int *);
|
|
Static int ustir_get_turnarounds(void *, int *);
|
|
Static int ustir_poll(void *, int, struct lwp *);
|
|
Static int ustir_kqfilter(void *, struct knote *);
|
|
|
|
#ifdef USTIR_DEBUG_IOCTLS
|
|
Static int ustir_ioctl(void *, u_long, void *, int, struct lwp *);
|
|
#endif
|
|
|
|
Static struct irframe_methods const ustir_methods = {
|
|
ustir_open, ustir_close, ustir_read, ustir_write, ustir_poll,
|
|
ustir_kqfilter, ustir_set_params, ustir_get_speeds,
|
|
ustir_get_turnarounds,
|
|
#ifdef USTIR_DEBUG_IOCTLS
|
|
ustir_ioctl
|
|
#endif
|
|
};
|
|
|
|
Static void ustir_rd_cb(struct usbd_xfer *, void *, usbd_status);
|
|
Static usbd_status ustir_start_read(struct ustir_softc *);
|
|
Static void ustir_periodic(struct ustir_softc *);
|
|
Static void ustir_thread(void *);
|
|
|
|
static usbd_status
|
|
ustir_read_reg(struct ustir_softc *sc, unsigned int reg, uint8_t *data)
|
|
{
|
|
usb_device_request_t req;
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = STIR_CMD_READMULTIREG;
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 1);
|
|
|
|
return usbd_do_request(sc->sc_udev, &req, data);
|
|
}
|
|
|
|
static usbd_status
|
|
ustir_write_reg(struct ustir_softc *sc, unsigned int reg, uint8_t data)
|
|
{
|
|
usb_device_request_t req;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = STIR_CMD_WRITESINGLEREG;
|
|
USETW(req.wValue, data);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 0);
|
|
|
|
return usbd_do_request(sc->sc_udev, &req, NULL);
|
|
}
|
|
|
|
#ifdef USTIR_DEBUG
|
|
static void
|
|
ustir_dumpdata(uint8_t const *data, size_t dlen, char const *desc)
|
|
{
|
|
size_t bdindex;
|
|
printf("%s: (%lx)", desc, (unsigned long)dlen);
|
|
for (bdindex = 0; bdindex < dlen; bdindex++)
|
|
printf(" %02x", (unsigned int)data[bdindex]);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
static int ustir_match(device_t, cfdata_t, void *);
|
|
static void ustir_attach(device_t, device_t, void *);
|
|
static void ustir_childdet(device_t, device_t);
|
|
static int ustir_detach(device_t, int);
|
|
static int ustir_activate(device_t, enum devact);
|
|
|
|
CFATTACH_DECL2_NEW(ustir, sizeof(struct ustir_softc), ustir_match,
|
|
ustir_attach, ustir_detach, ustir_activate, NULL, ustir_childdet);
|
|
|
|
static int
|
|
ustir_match(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct usb_attach_arg *uaa = aux;
|
|
|
|
DPRINTFN(50,("ustir_match\n"));
|
|
|
|
if (uaa->uaa_vendor == USB_VENDOR_SIGMATEL &&
|
|
uaa->uaa_product == USB_PRODUCT_SIGMATEL_IRDA)
|
|
return UMATCH_VENDOR_PRODUCT;
|
|
|
|
return UMATCH_NONE;
|
|
}
|
|
|
|
static void
|
|
ustir_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct ustir_softc *sc = device_private(self);
|
|
struct usb_attach_arg *uaa = aux;
|
|
struct usbd_device *dev = uaa->uaa_device;
|
|
struct usbd_interface *iface;
|
|
char *devinfop;
|
|
usb_endpoint_descriptor_t *ed;
|
|
uint8_t epcount;
|
|
int i;
|
|
struct ir_attach_args ia;
|
|
|
|
DPRINTFN(10,("ustir_attach: sc=%p\n", sc));
|
|
|
|
sc->sc_dev = self;
|
|
sc->sc_init_state = USTIR_INIT_NONE;
|
|
|
|
aprint_naive("\n");
|
|
aprint_normal("\n");
|
|
|
|
devinfop = usbd_devinfo_alloc(dev, 0);
|
|
aprint_normal_dev(self, "%s\n", devinfop);
|
|
usbd_devinfo_free(devinfop);
|
|
|
|
if (usbd_set_config_index(dev, 0, 1)
|
|
|| usbd_device2interface_handle(dev, 0, &iface)) {
|
|
aprint_error_dev(self, "Configuration failed\n");
|
|
return;
|
|
}
|
|
|
|
sc->sc_udev = dev;
|
|
sc->sc_iface = iface;
|
|
|
|
epcount = 0;
|
|
(void)usbd_endpoint_count(iface, &epcount);
|
|
|
|
sc->sc_rd_addr = -1;
|
|
sc->sc_wr_addr = -1;
|
|
for (i = 0; i < epcount; i++) {
|
|
ed = usbd_interface2endpoint_descriptor(iface, i);
|
|
if (ed == NULL) {
|
|
aprint_error_dev(self, "couldn't get ep %d\n", i);
|
|
return;
|
|
}
|
|
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
|
|
sc->sc_rd_addr = ed->bEndpointAddress;
|
|
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
|
|
sc->sc_wr_addr = ed->bEndpointAddress;
|
|
}
|
|
}
|
|
if (sc->sc_rd_addr == -1 || sc->sc_wr_addr == -1) {
|
|
aprint_error_dev(self, "missing endpoint\n");
|
|
return;
|
|
}
|
|
|
|
DPRINTFN(10, ("ustir_attach: %p\n", sc->sc_udev));
|
|
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev);
|
|
|
|
ia.ia_type = IR_TYPE_IRFRAME;
|
|
ia.ia_methods = &ustir_methods;
|
|
ia.ia_handle = sc;
|
|
|
|
sc->sc_child = config_found(self, &ia, ir_print, CFARGS_NONE);
|
|
selinit(&sc->sc_rd_sel);
|
|
selinit(&sc->sc_wr_sel);
|
|
sc->sc_init_state = USTIR_INIT_INITED;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ustir_childdet(device_t self, device_t child)
|
|
{
|
|
struct ustir_softc *sc = device_private(self);
|
|
|
|
KASSERT(sc->sc_child == child);
|
|
sc->sc_child = NULL;
|
|
}
|
|
|
|
static int
|
|
ustir_detach(device_t self, int flags)
|
|
{
|
|
struct ustir_softc *sc = device_private(self);
|
|
int s;
|
|
int rv = 0;
|
|
|
|
DPRINTFN(0, ("ustir_detach: sc=%p flags=%d\n", sc, flags));
|
|
|
|
sc->sc_closing = sc->sc_dying = 1;
|
|
|
|
wakeup(&sc->sc_thread);
|
|
|
|
while (sc->sc_thread != NULL)
|
|
tsleep(&sc->sc_closing, PWAIT, "usircl", 0);
|
|
|
|
/* Abort all pipes. Causes processes waiting for transfer to wake. */
|
|
if (sc->sc_rd_pipe != NULL) {
|
|
usbd_abort_pipe(sc->sc_rd_pipe);
|
|
}
|
|
if (sc->sc_wr_pipe != NULL) {
|
|
usbd_abort_pipe(sc->sc_wr_pipe);
|
|
}
|
|
if (sc->sc_rd_xfer != NULL) {
|
|
usbd_destroy_xfer(sc->sc_rd_xfer);
|
|
sc->sc_rd_xfer = NULL;
|
|
sc->sc_rd_buf = NULL;
|
|
}
|
|
if (sc->sc_wr_xfer != NULL) {
|
|
usbd_destroy_xfer(sc->sc_wr_xfer);
|
|
sc->sc_wr_xfer = NULL;
|
|
sc->sc_wr_buf = NULL;
|
|
}
|
|
if (sc->sc_rd_pipe != NULL) {
|
|
usbd_close_pipe(sc->sc_rd_pipe);
|
|
sc->sc_rd_pipe = NULL;
|
|
}
|
|
if (sc->sc_wr_pipe != NULL) {
|
|
usbd_close_pipe(sc->sc_wr_pipe);
|
|
sc->sc_wr_pipe = NULL;
|
|
}
|
|
wakeup(&sc->sc_ur_framelen);
|
|
wakeup(&sc->sc_wr_buf);
|
|
|
|
s = splusb();
|
|
if (--sc->sc_refcnt >= 0) {
|
|
/* Wait for processes to go away. */
|
|
usb_detach_waitold(sc->sc_dev);
|
|
}
|
|
splx(s);
|
|
|
|
if (sc->sc_child != NULL)
|
|
rv = config_detach(sc->sc_child, flags);
|
|
|
|
if (sc->sc_init_state >= USTIR_INIT_INITED) {
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
|
|
sc->sc_dev);
|
|
seldestroy(&sc->sc_rd_sel);
|
|
seldestroy(&sc->sc_wr_sel);
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
/* Returns 0 if more data required, 1 if a complete frame was extracted */
|
|
static int
|
|
deframe_rd_ur(struct ustir_softc *sc)
|
|
{
|
|
while (sc->sc_rd_index < sc->sc_rd_count) {
|
|
uint8_t const *buf;
|
|
size_t buflen;
|
|
enum frameresult fresult;
|
|
|
|
buf = &sc->sc_rd_buf[sc->sc_rd_index];
|
|
buflen = sc->sc_rd_count - sc->sc_rd_index;
|
|
|
|
fresult = deframe_process(&sc->sc_framestate, &buf, &buflen);
|
|
|
|
sc->sc_rd_index = sc->sc_rd_count - buflen;
|
|
|
|
DPRINTFN(1,("%s: result=%d\n", __func__, (int)fresult));
|
|
|
|
switch (fresult) {
|
|
case FR_IDLE:
|
|
case FR_INPROGRESS:
|
|
case FR_FRAMEBADFCS:
|
|
case FR_FRAMEMALFORMED:
|
|
case FR_BUFFEROVERRUN:
|
|
break;
|
|
case FR_FRAMEOK:
|
|
sc->sc_ur_framelen = sc->sc_framestate.bufindex;
|
|
wakeup(&sc->sc_ur_framelen); /* XXX should use flag */
|
|
selnotify(&sc->sc_rd_sel, 0, 0);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* Reset indices into USB-side buffer */
|
|
sc->sc_rd_index = sc->sc_rd_count = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Direction transitions:
|
|
*
|
|
* ustir_periodic() can switch the direction from:
|
|
*
|
|
* output -> idle
|
|
* output -> stalled
|
|
* stalled -> idle
|
|
* idle -> input
|
|
*
|
|
* ustir_rd_cb() can switch the direction from:
|
|
*
|
|
* input -> stalled
|
|
* input -> idle
|
|
*
|
|
* ustir_write() can switch the direction from:
|
|
*
|
|
* idle -> output
|
|
*/
|
|
Static void
|
|
ustir_periodic(struct ustir_softc *sc)
|
|
{
|
|
DPRINTFN(60, ("%s: direction = %d\n",
|
|
__func__, sc->sc_direction));
|
|
|
|
if (sc->sc_direction == udir_output ||
|
|
sc->sc_direction == udir_stalled) {
|
|
usbd_status err;
|
|
uint8_t regval;
|
|
|
|
DPRINTFN(60, ("%s: reading status register\n",
|
|
__func__));
|
|
|
|
err = ustir_read_reg(sc, STIR_REG_STATUS,
|
|
®val);
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"status register read failed: %s\n",
|
|
usbd_errstr(err));
|
|
} else {
|
|
DPRINTFN(10, ("%s: status register = %#x\n",
|
|
__func__,
|
|
(unsigned int)regval));
|
|
if (sc->sc_direction == udir_output &&
|
|
!(regval & STIR_RSTATUS_FFDIR))
|
|
/* Output has completed */
|
|
sc->sc_direction = udir_idle;
|
|
if (regval & STIR_RSTATUS_FFOVER) {
|
|
/*
|
|
* On an overrun the FIFO hangs, and
|
|
* any data bulk transfers will stall.
|
|
* Reset the FIFO.
|
|
*/
|
|
sc->sc_direction = udir_stalled;
|
|
|
|
DPRINTFN(10, ("%s: clearing FIFO error\n",
|
|
__func__));
|
|
|
|
err = ustir_write_reg(sc, STIR_REG_STATUS,
|
|
STIR_RSTATUS_FFCLR);
|
|
/* XXX if we fail partway through
|
|
* this, we may not recover? */
|
|
if (err == USBD_NORMAL_COMPLETION)
|
|
err = ustir_write_reg(sc,
|
|
STIR_REG_STATUS,
|
|
0);
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"FIFO reset failed: %s\n",
|
|
usbd_errstr(err));
|
|
} else {
|
|
/* FIFO reset */
|
|
sc->sc_direction = udir_idle;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (sc->sc_wr_stalewrite && sc->sc_direction == udir_idle) {
|
|
/*
|
|
* In a stale write case, we need to check if the
|
|
* write has completed. Once that has happened, the
|
|
* write is no longer stale.
|
|
*
|
|
* But note that we may immediately start a read poll...
|
|
*/
|
|
sc->sc_wr_stalewrite = 0;
|
|
wakeup(&sc->sc_wr_buf);
|
|
}
|
|
|
|
if (!sc->sc_rd_readinprogress &&
|
|
(sc->sc_direction == udir_idle ||
|
|
sc->sc_direction == udir_input))
|
|
/* Do a read poll if appropriate... */
|
|
ustir_start_read(sc);
|
|
}
|
|
|
|
Static void
|
|
ustir_thread(void *arg)
|
|
{
|
|
struct ustir_softc *sc = arg;
|
|
|
|
DPRINTFN(20, ("%s: starting polling thread\n", __func__));
|
|
|
|
while (!sc->sc_closing) {
|
|
if (!sc->sc_rd_readinprogress && !USTIR_BLOCK_RX_DATA(sc))
|
|
ustir_periodic(sc);
|
|
|
|
if (!sc->sc_closing) {
|
|
int error;
|
|
error = tsleep(&sc->sc_thread, PWAIT,
|
|
"ustir", hz / 10);
|
|
if (error == EWOULDBLOCK &&
|
|
sc->sc_rd_expectdataticks > 0)
|
|
/*
|
|
* After a timeout decrement the tick
|
|
* counter within which time we expect
|
|
* data to arrive if we are receiving
|
|
* data...
|
|
*/
|
|
sc->sc_rd_expectdataticks--;
|
|
}
|
|
}
|
|
|
|
DPRINTFN(20, ("%s: exiting polling thread\n", __func__));
|
|
|
|
sc->sc_thread = NULL;
|
|
|
|
wakeup(&sc->sc_closing);
|
|
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeupold(sc->sc_dev);
|
|
|
|
kthread_exit(0);
|
|
}
|
|
|
|
Static void
|
|
ustir_rd_cb(struct usbd_xfer *xfer, void *priv,
|
|
usbd_status status)
|
|
{
|
|
struct ustir_softc *sc = priv;
|
|
uint32_t size;
|
|
|
|
DPRINTFN(60, ("%s: sc=%p\n", __func__, sc));
|
|
|
|
/* Read is no longer in progress */
|
|
sc->sc_rd_readinprogress = 0;
|
|
|
|
if (status == USBD_CANCELLED || sc->sc_closing) /* this is normal */
|
|
return;
|
|
if (status) {
|
|
size = 0;
|
|
sc->sc_rd_err = 1;
|
|
|
|
if (sc->sc_direction == udir_input ||
|
|
sc->sc_direction == udir_idle) {
|
|
/*
|
|
* Receive error, probably need to clear error
|
|
* condition.
|
|
*/
|
|
sc->sc_direction = udir_stalled;
|
|
}
|
|
} else {
|
|
usbd_get_xfer_status(xfer, NULL, NULL, &size, NULL);
|
|
}
|
|
|
|
sc->sc_rd_index = 0;
|
|
sc->sc_rd_count = size;
|
|
|
|
DPRINTFN(((size > 0 || sc->sc_rd_err != 0) ? 20 : 60),
|
|
("%s: sc=%p size=%u, err=%d\n", __func__,
|
|
sc, size, sc->sc_rd_err));
|
|
|
|
#ifdef USTIR_DEBUG
|
|
if (ustirdebug >= 20 && size > 0)
|
|
ustir_dumpdata(sc->sc_rd_buf, size, __func__);
|
|
#endif
|
|
|
|
if (!deframe_rd_ur(sc)) {
|
|
if (!deframe_isclear(&sc->sc_framestate) && size == 0 &&
|
|
sc->sc_rd_expectdataticks == 0) {
|
|
/*
|
|
* Expected data, but didn't get it
|
|
* within expected time...
|
|
*/
|
|
DPRINTFN(5,("%s: incoming packet timeout\n",
|
|
__func__));
|
|
deframe_clear(&sc->sc_framestate);
|
|
} else if (size > 0) {
|
|
/*
|
|
* If we also received actual data, reset the
|
|
* data read timeout and wake up the possibly
|
|
* sleeping thread...
|
|
*/
|
|
sc->sc_rd_expectdataticks = 2;
|
|
wakeup(&sc->sc_thread);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check if incoming data has stopped, or that we cannot
|
|
* safely read any more data. In the case of the latter we
|
|
* must switch to idle so that a write will not block...
|
|
*/
|
|
if (sc->sc_direction == udir_input &&
|
|
((size == 0 && sc->sc_rd_expectdataticks == 0) ||
|
|
USTIR_BLOCK_RX_DATA(sc))) {
|
|
DPRINTFN(8,("%s: idling on packet timeout, "
|
|
"complete frame, or no data\n", __func__));
|
|
sc->sc_direction = udir_idle;
|
|
|
|
/* Wake up for possible output */
|
|
wakeup(&sc->sc_wr_buf);
|
|
selnotify(&sc->sc_wr_sel, 0, 0);
|
|
}
|
|
}
|
|
|
|
Static usbd_status
|
|
ustir_start_read(struct ustir_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
|
|
DPRINTFN(60,("%s: sc=%p, size=%d\n", __func__, sc,
|
|
sc->sc_params.maxsize));
|
|
|
|
if (sc->sc_dying)
|
|
return USBD_IOERROR;
|
|
|
|
if (USTIR_BLOCK_RX_DATA(sc) || deframe_rd_ur(sc)) {
|
|
/*
|
|
* Can't start reading just yet. Since we aren't
|
|
* going to start a read, have to switch direction to
|
|
* idle.
|
|
*/
|
|
sc->sc_direction = udir_idle;
|
|
return USBD_NORMAL_COMPLETION;
|
|
}
|
|
|
|
/* Starting a read... */
|
|
sc->sc_rd_readinprogress = 1;
|
|
sc->sc_direction = udir_input;
|
|
|
|
if (sc->sc_rd_err) {
|
|
sc->sc_rd_err = 0;
|
|
DPRINTFN(0, ("%s: clear stall\n", __func__));
|
|
usbd_clear_endpoint_stall(sc->sc_rd_pipe);
|
|
}
|
|
|
|
usbd_setup_xfer(sc->sc_rd_xfer, sc, sc->sc_rd_buf,
|
|
sc->sc_params.maxsize, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT,
|
|
ustir_rd_cb);
|
|
err = usbd_transfer(sc->sc_rd_xfer);
|
|
if (err != USBD_IN_PROGRESS) {
|
|
DPRINTFN(0, ("%s: err=%d\n", __func__, (int)err));
|
|
return err;
|
|
}
|
|
return USBD_NORMAL_COMPLETION;
|
|
}
|
|
|
|
Static int
|
|
ustir_activate(device_t self, enum devact act)
|
|
{
|
|
struct ustir_softc *sc = device_private(self);
|
|
|
|
switch (act) {
|
|
case DVACT_DEACTIVATE:
|
|
sc->sc_dying = 1;
|
|
return 0;
|
|
default:
|
|
return EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
Static int
|
|
ustir_open(void *h, int flag, int mode,
|
|
struct lwp *l)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
int error;
|
|
usbd_status err;
|
|
|
|
DPRINTFN(0, ("%s: sc=%p\n", __func__, sc));
|
|
|
|
err = usbd_open_pipe(sc->sc_iface, sc->sc_rd_addr, 0, &sc->sc_rd_pipe);
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
error = EIO;
|
|
goto bad1;
|
|
}
|
|
err = usbd_open_pipe(sc->sc_iface, sc->sc_wr_addr, 0, &sc->sc_wr_pipe);
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
error = EIO;
|
|
goto bad2;
|
|
}
|
|
error = usbd_create_xfer(sc->sc_rd_pipe, IRDA_MAX_FRAME_SIZE,
|
|
0, 0, &sc->sc_rd_xfer);
|
|
if (error)
|
|
goto bad3;
|
|
sc->sc_rd_buf = usbd_get_buffer(sc->sc_rd_xfer);
|
|
|
|
error = usbd_create_xfer(sc->sc_wr_pipe,
|
|
IRDA_MAX_FRAME_SIZE + STIR_OUTPUT_HEADER_SIZE,
|
|
USBD_FORCE_SHORT_XFER, 0, &sc->sc_wr_xfer);
|
|
if (error)
|
|
goto bad4;
|
|
sc->sc_wr_buf = usbd_get_buffer(sc->sc_wr_xfer);
|
|
|
|
sc->sc_ur_buf = kmem_alloc(IRDA_MAX_FRAME_SIZE, KM_SLEEP);
|
|
sc->sc_rd_index = sc->sc_rd_count = 0;
|
|
sc->sc_closing = 0;
|
|
sc->sc_rd_readinprogress = 0;
|
|
sc->sc_rd_expectdataticks = 0;
|
|
sc->sc_ur_framelen = 0;
|
|
sc->sc_rd_err = 0;
|
|
sc->sc_wr_stalewrite = 0;
|
|
sc->sc_speedrec = NULL;
|
|
sc->sc_direction = udir_idle;
|
|
sc->sc_params.speed = 0;
|
|
sc->sc_params.ebofs = 0;
|
|
sc->sc_params.maxsize = IRDA_MAX_FRAME_SIZE;
|
|
|
|
deframe_init(&sc->sc_framestate, sc->sc_ur_buf, IRDA_MAX_FRAME_SIZE);
|
|
|
|
/* Increment reference for thread */
|
|
sc->sc_refcnt++;
|
|
|
|
error = kthread_create(PRI_NONE, 0, NULL, ustir_thread, sc,
|
|
&sc->sc_thread, "%s", device_xname(sc->sc_dev));
|
|
if (error) {
|
|
sc->sc_refcnt--;
|
|
goto bad5;
|
|
}
|
|
|
|
return 0;
|
|
|
|
bad5:
|
|
usbd_destroy_xfer(sc->sc_wr_xfer);
|
|
sc->sc_wr_xfer = NULL;
|
|
bad4:
|
|
usbd_destroy_xfer(sc->sc_rd_xfer);
|
|
sc->sc_rd_xfer = NULL;
|
|
bad3:
|
|
usbd_close_pipe(sc->sc_wr_pipe);
|
|
sc->sc_wr_pipe = NULL;
|
|
bad2:
|
|
usbd_close_pipe(sc->sc_rd_pipe);
|
|
sc->sc_rd_pipe = NULL;
|
|
bad1:
|
|
return error;
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
Static int
|
|
ustir_close(void *h, int flag, int mode,
|
|
struct lwp *l)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
|
|
DPRINTFN(0, ("%s: sc=%p\n", __func__, sc));
|
|
|
|
sc->sc_refcnt++;
|
|
|
|
sc->sc_rd_readinprogress = 1;
|
|
sc->sc_closing = 1;
|
|
|
|
wakeup(&sc->sc_thread);
|
|
|
|
while (sc->sc_thread != NULL)
|
|
tsleep(&sc->sc_closing, PWAIT, "usircl", 0);
|
|
|
|
if (sc->sc_rd_pipe != NULL) {
|
|
usbd_abort_pipe(sc->sc_rd_pipe);
|
|
sc->sc_rd_pipe = NULL;
|
|
}
|
|
if (sc->sc_wr_pipe != NULL) {
|
|
usbd_abort_pipe(sc->sc_wr_pipe);
|
|
sc->sc_wr_pipe = NULL;
|
|
}
|
|
if (sc->sc_rd_xfer != NULL) {
|
|
usbd_destroy_xfer(sc->sc_rd_xfer);
|
|
sc->sc_rd_xfer = NULL;
|
|
sc->sc_rd_buf = NULL;
|
|
}
|
|
if (sc->sc_wr_xfer != NULL) {
|
|
usbd_destroy_xfer(sc->sc_wr_xfer);
|
|
sc->sc_wr_xfer = NULL;
|
|
sc->sc_wr_buf = NULL;
|
|
}
|
|
if (sc->sc_ur_buf != NULL) {
|
|
kmem_free(sc->sc_ur_buf, IRDA_MAX_FRAME_SIZE);
|
|
sc->sc_ur_buf = NULL;
|
|
}
|
|
if (sc->sc_rd_pipe != NULL) {
|
|
usbd_close_pipe(sc->sc_rd_pipe);
|
|
sc->sc_rd_pipe = NULL;
|
|
}
|
|
if (sc->sc_wr_pipe != NULL) {
|
|
usbd_close_pipe(sc->sc_wr_pipe);
|
|
sc->sc_wr_pipe = NULL;
|
|
}
|
|
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeupold(sc->sc_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
Static int
|
|
ustir_read(void *h, struct uio *uio, int flag)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
int s;
|
|
int error;
|
|
u_int uframelen;
|
|
|
|
DPRINTFN(1,("%s: sc=%p\n", __func__, sc));
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_rd_buf == NULL)
|
|
return EINVAL;
|
|
#endif
|
|
|
|
sc->sc_refcnt++;
|
|
|
|
if (!sc->sc_rd_readinprogress && !USTIR_BLOCK_RX_DATA(sc))
|
|
/* Possibly wake up polling thread */
|
|
wakeup(&sc->sc_thread);
|
|
|
|
do {
|
|
s = splusb();
|
|
while (sc->sc_ur_framelen == 0) {
|
|
DPRINTFN(5,("%s: calling tsleep()\n", __func__));
|
|
error = tsleep(&sc->sc_ur_framelen, PZERO | PCATCH,
|
|
"usirrd", 0);
|
|
if (sc->sc_dying)
|
|
error = EIO;
|
|
if (error) {
|
|
splx(s);
|
|
DPRINTFN(0, ("%s: tsleep() = %d\n",
|
|
__func__, error));
|
|
goto ret;
|
|
}
|
|
}
|
|
splx(s);
|
|
|
|
uframelen = sc->sc_ur_framelen;
|
|
DPRINTFN(1,("%s: sc=%p framelen=%u, hdr=0x%02x\n",
|
|
__func__, sc, uframelen, sc->sc_ur_buf[0]));
|
|
if (uframelen > uio->uio_resid)
|
|
error = EINVAL;
|
|
else
|
|
error = uiomove(sc->sc_ur_buf, uframelen, uio);
|
|
sc->sc_ur_framelen = 0;
|
|
|
|
if (!deframe_rd_ur(sc) && uframelen > 0) {
|
|
/*
|
|
* Need to wait for another read to obtain a
|
|
* complete frame... If we also obtained
|
|
* actual data, wake up the possibly sleeping
|
|
* thread immediately...
|
|
*/
|
|
wakeup(&sc->sc_thread);
|
|
}
|
|
} while (uframelen == 0);
|
|
|
|
DPRINTFN(1,("%s: return %d\n", __func__, error));
|
|
|
|
ret:
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeupold(sc->sc_dev);
|
|
return error;
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
Static int
|
|
ustir_write(void *h, struct uio *uio, int flag)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
usbd_status err;
|
|
uint32_t wrlen;
|
|
int error, sirlength;
|
|
uint8_t *wrbuf;
|
|
int s;
|
|
|
|
DPRINTFN(1,("%s: sc=%p\n", __func__, sc));
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_wr_buf == NULL)
|
|
return EINVAL;
|
|
#endif
|
|
|
|
wrlen = uio->uio_resid;
|
|
if (wrlen > sc->sc_params.maxsize)
|
|
return EINVAL;
|
|
|
|
sc->sc_refcnt++;
|
|
|
|
if (!USTIR_BLOCK_RX_DATA(sc)) {
|
|
/*
|
|
* If reads are not blocked, determine what action we
|
|
* should potentially take...
|
|
*/
|
|
if (sc->sc_direction == udir_output) {
|
|
/*
|
|
* If the last operation was an output, wait for the
|
|
* polling thread to check for incoming data.
|
|
*/
|
|
sc->sc_wr_stalewrite = 1;
|
|
wakeup(&sc->sc_thread);
|
|
} else if (!sc->sc_rd_readinprogress &&
|
|
(sc->sc_direction == udir_idle ||
|
|
sc->sc_direction == udir_input)) {
|
|
/* If idle, check for input before outputting */
|
|
ustir_start_read(sc);
|
|
}
|
|
}
|
|
|
|
s = splusb();
|
|
while (sc->sc_wr_stalewrite ||
|
|
(sc->sc_direction != udir_output &&
|
|
sc->sc_direction != udir_idle)) {
|
|
DPRINTFN(5, ("%s: sc=%p stalewrite=%d direction=%d, "
|
|
"calling tsleep()\n", __func__,
|
|
sc, sc->sc_wr_stalewrite, sc->sc_direction));
|
|
error = tsleep(&sc->sc_wr_buf, PZERO | PCATCH,
|
|
"usirwr", 0);
|
|
if (sc->sc_dying)
|
|
error = EIO;
|
|
if (error) {
|
|
splx(s);
|
|
DPRINTFN(0, ("%s: tsleep() = %d\n", __func__,
|
|
error));
|
|
goto ret;
|
|
}
|
|
}
|
|
splx(s);
|
|
|
|
wrbuf = sc->sc_wr_buf;
|
|
|
|
/* Build header */
|
|
wrbuf[0] = STIR_OUTPUT_HEADER_BYTE0;
|
|
wrbuf[1] = STIR_OUTPUT_HEADER_BYTE1;
|
|
|
|
sirlength = irda_sir_frame(&wrbuf[STIR_OUTPUT_HEADER_SIZE],
|
|
MAX_USTIR_OUTPUT_FRAME -
|
|
STIR_OUTPUT_HEADER_SIZE,
|
|
uio, sc->sc_params.ebofs);
|
|
if (sirlength < 0) {
|
|
error = -sirlength;
|
|
} else {
|
|
uint32_t btlen;
|
|
|
|
DPRINTFN(1, ("%s: transfer %u bytes\n", __func__,
|
|
(unsigned int)wrlen));
|
|
|
|
wrbuf[2] = sirlength & 0xff;
|
|
wrbuf[3] = (sirlength >> 8) & 0xff;
|
|
|
|
btlen = STIR_OUTPUT_HEADER_SIZE + sirlength;
|
|
|
|
sc->sc_direction = udir_output;
|
|
|
|
#ifdef USTIR_DEBUG
|
|
if (ustirdebug >= 20)
|
|
ustir_dumpdata(wrbuf, btlen, __func__);
|
|
#endif
|
|
|
|
err = usbd_bulk_transfer(sc->sc_wr_xfer, sc->sc_wr_pipe,
|
|
USBD_FORCE_SHORT_XFER, USTIR_WR_TIMEOUT, wrbuf, &btlen);
|
|
DPRINTFN(2, ("%s: err=%d\n", __func__, err));
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
if (err == USBD_INTERRUPTED)
|
|
error = EINTR;
|
|
else if (err == USBD_TIMEOUT)
|
|
error = ETIMEDOUT;
|
|
else
|
|
error = EIO;
|
|
} else {
|
|
error = 0;
|
|
}
|
|
}
|
|
|
|
ret:
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeupold(sc->sc_dev);
|
|
|
|
DPRINTFN(1,("%s: sc=%p done\n", __func__, sc));
|
|
return error;
|
|
}
|
|
|
|
Static int
|
|
ustir_poll(void *h, int events, struct lwp *l)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
int revents = 0;
|
|
|
|
DPRINTFN(1,("%s: sc=%p\n", __func__, sc));
|
|
|
|
if (events & (POLLOUT | POLLWRNORM)) {
|
|
if (sc->sc_direction != udir_input) {
|
|
revents |= events & (POLLOUT | POLLWRNORM);
|
|
} else {
|
|
DPRINTFN(2,("%s: recording write select\n",
|
|
__func__));
|
|
selrecord(l, &sc->sc_wr_sel);
|
|
}
|
|
}
|
|
|
|
if (events & (POLLIN | POLLRDNORM)) {
|
|
if (sc->sc_ur_framelen != 0) {
|
|
DPRINTFN(2,("%s: have data\n", __func__));
|
|
revents |= events & (POLLIN | POLLRDNORM);
|
|
} else {
|
|
DPRINTFN(2,("%s: recording read select\n",
|
|
__func__));
|
|
selrecord(l, &sc->sc_rd_sel);
|
|
}
|
|
}
|
|
|
|
return revents;
|
|
}
|
|
|
|
static void
|
|
filt_ustirrdetach(struct knote *kn)
|
|
{
|
|
struct ustir_softc *sc = kn->kn_hook;
|
|
int s;
|
|
|
|
s = splusb();
|
|
selremove_knote(&sc->sc_rd_sel, kn);
|
|
splx(s);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
filt_ustirread(struct knote *kn, long hint)
|
|
{
|
|
struct ustir_softc *sc = kn->kn_hook;
|
|
|
|
kn->kn_data = sc->sc_ur_framelen;
|
|
return kn->kn_data > 0;
|
|
}
|
|
|
|
static void
|
|
filt_ustirwdetach(struct knote *kn)
|
|
{
|
|
struct ustir_softc *sc = kn->kn_hook;
|
|
int s;
|
|
|
|
s = splusb();
|
|
selremove_knote(&sc->sc_wr_sel, kn);
|
|
splx(s);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
filt_ustirwrite(struct knote *kn, long hint)
|
|
{
|
|
struct ustir_softc *sc = kn->kn_hook;
|
|
|
|
kn->kn_data = 0;
|
|
return sc->sc_direction != udir_input;
|
|
}
|
|
|
|
static const struct filterops ustirread_filtops = {
|
|
.f_flags = FILTEROP_ISFD,
|
|
.f_attach = NULL,
|
|
.f_detach = filt_ustirrdetach,
|
|
.f_event = filt_ustirread,
|
|
};
|
|
|
|
static const struct filterops ustirwrite_filtops = {
|
|
.f_flags = FILTEROP_ISFD,
|
|
.f_attach = NULL,
|
|
.f_detach = filt_ustirwdetach,
|
|
.f_event = filt_ustirwrite,
|
|
};
|
|
|
|
Static int
|
|
ustir_kqfilter(void *h, struct knote *kn)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
struct selinfo *sip;
|
|
int s;
|
|
|
|
switch (kn->kn_filter) {
|
|
case EVFILT_READ:
|
|
sip = &sc->sc_rd_sel;
|
|
kn->kn_fop = &ustirread_filtops;
|
|
break;
|
|
case EVFILT_WRITE:
|
|
sip = &sc->sc_wr_sel;
|
|
kn->kn_fop = &ustirwrite_filtops;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
|
|
kn->kn_hook = sc;
|
|
|
|
s = splusb();
|
|
selrecord_knote(sip, kn);
|
|
splx(s);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef USTIR_DEBUG_IOCTLS
|
|
Static int ustir_ioctl(void *h, u_long cmd, void *addr, int flag, struct lwp *l)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
int error;
|
|
unsigned int regnum;
|
|
usbd_status err;
|
|
uint8_t regdata = 0;
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
sc->sc_refcnt++;
|
|
|
|
error = 0;
|
|
switch (cmd) {
|
|
case USTIR_READ_REGISTER:
|
|
regnum = *(unsigned int *)addr;
|
|
|
|
if (regnum > STIR_MAX_REG) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
err = ustir_read_reg(sc, regnum, ®data);
|
|
|
|
DPRINTFN(10, ("%s: regget(%u) = %#x\n", __func__,
|
|
regnum, (unsigned int)regdata));
|
|
|
|
*(unsigned int *)addr = regdata;
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
printf("%s: register read failed: %s\n",
|
|
device_xname(sc->sc_dev),
|
|
usbd_errstr(err));
|
|
error = EIO;
|
|
}
|
|
break;
|
|
|
|
case USTIR_WRITE_REGISTER:
|
|
regnum = *(unsigned int *)addr;
|
|
regdata = (regnum >> 8) & 0xff;
|
|
regnum = regnum & 0xff;
|
|
|
|
if (regnum > STIR_MAX_REG) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
DPRINTFN(10, ("%s: regset(%u, %#x)\n", __func__,
|
|
regnum, (unsigned int)regdata));
|
|
|
|
err = ustir_write_reg(sc, regnum, regdata);
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
printf("%s: register write failed: %s\n",
|
|
device_xname(sc->sc_dev),
|
|
usbd_errstr(err));
|
|
error = EIO;
|
|
}
|
|
break;
|
|
|
|
case USTIR_DEBUG_LEVEL:
|
|
#ifdef USTIR_DEBUG
|
|
ustirdebug = *(int *)addr;
|
|
#endif
|
|
break;
|
|
|
|
case USTIR_DEBUG_OPERATION:
|
|
break;
|
|
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeupold(sc->sc_dev);
|
|
|
|
return error;
|
|
}
|
|
#endif
|
|
|
|
Static int
|
|
ustir_set_params(void *h, struct irda_params *p)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
struct ustir_speedrec const *speedblk;
|
|
int i;
|
|
|
|
DPRINTFN(0, ("%s: sc=%p, speed=%d ebofs=%d maxsize=%d\n", __func__,
|
|
sc, p->speed, p->ebofs, p->maxsize));
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
speedblk = NULL;
|
|
|
|
if (sc->sc_speedrec == NULL || p->speed != sc->sc_speedrec->speed) {
|
|
/* find speed */
|
|
for (i = 0; i < USTIR_NSPEEDS; i++) {
|
|
if (ustir_speeds[i].speed == p->speed) {
|
|
speedblk = &ustir_speeds[i];
|
|
goto found2;
|
|
}
|
|
}
|
|
/* no good value found */
|
|
return EINVAL;
|
|
found2:
|
|
;
|
|
}
|
|
if (p->maxsize != sc->sc_params.maxsize) {
|
|
if (p->maxsize > IRDA_MAX_FRAME_SIZE)
|
|
return EINVAL;
|
|
sc->sc_params.maxsize = p->maxsize;
|
|
}
|
|
|
|
sc->sc_params = *p;
|
|
|
|
if (speedblk != NULL) {
|
|
usbd_status err;
|
|
uint8_t regmode;
|
|
uint8_t regbrate;
|
|
|
|
sc->sc_speedrec = speedblk;
|
|
|
|
regmode = STIR_BRMODE_MODEREG(speedblk->config);
|
|
regbrate = STIR_BRMODE_BRATEREG(speedblk->config);
|
|
|
|
/*
|
|
* FFSPRST must be set to enable the FIFO.
|
|
*/
|
|
regmode |= STIR_RMODE_FFSPRST;
|
|
|
|
DPRINTFN(10, ("%s: setting BRATE = %x\n", __func__,
|
|
(unsigned int)regbrate));
|
|
err = ustir_write_reg(sc, STIR_REG_BRATE, regbrate);
|
|
if (err == USBD_NORMAL_COMPLETION) {
|
|
DPRINTFN(10, ("%s: setting MODE = %x\n", __func__,
|
|
(unsigned int)regmode));
|
|
err = ustir_write_reg(sc, STIR_REG_MODE, regmode);
|
|
}
|
|
if (err != USBD_NORMAL_COMPLETION) {
|
|
DPRINTFN(10, ("%s: error setting register: %s\n",
|
|
__func__, usbd_errstr(err)));
|
|
return EIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
ustir_get_speeds(void *h, int *speeds)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
|
|
DPRINTFN(0, ("%s: sc=%p\n", __func__, sc));
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
/* All these speeds are supported */
|
|
*speeds = IRDA_SPEED_4000000 |
|
|
IRDA_SPEED_1152000 |
|
|
IRDA_SPEED_576000 |
|
|
IRDA_SPEED_115200 |
|
|
IRDA_SPEED_57600 |
|
|
IRDA_SPEED_38400 |
|
|
IRDA_SPEED_19200 |
|
|
IRDA_SPEED_9600 |
|
|
IRDA_SPEED_2400;
|
|
|
|
return 0;
|
|
}
|
|
|
|
Static int
|
|
ustir_get_turnarounds(void *h, int *turnarounds)
|
|
{
|
|
struct ustir_softc *sc = h;
|
|
|
|
DPRINTFN(0, ("%s: sc=%p\n", __func__, sc));
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
/*
|
|
* Documentation is on the light side with respect to
|
|
* turnaround time for this device.
|
|
*/
|
|
*turnarounds = IRDA_TURNT_10000;
|
|
|
|
return 0;
|
|
}
|