NetBSD/dist/bind/doc/draft/draft-ietf-dnsop-serverid-04.txt

Network Working Group                                           S. Woolf
Internet-Draft                         Internet Systems Consortium, Inc.
Expires: September 14, 2005                                    D. Conrad
                                                           Nominum, Inc.
                                                          March 13, 2005


                Identifying an Authoritative Name Server
                      draft-ietf-dnsop-serverid-04

Status of this Memo

   This document is an Internet-Draft and is subject to all provisions
   of Section 3 of RFC 3667.  By submitting this Internet-Draft, each
   author represents that any applicable patent or other IPR claims of
   which he or she is aware have been or will be disclosed, and any of
   which he or she become aware will be disclosed, in accordance with
   RFC 3668.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on September 14, 2005.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   With the increased use of DNS anycast, load balancing, and other
   mechanisms allowing more than one DNS name server to share a single
   IP address, it is sometimes difficult to tell which of a pool of name
   servers has answered a particular query.  A standardized mechanism to
   determine the identity of a name server responding to a particular



Woolf & Conrad         Expires September 14, 2005               [Page 1]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


   query would be useful, particularly as a diagnostic aid.  Existing ad
   hoc mechanisms for addressing this concern are not adequate.  This
   document attempts to describe the common ad hoc solution to this
   problem, including its advantages and disadvantages, and to
   characterize an improved mechanism.














































Woolf & Conrad         Expires September 14, 2005               [Page 2]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


1.  Introduction

   With the increased use of DNS anycast, load balancing, and other
   mechanisms allowing more than one DNS name server to share a single
   IP address, it is sometimes difficult to tell which of a pool of name
   servers has answered a particular query.  A standardized mechanism to
   determine the identity of a name server responding to a particular
   query would be useful, particularly as a diagnostic aid.

   Unfortunately, existing ad-hoc mechanisms for providing such
   identification have some shortcomings, not the least of which is the
   lack of prior analysis of exactly how such a mechanism should be
   designed and deployed.  This document describes the existing
   convention used in one widely deployed implementation of the DNS
   protocol and discusses requirements for an improved solution to the
   problem.



































Woolf & Conrad         Expires September 14, 2005               [Page 3]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


2.  Rationale

   Identifying which name server is responding to queries is often
   useful, particularly in attempting to diagnose name server
   difficulties.  However, relying on the IP address of the name server
   has become more problematic due the deployment of various load
   balancing solutions, including the use of shared unicast addresses as
   documented in [RFC3258].

   An unfortunate side effect of these load balancing solutions, and
   some changes in management practices as the public Internet has
   evolved, is that traditional methods of determining which server is
   responding can be unreliable.  Specifically, non-DNS methods such as
   ICMP ping, TCP connections, or non-DNS UDP packets (such as those
   generated by tools such as "traceroute"), etc., can end up going to a
   different server than that which receives the DNS queries.

   There is a well-known and frequently-used technique for determining
   an identity for a nameserver more specific than the
   possibly-non-unique "server that answered my query".  The widespread
   use of the existing convention suggests a need for a documented,
   interoperable means of querying the identity of a nameserver that may
   be part of an anycast or load-balancing cluster.  At the same time,
   however, it also has some drawbacks that argue against standardizing
   it as it's been practiced so far.


























Woolf & Conrad         Expires September 14, 2005               [Page 4]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


3.  Existing Conventions

   Recent versions of the commonly deployed Berkeley Internet Name
   Domain implementation of the DNS protocol suite from the Internet
   Software Consortium [BIND] support a way of identifying a particular
   server via the use of a standard, if somewhat unusual, DNS query.
   Specifically, a query to a late model BIND server for a TXT resource
   record in class 3 (CHAOS) for the domain name "HOSTNAME.BIND." will
   return a string that can be configured by the name server
   administrator to provide a unique identifier for the responding
   server (defaulting to the value of a gethostname() call).  This
   mechanism, which is an extension of the BIND convention of using
   CHAOS class TXT RR queries to sub-domains of the "BIND." domain for
   version information, has been copied by several name server vendors.

   For reference, the other well-known name used by recent versions of
   BIND within the CHAOS class "BIND." domain is "VERSION.BIND."  A
   query for a TXT RR for this name will return an administratively
   defined string which defaults to the version of the server
   responding.  This is, however, not generally implemented by other
   vendors.

3.1  Advantages

   There are several valuable attributes to this mechanism, which
   account for its usefulness.
   1.  The "hostname.bind" query response mechanism is within the DNS
       protocol itself.  An identification mechanism that relies on the
       DNS protocol is more likely to be successful (although not
       guaranteed) in going to the same machine as a "normal" DNS query.
   2.  Since the identity information is requested and returned within
       the DNS protocol, it doesn't require allowing any other query
       mechanism to the server, such as holes in firewalls for
       otherwise-unallowed ICMP Echo requests.  Thus it does not require
       any special exceptions to site security policy.
   3.  It is simple to configure.  An administrator can easily turn on
       this feature and control the results of the relevant query.
   4.  It allows the administrator complete control of what information
       is given out in the response, minimizing passive leakage of
       implementation or configuration details.  Such details are often
       considered sensitive by infrastructure operators.

3.2  Disadvantages

   At the same time, there are some forbidding drawbacks to the
   VERSION.BIND mechanism that argue against standardizing it as it
   currently operates.




Woolf & Conrad         Expires September 14, 2005               [Page 5]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


   1.  It requires an additional query to correlate between the answer
       to a DNS query under normal conditions and the supposed identity
       of the server receiving the query.  There are a number of
       situations in which this simply isn't reliable.
   2.  It reserves an entire class in the DNS (CHAOS) for what amounts
       to one zone.  While CHAOS class is defined in [RFC1034] and
       [RFC1035], it's not clear that supporting it solely for this
       purpose is a good use of the namespace or of implementation
       effort.
   3.  It is implementation specific.  BIND is one DNS implementation.
       At the time of this writing, it is probably the most prevalent
       for authoritative servers.  This does not justify standardizing
       on its ad hoc solution to a problem shared across many operators
       and implementors.

   The first of the listed disadvantages is technically the most
   serious.  It argues for an attempt to design a good answer to the
   problem that "I need to know what nameserver is answering my
   queries", not simply a convenient one.
































Woolf & Conrad         Expires September 14, 2005               [Page 6]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


4.  Characteristics of an Implementation Neutral Convention

   The discussion above of advantages and disadvantages to the
   HOSTNAME.BIND mechanism suggest some requirements for a better
   solution to the server identification problem.  These are summarized
   here as guidelines for any effort to provide appropriate protocol
   extensions:
   1.  The mechanism adopted MUST be in-band for the DNS protocol.  That
       is, it needs to allow the query for the server's identifying
       information to be part of a normal, operational query.  It SHOULD
       also permit a separate, dedicated query for the server's
       identifying information.
   2.  The new mechanism SHOULD not require dedicated namespaces or
       other reserved values outside of the existing protocol mechanisms
       for these, i.e.  the OPT pseudo-RR.  In particular, it should not
       propagate the existing drawback of requiring support for a CLASS
       and top level domain in the authoritative server (or the querying
       tool) to be useful.
   3.  Support for the identification functionality SHOULD be easy to
       implement and easy to enable.  It MUST be easy to disable and
       SHOULD lend itself to access controls on who can query for it.
   4.  It should be possible to return a unique identifier for a server
       without requiring the exposure of information that may be
       non-public and considered sensitive by the operator, such as a
       hostname or unicast IP address maintained for administrative
       purposes.
   5.  The identification mechanism SHOULD NOT be
       implementation-specific.























Woolf & Conrad         Expires September 14, 2005               [Page 7]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


5.  IANA Considerations

   This document proposes no specific IANA action.  Protocol extensions,
   if any, to meet the requirements described are out of scope for this
   document.  Should such extensions be specified and adopted by normal
   IETF process, the specification will include appropriate guidance to
   IANA.












































Woolf & Conrad         Expires September 14, 2005               [Page 8]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


6.  Security Considerations

   Providing identifying information as to which server is responding to
   a particular query from a particular location in the Internet can be
   seen as information leakage and thus a security risk.  This motivates
   the suggestion above that a new mechanism for server identification
   allow the administrator to disable the functionality altogether or
   partially restrict availability of the data.  It also suggests that
   the serverid data should not be readily correlated with a hostname or
   unicast IP address that may be considered private to the nameserver
   operator's management infrastructure.

   Propagation of protocol or service meta-data can sometimes expose the
   application to denial of service or other attack.  As DNS is a
   critically important infrastructure service for the production
   Internet, extra care needs to be taken against this risk for
   designers, implementors, and operators of a new mechanism for server
   identification.

































Woolf & Conrad         Expires September 14, 2005               [Page 9]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


7.  Acknowledgements

   The technique for host identification documented here was initially
   implemented by Paul Vixie of the Internet Software Consortium in the
   Berkeley Internet Name Daemon package.  Comments and questions on
   earlier drafts were provided by Bob Halley, Brian Wellington, Andreas
   Gustafsson, Ted Hardie, Chris Yarnell, Randy Bush, and members of the
   ICANN Root Server System Advisory Committee.  The newest version
   takes a significantly different direction from previous versions,
   owing to discussion among contributors to the DNSOP working group and
   others, particularly Olafur Gudmundsson, Ed Lewis, Bill Manning, Sam
   Weiler, and Rob Austein.







































Woolf & Conrad         Expires September 14, 2005              [Page 10]

Internet-Draft    Identifying an Authoritative Name Server    March 2005


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2005).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.




Woolf & Conrad         Expires September 14, 2005              [Page 11]