NetBSD/sys/arch/arm32/include/pte.h

125 lines
4.5 KiB
C

/* $NetBSD: pte.h,v 1.8 1998/08/30 23:15:14 mark Exp $ */
/*
* Copyright (c) 1994 Mark Brinicombe.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the RiscBSD team.
* 4. The name "RiscBSD" nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY RISCBSD ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL RISCBSD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _ARM32_PTE_H_
#define _ARM32_PTE_H_
#define PDSHIFT 20 /* LOG2(NBPDR) */
#define NBPD (1 << PDSHIFT) /* bytes/page dir */
#define NPTEPD (NBPD / NBPG)
#ifndef _LOCORE
typedef int pd_entry_t; /* page directory entry */
typedef int pt_entry_t; /* page table entry */
#endif
#define PD_MASK 0xfff00000 /* page directory address bits */
#define PT_MASK 0x000ff000 /* page table address bits */
#define PG_FRAME 0xfffff000
/* The PT_SIZE definition is misleading... A page table is only 0x400
* bytes long. But since VM mapping can only be done to 0x1000 a single
* 1KB blocks cannot be steered to a va by itself. Therefore the
* pages tables are allocated in blocks of 4. i.e. if a 1 KB block
* was allocated for a PT then the other 3KB would also get mapped
* whenever the 1KB was mapped.
*/
#define PT_SIZE 0x1000
#define PD_SIZE 0x4000
/* Access permissions for L1 sections and L2 pages */
#define AP_KR 0x00
#define AP_KRW 0x01
#define AP_KRWUR 0x02
#define AP_KRWURW 0x03
#define AP_W 0x01
#define AP_U 0x02
/* Physical bits in a pte */
#define PT_B 0x04 /* Phys - Buffered (write) */
#define PT_C 0x08 /* Phys - Cacheable */
#define PT_U 0x10 /* Phys - Updateable */
#define PT_CACHEABLE (PT_B | PT_C)
/* Virtual bits in a pte (maintained in software) */
#define PT_M 0x01 /* Virt - Modified */
#define PT_H 0x02 /* Virt - Handled (Used) */
#define PT_W 0x40 /* Virt - Wired */
#define PT_Wr 0x10 /* Virt / Phys Write */
#define PT_Us 0x20 /* Virt / Phys User */
/* access permissions for L2 pages (all sub pages have the same perms) */
#define PT_AP(x) ((x << 10) | (x << 8) | (x << 6) | (x << 4))
/* shift for access permissions in a L1 section mapping */
#define AP_SECTION_SHIFT 10
/* Page table types and masks */
#define L1_PAGE 0x01 /* L1 page table mapping */
#define L1_SECTION 0x02 /* L1 section mapping */
#define L1_MASK 0x03 /* Mask for L1 entry type */
#define L2_LPAGE 0x01 /* L2 large page (64KB) */
#define L2_SPAGE 0x02 /* L2 small page (4KB) */
#define L2_MASK 0x03 /* Mask for L2 entry type */
#define L2_INVAL 0x00 /* L2 invalid type */
/* PTE construction macros */
#define L2_LPTE(p, a, f) ((p) | PT_AP(a) | L2_LPAGE | (f))
#define L2_SPTE(p, a, f) ((p) | PT_AP(a) | L2_SPAGE | (f))
#define L2_PTE(p, a) L2_SPTE((p), (a), PT_CACHEABLE)
#define L2_PTE_NC(p, a) L2_SPTE((p), (a), PT_B)
#define L2_PTE_NC_NB(p, a) L2_SPTE((p), (a), 0)
#define L1_SECPTE(p, a, f) ((p) | ((a) << AP_SECTION_SHIFT) | (f) \
| L1_SECTION | PT_U)
#define L1_PTE(p) ((p) | 0x00 | L1_PAGE | PT_U)
#define L1_SEC(p, c) L1_SECPTE((p), AP_KRW, (c))
#define L1_SEC_SIZE (1 << PDSHIFT)
#define L2_LPAGE_SIZE (NBPG * 16)
/* Domain types */
#define DOMAIN_FAULT 0x00
#define DOMAIN_CLIENT 0x01
#define DOMAIN_RESERVED 0x02
#define DOMAIN_MANAGER 0x03
#endif
/* End of pte.h */