NetBSD/sys/dev/qbus/ts.c

1064 lines
26 KiB
C

/* $NetBSD: ts.c,v 1.27 2009/01/13 13:35:53 yamt Exp $ */
/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)tmscp.c 7.16 (Berkeley) 5/9/91
*/
/*
* sccsid = "@(#)tmscp.c 1.24 (ULTRIX) 1/21/86";
*/
/************************************************************************
* *
* Licensed from Digital Equipment Corporation *
* Copyright (c) *
* Digital Equipment Corporation *
* Maynard, Massachusetts *
* 1985, 1986 *
* All rights reserved. *
* *
* The Information in this software is subject to change *
* without notice and should not be construed as a commitment *
* by Digital Equipment Corporation. Digital makes no *
* representations about the suitability of this software for *
* any purpose. It is supplied "As Is" without expressed or *
* implied warranty. *
* *
* If the Regents of the University of California or its *
* licensees modify the software in a manner creating *
* derivative copyright rights, appropriate copyright *
* legends may be placed on the derivative work in addition *
* to that set forth above. *
* *
************************************************************************/
/*
* TSV05/TS05 device driver, written by Bertram Barth.
*
* should be TS11 compatible (untested)
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ts.c,v 1.27 2009/01/13 13:35:53 yamt Exp $");
#undef TSDEBUG
/*
* TODO:
*
* Keep track of tape position so that lseek et al works.
* Use tprintf to inform the user, not the system console.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/buf.h>
#include <sys/bufq.h>
#include <sys/conf.h>
#include <sys/errno.h>
#include <sys/file.h>
#include <sys/syslog.h>
#include <sys/ioctl.h>
#include <sys/mtio.h>
#include <sys/uio.h>
#include <sys/proc.h>
#include <sys/bus.h>
#include <dev/qbus/ubareg.h>
#include <dev/qbus/ubavar.h>
#include <dev/qbus/tsreg.h>
#include "ioconf.h"
struct ts {
struct cmd cmd; /* command packet */
struct chr chr; /* characteristics packet */
struct status status; /* status packet */
};
/*
* Software status, per controller.
* also status per tape-unit, since only one unit per controller
* (thus we have no struct ts_info)
*/
struct ts_softc {
device_t sc_dev; /* Autoconf ... */
struct uba_softc *sc_uh; /* the parent UBA */
struct uba_unit sc_unit; /* Struct common for UBA to talk */
struct evcnt sc_intrcnt; /* Interrupt counting */
struct ubinfo sc_ui; /* mapping info for struct ts */
struct uba_unit sc_uu; /* Struct for UBA to communicate */
bus_space_tag_t sc_iot;
bus_addr_t sc_ioh;
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmam;
volatile struct ts *sc_vts; /* Memory address of ts struct */
struct ts *sc_bts; /* Unibus address of ts struct */
int sc_type; /* TS11 or TS05? */
short sc_waddr; /* Value to write to TSDB */
struct bufq_state *sc_bufq; /* pending I/O requests */
short sc_mapped; /* Unibus map allocated ? */
short sc_state; /* see below: ST_xxx */
short sc_rtc; /* retry count for lcmd */
short sc_openf; /* lock against multiple opens */
short sc_liowf; /* last operation was write */
struct buf ts_cbuf; /* internal cmd buffer (for ioctls) */
};
#define TS_WCSR(csr, val) \
bus_space_write_2(sc->sc_iot, sc->sc_ioh, csr, val)
#define TS_RCSR(csr) \
bus_space_read_2(sc->sc_iot, sc->sc_ioh, csr)
#define LOWORD(x) ((int)(x) & 0xffff)
#define HIWORD(x) (((int)(x) >> 16) & 0x3f)
#define TYPE_TS11 0
#define TYPE_TS05 1
#define TYPE_TU80 2
#define TS_INVALID 0
#define TS_INIT 1
#define TS_RUNNING 2
#define TS_FASTREPOS 3
static void tsintr(void *);
static void tsinit(struct ts_softc *);
static void tscommand(struct ts_softc *, dev_t, int, int);
static int tsstart(struct ts_softc *, int);
static void tswchar(struct ts_softc *);
static bool tsreset(struct ts_softc *);
static int tsmatch(device_t, cfdata_t, void *);
static void tsattach(device_t, device_t, void *);
static int tsready(struct uba_unit *);
CFATTACH_DECL_NEW(ts, sizeof(struct ts_softc),
tsmatch, tsattach, NULL, NULL);
dev_type_open(tsopen);
dev_type_close(tsclose);
dev_type_read(tsread);
dev_type_write(tswrite);
dev_type_ioctl(tsioctl);
dev_type_strategy(tsstrategy);
dev_type_dump(tsdump);
const struct bdevsw ts_bdevsw = {
tsopen, tsclose, tsstrategy, tsioctl, tsdump, nosize, D_TAPE
};
const struct cdevsw ts_cdevsw = {
tsopen, tsclose, tsread, tswrite, tsioctl,
nostop, notty, nopoll, nommap, nokqfilter, D_TAPE
};
/* Bits in minor device */
#define TS_UNIT(dev) (minor(dev)&03)
#define TS_HIDENSITY 010
#define TS_PRI LOG_INFO
/*
* Probe for device. If found, try to raise an interrupt.
*/
int
tsmatch(device_t parent, cfdata_t match, void *aux)
{
struct device tsdev;
struct ts_softc ssc;
struct ts_softc *sc = &ssc;
struct uba_attach_args *ua = aux;
int i;
sc->sc_iot = ua->ua_iot;
sc->sc_ioh = ua->ua_ioh;
sc->sc_mapped = 0;
sc->sc_dev = &tsdev;
sc->sc_uh = device_private(parent);
strcpy(sc->sc_dev->dv_xname, "ts");
/* Try to reset the device */
for (i = 0; i < 3; i++) {
if (tsreset(sc))
break;
}
if (i == 3)
return 0;
tsinit(sc);
tswchar(sc); /* write charact. to enable interrupts */
/* completion of this will raise the intr. */
DELAY(1000000); /* Wait for interrupt */
ubmemfree(sc->sc_uh, &sc->sc_ui);
return 1;
}
/*
*/
void
tsattach(device_t parent, device_t self, void *aux)
{
struct ts_softc *sc = device_private(self);
struct uba_attach_args *ua = aux;
int error;
const char *t;
sc->sc_dev = self;
sc->sc_uh = device_private(parent);
sc->sc_iot = ua->ua_iot;
sc->sc_ioh = ua->ua_ioh;
sc->sc_dmat = ua->ua_dmat;
sc->sc_uu.uu_dev = self;
sc->sc_uu.uu_ready = tsready;
tsinit(sc); /* reset and map */
error = bus_dmamap_create(sc->sc_dmat, (64*1024), 16, (64*1024),
0, BUS_DMA_NOWAIT, &sc->sc_dmam);
if (error) {
aprint_error(": failed create DMA map %d\n", error);
return;
}
bufq_alloc(&sc->sc_bufq, "fcfs", 0);
/*
* write the characteristics (again)
*/
sc->sc_state = TS_INIT; /* tsintr() checks this ... */
tswchar(sc);
if (tsleep(sc, PRIBIO, "tsattach", 100)) {
aprint_error(": failed SET CHARACTERISTICS\n");
return;
}
sc->sc_state = TS_RUNNING;
if (sc->sc_uh->uh_type == UBA_UBA) {
if (sc->sc_vts->status.xst2 & TS_SF_TU80) {
sc->sc_type = TYPE_TU80;
t = "TU80";
} else {
sc->sc_type = TYPE_TS11;
t = "TS11";
}
} else {
sc->sc_type = TYPE_TS05;
t = "TS05";
}
aprint_normal(": %s\n", t);
aprint_normal_dev(sc->sc_dev,
"rev %d, extended features %s, transport %s\n",
(sc->sc_vts->status.xst2 & TS_SF_MCRL) >> 2,
(sc->sc_vts->status.xst2 & TS_SF_EFES ? "enabled" : "disabled"),
(TS_RCSR(TSSR) & TS_OFL ? "offline" : "online"));
uba_intr_establish(ua->ua_icookie, ua->ua_cvec, tsintr,
sc, &sc->sc_intrcnt);
evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt,
device_xname(sc->sc_dev), "intr");
}
/*
* Initialize a TS device. Set up UBA mapping registers,
* initialize data structures, what else ???
*/
void
tsinit(struct ts_softc *sc)
{
if (sc->sc_mapped == 0) {
/*
* Map the communications area and command and message
* buffer into Unibus address space.
*/
sc->sc_ui.ui_size = sizeof(struct ts);
if (ubmemalloc(sc->sc_uh, &sc->sc_ui, UBA_CANTWAIT))
return;
sc->sc_vts = (void *)sc->sc_ui.ui_vaddr;
sc->sc_bts = (void *)sc->sc_ui.ui_baddr;
sc->sc_waddr = sc->sc_ui.ui_baddr |
((sc->sc_ui.ui_baddr >> 16) & 3);
sc->sc_mapped = 1;
}
tsreset(sc);
}
/*
* Execute a (ioctl) command on the tape drive a specified number of times.
* This routine sets up a buffer and calls the strategy routine which
* issues the command to the controller.
*/
void
tscommand(struct ts_softc *sc, dev_t dev, int cmd, int count)
{
struct buf *bp;
#ifdef TSDEBUG
printf("tscommand (%x, %d)\n", cmd, count);
#endif
bp = &sc->ts_cbuf;
mutex_enter(&bufcache_lock);
while (bp->b_cflags & BC_BUSY) {
/*
* This special check is because BC_BUSY never
* gets cleared in the non-waiting rewind case. ???
*/
if (bp->b_bcount == 0 && (bp->b_oflags & BO_DONE))
break;
if (bbusy(bp, false, 0, NULL) == 0)
break;
/* check MOT-flag !!! */
}
bp->b_flags = B_READ;
mutex_exit(&bufcache_lock);
/*
* Load the buffer. The b_count field gets used to hold the command
* count. the b_resid field gets used to hold the command mneumonic.
* These 2 fields are "known" to be "safe" to use for this purpose.
* (Most other drivers also use these fields in this way.)
*/
bp->b_dev = dev;
bp->b_bcount = count;
bp->b_resid = cmd;
bp->b_blkno = 0;
bp->b_oflags = 0;
bp->b_objlock = &buffer_lock;
tsstrategy(bp);
/*
* In case of rewind from close, don't wait.
* This is the only case where count can be 0.
*/
if (count == 0)
return;
biowait(bp);
mutex_enter(&bufcache_lock);
cv_broadcast(&bp->b_busy);
bp->b_cflags = 0;
mutex_exit(&bufcache_lock);
}
/*
* Start an I/O operation on TS05 controller
*/
int
tsstart(struct ts_softc *sc, int isloaded)
{
struct buf *bp;
int cmd;
bp = bufq_peek(sc->sc_bufq);
if (bp == NULL) {
return 0;
}
#ifdef TSDEBUG
printf("buf: %p bcount %ld blkno %d\n", bp, bp->b_bcount, bp->b_blkno);
#endif
/*
* Check if command is an ioctl or not (ie. read or write).
* If it's an ioctl then just set the flags for later use;
* For other commands attempt to setup a buffer pointer.
*/
if (bp == &sc->ts_cbuf) {
switch ((int)bp->b_resid) {
case MTWEOF:
cmd = TS_CMD_WTM;
break;
case MTFSF:
cmd = TS_CMD_STMF;
sc->sc_vts->cmd.cw1 = bp->b_bcount;
break;
case MTBSF:
cmd = TS_CMD_STMR;
sc->sc_vts->cmd.cw1 = bp->b_bcount;
break;
case MTFSR:
cmd = TS_CMD_SRF;
sc->sc_vts->cmd.cw1 = bp->b_bcount;
break;
case MTBSR:
cmd = TS_CMD_SRR;
sc->sc_vts->cmd.cw1 = bp->b_bcount;
break;
case MTREW:
cmd = TS_CMD_RWND;
break;
case MTOFFL:
cmd = TS_CMD_RWUL;
break;
case MTNOP:
cmd = TS_CMD_STAT;
break;
default:
aprint_error_dev(sc->sc_dev, "bad ioctl %d\n",
(int)bp->b_resid);
/* Need a no-op. get status */
cmd = TS_CMD_STAT;
} /* end switch (bp->b_resid) */
} else {
if (isloaded == 0) {
/*
* now we try to map the buffer into uba map space (???)
*/
if (bus_dmamap_load(sc->sc_dmat, sc->sc_dmam,
bp->b_data,
bp->b_bcount, bp->b_proc, BUS_DMA_NOWAIT)) {
uba_enqueue(&sc->sc_uu);
return 0;
}
sc->sc_rtc = 0;
}
sc->sc_vts->cmd.cw1 = LOWORD(sc->sc_dmam->dm_segs[0].ds_addr);
sc->sc_vts->cmd.cw2 = HIWORD(sc->sc_dmam->dm_segs[0].ds_addr);
sc->sc_vts->cmd.cw3 = bp->b_bcount;
bp->b_error = 0; /* Used for error count */
#ifdef TSDEBUG
printf("tsstart-1: err %d\n", bp->b_error);
#endif
if (bp->b_flags & B_READ)
cmd = TS_CMD_RNF;
else
cmd = TS_CMD_WD;
}
/*
* Now that the command-buffer is setup, give it to the controller
*/
sc->sc_vts->cmd.cmdr = TS_CF_ACK | TS_CF_IE | cmd;
#ifdef TSDEBUG
printf("tsstart: sending cmdr %x\n", sc->sc_vts->cmd.cmdr);
#endif
TS_WCSR(TSDB, sc->sc_waddr);
return 1;
}
/*
* Called when there are free uba resources.
*/
int
tsready(struct uba_unit *uu)
{
struct ts_softc *sc = device_private(uu->uu_dev);
struct buf *bp = bufq_peek(sc->sc_bufq);
if (bus_dmamap_load(sc->sc_dmat, sc->sc_dmam, bp->b_data,
bp->b_bcount, bp->b_proc, BUS_DMA_NOWAIT))
return 0;
tsstart(sc, 1);
return 1;
}
/*
* initialize the controller by sending WRITE CHARACTERISTICS command.
* contents of command- and message-buffer are assembled during this
* function.
*/
void
tswchar(struct ts_softc *sc)
{
/*
* assemble and send "WRITE CHARACTERISTICS" command
*/
sc->sc_vts->cmd.cmdr = TS_CF_ACK | TS_CF_IE | TS_CMD_WCHAR;
sc->sc_vts->cmd.cw1 = LOWORD(&sc->sc_bts->chr);
sc->sc_vts->cmd.cw2 = HIWORD(&sc->sc_bts->chr);
sc->sc_vts->cmd.cw3 = 010; /* size of charact.-data */
sc->sc_vts->chr.sadrl = LOWORD(&sc->sc_bts->status);
sc->sc_vts->chr.sadrh = HIWORD(&sc->sc_bts->status);
sc->sc_vts->chr.onesix = (sc->sc_type == TYPE_TS05 ? 020 : 016);
sc->sc_vts->chr.chrw = TS_WC_ESS;
sc->sc_vts->chr.xchrw = TS_WCX_HSP|TS_WCX_RBUF|TS_WCX_WBUF;
TS_WCSR(TSDB, sc->sc_waddr);
}
/*
* Reset the TS11. Return 1 if failed, 0 if succeeded.
*/
bool
tsreset(struct ts_softc *sc)
{
int timeout;
/*
* reset ctlr by writing into TSSR, then write characteristics
*/
timeout = 0; /* timeout in 10 seconds */
TS_WCSR(TSSR, 0); /* start initialization */
while ((TS_RCSR(TSSR) & TS_SSR) == 0) {
DELAY(10000);
if (timeout++ > 1000)
return false;
}
return true;
}
static void
prtstat(struct ts_softc *sc, int sr)
{
char buf[100];
snprintb(buf, sizeof(buf), TS_TSSR_BITS, sr);
aprint_normal_dev(sc->sc_dev, "TSSR=%s\n", buf);
snprintb(buf, sizeof(buf), TS_XST0_BITS, sc->sc_vts->status.xst0);
aprint_normal_dev(sc->sc_dev, "XST0=%s\n", buf);
}
/*
* TSV05/TS05 interrupt routine
*/
static void
tsintr(void *arg)
{
struct ts_softc *sc = arg;
struct buf *bp;
unsigned short sr = TS_RCSR(TSSR); /* save TSSR */
unsigned short mh = sc->sc_vts->status.hdr; /* and msg-header */
/* clear the message header ??? */
short ccode = sc->sc_vts->cmd.cmdr & TS_CF_CCODE;
bp = bufq_peek(sc->sc_bufq);
#ifdef TSDEBUG
{
char buf[100];
snprintb(buf, sizeof(buf), TS_TSSR_BITS, sr);
printf("tsintr: sr %x mh %x\n", sr, mh);
printf("srbits: %s\n", buf);
}
#endif
/*
* There are two different things which can (and should) be checked:
* the actual (internal) state and the device's result (tssr/msg.hdr)
*
* For each state there's only one "normal" interrupt. Anything else
* has to be checked more intensively. Thus in a first run according
* to the internal state the expected interrupt is checked/handled.
*
* In a second run the remaining (not yet handled) interrupts are
* checked according to the drive's result.
*/
switch (sc->sc_state) {
case TS_INVALID:
/*
* Ignore unsolicited interrupts.
*/
log(LOG_WARNING, "%s: stray intr [%x,%x]\n",
device_xname(sc->sc_dev), sr, mh);
return;
case TS_INIT:
/*
* Init phase ready.
*/
wakeup(sc);
return;
case TS_RUNNING:
case TS_FASTREPOS:
/*
* Here we expect interrupts indicating the end of
* commands or indicating problems.
*/
/*
* Anything else is handled outside this switch ...
*/
break;
default:
aprint_error_dev(sc->sc_dev,
"unexpected interrupt during state %d [%x,%x]\n",
sc->sc_state, sr, mh);
return;
}
/*
* now we check the termination class.
*/
switch (sr & TS_TC) {
case TS_TC_NORM:
/*
* Normal termination -- The operation is completed
* witout incident.
*/
if (sc->sc_state == TS_FASTREPOS) {
#ifdef TSDEBUG
printf("Fast repos interrupt\n");
#endif
/* Fast repos succeeded, start normal data xfer */
sc->sc_state = TS_RUNNING;
tsstart(sc, 1);
return;
}
sc->sc_liowf = (ccode == TS_CC_WRITE);
break;
case TS_TC_ATTN:
/*
* Attention condition -- this code indicates that the
* drive has undergone a status change, such as going
* off-line or coming on-line.
* (Without EAI enabled, no Attention interrupts occur.
* drive status changes are signaled by the VCK flag.)
*/
return;
case TS_TC_TSA:
/*
* Tape Status Alert -- A status condition is encountered
* that may have significance to the program. Bits of
* interest in the extended status registers include
* TMK, EOT and RLL.
*/
#ifdef TSDEBUG
{
char buf[100];
snprintb(buf, sizeof(buf),
TS_XST0_BITS, sc->sc_vts->status.xst0);
printf("TSA: sr %x bits %s\n",
sc->sc_vts->status.xst0, buf);
}
#endif
if (sc->sc_vts->status.xst0 & TS_SF_TMK) {
#ifdef TSDEBUG
printf(("Tape Mark detected"));
#endif
/* Read to end-of-file. No error. */
break;
}
if (sc->sc_vts->status.xst0 & TS_SF_EOT) {
/* End of tape. Bad. */
#ifdef TSDEBUG
printf("TS_TC_TSA: EOT\n");
#endif
if (bp != NULL)
bp->b_error = EIO;
break;
}
if (sc->sc_vts->status.xst0 & TS_SF_RLS)
break;
#ifndef TSDEBUG
{
char buf[100];
snprintb(buf, sizeof(buf),
TS_XST0_BITS, sc->sc_vts->status.xst0);
printf("TSA: sr %x bits %s\n",
sc->sc_vts->status.xst0, buf);
}
#endif
break;
case TS_TC_FR:
/*
* Function Reject -- The specified function was not
* initiated. Bits of interest include OFL, VCK, BOT,
* WLE, ILC and ILA.
*/
if (sr & TS_OFL)
printf("tape is off-line.\n");
#ifdef TSDEBUG
{
char buf[100];
snprintb(buf, sizeof(buf),
TS_XST0_BITS, sc->sc_vts->status.xst0);
printf("FR: sr %x bits %s\n",
sc->sc_vts->status.xst0, buf);
}
#endif
if (sc->sc_vts->status.xst0 & TS_SF_VCK)
printf("Volume check\n");
if (sc->sc_vts->status.xst0 & TS_SF_BOT)
printf("Start of tape.\n");
if (sc->sc_vts->status.xst0 & TS_SF_WLE)
printf("Write Lock Error\n");
if (sc->sc_vts->status.xst0 & TS_SF_EOT)
printf("End of tape.\n");
break;
case TS_TC_TPD:
/*
* Recoverable Error -- Tape position is a record beyond
* what its position was when the function was initiated.
* Suggested recovery procedure is to log the error and
* issue the appropriate retry command.
*
* Do a fast repositioning one record back.
*/
sc->sc_state = TS_FASTREPOS;
#ifdef TSDEBUG
printf("TS_TC_TPD: errcnt %d\n", sc->sc_rtc);
#endif
if (sc->sc_rtc++ == 8) {
aprint_error_dev(sc->sc_dev, "failed 8 retries\n");
prtstat(sc, sr);
if (bp != NULL)
bp->b_error = EIO;
break;
}
sc->sc_vts->cmd.cmdr = TS_CF_ACK | TS_CF_IE | TS_CMD_SRR;
sc->sc_vts->cmd.cw1 = 1;
TS_WCSR(TSDB, sc->sc_waddr);
return;
case TS_TC_TNM:
/*
* Recoverable Error -- Tape position has not changed.
* Suggested recovery procedure is to log the error and
* reissue the original command.
*/
if (sc->sc_rtc++ == 8) {
aprint_error_dev(sc->sc_dev, "failed 8 retries\n");
prtstat(sc, sr);
if (bp != NULL)
bp->b_error = EIO;
break;
}
tsstart(sc, 1);
return;
case TS_TC_TPL:
/*
* Unrecoverable Error -- Tape position has been lost.
* No valid recovery procedures exist unless the tape
* has labels or sequence numbers.
*/
aprint_error_dev(sc->sc_dev, "tape position lost\n");
if (bp != NULL)
bp->b_error = EIO;
break;
case TS_TC_FCE:
/*
* Fatal subsytem Error -- The subsytem is incapable
* of properly performing commands, or at least its
* integrity is seriously questionable. Refer to the
* fatal class code field in the TSSR register for
* additional information on the type of fatal error.
*/
aprint_error_dev(sc->sc_dev, "fatal controller error\n");
prtstat(sc, sr);
break;
default:
aprint_error_dev(sc->sc_dev,
"error 0x%x, resetting controller\n", sr & TS_TC);
tsreset(sc);
}
if ((bp = bufq_get(sc->sc_bufq)) != NULL) {
#ifdef TSDEBUG
printf("tsintr2: que %p\n", bufq_peek(sc->sc_bufq));
#endif
if (bp != &sc->ts_cbuf) { /* no ioctl */
bus_dmamap_unload(sc->sc_dmat, sc->sc_dmam);
uba_done(sc->sc_uh);
}
bp->b_resid = sc->sc_vts->status.rbpcr;
biodone (bp);
}
tsstart(sc, 0);
}
/*
* Open a ts device and set the unit online. If the controller is not
* in the run state, call init to initialize the ts controller first.
*/
int
tsopen(dev_t dev, int flag, int type, struct lwp *l)
{
struct ts_softc *sc = device_lookup_private(&ts_cd, TS_UNIT(dev));
if (sc == NULL)
return ENXIO;
if (sc->sc_state < TS_RUNNING)
return ENXIO;
if (sc->sc_openf)
return EBUSY;
sc->sc_openf = 1;
/*
* check if transport is really online.
* (without attention-interrupts enabled, we really don't know
* the actual state of the transport. Thus we call get-status
* (ie. MTNOP) once and check the actual status.)
*/
if (TS_RCSR(TSSR) & TS_OFL) {
uprintf("%s: transport is offline.\n", device_xname(sc->sc_dev));
sc->sc_openf = 0;
return EIO; /* transport is offline */
}
tscommand(sc, dev, MTNOP, 1);
if ((flag & FWRITE) && (sc->sc_vts->status.xst0 & TS_SF_WLK)) {
uprintf("%s: no write ring.\n", device_xname(sc->sc_dev));
sc->sc_openf = 0;
return EROFS;
}
if (sc->sc_vts->status.xst0 & TS_SF_VCK) {
sc->sc_vts->cmd.cmdr = TS_CF_CVC|TS_CF_ACK;
TS_WCSR(TSDB, sc->sc_waddr);
}
tscommand(sc, dev, MTNOP, 1);
#ifdef TSDEBUG
{
char buf[100];
snprintb(buf, sizeof(buf),
TS_XST0_BITS, sc->sc_vts->status.xst0);
printf("tsopen: xst0 %s\n", buf);
}
#endif
sc->sc_liowf = 0;
return 0;
}
/*
* Close tape device.
*
* If tape was open for writing or last operation was
* a write, then write two EOF's and backspace over the last one.
* Unless this is a non-rewinding special file, rewind the tape.
*
* Make the tape available to others, by clearing openf flag.
*/
int
tsclose(dev_t dev, int flag, int type, struct lwp *l)
{
struct ts_softc *sc = device_lookup_private(&ts_cd, TS_UNIT(dev));
if (flag == FWRITE || ((flag & FWRITE) && sc->sc_liowf)) {
/*
* We are writing two tape marks (EOT), but place the tape
* before the second one, so that another write operation
* will overwrite the second one and leave and EOF-mark.
*/
tscommand(sc, dev, MTWEOF, 1); /* Write Tape Mark */
tscommand(sc, dev, MTWEOF, 1); /* Write Tape Mark */
tscommand(sc, dev, MTBSF, 1); /* Skip Tape Marks Reverse */
}
if ((dev & T_NOREWIND) == 0)
tscommand(sc, dev, MTREW, 0);
sc->sc_openf = 0;
sc->sc_liowf = 0;
return 0;
}
/*
* Manage buffers and perform block mode read and write operations.
*/
void
tsstrategy(struct buf *bp)
{
struct ts_softc *sc = device_lookup_private(&ts_cd, TS_UNIT(bp->b_dev));
bool empty;
int s;
#ifdef TSDEBUG
printf("buf: %p bcount %ld blkno %d\n", bp, bp->b_bcount, bp->b_blkno);
#endif
s = splbio ();
empty = (bufq_peek(sc->sc_bufq) == NULL);
bufq_put(sc->sc_bufq, bp);
if (empty)
tsstart(sc, 0);
splx(s);
}
/*
* Catch ioctl commands, and call the "command" routine to do them.
*/
int
tsioctl(dev_t dev,
u_long cmd,
void *data,
int flag,
struct lwp *l)
{
struct buf *bp;
struct ts_softc * const sc = device_lookup_private(&ts_cd, TS_UNIT(dev));
struct mtop *mtop; /* mag tape cmd op to perform */
struct mtget *mtget; /* mag tape struct to get info in */
int callcount; /* number of times to call routine */
int scount; /* number of files/records to space */
int spaceop = 0; /* flag for skip/space operation */
int error = 0;
#ifdef TSDEBUG
printf("tsioctl (%x, %lx, %p, %d)\n", dev, cmd, data, flag);
#endif
bp = &sc->ts_cbuf;
switch (cmd) {
case MTIOCTOP: /* do a mag tape op */
mtop = (struct mtop *)data;
switch (mtop->mt_op) {
case MTWEOF: /* write an end-of-file record */
callcount = mtop->mt_count;
scount = 1;
break;
case MTFSR: /* forward space record */
case MTBSR: /* backward space record */
spaceop = 1;
case MTFSF: /* forward space file */
case MTBSF: /* backward space file */
callcount = 1;
scount = mtop->mt_count;
break;
case MTREW: /* rewind */
case MTOFFL: /* rewind and put the drive offline */
case MTNOP: /* no operation, sets status only */
callcount = 1;
scount = 1; /* wait for this rewind */
break;
case MTRETEN: /* retension */
case MTERASE: /* erase entire tape */
case MTEOM: /* forward to end of media */
case MTNBSF: /* backward space to begin of file */
case MTCACHE: /* enable controller cache */
case MTNOCACHE: /* disable controller cache */
case MTSETBSIZ: /* set block size; 0 for variable */
case MTSETDNSTY: /* set density code for current mode */
printf("ioctl %d not implemented.\n", mtop->mt_op);
return (ENXIO);
default:
#ifdef TSDEBUG
printf("invalid ioctl %d\n", mtop->mt_op);
#endif
return (ENXIO);
} /* switch (mtop->mt_op) */
if (callcount <= 0 || scount <= 0) {
#ifdef TSDEBUG
printf("invalid values %d/%d\n", callcount, scount);
#endif
return (EINVAL);
}
do {
tscommand(sc, dev, mtop->mt_op, scount);
if (spaceop && bp->b_resid) {
#ifdef TSDEBUG
printf(("spaceop didn't complete\n"));
#endif
return (EIO);
}
if (bp->b_error != 0) {
#ifdef TSDEBUG
printf("error in ioctl %d\n", mtop->mt_op);
#endif
break;
}
} while (--callcount > 0);
if (bp->b_error != 0)
error = bp->b_error;
return (error);
case MTIOCGET: /* get tape status */
mtget = (struct mtget *)data;
mtget->mt_type = MT_ISTS;
mtget->mt_dsreg = TS_RCSR(TSSR);
mtget->mt_erreg = sc->sc_vts->status.xst0;
mtget->mt_resid = 0; /* ??? */
mtget->mt_density = 0; /* ??? */
break;
case MTIOCIEOT: /* ignore EOT error */
#ifdef TSDEBUG
printf(("MTIOCIEOT not implemented.\n"));
#endif
return (ENXIO);
case MTIOCEEOT: /* enable EOT error */
#ifdef TSDEBUG
printf(("MTIOCEEOT not implemented.\n"));
#endif
return (ENXIO);
default:
#ifdef TSDEBUG
printf("invalid ioctl cmd 0x%lx\n", cmd);
#endif
return (ENXIO);
}
return (0);
}
/*
*
*/
int
tsread(dev_t dev, struct uio *uio, int flag)
{
return (physio (tsstrategy, NULL, dev, B_READ, minphys, uio));
}
/*
*
*/
int
tswrite(dev_t dev, struct uio *uio, int flag)
{
return (physio (tsstrategy, NULL, dev, B_WRITE, minphys, uio));
}
/*
*
*/
int
tsdump(dev_t dev, daddr_t blkno, void *va, size_t size)
{
return EIO;
}