NetBSD/sys/dev/isa/itesio_isavar.h

161 lines
5.7 KiB
C

/* $NetBSD: itesio_isavar.h,v 1.6 2008/04/26 19:01:53 xtraeme Exp $ */
/* $OpenBSD: itvar.h,v 1.2 2003/11/05 20:57:10 grange Exp $ */
/*
* Copyright (c) 2006-2007 Juan Romero Pardines <xtraeme@netbsd.org>
* Copyright (c) 2003 Julien Bordet <zejames@greyhats.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITD TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITD TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_ISA_ITESIO_ISAVAR_H
#define _DEV_ISA_ITESIO_ISAVAR_H
#define IT_NUM_SENSORS 15
/* Super I/O Configuration Registers */
#define ITESIO_ADDR 0 /* Address Port = 0x2e */
#define ITESIO_DATA 1 /* Data Port = 0x2f */
#define ITESIO_LDNSEL 0x07 /* Logical Device Number Selection */
#define ITESIO_EC_LDN 0x04 /* EC Logical Device Number */
#define ITESIO_EC_MSB 0x60 /* EC Base Address (MSB) */
#define ITESIO_EC_LSB 0x61 /* EC Base Address (LSB) */
#define ITESIO_WDT_LDN 0x07 /* Watchdog Logical Device Number */
#define ITESIO_WDT_CTL 0x71 /* Watchdog Control Register */
#define ITESIO_WDT_CNF 0x72 /* Watchdog Configuration Register */
#define ITESIO_WDT_CNF_SECS (1<<7) /* Use seconds for the timer */
#define ITESIO_WDT_CNF_KRST (1<<6) /* Enable KRST */
#define ITESIO_WDT_CNF_PWROK (1<<4) /* Enable PWROK */
#define ITESIO_WDT_TMO_LSB 0x73 /* Watchdog Timeout Value LSB */
#define ITESIO_WDT_TMO_MSB 0x74 /* Watchdog Timeout Value MSB */
#define ITESIO_WDT_MAXTIMO 0xffff /* either seconds or minutes */
#define ITESIO_CHIPID1 0x20 /* Chip ID 1 */
#define ITESIO_CHIPID2 0x21 /* Chip ID 2 */
#define ITESIO_DEVREV 0x22 /* Device Revision */
#define ITESIO_ID8705 0x8705
#define ITESIO_ID8712 0x8712
#define ITESIO_ID8716 0x8716
#define ITESIO_ID8718 0x8718
#define ITESIO_ID8726 0x8726
/*
* Control registers for the Environmental Controller, relative
* to the Base Address Register.
*/
#define ITESIO_EC_ADDR 0x05
#define ITESIO_EC_DATA 0x06
/* Data registers */
#define ITESIO_EC_CONFIG 0x00
#define ITESIO_EC_ISR1 0x01
#define ITESIO_EC_ISR2 0x02
#define ITESIO_EC_ISR3 0x03
#define ITESIO_EC_SMI1 0x04
#define ITESIO_EC_SMI2 0x05
#define ITESIO_EC_SMI3 0x06
#define ITESIO_EC_IMR1 0x07
#define ITESIO_EC_IMR2 0x08
#define ITESIO_EC_IMR3 0x09
#define ITESIO_EC_VID 0x0a
#define ITESIO_EC_FAN_TDR 0x0b /* Fan Tachometer Divisor Register */
#define ITESIO_EC_FAN16_CER 0x0c /* Fan Tachometer 16-bit Counter Enable Register */
#define ITESIO_EC_VOLTENABLE 0x50
#define ITESIO_EC_TEMPENABLE 0x51
#define ITESIO_EC_FANMINBASE 0x10
#define ITESIO_EC_FANENABLE 0x13
#define ITESIO_EC_SENSORFANBASE 0x0d /* Fan from 0x0d to 0x0f */
#define ITESIO_EC_SENSORFANEXTBASE 0x18 /* Fan (MSB) from 0x18 to 0x1A */
#define ITESIO_EC_SENSORVOLTBASE 0x20 /* Voltage from 0x20 to 0x28 */
#define ITESIO_EC_SENSORTEMPBASE 0x29 /* Temperature from 0x29 to 0x2b */
#define ITESIO_EC_VIN0 0x20
#define ITESIO_EC_VIN1 0x21
#define ITESIO_EC_VIN2 0x22
#define ITESIO_EC_VIN3 0x23
#define ITESIO_EC_VIN4 0x24
#define ITESIO_EC_VIN5 0x25
#define ITESIO_EC_VIN6 0x26
#define ITESIO_EC_VIN7 0x27
#define ITESIO_EC_VBAT 0x28
#define ITESIO_EC_UPDATEVBAT 0x40 /* Update VBAT voltage reading */
#define ITESIO_EC_BEEPEER 0x5c /* Beep Event Enable Register */
/* High and Low limits for voltages */
#define ITESIO_EC_VIN0_HIGH_LIMIT 0x30
#define ITESIO_EC_VIN0_LOW_LIMIT 0x31
#define ITESIO_EC_VIN1_HIGH_LIMIT 0x32
#define ITESIO_EC_VIN1_LOW_LIMIT 0x33
#define ITESIO_EC_VIN2_HIGH_LIMIT 0x34
#define ITESIO_EC_VIN2_LOW_LIMIT 0x35
#define ITESIO_EC_VIN3_HIGH_LIMIT 0x36
#define ITESIO_EC_VIN3_LOW_LIMIT 0x37
#define ITESIO_EC_VIN4_HIGH_LIMIT 0x38
#define ITESIO_EC_VIN4_LOW_LIMIT 0x39
#define ITESIO_EC_VIN5_HIGH_LIMIT 0x3a
#define ITESIO_EC_VIN5_LOW_LIMIT 0x3b
#define ITESIO_EC_VIN6_HIGH_LIMIT 0x3c
#define ITESIO_EC_VIN6_LOW_LIMIT 0x3d
#define ITESIO_EC_VIN7_HIGH_LIMIT 0x3e
#define ITESIO_EC_VIN7_LOW_LIMIT 0x3f
/* High and Low limits for temperatures */
#define ITESIO_EC_TEMP0_HIGH_LIMIT 0x40
#define ITESIO_EC_TEMP0_LOW_LIMIT 0x41
#define ITESIO_EC_TEMP1_HIGH_LIMIT 0x42
#define ITESIO_EC_TEMP1_LOW_LIMIT 0x43
#define ITESIO_EC_TEMP2_HIGH_LIMIT 0x44
#define ITESIO_EC_TEMP2_LOW_LIMIT 0x45
#define ITESIO_EC_VREF (4096) /* Vref = 4.096 V */
struct itesio_softc {
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
bus_space_tag_t sc_ec_iot;
bus_space_handle_t sc_ec_ioh;
struct sysmon_wdog sc_smw;
struct sysmon_envsys *sc_sme;
envsys_data_t sc_sensor[IT_NUM_SENSORS];
uint16_t sc_hwmon_baseaddr;
bool sc_hwmon_mapped;
bool sc_hwmon_enabled;
bool sc_wdt_enabled;
uint16_t sc_chipid;
uint8_t sc_devrev;
};
#endif /* _DEV_ISA_ITSIO_ISAVAR_H_ */