NetBSD/sys/arch/vax/conf/GENERIC

222 lines
6.3 KiB
Plaintext

# $NetBSD: GENERIC,v 1.60 2000/03/09 02:05:07 matt Exp $
#
# GENERIC VAX configuration file; all supported devices.
#
include "arch/vax/conf/std.vax"
#ident "GENERIC-$Revision: 1.60 $"
# Here are all different supported CPU types listed.
options "VAX8600"
options "VAX8200"
options "VAX780"
options "VAX750"
options "VAX630" # MV II
options "VAX650" # MV III, 3600, 3800, 3900
options "VAX670" # VAX 4000/300
options "VAX410" # VS 2000
options "VAX43" # VS 3100/76
options "VAX46" # VS 4000/60
options "VAX48" # VS 4000 VLC
options "VAX49" # VS 4000/90
# Max users on system; this is just a hint
maxusers 8
# Kernel compiled-in symbolic debugger & system call tracer
#makeoptions DEBUG="-g"
#options DDB
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
options KTRACE
#options DIAGNOSTIC
#options DEBUG,KMEMSTATS,PMAPDEBUG,TRAPDEBUG
options SCSIVERBOSE # Verbose SCSI errors
# Pull in config fragments for kernel crypto. This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.
#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix
#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix
# Network support
#options GATEWAY
options INET
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
# All supported filesystem types
file-system FFS
file-system LFS
file-system MFS
file-system NFS
file-system FDESC
file-system KERNFS
file-system NULLFS
file-system OVERLAY # overlay file system
file-system PROCFS
file-system UMAPFS
file-system UNION
file-system CD9660
options QUOTA
#options FFS_EI # FFS Endian Independant support
#options SOFTDEP # FFS soft updates support.
options NFSSERVER
options NFS_BOOT_BOOTP,NFS_BOOT_DHCP # Use bootp <> dhcp
options NFS_BOOT_BOOTPARAM # Use the Sun way for netbooting.
# WS console uses VT100 terminal emulation
options WSEMUL_VT100
options WSDISPLAY_DEFAULTSCREENS=8
# System V shared memory & semaphores support.
options SYSVMSG
options SYSVSEM
options SYSVSHM
# Old compat stuff; needed to run 4.3BSD Reno programs.
# Note that if COMPAT_ULTRIX is set, you lose compatibility with
# 4.3BSD Reno programs and get Ultrix compatibility instead.
# (They cannot coexist).
options COMPAT_VAX1K # Must be present to run pre-1.4 binaries.
options COMPAT_43
options COMPAT_09
options COMPAT_10
options COMPAT_11
options COMPAT_12
options COMPAT_13
options COMPAT_14
#options COMPAT_ULTRIX
options COMPAT_IBCS2 # DEC SVR.3 compatilibity
options LKM
# Kernel(s) to compile
config netbsd root on ? type ?
mainbus0 at root
# All buses; from the beginning attached to mainbus.
abus0 at mainbus0 # Master bus on VAX 8600
sbi0 at mainbus0 # SBI, master bus on 11/780.
cmi0 at mainbus0 # 11/750 internal bus.
bi0 at mainbus0 # VAX 8200
vsbus0 at mainbus0 # All VAXstations
ibus0 at mainbus0 # All Microvax
#nbi0 at mainbus0 # VAX 8800
#xmi0 at mainbus0 # VAX 6000
# Vsbus, the virtual VAXstation bus, and possible devices.
le0 at vsbus0 csr 0x200e0000 # LANCE ethernet
ze0 at vsbus0 csr 0x20008000 # SGEC ethernet
dz0 at vsbus0 csr 0x200a0000 # DC-367 DZ-11 lookalike ctlr
dz0 at vsbus0 csr 0x25000000 # VS4000/90 serial line
#hdc0 at vsbus0 csr 0x200c0000 # HDC9224 MFM/floppy ctlr
ncr0 at vsbus0 csr 0x200c0080 # VS2000/3100 SCSI-ctlr
asc0 at vsbus0 csr 0x200c0080 # VS4000 SCSI-ctlr
ncr1 at vsbus0 csr 0x200c0180 # VS2000/3100 SCSI-ctlr
smg0 at vsbus0 csr 0x200f0000 # Small monochrome display ctlr.
#clr0 at vsbus0 csr 0x30000000 # 4- or 8-bitplans color graphics
#rd* at hdc0 drive? # RD5x disks
#ry* at hdc0 drive? # RX floppies
# Ibus, the internal bus on most Microvaxen
uba0 at ibus0 # Qbus adapter
ze0 at ibus0 # SGEC on-board ethernet
#shac0 at ibus0 # DSSI controller
# Devices connected at VAXBI
cpu* at bi? node? # KA820/KA825 cpu
mem* at bi? node? # Memory subsystems
#uba* at bi? node? # DWBUA BI-Unibus adapter
#ni* at bi? node? # DEBNA/DEBNT ethernet adapter
#kdb* at bi? node? # KDB50 MSCP disk ctlr
#mscpbus* at kdb?
# CMI (VAX 11/750)
mem* at cmi? tr? # Memory subsystems
uba* at cmi? tr? # Unibus adapters
mba* at cmi? tr? # Massbus adapters
# SBI (VAX 11/780, VAX 8600)
sbi* at abus0 # VAX 8600 can have up to 4 SBI's.
mem* at sbi? tr? # Memory subsystems
uba* at sbi? tr? # Unibus adapters
mba* at sbi? tr? # Massbus adapters
# Devices on Massbus adapters
hp* at mba? drive? # RM/RP disk drives
# Devices on Unibus/Qbus adapters
uda0 at uba? csr 0172150 # UDA50/RQDX?
uda1 at uba? csr 0160334
mtc0 at uba? csr 0174500 # Tape MSCP ctlr
#ts0 at uba? csr 0172520 # TS11/TSV05 tape.
#qd0 at uba? csr 0177400 # 4- or 8-bitplans color graphics
#qv0 at uba? csr 0177400 # Monochrome graphics
#de0 at uba? csr 0174510 # DELUA/DEUNA
qe0 at uba? csr 0174440 # DEQNA/DELQA
dhu0 at uba? csr 0160440 # DHU-11
dz0 at uba? csr 0160100 # DZ-11
dl0 at uba? csr 0176500 # DL-11
# MSCP devices
mscpbus* at uda?
mscpbus* at mtc?
#mscpbus* at kdb?
ra* at mscpbus? drive? # MSCP disk
rx* at mscpbus? drive? # MSCP floppy
mt* at mscpbus? drive? # MSCP tape
# VS2000 builtin MFM controller (HDC9224)
#hdc0 at vsbus0 # The strange builtin MFM controller
# SCSI devices
scsibus* at asc?
scsibus* at ncr?
sd* at scsibus? target? lun?
st* at scsibus? target? lun?
cd* at scsibus? target? lun?
ch* at scsibus? target? lun?
ss* at scsibus? target? lun?
uk* at scsibus? target? lun?
# VAXstation graphics support
wsdisplay0 at smg0
#wsdisplay0 at clr0
#wsdisplay0 at qd0
#wsdisplay0 at qv0
lkc0 at dz0
pseudo-device loop 1
pseudo-device pty 48
pseudo-device bpfilter 8 # Not supported by de yet.
pseudo-device sl 2
pseudo-device ppp 2
pseudo-device tun 2
#pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
pseudo-device tb 1
pseudo-device vnd 4
pseudo-device ccd 4
#pseudo-device raid 4 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components
# rnd is EXPERIMENTAL
#pseudo-device rnd # /dev/random and in-kernel generator