248 lines
9.0 KiB
Plaintext
248 lines
9.0 KiB
Plaintext
NetBSD/i386 1.2A runs on ISA (AT-Bus), EISA, PCI, and VL-bus systems
|
|
with 386-family processors, with or without math coprocessors. It
|
|
does NOT support MCA systems, such as some IBM PS/2 systems. The
|
|
minimal configuration is said to require 4M of RAM and 50M of disk space,
|
|
though we do not know of anyone running with a system quite this minimal today.
|
|
To install the entire system requires much more disk space, and to run X
|
|
or compile the system, more RAM is recommended. (4M of RAM will
|
|
actually allow you to run X and/or compile, but it won't be speedy.
|
|
Note that until you have around 16M of RAM, getting more RAM is more
|
|
important than getting a faster CPU.)
|
|
|
|
Supported devices include:
|
|
Floppy controllers.
|
|
MFM, ESDI, IDE, and RLL hard disk controllers.
|
|
SCSI host adapters:
|
|
[Adaptec host adapters only on kcadp floppy]
|
|
Adaptec AHA-154xA, -B, -C, and -CF
|
|
Adaptec AHA-174x
|
|
Adaptec AIC-6260 and AIC-6360 based boards, including
|
|
the Adaptec AHA-152x and the SoundBlaster SCSI
|
|
host adapter. (Note that you cannot boot from
|
|
these boards if they do not have a boot ROM;
|
|
only the AHA-152x and motherboards using this chip
|
|
are likely to be bootable, consequently.)
|
|
Adaptec AHA-2x4x[U][W] cards and some onboard PCI designs
|
|
using the AIC78X0 chip. There is a known problem
|
|
using this driver with AHA-2742 cards or AIC7770 or
|
|
AIC78[56]0 based embedded designs and multiple
|
|
targets, due to resource contention which is not
|
|
handled well by NetBSD's higher-level SCSI subsystem.
|
|
Adaptec AHA-3940[U][W] cards [b]
|
|
Buslogic 54x (Adaptec AHA-154x clones; driver on kcadp floppy)
|
|
|
|
[Other host adapters only on kcoth floppy]
|
|
BusLogic 445, 74x, 9xx (But not the new "FlashPoint" series
|
|
of BusLogic SCSI adapters)
|
|
Seagate/Future Domain ISA SCSI adapter cards, including
|
|
ST01/02
|
|
Future Domain TMC-885
|
|
Future Domain TMC-950
|
|
Symbios Logic (NCR) 53C8xx-based PCI SCSI host adapters:
|
|
Acculogic PCIpport
|
|
ASUS SC-200 (requires NCR BIOS on motherboard)
|
|
ASUS SP3[G] motherboard onboard SCSI
|
|
DEC Celebris XL/590 onboard SCSI
|
|
Lomas Data SCSI adapters
|
|
NCR/SYM 8125 (and its many clones; be careful, some
|
|
of these cards have a jumper to set
|
|
the PCI interrupt; leave it on INT A!)
|
|
Promise DC540 (a particularly common OEM model of
|
|
the SYM 8125)
|
|
Tyan Yorktown
|
|
Ultrastor 14f, 34f, and (possibly) 24f
|
|
Western Digital WD7000 SCSI host adapters (ISA cards only)
|
|
|
|
MDA, CGA, VGA, SVGA, and HGC Display Adapters. (Note that not
|
|
all of the display adapters NetBSD/i386 can work with
|
|
are supported by X. See the XFree86 FAQ for more
|
|
information.)
|
|
Serial ports:
|
|
8250/16450-based ports
|
|
16550/16650/16750-based ports
|
|
AST-style 4-port serial cards [*]
|
|
BOCA 8-port serial cards [*]
|
|
IBM PC-RT 4-port serial cards [*]
|
|
Single-port Hayes ESP serial cards [*]
|
|
Parallel ports.
|
|
Ethernet adapters:
|
|
AMD LANCE and PCnet-based ISA Ethernet adapters [*], including:
|
|
Novell NE1500T
|
|
Novell NE2100
|
|
Kingston 21xx
|
|
AMD PCnet-based PCI Ethernet adapters, including:
|
|
Addtron AE-350
|
|
BOCALANcard/PCI
|
|
SVEC FD0455
|
|
X/Lan Add-On Adapter
|
|
IBM #13H9237 PCI Ethernet Adapter
|
|
AT&T StarLAN 10, EN100, and StarLAN Fiber
|
|
3COM 3c501
|
|
3COM 3c503
|
|
3COM 3c505 [*]
|
|
3COM 3c507
|
|
3COM 3c509, 3c579, and 3c59X
|
|
Digital DC21x4x-based PCI Ethernet adapters, including:
|
|
Cogent EM1X0, EM960 (a.k.a. Adaptec ANA-69XX)
|
|
Cogent EM964 [b]
|
|
Cogent EM4XX [b]
|
|
Compex Readylink PCI
|
|
DANPEX EN-9400P3
|
|
Digital Celebris GL, GLST on-board ethernet
|
|
Digital (DEC) PCI Ethernet/Fast Ethernet adapters (all)
|
|
JCIS Condor JC1260
|
|
Linksys PCI Fast Ethernet
|
|
SMC EtherPower 10, 10/100 (PCI only!)
|
|
SMC EtherPower^2 [b]
|
|
SVEC PN0455
|
|
SVEC FD1000-TP
|
|
Znyx ZX34X
|
|
BICC Isolan [* and not recently tested]
|
|
Intel EtherExpress 16
|
|
Intel EtherExpress PRO/10 [*]
|
|
SMC/WD 8003, 8013, and the SMC "Elite16" ISA boards
|
|
SMC/WD 8216 (the SMC "Elite16 Ultra" ISA boards)
|
|
Novell NE1000, NE2000
|
|
FDDI adapters:
|
|
Digital DEFPA PCI FDDI adapters [*] [+]
|
|
Digital DEFEA EISA FDDI adapters [*] [+]
|
|
Tape drives:
|
|
Most SCSI tape drives
|
|
QIC-02 and QIC-36 format (Archive- and Wangtek-
|
|
compatible) tape drives [*] [+]
|
|
CD-ROM drives:
|
|
Non-IDE Mitsumi CD-ROM drives [*] [+]
|
|
[Note: The Mitsumi driver device probe is known
|
|
to cause trouble with several devices!]
|
|
Most SCSI CD-ROM drives
|
|
Mice:
|
|
"Logitech"-style bus mice [*] [+]
|
|
"Microsoft"-style bus mice [*] [+]
|
|
"PS/2"-style mice [*] [+]
|
|
Serial mice (no kernel support necessary)
|
|
Sound Cards:
|
|
SoundBlaster [*] [+]
|
|
Gravis Ultrasound and Ultrasound Max [*] [+]
|
|
(But not Gravis Ultrasound Plug&Play)
|
|
[The following drivers are not extensively tested]
|
|
Personal Sound System [*] [+]
|
|
Windows Sound System [*] [+]
|
|
ProAudio Spectrum [*] [+]
|
|
Miscellaneous:
|
|
APM power management
|
|
|
|
Drivers for hardware marked with "[*]" are NOT included on the
|
|
distribution floppies. Except as noted above, all other drivers are
|
|
present on both kernel-copy disks. Also, at the present time, the
|
|
distributed kernels support only one SCSI host adapter per machine.
|
|
NetBSD normally allows more, though, so if you have more than one, you
|
|
can use all of them by compiling a custom kernel once NetBSD is
|
|
installed.
|
|
|
|
|
|
Support for devices marked with "[+]" IS included in the "generic" kernels,
|
|
although it is not in the kernels which are on the distribution floppies.
|
|
|
|
Support for devices marked with "[b]" requires BIOS support for PCI-PCI
|
|
bridging on your motherboard. Most reasonably modern Pentium motherboards
|
|
have this support, or can acquire it via a BIOS upgrade.
|
|
|
|
Hardware the we do NOT currently support, but get many questions
|
|
about:
|
|
AMD PCscsi SCSI host adapters (though the PCnet portion of the
|
|
PCnet-SCSI works fine)
|
|
Intel EtherExpress 100 Fast Ethernet adapters.
|
|
Multiprocessor Pentium and Pentium Pro systems. (Though they should
|
|
run fine using one processor only.)
|
|
NCR 5380-based SCSI host adapters.
|
|
PCI WD-7000 SCSI host adapters.
|
|
PCMCIA ("PC Card") devices, including some miniature "IDE" hard disks.
|
|
QIC-40 and QIC-80 tape drives. (Those are the tape drives
|
|
that connect to the floppy disk controller.)
|
|
|
|
We are planning future support for many of these devices.
|
|
|
|
To be detected by the distributed kernels, the devices must
|
|
be configured as follows:
|
|
|
|
Device Name Port IRQ DRQ Misc
|
|
------ ---- ---- --- --- ----
|
|
Serial ports com0 0x3f8 4 [8250/16450/16550/clones]
|
|
com1 0x2f8 3 [8250/16450/16550/clones]
|
|
com2 0x3e8 5 [8250/16450/16550/clones]
|
|
|
|
Parallel ports lpt0 0x378 7 [interrupt-driven or polling]
|
|
lpt1 0x278 [polling only]
|
|
lpt2 0x3bc [polling only]
|
|
|
|
MFM/ESDI/IDE/RLL hard disk controller
|
|
wdc0 0x1f0 14 [supports two disks]
|
|
|
|
Floppy controller
|
|
fdc0 0x3f0 6 2 [supports two disks]
|
|
|
|
AHA-154x, AHA-174x (in compatibility mode), or BT-54x SCSI host adapters
|
|
aha0 0x330 any any [only on kcadp kernel floppy]
|
|
aha1 0x334 any any [only on kcadp kernel floppy]
|
|
|
|
AHA-174x SCSI host adapters (in enhanced mode)
|
|
ahb0 any any any [only on kcadp kernel floppy]
|
|
|
|
AHA-152x, AIC-6260- or AIC-6360-based SCSI host adapters
|
|
aic0 0x340 11 6 [only on kcadp kernel floppy]
|
|
|
|
AHA-2X4X or AIC-7XXX-based SCSI host adapters
|
|
ahc0 any any any [only on kcadp kernel floppy]
|
|
|
|
Bus Logic BT445, BT74x, or BT9xx SCSI host adapters
|
|
bt0 0x330 any any [only on kcoth kernel floppy]
|
|
bt1 0x334 any any
|
|
|
|
Symbios Logic/NCR 53C8xx based PCI SCSI host adapters
|
|
ncr0 any any any [only on kcoth kernel floppy]
|
|
|
|
Ultrastor 14f, 24f (if it works), or 34f SCSI host adapters
|
|
uha0 0x330 any any [only on kcoth kernel floppy]
|
|
uha1 0x334 any any [only on kcoth kernel floppy]
|
|
|
|
Western Digital WD7000 based ISA SCSI host adapters
|
|
wds0 0x350 15 6 [only on kcoth kernel floppy]
|
|
wds1 0x358 11 5 [only on kcoth kernel floppy]
|
|
|
|
SCSI disks sd0 first SCSI disk (by SCSI id)
|
|
sd1 second SCSI disk (by SCSI id)
|
|
sd2 third SCSI disk (by SCSI id)
|
|
sd3 fourth SCSI disk (by SCSI id)
|
|
|
|
SCSI tapes st0 first SCSI tape (by SCSI id)
|
|
st1 second SCSI tape (by SCSI id)
|
|
|
|
SCSI CD-ROMs cd0 first SCSI CD-ROM (by SCSI id)
|
|
cd1 second SCSI CD-ROM (by SCSI id)
|
|
|
|
SMC/WD 8003, 8013, Elite16, and Elite16 Ultra Ethernet boards, 3c503,
|
|
Novell NE1000, or NE2000 Ethernet boards
|
|
ed0 0x280 2 iomem 0xd0000
|
|
ed1 0x250 2 iomem 0xd8000
|
|
ed2 0x300 10 iomem 0xcc000
|
|
|
|
3COM 3c509 or 3COM 3c579 Ethernet boards
|
|
ep0 any any
|
|
|
|
3COM 3x59X PCI Ethernet boards
|
|
ep0 any any [you must assign an interrupt in your
|
|
PCI BIOS, or let it do so for you]
|
|
|
|
AT&T StarLAN 10, EN100, or StarLAN Fiber, 3COM 3c507 or Intel
|
|
EtherExpress 16 Ethernet boards
|
|
ie0 0x360 7 iomem 0xd0000
|
|
ie1 0x300 10 iomem 0xd0000
|
|
|
|
PCnet-PCI based Ethernet boards; see above for partial list
|
|
le0 any any [you must assign an interrupt in your
|
|
PCI BIOS, or let it do so for you]
|
|
|
|
DC21x4x based Ethernet boards; see above for partial list
|
|
de0 any any [you must assign an interrupt in your
|
|
PCI BIOS, or let it do so for you]
|