NetBSD/sys/arch/i386/stand/netboot/Makefile

85 lines
2.4 KiB
Makefile

# $NetBSD: Makefile,v 1.24 2001/12/12 01:49:45 tv Exp $
S= ${.CURDIR}/../../../../
BASE= netboot
PROG= ${BASE}.rom
NOMAN= # defined
NEWVERSWHAT= "Network Boot"
SRCS= main.c devopen.c conf.c dev_net.c exec.c
CLEANFILES+= ${ROMSTART} ${BASE}.bin ${BASE}.sym
#CPPFLAGS+= -DDEBUG
#CPPFLAGS+= -DNET_DEBUG
CPPFLAGS+= -DSUPPORT_BOOTP -DSUPPORT_DHCP
CPPFLAGS+= -DSUPPORT_TFTP
#CPPFLAGS+= -DSUPPORT_RARP -DSUPPORT_BOOTPARAM
#CPPFLAGS+= -DSUPPORT_NFS -DNFS_NOSYMLINK
#uncomment if there are problems with memory detection
#CPPFLAGS+= -DCONSERVATIVE_MEMDETECT
#CFLAGS= -O2 -fomit-frame-pointer -fno-defer-pop
CFLAGS+= -Wall
# XXX should go into library
#.PATH: ${.CURDIR}/../libsa
#SRCS+= nfs.c
#CPPFLAGS+= -I${.CURDIR}/../libsa
#ROM_SIZE= 16384
ROM_SIZE= 32768
RELOC= 90000
CPPFLAGS+= -DBOOTROM -DRELOC=0x$(RELOC)
.PATH: ${.CURDIR}/../lib/netif
#USE_NETIF= 3c509
#USE_NETIF= 3c590 #handles 3c900 TPO / combo and 3c905 TX too
# uncomment next and one of the following to make a PCI expansion ROM for 3com
#CPPFLAGS+= -DPCIROM -DPCI_VID=0x10b7 -DPCI_CLASS=0x020000
#CPPFLAGS+= -DPCI_DID=0x5900 # 3c590
#CPPFLAGS+= -DPCI_DID=0x9000 # 3c900 TPO
#CPPFLAGS+= -DPCI_DID=0x9001 # 3c900 combo
#CPPFLAGS+= -DPCI_DID=0x9050 # 3c905 TX
USE_NETIF= 3c90xb
# uncomment next and one of the following to make a PCI expansion ROM for 3com
CPPFLAGS+= -DPCIROM -DPCI_VID=0x10b7 -DPCI_CLASS=0x020000
#CPPFLAGS+= -DPCI_DID=0x9005 # 3c900b combo
#CPPFLAGS+= -DPCI_DID=0x9055 # 3c905b TX
CPPFLAGS+= -DPCI_DID=0x9058 # 3c905b combo
#USE_NETIF= pcnet_pci
# uncomment the following to make a PCI expansion ROM for PCNET-PCI
#CPPFLAGS+= -DPCIROM -DPCI_VID=0x1022 -DPCI_DID=0x2000 -DPCI_CLASS=0x020000
#USE_NETIF= pcnet_isapnp #boot device passing to kernel broken
#USE_NETIF= wd80x3 #and uncomment at least one of the two following lines
#CPPFLAGS+= -DSUPPORT_WD80X3
#CPPFLAGS+= -DSUPPORT_SMC_ULTRA
#USE_NETIF= i82557
#CPPFLAGS+= -DPCIROM -DPCI_VID=0x8086 -DPCI_DID=0x1229 -DPCI_CLASS=0x020000
#USE_NETIF= ne2000
#CPPFLAGS+= -DBASEREG=0x300
.include "../lib/netif/Makefile.inc"
SAMISCCPPFLAGS+= -DHEAP_START=0x10000 -DHEAP_LIMIT=0x40000
SAMISCCPPFLAGS+= -DNFS_NOSYMLINK -DUDP_NO_CKSUM
#SAMISCMAKEFLAGS= SA_USE_CREAD=yes
#I386MISCCPPFLAGS+= -DDISK_DEBUG
#I386MISCCPPFLAGS+= -DSUPPORT_SERIAL -DDIRECT_SERIAL -DCOMCONS_KEYPRESS
I386MISCMAKEFLAGS= I386_INCLUDE_DISK=no I386_INCLUDE_BUS=yes
VERSIONFILE= ${.CURDIR}/version
.include "../Makefile.booters"
conf.o dev_net.o: Makefile