NetBSD/sys/scsi/scsi_tape.h
thorpej 5b51ec5cc8 Honor cache request and implement erase command, and add the SCSI tape
device configuration page.  Fixes PRs 807, 1201, and 1705.
From John Kohl <jtk@kolvir.blrc.ma.us>.
1996-01-11 03:36:34 +00:00

255 lines
8.4 KiB
C

/* $NetBSD: scsi_tape.h,v 1.7 1996/01/11 03:36:34 thorpej Exp $ */
/*
* Copyright (c) 1994 Charles Hannum. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Charles Hannum.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Originally written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*/
/*
* SCSI tape interface description
*/
#ifndef _SCSI_TAPE_H_
#define _SCSI_TAPE_H_ 1
/*
* SCSI command formats
*/
#define READ 0x08
#define WRITE 0x0a
struct scsi_rw_tape {
u_char opcode;
u_char byte2;
#define SRW_FIXED 0x01
u_char len[3];
u_char control;
};
#define SPACE 0x11
struct scsi_space {
u_char opcode;
u_char byte2;
#define SS_CODE 0x03
#define SP_BLKS 0x00
#define SP_FILEMARKS 0x01
#define SP_SEQ_FILEMARKS 0x02
#define SP_EOM 0x03
u_char number[3];
u_char control;
};
#define WRITE_FILEMARKS 0x10
struct scsi_write_filemarks {
u_char opcode;
u_char byte2;
u_char number[3];
u_char control;
};
#define REWIND 0x01
struct scsi_rewind {
u_char opcode;
u_char byte2;
#define SR_IMMED 0x01
u_char unused[3];
u_char control;
};
#define LOAD 0x1b
struct scsi_load {
u_char opcode;
u_char byte2;
#define SL_IMMED 0x01
u_char unused[2];
u_char how;
#define LD_UNLOAD 0x00
#define LD_LOAD 0x01
#define LD_RETENSION 0x02
u_char control;
};
#define ERASE 0x19
struct scsi_erase {
u_char opcode;
u_char byte2;
#define SE_LONG 0x01
#define SE_IMMED 0x02
u_char unused[3];
u_char control;
};
#define READ_BLOCK_LIMITS 0x05
struct scsi_block_limits {
u_char opcode;
u_char byte2;
u_char unused[3];
u_char control;
};
struct scsi_block_limits_data {
u_char reserved;
u_char max_length_2; /* Most significant */
u_char max_length_1;
u_char max_length_0; /* Least significant */
u_char min_length_1; /* Most significant */
u_char min_length_0; /* Least significant */
};
/* See SCSI-II spec 9.3.3.1 */
struct scsi_tape_dev_conf_page {
u_char pagecode; /* 0x10 */
u_char pagelength; /* 0x0e */
u_char byte2;
#define SMT_CAP 0x40 /* change active partition */
#define SMT_CAF 0x20 /* change active format */
#define SMT_AFMASK 0x1f /* active format mask */
u_char active_partition;
u_char wb_full_ratio;
u_char rb_empty_ratio;
u_char wrdelay_time_1; /* MSB */
u_char wrdelay_time_0; /* LSB */
u_char byte8;
#define SMT_DBR 0x80 /* data buffer recovery */
#define SMT_BIS 0x40 /* block identifiers supported */
#define SMT_RSMK 0x20 /* report setmarks */
#define SMT_AVC 0x10 /* automatic velocity control */
#define SMT_SOCF_MASK 0xc0 /* stop on consecutive formats */
#define SMT_RBO 0x20 /* recover buffer order */
#define SMT_REW 0x10 /* report early warning */
u_char gap_size;
u_char byte10;
#define SMT_EODDEFINED 0xe0 /* EOD defined */
#define SMT_EEG 0x10 /* enable EOD generation */
#define SMT_SEW 0x80 /* synchronize at early warning */
u_char ew_bufsize_2; /* MSB */
u_char ew_bufsize_1; /* ... */
u_char ew_bufsize_0; /* LSB */
u_char sel_comp_alg;
#define SMT_COMP_NONE 0x00
#define SMT_COMP_DEFAULT 0x01
u_char reserved;
};
/* defines for the device specific byte in the mode select/sense header */
#define SMH_DSP_SPEED 0x0F
#define SMH_DSP_BUFF_MODE 0x70
#define SMH_DSP_BUFF_MODE_OFF 0x00
#define SMH_DSP_BUFF_MODE_ON 0x10
#define SMH_DSP_BUFF_MODE_MLTI 0x20
#define SMH_DSP_WRITE_PROT 0x80
/* A special for the CIPHER ST150S(old drive) */
struct block_desc_cipher {
u_char density;
u_char nblocks[3];
u_char reserved;
u_char blklen[3];
u_char other;
#define ST150_SEC 0x01 /* soft error count */
#define SR150_AUI 0x02 /* autoload inhibit */
};
/**********************************************************************
from the scsi2 spec
Value Tracks Density(bpi) Code Type Reference Note
0x1 9 800 NRZI R X3.22-1983 2
0x2 9 1600 PE R X3.39-1986 2
0x3 9 6250 GCR R X3.54-1986 2
0x5 4/9 8000 GCR C X3.136-1986 1
0x6 9 3200 PE R X3.157-1987 2
0x7 4 6400 IMFM C X3.116-1986 1
0x8 4 8000 GCR CS X3.158-1986 1
0x9 18 37871 GCR C X3B5/87-099 2
0xA 22 6667 MFM C X3B5/86-199 1
0xB 4 1600 PE C X3.56-1986 1
0xC 24 12690 GCR C HI-TC1 1,5
0xD 24 25380 GCR C HI-TC2 1,5
0xF 15 10000 GCR C QIC-120 1,5
0x10 18 10000 GCR C QIC-150 1,5
0x11 26 16000 GCR C QIC-320(525?) 1,5
0x12 30 51667 RLL C QIC-1350 1,5
0x13 1 61000 DDS CS X3B5/88-185A 4
0x14 1 43245 RLL CS X3.202-1991 4
0x15 1 45434 RLL CS ECMA TC17 4
0x16 48 10000 MFM C X3.193-1990 1
0x17 48 42500 MFM C X3B5/91-174 1
where Code means:
NRZI Non Return to Zero, change on ones
GCR Group Code Recording
PE Phase Encoded
IMFM Inverted Modified Frequency Modulation
MFM Modified Frequency Modulation
DDS Dat Data Storage
RLL Run Length Encoding
where Type means:
R Reel-to-Reel
C Cartridge
CS cassette
where Notes means:
1 Serial Recorded
2 Parallel Recorded
3 Old format know as QIC-11
4 Helical Scan
5 Not ANSI standard, rather industry standard.
********************************************************************/
#define HALFINCH_800 0x01
#define HALFINCH_1600 0x02
#define HALFINCH_6250 0x03
#define QIC_11 0x04 /* from Archive 150S Theory of Op. XXX */
#define QIC_24 0x05 /* may be bad, works for CIPHER ST150S XXX */
#define QIC_120 0x0f
#define QIC_150 0x10
#define QIC_320 0x11
#define QIC_525 0x11
#define QIC_1320 0x12
#define DDS 0x13
#define DAT_1 0x13
#endif /* _SCSI_TAPE_H_ */