NetBSD/sys/dev/scsipi/ses.h

175 lines
5.6 KiB
C

/* $NetBSD: ses.h,v 1.3 2005/12/11 12:23:51 christos Exp $ */
/*
* Copyright (C) 2000 National Aeronautics & Space Administration
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#define SESIOC (('s' - 040) << 8)
#define SESIOC_GETNOBJ _IO(SESIOC, 1)
#define SESIOC_GETOBJMAP _IO(SESIOC, 2)
#define SESIOC_GETENCSTAT _IO(SESIOC, 3)
#define SESIOC_SETENCSTAT _IO(SESIOC, 4)
#define SESIOC_GETOBJSTAT _IO(SESIOC, 5)
#define SESIOC_SETOBJSTAT _IO(SESIOC, 6)
#define SESIOC_GETTEXT _IO(SESIOC, 7)
#define SESIOC_INIT _IO(SESIOC, 8)
/*
* Platform Independent Definitions for SES devices.
*/
/*
* SCSI Based Environmental Services Application Defines
*
* Based almost entirely on SCSI-3 SES Revision 8A specification,
* but slightly abstracted as the underlying device may in fact
* be a SAF-TE or vendor unique device.
*/
/*
* SES Driver Operations:
* (The defines themselves are platform and access method specific)
*
* SESIOC_GETNOBJ
* SESIOC_GETOBJMAP
* SESIOC_GETENCSTAT
* SESIOC_SETENCSTAT
* SESIOC_GETOBJSTAT
* SESIOC_SETOBJSTAT
* SESIOC_INIT
*
*
* An application finds out how many objects an SES instance
* is managing by performing a SESIOC_GETNOBJ operation. It then
* performs a SESIOC_GETOBJMAP to get the map that contains the
* object identifiers for all objects (see ses_object below).
* This information is static.
*
* The application may perform SESIOC_GETOBJSTAT operations to retrieve
* status on an object (see the ses_objstat structure below), SESIOC_SETOBJSTAT
* operations to set status for an object.
*
* Similarly overall enclosure status me be fetched or set via
* SESIOC_GETENCSTAT or SESIOC_SETENCSTAT operations (see ses_encstat below).
*
* Readers should note that there is nothing that requires either a set
* or a clear operation to actually latch and do anything in the target.
*
* A SESIOC_INIT operation causes the enclosure to be initialized.
*/
typedef struct {
unsigned int obj_id; /* Object Identifier */
unsigned char subencid; /* SubEnclosure ID */
unsigned char object_type; /* Object Type */
} ses_object;
/* Object Types */
#define SESTYP_UNSPECIFIED 0x00
#define SESTYP_DEVICE 0x01
#define SESTYP_POWER 0x02
#define SESTYP_FAN 0x03
#define SESTYP_THERM 0x04
#define SESTYP_DOORLOCK 0x05
#define SESTYP_ALARM 0x06
#define SESTYP_ESCC 0x07 /* Enclosure SCC */
#define SESTYP_SCC 0x08 /* SCC */
#define SESTYP_NVRAM 0x09
#define SESTYP_UPS 0x0b
#define SESTYP_DISPLAY 0x0c
#define SESTYP_KEYPAD 0x0d
#define SESTYP_SCSIXVR 0x0f
#define SESTYP_LANGUAGE 0x10
#define SESTYP_COMPORT 0x11
#define SESTYP_VOM 0x12
#define SESTYP_AMMETER 0x13
#define SESTYP_SCSI_TGT 0x14
#define SESTYP_SCSI_INI 0x15
#define SESTYP_SUBENC 0x16
/*
* Overall Enclosure Status
*/
typedef unsigned char ses_encstat;
#define SES_ENCSTAT_UNRECOV 0x1
#define SES_ENCSTAT_CRITICAL 0x2
#define SES_ENCSTAT_NONCRITICAL 0x4
#define SES_ENCSTAT_INFO 0x8
/*
* Object Status
*/
typedef struct {
unsigned int obj_id;
unsigned char cstat[4];
} ses_objstat;
/* Summary SES Status Defines, Common Status Codes */
#define SES_OBJSTAT_UNSUPPORTED 0
#define SES_OBJSTAT_OK 1
#define SES_OBJSTAT_CRIT 2
#define SES_OBJSTAT_NONCRIT 3
#define SES_OBJSTAT_UNRECOV 4
#define SES_OBJSTAT_NOTINSTALLED 5
#define SES_OBJSTAT_UNKNOWN 6
#define SES_OBJSTAT_NOTAVAIL 7
/*
* For control pages, cstat[0] is the same for the
* enclosure and is common across all device types.
*
* If SESCTL_CSEL is set, then PRDFAIL, DISABLE and RSTSWAP
* are checked, otherwise bits that are specific to the device
* type in the other 3 bytes of cstat or checked.
*/
#define SESCTL_CSEL 0x80
#define SESCTL_PRDFAIL 0x40
#define SESCTL_DISABLE 0x20
#define SESCTL_RSTSWAP 0x10
/* Control bits, Device Elements, byte 2 */
#define SESCTL_DRVLCK 0x40 /* "DO NOT REMOVE" */
#define SESCTL_RQSINS 0x08 /* RQST INSERT */
#define SESCTL_RQSRMV 0x04 /* RQST REMOVE */
#define SESCTL_RQSID 0x02 /* RQST IDENT */
/* Control bits, Device Elements, byte 3 */
#define SESCTL_RQSFLT 0x20 /* RQST FAULT */
#define SESCTL_DEVOFF 0x10 /* DEVICE OFF */
/* Control bits, Generic, byte 3 */
#define SESCTL_RQSTFAIL 0x40
#define SESCTL_RQSTON 0x20
/*
* Getting text for an object type is a little
* trickier because it's string data that can
* go up to 64 KBytes. Build this union and
* fill the obj_id with the id of the object who's
* help text you want, and if text is available,
* obj_text will be filled in, null terminated.
*/
typedef union {
unsigned int obj_id;
char obj_text[1];
} ses_hlptxt;